Waht is compare target option in 10g Database Control
hi,
my company use 10g database control (enterprise manager) in host perormance page comare target option i can't understand what is compare target option.
Allows you to compare the configuration of two targets to each other... How many times have you been asked if two hosts/databases/etc are configured exactly the same because they perform differently.
If I had a 5 cents for everytime I heard that........ (not that they are always the same.....)
Similar Messages
-
Unable to open 10g Database Control Webpage from another computer
Unable to open 10g Database Control Webpage from another computer
Hi Gurus
I have just installed Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on my PC Windows XP , created database and configured DB control
I can open Database Control Webpage on the database machine by typing
http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
or
http://136.18.70.189:1158/em
But can not open it from another PC
When I do following from another PC
1. http://USI2374993VND0.vlgdw2k.visteon.com:1158/em
Get error: [code=DNS_NO_DATA] The IP address was not found during the DNS lookup. Contact your system administrator.
2. http://136.18.70.189:1158/em
Get error:Can not display web page
I can ping 136.18.70.189 but not USI2374993VND0.vlgdw2k.visteon.com
On the other PC I also tried adding 136.18.70.189 to
tools - internet options - security - local internet - sites - advanced - add this web
site to the zone as http://136.18.70.189
But it did not work
Please help with any ideas
Thanks a bunch
New DBAFirewalls?
DNS translation issues? -
Oracle 10g Database control installation error
Hi,
Installing oracle 10g database control had give me an error.But Repository created successfully . please find the log file below
Is there i need to install ...? before i start to run emca to install Database Control.
my points of interest are here
FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
i didn't find jms.xml,rmi.xml,http-web-site.xml etc in this location /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/
File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not exist
Let me know how to slove this error.
Thanks,
anil
Error
=========
emca -config dbcontrol db -repos create
STARTED EMCA at Apr 8, 2008 4:33:25 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXX
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /opt/db/oracle/product/10.2.0
Database hostname ................ xxx.xxxx.local
Listener port number ................ 1521
Database SID ................ XXX
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 8, 2008 4:34:55 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Could not complete the configuration. Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
the following is log generated (emca_2008-04-08_04-33-25-PM.log)
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [opt/db/oracle/product/10.2.0]
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /opt/db/oracle/product/10.2.0
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml in searching for tag jms-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1172)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml in searching for tag rmi-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1176)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml in searching for tag web-site
with attribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1180)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/install/staticports.ini
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /opt/db/oracle/product/10.2.0:mcidm11.pacs11.local:null:SDM:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_SDM value: 3938
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_SDM value: 1158
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_SDM value: 5540
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_SDM value: 5520
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: SDM : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-08_04-34-58-PM.log
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:503)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:208)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.unlockAccounts(EMReposConfig.java:566)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:235)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:239)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)Hi all,
i started creating database control repository, when i saw emca running i had seen repository created successfully , but sysman user is not created at this point of time. Then i looked into emca_repos_create_2008-04-10_11-57-03-AM.log file but the file is unable to open because it's looking for file emreposcre.sql which creates sysman user in this location /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
i feel while installing the database these files are not created....? or i need to run any scripts before running emca ....?
give me some inputs to this thread.
Thanks,
nil
STARTED EMCA at Apr 10, 2008 11:55:41 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXXXX
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 10, 2008 11:57:02 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollog
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 10, 2008 11:57:03 AM
mcidm11 10.2.0/bin>
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-10_11-57-03-AM.log
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
mcidm11 emca/SDM> pwd
/opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM
mcidm11 emca/SDM> more emca_repos_create_2008-04-10_11-57-03-AM.log
SP2-0310: unable to open file "/opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/emreposcre.sql"mcidm11 emca/SDM> cd
Directory: /opt/db
mcidm11 /opt/db> cd /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
Directory: /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql
mcidm11 emdrep/sql> ls
core db ias ocs -
EM 10g Database Control - Status: Agent Unreachable
Hi,
OS: AIX 5L
Database: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit
We have installed 2 instances with EM 10g database control option.
At the end EM was running over the second database.
Then we switch it to look over the first one by reconfiguring these files:
$ORACLE_HOME/sysman/config/emd.properties;
$ORACLE_HOME/sysman/config/pref/dbastudio-oradba.crd.
