Wait time between DTP and InfpoPackage

Dear All,
Is it possible to set a constant / dynamic delay / wait time between a DTP and infopackage. I've following scenario in my PC:
DSO --> DTP --> Open Hub Destination (AppServer-Folder) --> InfoPackage --> Flat File DS
Regards,
Ender

Hi Ender,
There is a easy way to do this .
Go to PC ->edit mode ->right click on process ->Debug loop ->it will ask for waiting time in seconds  .
For some of the processes it shows option wait in place of debug loop.both are same .
Hope this will be helpful .
Regards,
Jaya

Similar Messages

  • How to keep waiting time between processed messages !!

    Hi Folks,
    I have got one scenario required waiting time between processed messages. The problem as follows !!
    File --> Proxy scenario. I receive 15 messages from sender side (same messages structure) so working with one interfaces. File picking and transforming this message and split into 2 messages. messages are receiving to receiver. I am using BPM with 7,8 steps like receiving step, block , message transformation step , internal block 1 for sender 1, internal block 2 for sender 2.
    All things are working fine, messages are going to receiver properly. But customer requirement is , wait step required between processed messages before sender1. I have put wait step still, PI picks all messages in one shot processing and waiting for 2 minutes, after 2 minutes sending all messages at the same time, this process is not working.
    I have tried with wait step in mapping (Sarvesh) given excellent idea, still PI works the same way.
    Can someone please explain a bit why the messages or not waiting message by message. I am using EOIO with Queue name and file process mode "BY NAME" and I have tried "BY TIME" as well. I have given priority to this Queue. On BPM Queue assignment : One Queue.
    Please I am expecting positive answer !!
    Many Thanks in Advance
    San

    Hi Rudolf Yaskorski ,
    Not sure about your PI release and BPM model, do you create separate process instance for each file, or do you process files collecting them in one single instance? Are you using parallelization within your ccBPM ?
    I am using serialization, I don't think bpm can do Parallization until PI 7.0, but PI 7.11 has got has queue assignment. But I am using one queue. This must be serialization.
    To me it looks like your issue is not in ccBPM but rather more in polling files (as per your post file CC polls all 15 files in one shot). So if you wish to poll the files not at the same time some workaround is required. Possible options you could check out:
    A. Either implement "wait" in your mapping based on file name or other criteria (e.g. directory name). Check out if respective BPM instances are really created at different times.
    I have used wait step in mapping. These 15 messages has to go through one interface. So I am using one interface. But I have checked mapping process time in all messages on receiver system. Shows same timing, even though I put 40000 ms waiting time in mapping.
    B. Try polling different files (or use different directories) with different channels and coordinate starting / stopping of your channels by scheduling availability for each CC in RWB. E.g. you poll file 1 with CC 1. You start 2 minutes later CC 2 and poll file 2. And so on.
    I am not clear about this . On BPM waiting step is working and it keeps wait all messages, which are coming through one interface. Then it releases all messages at the same time.
    I don't know how to resolve this. I have tried with Transport acknowledgment, but all messages are going to reciver system waiting at receiver system in priority queue and processing in EOIO, but taking so long. Rather all messages go and sits in queue, I want to stop messages by message with 2 minutes time gap. How please?
    Kind Regards
    San

  • "logon time" between USR41 and security audit log

    Dear colleagues,
    I got a following question from customer for security audit reason.
    > 'Logon date' and 'Logon time' values stored in table  USR41 are exactly same as
    > logon history of Security Audit Log(Tr-cd:SM20)?
    Table:USR41 saves 'logon date' and 'logon time' when user logs on to SAP System from SAP GUI.
    And the Security Audit Log(Tr-cd:SM20) can save user's logon history;
    at the time when user logged on, the security audit log is recorded .
    I tried to check SAP GUI logon program:SAPMSYST several ways, however,
    I could not check it because the program is protected even for read access.
    I want to know about specification of "logon time" between USR41 and security audit log,
    or about how to look into the program:SAPMSYST and debug it.
    Thank you.
    Best Regards.

