Waht are differances etweent structures and tables

plz answer this questions

Hi,
Basiclly, a structure does not have data and table does. A structure is a set of fields, and you can access that fields in your program using:
structure-field1 = value1.
structure-fiels2 = value2.
structure-fieldn = valuen.
So, you can not access an structure by SE16, it's not make sense. You can view the definitions of structure using SE11 transaction.
Also, structures cannot store group of records But it can able to hold a SINGLE record.
Whereas,
SAP table is a place where the data can be stored which uses any SAP structure.
watch this link from sap help also.
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/ac/3547360f2ea61fe10000009b38f839/frameset.">http://help.sap.com/saphelp_47x200/helpdata/en/ac/3547360f2ea61fe10000009b38f839/frameset.</a>
Regards,
Gaurav
<b>Reward points if helpful</b>

Similar Messages

Difference between Info structure and Table

Hi Friends
I need to know difference between info structure and table (updating a table using a scheduled program),Which one of this is better and why?
Please help me to get the Pros and Cons of the two available approach.
Thanks
Mitesh

Hi,
No different, these are just transparent tables like any other. You can select data from them the same as any other transparent table.
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4342729&messageID=1424611
https://forums.sdn.sap.com/click.jspa?searchID=4342729&messageID=3609095
Regards

Differrences between structure and table in data dictionary in ABAP?

What is the differrences between structure and table in data dictionary in ABAP?
are they same?

Tables :
1. The place where the data is stored so that you can retrieve at any time.
2. There can be more than one record stored
Structures :
1. The data / info stays only during the runtime of the application and will not get stored at all during the run time ....
2. Only one record can be stored at the runtime .....
A structure forms the skeleton of the table.
A structure comprises components i.e., fields. Types are defined for the components A component can refer to an elementary type (via a data element or by directly specifying the data type and length in the structure definition), another structure or a table type. A structure can therefore be nested to any depth
Tables can be defined independently of the database in the ABAP Dictionary. The fields of the table are defined with their (database-independent) data types and lengths.
When the table is activated, a physical table definition is created in the database for the table definition stored in the ABAP Dictionary. The table definition is translated from the ABAP Dictionary to a definition of the particular database.

What are the delta mechanisms and tables used for Lo Extraction & COPA

Hi all
what are the delta mechanisms and tables used for Lo Extraction & COPA.
please explain clealry.
Thanks & Regards,
James

James,
Please go through Roberto's weblog :
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Anyways,
As you know LO cockpit consists of different modules(MM, PP, SD, etc)
They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
Assign points if helpful
Kalyan

What are the logical structure and physical structure in oracle

what are the logical structure and physical structure in oracle and how can allocate a DB block size as default size is 8192?

From the Concepts Guide
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/toc.htm
The physical structures are:
Datafiles
Control Files
Redo Log Files
Archive Log Files
Parameter Files
Alert and Trace Log Files
Backup Files
The Logical Structures are:
Tablespaces
Oracle Data Blocks
Extents
Segments

Calrification of structure and table type

hai experts,
what is the difference between STRUCTURE AND TABLE TYPE?

Refer this for TABLE TYPE
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
STRUCTURE
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb2d74358411d1829f0000e829fbfe/content.htm
SE11, In structre u <b>cant maintain any values</b>. Its just used as a refernce.
In tables u can maintain values.

Extractor andExtract structure and table Relation

Hi All,
Is there any system table which provides the Datasource/Extractor/ Extract
structure and table Relation Information.
For ex:
Data source 2LIS_02_ITM uses following tables for data
EKKO
EKPO

Hi Murali,
I'm not really sure if there exists a table to give the information that you've asked for...
Let me to tell you something to find out the tables referred in a datasource.
Execute your datasource in RSA3 in Debug mode. This will give you the details of the tables used by that datasource.
assign points if useful ***
Thanks,
Raj

How can we use IMPORT-EXPORT as structure and TABLES parameters?

Hello Sir,
I have used SAPRFC with single IMPORT and EXPORT parameter.
Could anybody give me an example in I can use IMPORT/EXPORT as structure and TABLE parameter as input?
of course from/to PHP.
Regards,
RH

Thanks

What are different between gateway and mangement server in scom ?

Hi all,
can anyone let me know What are different between gateway and mangement server in scom ?
thanks,
Sengottuvel M

Hi,
Hope this can answer you question
About Gateway Servers in Operations Manager
http://technet.microsoft.com/en-us/library/hh212823.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

What are different vru types and their functions

Dear experts,
what are different vru types and their functions

Hi,
just hit the Help button in "Network VRU Explorer" in ICM Configuration Manager.
If you wish to see even more details, take a look at the following article:
http://www.ciscopress.com/articles/article.asp?p=1822061&seqNum=2
HTH
G.