Now EM seems to work fine except for this error: Agent Unreachable.
oradba@aix09(:SIGP)/u01/apps/oradba/product/10.1.0/aix09_SIGP/sysman/log > emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.2.0
OMS Version : 10.1.0.2.0
Protocol Version : 10.1.0.2.0
Agent Home : /u01/apps/oradba/product/10.1.0/aix09_SIGP
Agent binaries : /u01/apps/oradba/product/10.1.0
Agent Process ID : 4284428
Parent Process ID : 3399760
Agent URL : http://aix09:1830/emd/main
Started at : 2004-08-09 12:24:29
Started by user : oradba
Last Reload : 2004-08-09 12:24:29
Last successful upload : (none)
Last attempted upload : 2004-08-09 14:29:51
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 1955
Size of XML files pending upload(MB) : 50.12
Available disk space on upload filesystem : 4.60%
Agent is Running and Ready
/aix09_SIGP/sysman/log/ emagent.trc:
2004-08-09 14:31:53 Thread-1910 ERROR upload: Failed to upload file A0000001.xml, ret = -2
2004-08-09 14:31:53 Thread-1910 WARN upload: FxferSend: received http error in header from repository: http:/
/aix09:5500/em/upload/
ERROR-400|ORA-04020: deadlock detected while trying to lock object 30x700000021709BF80x700000021B01D200x700000
0267473A8
2004-08-09 14:31:53 Thread-1910 ERROR upload: Failed to upload file A0000001.xml, ret = -2
2004-08-09 14:31:53 Thread-1910 ERROR upload: 3 Failures in a row for A0000001.xml, we give up
2004-08-09 14:31:53 Thread-1910 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
After connecting as sysman Ive ran these statements:
SQL> SELECT emd_url
2 FROM mgmt_targets t
3 WHERE t.target_name = 'aix09'
4 AND t.target_type = 'host';
EMD_URL
http://aix09:1830/emd/main
SQL> SELECT t.target_name, t.target_type,
2 TO_CHAR(t.load_timestamp,'DD-MON-YYYY HH24:MI:SS') "discovery_time
3 TO_CHAR(t.last_updated_time,'DD-MON-YYYY HH24:MI:SS') "last_metada
ta_load",
4 TO_CHAR(a.marker_timestamp,'DD-MON-YYYY HH24:MI:SS') "last_severit
y_load",
5 TO_CHAR(t.last_load_time,'DD-MON-YYYY HH24:MI:SS') "last_metric_lo
ad"
6 FROM mgmt_targets t, mgmt_availability_marker a
7 WHERE t.target_guid = a.target_guid
8 AND t.target_name = 'aix09'
9 AND t.target_type = 'host';
TARGET_NAME
TARGET_TYPE discovery_time
last_metadata_load last_severity_load last_metric_load
aix09
host 03-AUG-2004 14:47:55
05-AUG-2004 18:28:45 05-AUG-2004 18:30:42 05-AUG-2004 17:13:55
Does any one know what do I have to do to solve this problem ?
Thanks in advance,
VitorCan you start a browser on the client machine?
(netscape/mozilla) and try to load
http://aix09:1830/emd/main
Make sure both the client and the OMS server can resolve aix09 hostname
Make sure the client can resolve the OMS server name. -
Oracle 10G Database Control and Scheduling OWB Process Flow
Does anyone know how to go about scheduling an OWB Process Flow from
Oracle 10G Data Base Control. I knew how to do this with Oracle Enterprise Manager 9.2 but we recently upgraded to Oracle Db 10G and the interface has changed significantly.
Now the interface seems to require a PL/SQL stored procedure to be executed.
Is there a template procedure that is installed with 10G Data Base Control as there was for 9.2 i.e. oem_exec_template.sql?
Thanks! Deadline approaching fast...
MarionI've used the oem_exec_template.sql successfully with OWB 10.1 and Oracle 10G Database Control, with a little trial and error at first.
I'm assuming that your job execution environment is set up correctly, ie. that you can properly execute jobs via the host agent.
1. Log on to Database Control as SYSTEM, select Jobs from the links at the bottom of the page
2. In the Results section, Create Job, select "SQL Script" and press Go
3. In the General section, enter Job Name, and as SQL Script enter e.g.:
@/u01/app/oracle/owb_oracle_home/owb/rtp/sql/oem_exec_template.sql owb_runtime WF_LOC PROCESS MY_PROCESS , ,
4. In the Databases section, add your target database
5. In the Credentials section, I select "Override Preferred Credentials" and use the agent account (oracle on my Linux system) and db user owb_access (OWB Runtime Access user)
6. Review Schedule tab and submit
Comments on step 3:
- the oem_exec_template.sql script must be installed according to the path specified in step 3, on the database host where the OWB Runtime Repository is located
- owb_runtime is the owner of my OWB Runtime Repository
- WF_LOC is the name of my Workflow Location as seen in OWB Deployment Manager
- MY_PROCESS is the name of a deployed Workflow Process
- the commas indicate that I don't supply any system or custom parameters.
- step 3 is actually a shell command line that is interpreted by eg. /bin/sh on Unix or cmd on Windows, and must obey proper quoting rules. On windows, I had to specify the empty commas as "\," (including dblquotes)
Regards, Hans Henrik -
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0 is one hour behiend on AIX 5.3.
