Wait Step is not working in BPM, any extra settings required?

Dear Friends,
I am working on BPM scenario first time.
I am sending the Idoc from one ECC system to ohter ECC system using XI.
but in receiver side it has to updated after 60 minutes, for this 60 minutes requirment I am using Wait condition in BPM, but it's not waiting 60 minutes.
the Idoc is receiving reciever side whenever sender is sending the Idoc.
the Idoc is not going through BPM,it's going directly. In this case can I do some extra settings?
In BPM Receiver-wait-send step types are used.
Please help me in this issue.
Regards,
Shalini Shah.

Hi Abhishek,
Thanks for immediate response.
I have done the following steps:
IR:
idoc out bound interface
Idoc inbound interface
Idoc abstract interface for sender
Idoc abstract interface for receiver
Message mapping
Interface mapping
Integration Process(BPM)
here Receive-wait(60 minutes)-Send these three step types are used.
ID:
Sender business system
Reciever business system here I create the Reciever Communication channel
Import the Integration Process from IR
Two reciever determinations(source to BPM and BPM to target)
Two interface determinations(source to BPM and BPM to target)
Receiver agreement
I have done like this, if any else required Please let me know.
Regards,
Shalini Shah.

Similar Messages

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

After Mountain Lion download, FaceTime is not working anymore. Any ideas?

After Mountain Lion download, FaceTime is not working anymore. Any ideas?

I have reinstalled mountain Lion again . This time, Facetime works when somebody calls me, and I can do calls from my Mac again. But the problem was still that I was not able to call my iPad, what I was able to do with Lion (I had one Apple-ID and two call adresses). The solution was this time to generate a second Apple-ID from the Facetime in my Mac (this doesn't affect your main Apple-ID, it's only used for Facetime). Now, it works! ;-)

HT201263 these steps is not working it will go the when it's down restoring it with tell me to connect to itunse

these steps is not working because every time it down restoring it will still say ipod disable connect to itunes

Try placing the iPod in DFU mode and then restore:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

My sleep/wake button is sinking in so its not working is there any way to turn my ipod off

my sleep/wake button is sinking in so its not working is there any way to turn my ipod off

nope. If your under warranty apple will cover it. If not find a repair shop. You can try looking for an app but if it turns off then you cant turn it back on!

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

My old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen

My imessage is not working. I went into settings, then messages, and it says my imessage activation is unsuccessful. What do I do to get imessage working again. When I turn it on it sends imessae through my email not my phone number

My imessage is not working. I went into settings, then messages, and it says my imessage activation is unsuccessful. What do I do to get imessage working again. When I turn it on it sends imessae through my email not my phone number

It is starting to get a common problem (iMessage), try doing this:
http://www.imore.com/having-trouble-imessage-or-facetime-ios-7-heres-how-fix-it
Good Luck

Passwords, auto-fill in safari does not work it is enabled in settings, what can do

passwords, auto-fill in safari does not work it is enabled in settings, what can do

Private Browsing Off.
Private Browsing On.

Image drag drop not working in scaffholding. Does it require soem setting?

image drag drop not working in scaffholding. Does it require soem setting?

Hello Manoj,
The scaffolding teamplate which you use to create scaffolding page is actually a design prototype which helps you to create similar types of pages instances very quickly without authoring each page separately (for example news, aticle types of pages) and that is the concept of scaffolding only.
For example - When you go to location http://localhost:4502/miscadmin#/etc/scaffolding/geometrixx you will see a "News" page which is an example of scaffolding (this is a similar page which you can create using scaffolding template).
Now if you open this page you will be accessing http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html and here you will see already design page.
     1. if you access page properties from side kick you will see how this page is configured using target template and target path
     2. if you go to design mode using side kick you will see how the component has been design (which is similar to what appears on page when you came first time)
     3. Now come back to normal view of that page (http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) and author this page with some dummy property and click on "create" button. I know here you can not author the image as it comes as disabled empty box.
     4. once you author the content and click on create button it will create an instance of scaffolding page on the same page you can see the link on the top of same page.
     5. Now access that page, when you access that page the page will take reference of target template you configured using pare preoperties to display the page.
     6. On this page you will see the same component you configured and when you will edit it you can author the image from there directly.
Now question is why to configure same component two times half data from scaffolding and half data from page but answer is the design is correct because the page design which you have created (for example http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) is just proto type to create actual page instances and prototype can not holds values for page instance (specially image until it doesnt configured correctly for page instance in this case) which exist only when you create pages using the scaffolding page prototype. Otherwise you have to do more customization by extending scaffolding "/libs/wcm/scaffolding" changing the code and design OR you have to design it according to your target page strtucture which you have configured in page properties (specially image node).
If you want to create your own page prototype using scaffolding template and want image to associate just copy paste "/etc/scaffolding/geometrixx/news/jcr:content/dialog/items/items/tab2" node to your newly created scaffolding page prototype.
for more information on scaffolding just refer -http://dev.day.com/docs/en/cq/current/wcm/scaffolding.html
I hope it clarifies your question and help you to proceed. Let me know if you need more information or help.
Thanks,
Pawan

Any extra settings I need to make for Sql Server 2012 Install for the purpose of SP 2013

Hi,
I am going to install sql serevr 2012 Ent on a stand alone server Win 2012 box[ say Server2] and I want to make this machine as a db box and will make other box[say Server1] SharePoint box.
[ On Server1 where there is no sql server installed ].
Do I need to make any extra settings /any mappings/config entries in this box before I install sql on this Server2 box.
I mean, in terms of creation of a separate sql instance is required etc ....
In my prev.installations as a standalone SP install with sql installed on the same box.
I am facing issue with development with SP 2013. Because though I am having 16GB RAM in one of my dev machines, with the s/ws like VS 2012, SP D 2013 along with SP 2013 & SQL SEREVR 2012, the debugging is almost NOT
happening[ its taking "minutes" to hit a breakpoint] at all.
help is appreciated!
Das

HI Shankar,Just to be sure with the following settings to configure sharepoint.
Ensure both boxes in same domain and network
ensure the connection \telnet is working.
to instal sharepoint,farm account should have below rights on sql DB.
db creator,securityadmin
Check the below link for instaltion of sharepoint 2013.
http://expertsharepoint.blogspot.de/2013/11/detailed-sharepoint2013-installation-i.html
Anil Avula[Microsoft Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Is any extra isolation required when using Analog output to dirve higer power circuitry?

I want to connect the analog output of a DAQcard-1200 to a current amplifier to give 5A and a tranformer to give approx 200V, is any extra isolation required to protect the card?

Hello;
As long as the maximum current that the board can source is taken in consideration and the input impedance of the external circuitry is high enough to prevent signal reflections back to the DAQ board, you should be good to go.
However, since the protection circuitry can be built with such little budget, I wouldn't take my chances. I would go ahead and include the protection circuitry anyway.
Regards
Filipe A.
Applications Engineer
National Instruments

Wait Step is not working in BPM, any extra settings required?

Similar Messages

Maybe you are looking for