Extract structure and table

Hi Experts,
How to know the fields of a extract structure are populated data from which tables?
Thanks,
Bill

Hi,
Datasource / tables in the source system
Go to RSA2 (DS Repository) in your source system and display your source system.
If Extraction Method is 'V' - you are lucky and you see table name where data is taken from.
If it is F* - function module is used, and you have to go thru its code to see all the tables it uses and logic how data is
processed.
Ext. Meth   Short text
V                 Transparent Table or DB View
D                  Fixed Domain Value
F1                Function Module (Complete Interface)
F2                Function Module (Simple Interface)
Q                 Extraction Using ABAP Query
A                 DataSource Append
or
Table ROOSOURCE in ERP.
Relevant fields EXMETHOD, EXTRACTOR.
IF EXMETHOD = V, EXTRACTOR is view or tablename
IF EXMETHOD = D, EXTRACTOR is name of domain
IF EXMETHOD = F1, F2 EXTRACTOR is name of FM
IF EXMETHOD = Q EXTRACTOR is name of Info set
OR
Since you have the extract structure and the extractor, you must have some transaction like the Extractor Checker RSA3. If so
then execute ST05, switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Thanks,
JituK

Colors are different between Lightroom and Photoshop Elements

I have a new monitor and I have the SyderPro4 calbration software. My monitor is the Dell UltraSharp U2713HM. When calibrated with the Syder my colors are different when I go into different programs. The same photo looks different in Lightroom than it does in Photoshop Elements. When I export the picture from Lightroom to Elements the picture becomes very orange. I have already talked to Dell and to Datacolor about my issue and they both are telling me this shouldn't be happening. When I uninstall my calibration software my problem goes away, and the colors of the images stay consistant between the two programs. Does anybody have any advice to what maybe wrong?

I am having this problem too.
my site www.redsmartie.com looks fine on everyone elses computer but on mine the red background #660000 is not displaying right on the jpg images
see here http://homepage.mac.com/redsmartie/colourerror.png
I have rgb colour profiles managed by a Pantone Huey device and haven't previously noted a problem. This was added recently so I recreated the images which corrected things on my screen but made the red around the images too dark for everyone else.
The images were created in Photoshop so I changed the photoshop profile back to CinemaDisplay that it previously was on and now everyone else is ok but my screen shows the red around the images much to light.
I really need some help with this as its a disaster waiting to happen on work I do for other people, especially if I'm producing work that looks right on my setup but is wrong for everyone else!
Dual 2GHz PowerMac G5 (plus 15" G4 PowerBook) Mac OS X (10.4.6) 2.5 GB DDR SDRAM, 2x160GB SATA, 23" Cinema HD Display

Structure and Table

Dear Friends,
Can somebody explain the difference between Table and Structure. In release procedure customisation, we define CEKKO structure (instead of table name) and field as BSART, WHY?
Thanks in advance.
Khalid

Hello,
The structure is a flat "structure", so it can't be used to stored the data, but only to manage the variable, so to define a work area for a program, for the dynpro or to define the parameters of the interface of the functions or the methods.
U can include a structure in a table: so this table'll have the same "structure" of the structure (or a part of the "structure" of the table is like the structure).
So the structure ia an easy way to organize severals data belonging to the same business.
Regards
Sapman man

Create structure and table similar to a dynamic table.

Hi,
i need to create a structure similar to that of a dynamic table. your help will be appreciated.
Thanks,
KK.

REPORT z_dynamic.
TYPE-POOLS : abap.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
               <dyn_wa>,
               <dyn_field>.
DATA: dy_table TYPE REF TO data,
      dy_line TYPE REF TO data,
      xfc TYPE lvc_s_fcat,
      ifc TYPE lvc_t_fcat.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_table(30) TYPE c DEFAULT 'T001'.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
PERFORM get_structure.
PERFORM create_dynamic_itab.
PERFORM get_data.
PERFORM write_out.
*&      Form get_structure
*       text
FORM get_structure.
DATA : idetails TYPE abap_compdescr_tab,
         xdetails TYPE abap_compdescr.
DATA : ref_table_des TYPE REF TO cl_abap_structdescr.
* Get the structure of the table.
ref_table_des ?=
      cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
LOOP AT idetails INTO xdetails.
    CLEAR xfc.
    xfc-fieldname = xdetails-name .
    xfc-datatype = xdetails-type_kind.
    xfc-inttype = xdetails-type_kind.
    xfc-intlen = xdetails-length.
    xfc-decimals = xdetails-decimals.
    APPEND xfc TO ifc.
ENDLOOP.
ENDFORM.                    "get_structure
*&      Form create_dynamic_itab
*       text
FORM create_dynamic_itab.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = ifc
    IMPORTING
      ep_table        = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
ENDFORM.                    "create_dynamic_itab
*&      Form get_data
*       text
FORM get_data.
* Select Data from table.
SELECT * INTO TABLE <dyn_table>
             FROM (p_table).
ENDFORM.                    "get_data
*&      Form write_out
*       text
FORM write_out.
* Write out data from table.
LOOP AT <dyn_table> INTO <dyn_wa>.
    DO.
      ASSIGN COMPONENT sy-index
         OF STRUCTURE <dyn_wa> TO <dyn_field>.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      IF sy-index = 1.
        WRITE:/ <dyn_field>.
      ELSE.
        WRITE: <dyn_field>.
      ENDIF.
    ENDDO.
ENDLOOP.
ENDFORM.                    "write_out

Viewing/extracting SAP structure and Table DDL

Hope someone can help me ....I
I want to create tables with column names as exactly as those in SAP, for an ETL process.
I was able to get the DDL for VBAP, though I had to edit quite a few things.
But couldn't get those of Structures (tried KUAGV).
Can someone paste details of how to get DDLs of Tables and Structures in SAP ECC6..
right now starring at the 'ABAP Dictionary: Initial Screen'
Thanks in advance...

Hi,
See the given link, It may help you.
Append existing structure in the table
Regards,
Shamma

Waht are differances etweent structures and tables

Similar Messages

Maybe you are looking for