I have installed the new timezone version 4 already by oracle DST path database is good OEM main page is showing one hour behiend.
I have done every possible effort last thing may be i have to update java home i have 1.4 IBM java on the server.
Please help me in this. Thanks.See the Metalink Note *Impact Document for Daylight Saving Time Shift for Enterprise Manager Grid Control [ID 417939.1]* Appendix B - FAQ - point 18
What is the impact of not patching the JDK on the OMS for 10g Grid Control?
If you do not patch the JDK on the OMS page refreshed times and possibly other times displayed in the console will be incorrect (they will be off by 1 hour) during an affected period.
Oracle strongly recommends that you do patch the OMS JDK but we are not aware of any data corruption in the repository nor of any impact on critical EM functionalities (such as severities, notifications and jobs) when the JDK is not patched. -
hi,
Working on oracle 10g is just like a mirage for me. I have installed and uninstalled it many times on my new laptop, but not been able to work on it, because of many oracle problems. my OS is windows xp prof. sp2. i have cracked my brain on accessing to oracle 10g database control webpage, but have not succeeded yet. everytime i am successful in installing oracle 10g on my machine but everytime i fail to connect to em-database control and got the error 'page can not be displayed'.
my laptop uses dhcp and it uses a wireless LAN. i install and configure loopback adapter before installing 10g. i have tried with 192.168.x.y as the ip address of the loop back adapter and have put many numbers in place of x, y where 0<x<254 and 0<y<254 . Infact i have tried with 192.168.15.16
192.168.18.12
192.168.78.12
192.168.84.123
192.168.67.102
192.168.20.178
and many more and in all the previous cases i configured subnet mask to be
255.255.255.0. Everytime database installation is successful but not able to connect to oem db control webpage.
One more error i get everytime is that whenever i try to connect to database through sql window , sometimes i connect and sometimes i dont.i get the error ORA-12357 TNS Connection Closed.
i provide username: scott
password : tiger .
host string: orcl
( orcl is the database name and also the name of the sid).
But i always am able to connect to the database through command line c:\ prompt and everything works fine.
Please provide me some solutions for the above problems...See Response to your other post
its very very urgent, please reply -
hi,
Working on oracle 10g is just like a mirage for me. I have installed and uninstalled it many times on my new laptop, but not been able to work on it, because of many oracle problems. my OS is windows xp prof. sp2. i have cracked my brain on accessing to oracle 10g database control webpage, but have not succeeded yet. everytime i am successful in installing oracle 10g on my machine but everytime i fail to connect to em-database control and got the error 'page can not be displayed'.
my laptop uses dhcp and it uses a wireless LAN. i install and configure loopback adapter before installing 10g. i have tried with 192.168.x.y as the ip address of the loop back adapter and have put many numbers in place of x, y where 0<x><254 and 0<y><254 . Infact i have tried with 192.168.15.16
192.168.18.12
192.168.78.12
192.168.84.123
192.168.67.102
192.168.20.178
and many more and in all the previous cases i configured subnet mask to be
255.255.255.0. Everytime database installation is successful but not able to connect to oem db control webpage.
One more error i get everytime is that whenever i try to connect to database through sql window , sometimes i connect and sometimes i dont.i get the error ORA-12357 TNS Connection Closed.
i provide username: scott
password : tiger .
host string: orcl
( orcl is the database name and also the name of the sid).
But i always am able to connect to the database through command line c:\ prompt and everything works fine.
Please provide me some solutions for the above problems...See Response to your other post
its very very urgent, please reply -
An instance of Oracle EM 10g Database Control is already running.
Hello all, I've this problem when I reboot my system and try to start EM console (because it's not working after each reboot until I restarted it):
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://IC-Server:1158/em/console/aboutApplication
- An instance of Oracle Enterprise Manager 10g Database Control is already running.
but if I check the EM status, these are the results:
IC605 on IC-Server: emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://IC-Server:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
Logs are generated in directory /u01/app/oracle/product/10.2.0/IC-Server_IC605/sysman/log
IC605 on IC-Server:The only way to solve this that I found -at least for now- it's to stop the EM console, and then start it again.
And contents of file emdctl.trc are these:
IC605 on IC-Server: cat emdctl.trc
2008-09-02 00:11:00 Thread-1 WARN http: snmehl_connect: connect failed to (IC-Server:3938): Connection refused (error = 146)
.... a lot of similar lines ....
2008-09-12 00:47:17 Thread-1 WARN http: snmehl_connect: connect failed to (IC-Server:1158): Connection refused (error = 146)
2008-09-12 01:11:35 Thread-1 WARN http: snmehl_connect: connect failed to (IC-Server:1158): Connection refused (error = 146)
IC605 on IC-Server:
Could you give any clue about where I must search for the problem?
Thanks a lot.
Martin
P.S.: Some additional info...