    Hi,
    If you configure Security Audit you can achieve your goals...
    1-Audit the employees how access the screens, tables, data...etc
    Answer : Option 1 & 3
    2-Audit all changes by all users to the data
    Answer : Option 1 & 3
    3-Keep the data up to one month
    Answer: No such settings, but you can define maximum log size.
    4-Log retention period can be defined.
    Answer: No !.. but you can define maximum log size.
    SM19/SM20 Options:
    1-Dialog logon
    You can check how many users logged in and at what time
    2-RFC login/call
    Same as above you can check RFC logins
    3-Transaction/report start
    You can see which report or transaction are executed and at what time
    (It will help you to analyise unauthorized data change. Transactions/report can give you an idea, what data has been changed. So you can see who changed the data)
    4-User master change
    (You can see user master changes log with this option)
    5-System/Other events
    (System error can be logged using this option)
    Hope, it clear the things...
    Regards.
    Rajesh Narkhede

  • Best way to capture data every 5 ms (milli-seconds) in the .vi diagram when using "Time between Points, and Small Loop Delay tools" ?

    - Using LabView version 6.1, is there anyway to change the "Time Between Points" indicator of (HH.MM.SS) to only (mm.ss), or to perhaps only (.ss) ?
    - Need to set the data sampling rate to capture every 5 milliseconds, but the defaults is always to 20 or greater; even when the "Small Loop Delay" variable is adjusted down. 
    Thank you in advance.

    I have no idea what "Time between Points, and Small Loop Delay tools" is. If this is some code you downloaded, you should provide a linke to it. And, if you want to acquire analog data every 5 milliseconds from a DAQ board, that is possible with just about every DAQ board and is not related to the version of LabVIEW. You simply have to set the sample rate of the DAQ board to 200 samples/sec. If it's digital data, then there will be a problem getting consistent 5 msec data.

  • Can two apple devices registered to same apple ID face time with each other. My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Can two apple devices registered to same apple ID face time with each other? My scenario is face time between IPAD and IPHONE both registered in my apple ID

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Face time between usa and uganda

    I like to use the face time between USA and Uganda
    In USA - device to be used is ipad2  and in ugand - device to be used is iphone 4 ,is it possible to do face time ?
    secondly i am unable to add ugandan mobile number to my contact in ipad 2  ,the international code is 256 + mobile number.
    what is the format i need to use to add uganda iphone number to my ipad contact list.

    if i need to try with phone number, please let me know the format of number i need to save in my ipad contacts, in my orginal request , i explain the scenario i am looking for , thanks

  • Waiting time between entry posting in R/3 and avail. in BW

    Dear SAP community,
    We have set up a process chain which gives us the freedom to load GL account into BW on an ad-hoc basis.
    Unfortunately it is not really ad-hoc after we have  posted an entry in GL account in R/3 we need to wait approximately 1 hour before we run process chain in order to see posted entry. If we run process chain immediatly after posting entry we woul not see the entry in BW.
    Does anyone knows if there is a waiting time from when we post an entry into SAP R3 to when we can run the process chain and see the posting in BW?
    Thanks  a lot for you help.
    Stefanie

    Hi Stefanie,
    What is the Datasource being used?
    For old GL extractors, like 0FI_GL_4, there is a safety interval upper limit of 1 day, meaning data posted till yesterday will be extracted if the chains run today. There are workarouds given by SAP to extract most recent data for these.
    For new GL extractors like 0FI_GL_10, there is a safety interval lower limit of 1 hour, meaning the most current data would be extracted and there would be an overlap of 1 hour between delta loads and some records are extracted twice.

  • Lived in germany for 1 year and changed dvd player setting 6 times between 1 and 2

    Hi i lived in germany for one year and had american dvds with me and chnaged between german and english more than 6 times now i am in america and only can watch german videos.
    Does somebody now how to change a 7th time?

    Wikipedia has some more information in this article, DVD region code:
    In most computer drives, users are allowed to change the region code up to five times.[10] If the number of allowances reaches zero, the region last used will be permanent even if the drive is transferred to another computer. This limit is built into the drive's controller software, called firmware. Resetting the firmware count can be done with first- or third-party software tools, or by reflashing (see above) to RPC-1 firmware.

