Wait for Session Data status does not change in EWA

The hour glass next to the early watch alert in the solution manager system has the status "wait for session data". The SDCCN in the satellite system has the RFC configured correctly and the RFC is working fine when tested. I have installed the latest ST-PI and ST-A/PI for my basis release 640 on the satellite system. The basis release of the solution manager is 701. The self diagnosis button in solution manager does not list any errors or warnings for that satellite system.
There are no errors in the task Refresh Session task in the satellite system's SDCCN:
Refresh of session overview started from destination SM_R3SCLNT001_BACK
> Sessions are up to date
Refresh of session overview completed from destination SM_R3SCLNT001_BACK
Any ideas why I can't generate the EWA in the solution manager system?

Hello, I've got the same problem, went through the note, but it didn't solve my problem.
Here I can say, that several points from the note are NOT clear (typically SAP...):
I am falling in the category with ST-PI ... or newer.
- SDCCN:
Delete any task 'Maintenance Package' in the 'To do' tab.
Ensure that no connection to SAP is maintained in:
SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
<so I deleted all the RFCs in that location>
Ensure that connection 'NONE' is maintained, and that the 'master' flag is set.
<surprisingly, now there is a connection that has to be maintained!! Also the 'master' flag is always grayed out for me and never clickable!!>
Create a new periodic task 'Maintenance Package'.
<Not working, until I added back my SM_<SID>CLNT<No>_BACK connection>
- Step 2:
Re-import the service definitions, c)
They are saying how to setup the destinations, but NOT how to import the service definitions!
So, not really sure how to interpret and apply the note... Please help! The satellite system is NetWeaver 7.3 EHP1, Solution Manager 7.1 SPS10.
It goes on... I found this link:
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0CDMQFjAB&url=http%3A%2F%2Fwiki.scn.sa…
With it, I could transfer the data to the solution manager, but I can only see 'Data is available', when I click it and tell it to start the job, SM:EXEC SERVICES 000000000400100 runs for 6-7 seconds and completes successfully, though the EWA report still says 'Data is available', but no report is being generated. I also re-executed the job SM:EXEC SERVICES and still nothing.

Similar Messages

Query for Old Data that does not match New Data within a given time period

Hello all,
One of the reports I need to create is for all associates who went from one department to another within a given time period. The way I ran this report in Reportsmith (pulling from our old system) was to compare the dept field from the beginning date to the dept field at the end date and it would give me those associate's that had moved. I had to do it this way b/c dept changes can happen using several different types of actions (supv change, promotion, etc.), none of them exclusive to just dept changes. We are now using Oracle HRMS and I need to create this same report with this system using SQL.
Does anyone know how to compare data between two different dates and pull the ones that don't match? Your help will be GREATLY appreciated!
Warm Regards,
Yasmin E. Alberto
HRIS Analyst
[email protected]

Hi, Yasmin,
In the sample data you posted, nobody changed departments between May 1 and May 11. In fact, there were no assignments of any kind between January 16 and May 17, so I wouldn't expect any output for that period.
A person (or rather, a duck) did change deptartments on May 20, so if you change the upper limit of the date range to
AND ASG_LAST_UPDATE_DATE < TO_DATE ('05/21/09', 'MM/DD/RR')you should see her.
You've probably noticed that this site likes to compress white-space.
To post formatted text (such as table results or indented code) type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.

Log version status does not change

Hi,
For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all. Can you please let me know the reason for this and how the message status can be changed to successful.
Thanks
Sreenivas

HI,
This already explained in above note please do accordingly..
See below..
Symptom
Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
Other terms
Delete, synchronous messages, message status
Reason and Prerequisites
You use the SAP NetWeaver Exchange Infrastructure.
Solution
Implement the attached correction instructions or import the Support Package listed below.
See the note.. for more details..
Note 930181 - Deletion of synchronous messages with message status 001.
Also see the note
Note 820149 - Deletion of manually changed and terminated messages
Also see the below threads
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
SXMB_MONI: LogVersion
Points rewarded if it is useful....
Regards
Chilla..

Message status does not change from in-transit [SAP Exchange Connector]

We have a Exchange Server 2003 and SXC 2.05. and we are on R/3 4.6C.
Using the SXC we can send e-mail from SAP to any internet address. But in sap we only have the following status:
"Message transferred by node to communication system".
If the message was sent correct or not by the Exchange Server, the SAP can not obtain this status. And currently the messages are being lost. s
Anyone had gone through this problem ? Any tips will be very useful.
Regards
Ballie

we are using the SMTP node
these are the messages for the documents send.
1. Document sent
2. Wait for communications service
3. Message transferred to node
4. Document deleted from queue
but they still remain in 'in-transit' state, and it is not possible to detemine why the mails are being lost
if you can help on getting a detaield trace of the mesages on the connector and excahnge end.