OS Version:
# uname -a
SunOS IC-Server 5.10 Generic_137112-06 i86pc i386 i86pc
DB Version:
SQL> conn /as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 289406976 bytes
Fixed Size 1279820 bytes Variable Size 159385780 bytes
Database Buffers 125829120 bytes
Redo Buffers 2912256 bytes
Database mounted.
Database opened.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for Solaris: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - ProductionEdited by: martinmorono on Sep 14, 2008 3:41 PMI've done it. Thanks.
>SQL> alter session set current_schema = SYSMAN;
>
>Session altered.
>
>SQL> exec mgmt_target.set_agent_tzrgn('IC-Server:3938','America/Buenos_Aires');
>
>PL/SQL procedure successfully completed.
>
>SQL>
But I still have the same trouble with EM Console startup... After rebooting my server, I got this error:
IC605 on IC-Server: emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://IC-Server:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
Logs are generated in directory /u01/app/oracle/product/10.2.0/IC-Server_IC605/sysman/log
IC605 on IC-Server: emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://IC-Server:1158/em/console/aboutApplication
- An instance of Oracle Enterprise Manager 10g Database Control is already running.
IC605 on IC-Server:I must to stop and then to start it "again" to be able to use the EM.
Have you any idea? -
Add second instance to Enterprise Manager 10g database control
Hi,
I have a server with one Oracle 10g database instance, and I
configured the local Enterprise Manager database control for it.
Now I added a second instance on the server, using the same Oracle
home. Can I manage this new instance using the existing database
control or do I have to configure a second database control using
another port? The documentation isn't too clear on this.
Thanks,
MatthiasYou can't manage the two database using database control. you have to go for Grid control only if you need to configure two or more instance.
-
How to open the 10g Database Control Webpage from another computer ?
it is a freshly installed Oracle 10gR2 EE on windows xp professional.. all settings are default by installer.
i can open the Database Control Webpage on the database machine by typing http://localhost:1158/em in IE.
however when i try to open it from another pc on the same LAN by using http://database_pc_ip_address:1158/em in IE, it says the page can not be found.
what else need to be done before i can open the Database Control Webpage from another PC?
thanks for the help !You have a configuration problem on your database machine, LOCALHOST is resolved to the internal loopback address 127.0.0.1, not to the actual IP-Address of the machine. Such a configuration works only locally, for remote access you have to specify a hostname known to the network. Check the installation guide for the correct setup (machines connected to a network or not, DHCP or not):
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABBDGBI
Werner -
Unable to start Oracle Enterprise Manager 10g Database Control
We have 2 systems.. one with the database and one with the midtier (both Linux). Our site is currently down and after rebooting it, and trying to start the database console ($ORACLE_HOME/bin/emctl start dbconsole), the db console fails to load. I looked at the sysman log files and got the following
From emoms.trc
2011-10-29 01:00:02,536 [JobWorker 6217:Thread-13] ERROR em.jobs executeCommand.159 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup to set required parameters.
From emagent.trc
2011-10-29 10:52:53 Thread-3030621104 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 2 (No such file or directory)
From emagentfetchlet.log
2011-10-29 10:52:52,827 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
From emdctl.trc
2011-11-01 23:21:43 Thread-3065480896 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =-240,and testTZoffset for US/Eastern:-300 do not match
Any help would be greatly appreciated.
Thanks,
Ceciliayes, that link is pretty much right, Ive run those manual commands many times and MOST of them works fine see below. the recommended way of doing this putst the database into quiesce mode which pretty much kills your DB. As far as I can remember, I did the manual way a couple years ago and had awful trouble with one of the steps (cant remember which) and ended up bringing DB down anyway so I would suggest doing the work in a maintenance window just in case. double check all the steps anyway as it looks like something changed in your environment to cause your initial errors, whatever scenario caused that (permissions or whatever) may still exist.
14:32:48 SQL> DROP USER sysman CASCADE;
DROP PUBLIC SYNONYM setemviewusercontext;
DROP ROLE mgmt_user;
DROP PUBLIC SYNONYM mgmt_target_blackouts;
DROP USER mgmt_view;
DROP USER dbsnmp CASCADE;
-- remove the os folder contents
rm $ORACLE_HOME/host_sid/
rm $ORACLE_HOME/oc4j/j2ee/OC4J_DBConsole_host_sid
-- then easiest way to install the repository is to run
emca -config dbcontrol db -repos create -
10g Database Control, View Tablespaces
Kindly refresh my memory - what does a NEGITIVE value in the USED column mean? (And how to "corret" it)
You should check the following:
Navigate to the datafile underneath the tablespace.
Check if for the datafile the 'Automatically extend datafile when full (AUTOEXTEND)' is checked.
If so, make sure the value for the current file size does not exceed the value for 'Maximum File Size'. If this is the case, this is the cause of the negative value in the tablespace alert. Simply change the value for 'Maximum File Size' and the alert will clear automatically.