  • Outlook - Difference time between inbox and sent

    we used Outlook 2010, and our e-mail server is hosted outside the company. Nowadays, in some computers, there is a difference between time in inbox and time in sent . for example, we sent e-mail at 10:40, the delivery report shows 10:40 but it
    bearing in sent at 11:40. on the other hand, when we open mailbox from internet explorer through OWA, the inbox and sent time are correct which is 10:40. We release Microsoft fix it 51015 but still no change happened. could you please help us. we used Windows
    7or xp

    Hi,
    According to my knowledge, the issue may be cause by the incorrect time or time zone settings on one of the computers. To confirm it, we can firstly verify all computers involved are set to the correct time, time zone and daylight savings time settings in
    Windows Control Panel’s Date and Time applet.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Time between CH1 and CH2's waveforms

    Hi Everyone,
    As per attached picture, I need to measure the time between the STARTING time of CH1 (rising) and END of CH2 waveform (rising).  Could anyone provide some sugestions as to how to accomplish this?  Thanks very much,
    Frank
    Attachments:
    TEK0013.JPG ‏82 KB

    Dennis,
    As I mentioned before it looks like there is a problem or bug with the Basic_Level_Trigger_Detect function.  Everytime that I open this vi it appears as a "clone" copy and I can not change any of the invisible controls.
    After I replaced these vis with new vi's from the palette, I can change this control from invisible to visible.  Then after running my program the Basic_Level_Trigger_Detect function will revert back to "clone" again.  I changed the number of trigger setting to 10 and also reverted back to 1, even though a new copy from the palette will have 10 times on this setting.  Please see attached code for more info.  The text file contains the failure data.  Again it seems that the Basic_Level_Trigger_Detect function is not very dependable or releable.  Thanks,
    Frank
    Attachments:
    TDS1012B Acquire Multiple Waveforms_SwitchingTime2a.vi ‏70 KB
    Switching time.txt ‏1 KB

  • What's the best way to sync the time between FP and host?

    I have tried with Set Date and Time (Client).VI and Write Time to FP RT Module (Server).VI in order to synchronize the time, but I have got different behaviours running this VIs. Is there any recommended way to do it?

    The easiest way would be set the host to be the time server of the FP module. The host would have to be a static IP address and running the Logos Time Server. Otherwise if you have LabVIEW RT 7.0 there is a VI in the RT>>Utilities palette which allows you to programmatically set the time of the FP module.
    Regards,
    JR A.
    Application Engineer
    National Instruments

  • My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

    Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
    1. Why is my phone doing this?
    2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
    3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
    4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
    5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
    Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Lag time between Client and WebDAV Update

    If I check out a file, make modifications, and then check it back in - it is immediately visible to everybody who connects to server via VC Client software (ie, Bridge or Adobe Dialog.)
    However, it takes several minutes (up to ten) for the same change to be visible to people who are connected to the server via WebDAV.
    A ) Is this related to Version Cue not pushing the correct data (the "stat" on the file give the correct date. The file will say it was modified at the write time, but opening the file gives the wrong data.)
    B ) Or is it a Mac system thing, where it is caching the WebDAV data?
    Thanks,
    Stephen

    I think you phone is in xeptional case, otherwise it should not happenn....

  • Lag time between instrument and GB

    I'm trying to lay down some bass lines. I'm running a Line 6 PODxt Live via USB into a Mac Mini which is a G4 1.25GHz with 512 of RAM. There seems to be about a half-second delay between what I'm playing and what actually gets recorded. Is there a way to stop this?

    This is called "Latency" and is a product of the processing a computer does before it plays the sound (i.e. the sound goes through an A/D converter, into the computer, it's written to hard drive, perhaps processed with some digital effects, etc)
    The first thing you can try is setting GB's preferences for "Less Delay". Also, if you're using any effects (Like one of the bass Amp Sims, I'd try skipping that during the recording)
    Hmmm, and thinking a little further, I don't know anything about that interface, I'm assuming it doesn't offer a Zero Latency Monitor, but if it does, monitoring directly from the interface can eliminate latency.
    --HangTime [Will Compute for Food] B-)>

  • Render time between fcp and motion

    I make my own project in motion 3, this project is something like a slideshow but I used a new camera, a light, and the images (png files) in a 3d way. the number of media in the scene is always low, one ore two without filters too. Anyway, when I export the animation directly from motion to a .mov file I obtain a render time very quick, but if I import my motion project in fcp I can't work with this; just the visualization time is prohibitive! than when I export through compressor or directly from fcp tha application crash!
    so my question is what elements fcp doesn't like? light? camera? 3d elements?
    this time I solved the problem exporting my clip from motion like file.mov but I only move the problem... I cant't archive my project, it's to big!
    thank you
    G5   Mac OS X (10.4)   8 GB RAM

    In my experience, these problems are more likely to crop up when using oversized images. Especially those greater than 2k or 4k (depending on your card). Motion gets a larger "workspace" on its own than when invoked to render from within FCP or Compressor...
    Patrick

Maybe you are looking for