HT1386 step four waiting for transfer to complete does not stop? i cant get music to sync from my PC onto my i phone?

cant sync music from my pc to the phone step 4 gets stuck

Thanks for the help Rudegar but I still have the issue. Itunes does not recognize the phone in the Sync process. While I understand your original point that "what default behaviour one set the computer to do with usb devices connected don't have anything to do with itunes syncing". Do you know how to change the default setting so when I connect my phone via USB, I get the dialoug box to choose what action to take?

Date format does not change with the Regional and Language Options in 2008

I have a one-column report that was created using the SQL "select current_date" in postgres. (Thinks select getdate() ).
In Crystal Reports XI when I change the "Standards and Formats" of Regional Options to:
English (United States) the date is in the format mm/dd/yy
English (Canada) the date is in the format dd/mm/yy
Japan the date is in the format yyyy/mm/dd
In Crystal Reports 2008 when I change the "Standards and Formats" of Regional Options to:
English (United States) the date is in the format mm/dd/yy
English (Canada) the date is in the format mm/dd/yy
Japan the date is in the format mm/dd/yy
It doesn't change. Is this a bug?
Thanks in advance,
J

hey Jason,
i am going through some of the old forum posts and saw that no one replied to your language options post.
for cr 2008, there are language packs for the applicable languages. there are advantages for this as you can save installation space with the option of installing language packs for each language that you want the designer application to be in.
you have seen the disadvantage as it doesn't work the same as before.
you do not need the language packs for testing though. in the crystal reports View menu, switch up to the Product Viewing Locale to test objects which are using "system" settings such as dates.
if you do wish to install any language packs so that you can change up the actual language in the designer, go to your install media. in the install files "\package\langs\" directory, you will see a folder for each language that you need. install the desired language(s).
once you have installed a language pack and then restart the cr designer, you will now have the additional language in the View > Product Locale.
so in summary...Product Locale will change the language of the whole designer...language packs are needed for this.
Preferred System Locale can be used to test languages without having to change your windows system settings.
i hope that this helps,
jamie

STMS problem ( import status - import runnig does not change)

I have the same problem like this:
While Transporting request in our production server the status of request from import running (truck sign) does not change.
But the effect of the request is seen in the production but status does not change.
see :Re: STMS problem ( import status - import runnig does not change)
I did se14 as experts suggested, the history truck sign go away,seem work fine,
but when new request need STMS to trans, the truck sign happened again,
I need you help,thank you!

thanks for all reply,
the last two answers are the same,I think this is the right key,
I'm a ABAPer actually,yesterday I asked our headquarters basis to help,
and I don't know what he did,now this problem is be solved,
PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
thanks again!

Import status- import running does not change during the mass import of TR

Dear All,
I have successfully imported single requests in my newly installed SAP ECC EHP4 PRD system but when I have tried to import 8 transport requests(Mass Import) then the Import status is not changing from import running (Truck button still appears).
But the effect of the request is seen in the production system but the status does not change.
I have checked the logs and found that all the requests have been imported successfully but the Truck status does not change.
I have restated the system but no use still the same.
Thanks in Advance...
Latha

Import Running for a long time on ECC 6.0
The background job RDDIMPDP is running on client 000 as well as the relevant client.
Below is the TP System Log:
WARNING: System CC6. Warning. 20090914042136 :
WARNING: Background job not running properly. Function: G Jobcount: 04512801 Status: S.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
As per NOTE: 26966, it could be b'cause the background job process slots are occupied,
Regards
Vikas Nagar

Read Status does not apply correctly when working out of a shared mailbox.

since updating to the Exchange 2010 SP3 RU4, users have been experiencing the same issues when working out of shared mailboxes. when user 1 opens an email or manually marks the email as read the status does not change from their perspective, the email remains
unread. however, the other users viewing the shared mailbox immediately see the status change to read. User 1 has to re-sort his email from catagory to received or from ect. As soon as the emails are resorted the status changes. alternatively, if User 1 views
another folder and returns back. the email is marked as read.
This problem happens with Outlook 2007 and 2010
This happens after re-creating the profile
opening outlook with the switches /cleanprofile /cleanviews seems to solve the problem for an hour or so.
I have run mailbox repairs on the server for the mailboxes in question.
changing the behaviour in tools>options>reading pane> has no effect.