Rob -
Can 10g release 2 standalone database control behaves as 9i oem
Hi all,
My question is ,in 9i we have oem,we can add multiple databases in 9i oem.At the same time we can login to multiple databases and see different sessions,OS user,memory information, storage information of different databases.Can we perform the same task with 10g EM database control without having the 10g EM grid control.I know by 10g grid control we have a centralized management.But I don't want to install 10g grid control ,I want to make use of 10g database control and monitor my different databases.I wprked in an distributed environment.
Best Regards,
Asma Akhter.Hi,
BY installing intelligent agent on separate servers and oracle management server ,it means I have to install EM grid control.I don't want to install Em grid control.I need to monitor different databases as we do in 9i OEM .Is there any option to use 10g database control to perform the same task.
Regards,
Asma -
I can enter in EM Database Control with the following directions:
http://192.168.0.5:1158/em http://localhost:1158/em http://127.0.0.1:1158/em
But not with the http://nshcare_server:1158/em direction where to nshcare_server it is the name of host (machine_name).
When introducing the user and the password, return to appear the screen again of login without showing no error. If, for example, an incorrect password is introduced, appears a message of error.
Why does not work putting the name of host?
Thanks.Hi,
The output of the emctl status dbconsole:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://NSHCARE_SERVER:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory C:\oracle\product\10.2.0\db_1/NSHCARE_SERVER_NS/sysman/log
The content of the targets.xml:
<Targets AGENT_SEED="126608752">
<Target TYPE="oracle_emd" NAME="NSHCARE_SERVER:3938"/>
<Target TYPE="host" NAME="NSHCARE_SERVER"/>
<Target TYPE="oracle_database" NAME="NS">
<Property NAME="MachineName" VALUE="NSHCARE_SERVER"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="NS"/>
<Property NAME="OracleHome" VALUE="C:\oracle\product\10.2.0\db_1"/>
<Property NAME="UserName" VALUE="0fcf1c23c3b50242" ENCRYPTED="TRUE"/>
<Property NAME="password" VALUE="0641b14c11a36641e79dfa23e63ecfce" ENCRYPTED="TRUE"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_NSHCARE_SERVER">
<Property NAME="Machine" VALUE="NSHCARE_SERVER"/>
<Property NAME="LsnrName" VALUE="LISTENER"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="OracleHome" VALUE="C:\oracle\product\10.2.0\db_1"/>
<Property NAME="ListenerOraDir" VALUE="C:\oracle\product\10.2.0\db_1\network\admin"/>
</Target>
</Targets>
The content of the emoms.properties:
#Tue Dec 12 10:21:13 CET 2006
oracle.sysman.emSDK.svlt.ConsoleServerName=NSHCARE_SERVER_Management_Service
oracle.sysman.eml.mntr.emdRepPwd=2ff38e29ffcd1004f59701afe0985257
emdrep.ping.pingCommand=ping <hostname>
oracle.sysman.eml.mntr.emdRepPort=1521
oracle.sysman.eml.mntr.emdRepDBName=NS
oracle.sysman.eml.mntr.emdRepPwdSeed=5520390720547338740
oracle.sysman.emSDK.svlt.ConsoleMode=standalone
oracle.sysman.emRep.dbConn.statementCacheSize=30
oracle.sysman.db.isqlplusUrl=http\://NSHCARE_SERVER\:5560/isqlplus/dynamic
oracle.sysman.emSDK.svlt.ConsoleServerPort=1158
oracle.sysman.eml.mntr.emdRepRAC=FALSE
oracle.sysman.emSDK.emd.rt.useMonitoringCred=true
oracle.sysman.eml.mntr.emdRepPwdEncrypted=TRUE
oracle.sysman.db.isqlplusWebDBAUrl=http\://NSHCARE_SERVER\:5560/isqlplus/dba/dynamic
oracle.sysman.emSDK.svlt.ConsoleServerHost=NSHCARE_SERVER
oracle.sysman.eml.mntr.emdRepDBID=2760945814
oracle.sysman.emSDK.svlt.ConsoleServerHTTPSPort=1158
oracle.sysman.eml.mntr.emdRepServer=NSHCARE_SERVER
oracle.sysman.eml.mntr.emdRepSID=NS
oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=NSHCARE_SERVER)(PORT\=1521)))(CONNECT_DATA\=(SERVICE_NAME\=NS)))
oracle.sysman.emSDK.sec.ReuseLogonPassword=true
oracle.sysman.eml.mntr.emdRepUser=SYSMAN
oracle.sysman.db.adm.conn.statementCacheSize=2
oracle.sysman.db.perf.conn.statementCacheSize=30
And the content (very big) of the emd.properties:
# perl executable directory
perlBin=C:\oracle\product\10.2.0\db_1\perl\5.8.3\bin\MSWin32-X64-multi-thread
# script directory
scriptsDir=C:\oracle\product\10.2.0\db_1/sysman/admin/scripts
# emd Root directory(read-only location). Metrics should not create files
# under this directory
emdRoot=C:\oracle\product\10.2.0\db_1
# agent Root directory(writeable).
# Use this property to base any temporary file creation.
agentStateDir=C:/oracle/product/10.2.0/db_1/NSHCARE_SERVER_NS
# Chronos root directory
chronosRoot=C:/oracle/product/10.2.0/db_1/NSHCARE_SERVER_NS/sysman/emd/chronos
# OMS Upload URL
# if there is no receiving OMS or if you wish to disable the UploadManager
# please set this value to empty or comment out below line
REPOSITORY_URL=http://NSHCARE_SERVER:1158/em/upload/
# Proxy settings used for fetchlets. not applicable for uploader.
#proxyHost=www-proxy.us.oracle.com
#proxyPort=80
#dontProxyFor=.us.oracle.com
# If it is necessary to go through an http proxy server to get to the
# repository, uncomment the following two lines
#REPOSITORY_PROXYHOST=
#REPOSITORY_PROXYPORT=
#REPOSITORY_PROXYREALM=%EM_REPOS_PROXYREALM%
#REPOSITORY_PROXYUSER=%EM_REPOS_PROXYUSER%
#REPOSITORY_PROXYPWD=%EM_REPOS_PROXYPWD%
# This string is used by the agent to connect to remote targets
# ***IMPORTANT*** Do not change the contents of this setting. Only the
# install should modify this value.
agentSeed=126608752
# This string is used by the agent to determine which algorithm to use for encrypted data
# The string value will be same as the release version
agentVersion=10.1.0.4.0
# How long, in minutes, collector will wait until next load.
UploadInterval=5
# If an upload fails, we want to backoff by UploadFailBackoff
# percentage more each time for each successive upload failure
# e.g. if we start the retry at 1 minute. If we fail in our next
# upload attempt, we try again 1minute 12 seconds later etc.
UploadFailBackoffPct= 20
# Maximum amount of time, in seconds, upload will wait for response from
# repository before timing out.
# 0 means infinite.
UploadTimeout=1800
# Timeout for upload a file, HealthMonitor will abort the EMD process if
# UploadManager does not finish uploading one file within this time
# Unit is minite, the default value is 1 hour ( 15 Min)
#UploadMaxTime=15
# How big the file the collector will upload (in KB)
# the actual file size could be slightly bigger.
# This is only a guidance.
UploadFileSize=2048
# The maximum number of megabytes(MB) the upload manager will support in the
# upload directory before temporarily being disabled
UploadMaxBytesXML=50
# The maximum number of files the upload manager will support in the
# upload directory before temporarily being disabled
UploadMaxNumberXML=5000
# The maximum amount (%) of disk space that can be used on the EMD filesystem
# before the following is disabled:
# - Collection of data (upload manager)
# - Logging and tracing
UploadMaxDiskUsedPct=98
# The amount (%) of disk space that can be used on the EMD filesystem
# before the following is re-enabled after being disabled previously:
# - Collection of data (upload manager)
# - Logging and tracing
UploadMaxDiskUsedPctFloor=95
# Time out for the Agent to think that the access to the database could be
# hung. The Agent would not allow more threads to go and hang with a database
# if any one access to the database does not return within DbHangTimeout
# seconds.
# The more the timeout more the possibility of allowing more threads
# to be hung in the EMD with a bad database.it is specified in seconds.
#DbHangTimeout=200
# The script to run if disk space usage exceeds parameters or if certain other
# error conditions occur.
#emdFailureScript=emdfail.command
# The location of the file that contains the root certificate.
emdRootCertLoc=C:/oracle/product/10.2.0/db_1/NSHCARE_SERVER_NS/sysman/config/b64LocalCertificate.txt
internetCertLoc=C:/oracle/product/10.2.0/db_1/NSHCARE_SERVER_NS/sysman/config/b64InternetCertificate.txt
# The download URL for the EMD Oracle Wallet and its local file location.
# Note: Ensure that this URL references a valid port number at which the
# console is available on http
emdWalletSrcUrl=http://NSHCARE_SERVER:1158/em/wallets/emd
emdWalletDest=C:/oracle/product/10.2.0/db_1/NSHCARE_SERVER_NS/sysman/config/server
# The email address for out-of-band notifications
emd_email_address=
emd_email_gateway=
# The return email address for out-of-band notifications
emd_from_email_address=
# EMD main servlet URL
EMD_URL=http://NSHCARE_SERVER:3938/emd/main
# Whether the EMD should listen on all NICs on the current host (the default)
# or just the NIC associated with the hostname in EMD_URL
AgentListenOnAllNICs=TRUE
# This parameter indicates the thread model to use. uncomment one of the
# following ThreadPoolModel line to indicate the model, agent need to use.
# SMALL if number of targets is less than 11.
# MEDIUM if number of targets is from 11 to 50.
# LARGE if number of targets is greater than 50.
# This parameter can be overriden by 'MaxThreads' which indicates the maximum
# number of threads that CEMD can have running at any point of time. User can
# mostly use the other parameter ThreadPoolModel to indicate what model for the
# agent to use.
# ThreadPoolModel = SMALL
# ThreadPoolModel = MEDIUM
# ThreadPoolModel = LARGE
# This parameter indicates the stack size, threads have to be created with.
# we can set it to 0 to use the OS default value.
# In some version of solaris(such as 2.9 ) specify a stack size may cause Java Hotspot warning
# when JVM is used.
NormalThreadStackSize=0
#Signals that users want to ignore.
#It can be one or combination of SIGTERM, SIGINT
# The signals can listed with ',' as delimiter.
#IgnoreSignals=
# This property is NO LONGER USED for host config collection (instead, hostConfigClasspath is used).
# If noone else uses it, it can be removed.
ouiLoc=C:\oracle\product\10.2.0\db_1/oui
# Classpath for host config collection
# VERY IMPORTANT NOTE: If you change the host config classpath entries in this section, you HAVE
# to change the HOST_CONFIG_TEST_CLASSPATH entry in the utl/emdwqaenv file too.
# NOTE: if the location of emd_java.jar and/or log4j-core.jar is changed
# make sure that appropriate changes are also made
# to the CLASSPATH variable in this file if necessary
# PORTING NOTE: Check OUI-required jar files for OUI APIs to work. They could be different on your platform.
# Also, our version of xmlparserv2.jar must be compatible with the one OUI expects (both OUI and ECM use XML parser).
hostConfigClasspath=C:\oracle\product\10.2.0\db_1/oui/jlib/xmlparserv2.jar;C:\oracle\product\10.2.0\db_1/oui/jlib/OraInstaller.jar;C:\oracle\product\10.2.0\db_1/oui/jlib/srvm.jar;C:\oracle\product\10.2.0\db_1/oui/jlib/share.jar;C:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;C:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar
# JAVA HOME required for JavaExt metric calls
JAVA_HOME=C:\oracle\product\10.2.0\db_1/jdk/jre
# CLASSPATH required for JavaExt metric calls
CLASSPATH=C:\oracle\product\10.2.0\db_1/sysman/jlib/emd_java.jar;C:\oracle\product\10.2.0\db_1/opmn/lib/ons.jar;C:\oracle\product\10.2.0\db_1/lib/xmlparserv2.jar;C:\oracle\product\10.2.0\db_1/sysman/jlib/log4j-core.jar;C:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/lib/http_client.jar;C:\oracle\product\10.2.0\db_1/lib/dms.jar;C:\oracle\product\10.2.0\db_1/lib/dmsEmd.jar;C:\oracle\product\10.2.0\db_1/jlib/share.jar;C:\oracle\product\10.2.0\db_1/jdbc/lib/ojdbc14dms.jar;C:\oracle\product\10.2.0\db_1/jlib/jssl-1_1.jar;C:\oracle\product\10.2.0\db_1/jlib/javax-ssl-1_1.jar;C:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;C:\oracle\product\10.2.0\db_1/lib/em_test.jar;C:\oracle\product\10.2.0\db_1/jlib/ojmisc.jar;C:\oracle\product\10.2.0\db_1/jlib/repository.jar;C:\oracle\product\10.2.0\db_1/opmn/lib/optic.jar