Hi Brenn,
To narrow down the issue, we need more investigation:
1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
4.Please switch to online mode for shared mailbox and test the issue.
Regards,
Rebecca Tu
TechNet Community Support

BAPI_DOCUMENT_CHECKIN2-Status does not allow you to change certain data

Hi Gurus,
I am uploading the DIR attached files for the Documents in PLM. We have a custom program written to upload the attached files. When I tried to upload the file I am getting the BAPI Return error as "Status does not allow you to change certain data". The status of all the documents is "RL"
File format is
Doc type Document No Rev File Name
JPS 0021581PS, X, /in/PLM/JAPAN/Files/0021581PS.xls
Please help me I need to upload the data.
Thanks,
Deepthi

Check the status network for your doc type in config. You may find that the current status may not allow you to make changes. You may need to change the current status to another status before you can make the changes you would like.
The config settings will tell you the status you may set in order to make your changes, if they are allowed.

Date and time stamp of user status does not appear

Hi, gurus.
For a specific transaction type, the date and time stamps for certain user statuses do not appear within the transaction although these missing date/time stamps are captured in the database upon checking by our ABAP. It seems that this problem started when I added several statuses and rearranged their status numbers in the status profile last year.
I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
E.g.
Status Profile
Status No.     ---       Status Code      ---            Short Text
10            ---                    IP1L                   ---       In Process 1st Level
20            ---                    IP2L                   ---       In Process 2nd Level
Date Profile
Display Position   ---       Date Type
1                          ---       In Process 1st Level
2                          ---       In Process 2nd Level
We're going to create and assign a new status profile for the concerned transaction type. We'll make sure that this status profile is sychronized with the date profile. Hopefully, the date/time stamps will all be displayed in prospective transactions but the problem on the missing date/time stamps in historical transactions will still remain.
Pls. help us.
Thanks in advance,
Theresa

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

I was changing my desktop screen saver in system preferences screen protection. Now it says it is "Loading Images" and won't stop. The Colourful wheel goes around for ever and It does not stop. Can anyone help me?

I was changing my desktop screen saver in system preferences>screen protection. Now it says it is "Loading Images" and won't stop. The Colourful wheel goes around for ever and It does not stop. Can anyone help me?

Welcome to the Apple Support Communities
I have seen a lot of cases like your issue, and it's easy to solve.
First, open Disk Utility, select Macintosh HD in the sidebar and repair permissions. Sometimes, a permission can be damaged and it makes that an application doesn't work properly.
If that doesn't work, open Finder, select Go menu > Go to Folder, type ~/Library/Prefereces, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist" and restart

Cursor does not change for pop-up window

I created a link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

Hi Todd,
i got the same problem.(cursor not change for pop-up windows) and because i m not an expert in internal html code i did try several solutions to fix it.
The easiest (but also even longer if u need to do severals) is to create a button (withs 2 overflight changing pics) with "inserer", "image survolée"
the "image survolée" can be linked to a pop-up window with the correct effect. To do so highlight the "expected new link to" and on right side task bar ad a "comportement" named "ouvrir la fenetre du navigateur" and optionally choose the size and windows available function of the pop-up. It works even if u need to proceed first with an overflight changing button.
The result is longer to obtain and not absolutely perfect. So I guess it s only an help solution for a single mateer. i would be glad to get another solution with a text link rather than using the overflight button system. Technically it should be better, more efficient and faster to proceed with applying an html code that really makes the text appearing as a classic link to a new windows whatever pop up or full size window. Please let me know if u get further answer to fix this problem.
Many thx and excuse my technical english translation about DreamCs4

Ipad2 does not change orientation. I have not used the switch for lock rotation it is used for mute

Ipad2 does not change orientation. I have not used the switch for lock rotation it is used for mute

Is there a lock symbol at the top of the screen next to the battery indicator ? If so, and as you've got the switch set to notification mute, then have you checked the taskbar (the function that the switch isn't set to is controlled via the taskbar instead) : double-click the home button, slide the taskbar to the right, and it's the icon far left.
If you havn't got the lock symbol at the top then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone. Is there a fix for this?

Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone.

My husband and I both have iphone 4's and we both have this same problem. I have an open ticket with apple, but so far they haven't been able to figure this out. First, they told me the problem was the mail server I was using. So, I tried sending/receiving invites from gmail and yahoo which they told me should work. Neither did. It doesn't matter whether the original invite was created in iCal or in Outlook or Google, once I open the invite in my mail and hit "add to calendar" the event is locked into my calendar. If the originator sends an update or cancels the meeting, I will receive an email with the new info, but the event doesn't change in my iphone calendar. This is completely lame. Why bother putting a calendar app on the phone if it can't handle basic functions?
Did you ever get a response from anyone or figure out a workaround? I'll post if I hear back from Apple with a fix.

Wait for Session Data status does not change in EWA

Similar Messages

Maybe you are looking for