# this is the java option
#JAVA_OPTIONS=-Xmx128m
# These are the optional Java flags for the in-process Java
# Native Interface (JNI)
agentJavaDefines=-Doracle.dms.refresh.wait.time=1000 -DUrlTiming.UseJSSE=true
# When set to true, the emd.log and emd.trc file will be appended by a pid
# For example:
# emd_15789.log
# emd_15789.trc
# By default, it is not set for regression test purpose.
# After installed, please uncomment this line because when EMD is restarted,
# previous log information will be lost if not set to true.
#LogFileWithPID=true
# Default log file maximum size before rolling in Kilobytes
LogFileMaxSize=4096
# Maximum number of log file roll files to maintain before deletion
LogFileMaxRolls=4
# Default trace file maximum size before rolling in Kilobytes
TrcFileMaxSize=4096
# Maximum number of trace file roll files to maintain before deletion
TrcFileMaxRolls=4
# To enable the metric browser, uncomment the following line
# This is a reloadable parameter
#enableMetricBrowser=true
# To disable Remote operations (non-reachable agent) uncomment the following
# line:
#disableRemoteOperations=true
# add an additional admin path from which the agent will read additional
# target metadata. The specified path should have the mandatory 4 directories
# under it. 1. metadata 2. scripts 3. default_collection 4. discover
#altAdminPath=<additional admin path>
# The health monitor executes callbacks in a separate thread. if for some
# reason the threads spawned from health monitor to execute callbacks are
# hung, the agent could run out of resource and freeze.
# so when the current thread count spawned from the Health monitor reaches
# this limit, the agent is bounced. the default is set to 5.
#MaxHealthMonitorThreads=5
# dynamicPropsComputeTimeout default to 30s
dynamicPropsComputeTimeout=60
# emagent perl tracing levels
# supported levels: DEBUG, INFO, WARN, ERROR
# default level is ERROR
EMAGENT_PERL_TRACE_LEVEL=ERROR
# other optional parameters for perl tracing
# EMAGENT_PERL_TRACE_DIR default to $ORACLE_HOME/sysman/log
#EMAGENT_PERL_TRACE_DIR=
# EMAGENT_PERL_TRACE_FILESIZE default to 5M
#EMAGENT_PERL_TRACE_FILESIZE=5
# this section define the logging level for each component,
# it is "reloadable", you can change the level at runtime to reset
# the logging level, but if you remove the line, it will not be
# changed.
tracelevel.main=WARN
tracelevel.emSDK.xml=WARN
tracelevel.emSDK.utl=WARN
tracelevel.ResMonitor=WARN
tracelevel.Dispatcher=WARN
tracelevel.ThreadPool=WARN
tracelevel.pingManager=WARN
tracelevel.collector=WARN
tracelevel.http=WARN
tracelevel.ssl=WARN
tracelevel.ssl.io=WARN
tracelevel.blackouts=WARN
tracelevel.upload=WARN
tracelevel.command=WARN
tracelevel.reload=WARN
tracelevel.scheduler=WARN
tracelevel.Authentication=WARN
tracelevel.metadata=WARN
tracelevel.targets=WARN
tracelevel.TargetManager=WARN
tracelevel.engine=WARN
tracelevel.javaproc=WARN
tracelevel.vpxoci=WARN
tracelevel.javavm=WARN
tracelevel.fetchlets=WARN
tracelevel.fetchlets.os=WARN
tracelevel.fetchlets.osline=WARN
tracelevel.fetchlets.oslinetok=WARN
tracelevel.fetchlets.UDM=WARN
tracelevel.fetchlets.sql=WARN
tracelevel.fetchlets.url=WARN
tracelevel.fetchlets.urllines=WARN
tracelevel.fetchlets.urllinetoken=WARN
tracelevel.fetchlets.URLTiming=WARN
tracelevel.fetchlets.propEcho=WARN
tracelevel.fetchlets.readFromFile=WARN
tracelevel.fetchlets.readMultFromFile=WARN
tracelevel.fetchlets.throwable=WARN
tracelevel.fetchlets.resourceGrab=WARN
tracelevel.fetchlets.emSDK=WARN
# The following three properties are for HTTP timeout
# Timeout value for reading Http primary header, default is 30 seconds.
httpTimeoutPrimaryHeader=30
# Timeout value for reading http secondary headers, default is 30 seconds
httpTimeoutSecondaryHeaders=30
# Timeout value for reading http body, default is 60 seconds.
httpTimeoutBody=60
omsRecvDir=C:\oracle\product\10.2.0\db_1\NSHCARE_SERVER_NS\sysman\recv
agentTZRegion=Europe/Paris
Maybe you are looking for
-
Bloqueio de reservas de materiais de contas razão especificas na transação IW32
Gostaria de saber se é possível realizar o bloqueio de materiais de uma especifica conta razão, em reservas em ordens de serviço pela transação IW32. Estou com problemas no controle de custo de materiais que são utilizados pelo setor de produção, e e
-
SSID + Layer 3 roaming across subnets
Morning Guys, I have a situation in which I have a site where all the APs are not in the same subnet and thus the IP Addresses received by my clients are different. However, all APs are advertising the same SSID which is permitting roaming at the low
-
DI: Failed Connecting to company DB
Symptom of the problem: Add-on fails to start, the DI connection error is the first thing to happen when the addon tries to initialize. Solution: Refer to SAP Note #: 884234 Note that reinstalling the DI with a matching version did not delete the Tem
-
Getting Java errors overlaying pages, is this Firefox or someone else?
I'm running Firefox 33.0.3, and have Java 8 update 25 installed (the latest one, I double checked). On random web pages I'll get an overlay over the page saying that my Java is out of date and a security risk ( Exact message is..."the page at http://
-
Workflow with images,file names and full captions.
I am working on my mother's memoirs, which will include a block of photo pages. Those pages will be laid out by a friend. I would like to use a contct sheet of some kind as a reference to what is to be included with what caption but am discovering