Waiting for a connection...

I have installed the Adobe Inspect app on my Android 4.4.4 , I have installed the extension for Google Chrome on my Window 7 desktop, I have installed Adobe Edge Inspect CC on my Window 7 desktop. I am signed in to creative cloud. Both the device and my laptop are connected to the same WiFi network.
I cannot get the Android device and laptop to recognize each other. The extension in Chrome, it's just spinning and says "Waiting for a connection..."
I have tried tapping the "+" on my iPhone and have added the IP address manually and get the message "Connection unseccessful, please try again."
Connection to Port 7682 is established only when Edge inspect is running.
Firewall Connections are open . Find below the screenshot.
Screenshot
Console tab in background.html on chrome browser does not gives any error.
Please assist and help me resolve the issue.

Most likely devices and desktop are not connected to the same WiFi Network, or something is blocking port 7682 that Edge Inspect uses for communication between the apps. You might also want to check with IT department to see if they block communication across that port.

Similar Messages

Waiting for a connection... all the time

Hi there
Waiting for a connection...
This information display all the time after instalation wht's I'm doing wrong - network that I use is my home wi fi because of other device thath i want to pair

1. Do You have installed on Your PC and turned on Adobe Edge inspect CC
2. and You are Login create Adobe creative cloud ?
I'll try instal with new account on other PC and try to write down step by step how to run this.
There is always small thing that mess up everything
Try one more time:
In chrome select change status from O to I to turn on EI turn on your EI in PC and when you see in chrome Your name and IP adress open application on mobile (should work in same Wi-Fi both PC and mobile) Click + sign and input your IP adress and Join

STILL WAITING FOR BROADBAND CONNECTION

I placed an order to switch my phone and broadband from sky to bt on 22nd June 2011. My line was activated on 13th July and broadband equipment arrived also. However I got a call saying my line was not capable of holding the 24MB broadband and there would be a couple of days delay and then I would have the 8mb connection. Several frustrating phonecalls to India and empty promisesof activation later here we are on 1st August 2011 and I am still waiting, meanwhile my call charges are increasing as my broadband package includes calls. I was informed that my original broadband order would be cancelled and a new one would be placed and it would take 48 hours to get an activation date. I have just spoke to them again and they claim to have spoken to the exchange department and now they are telling me I cannot get broadband at all until December and then she cut me off. As i am still with sky for broadband and the migration has not taken place i am paying an additional £7 per month as i have lost my phone & broadband discount. Now after speaking to someone from BT in the UK I have been told there is a technical problem preventing me from getting broadband. Please can you help.

In this case I think the best solution would be to contact the mods, you can do that by following this link: http://bt.custhelp.com/app/contact_email/c/4951
Regards Edd
Check your Line
BT Speedtester

Change connection timeout, not found waiting for dialup connection

Using Firefox 6.02 on Vista 32.
The dial-up connection is slow connecting which cause Firefox to time out with a page not found while waiting. Is there a setting to extend the time out?

Mark,
This has been implemented in Headstart PATCH6530_for_6i and PATCH6530_for_9i.
Regards,
Marcel

SAP installation guiengine:No GUI server connected;waiting for connection

Hi All,
I need one help
I am trying to install SAP ECC 6 in Redhat Linux 5 and database oracle
I have installed java 1.4.2_16, I have set the environmental variables also.
But if I start the SAP installation by executing SAPINST , I am facing the below error
guiengine: No GUI server connected; waiting for a connection on host welcome, port 21200 to continue with the installation
I have tried to execute xclock to check it, but its gives the below error
ERROR: canu2019t open display: welcome:0.0
I found that before setting the below display environmental variable, xclock worked good, but after setting the below display environmental variable, I am facing this error
export DISPLAY=hostname:0.0
I searched for this error, some people posted that we have to change the display environmental variable like export DISPLAY=:0, set DISPLAY=:0.0,
I tried it but still facing the same No GUI server connected error.
I hope it will be a problem with display environmental variable and I have no other clues, please help me, Thanks.
Thanks,
Senthil.

Hi,
We are trying in my personal laptop, so I have not set any ip addess. Is there any other way like our loop back adapter settings in windows, to configure ip address in Redhat linux 5 in individual machines.
Also I searched in forums few other people who has already faced the same error. They have set the display environment variable export DISPLAY=ipaddress:0.0 with ip address but they also has faced the same error and itu2019s not resolved.
Please help me if there will be any other reason for this error, Thanks.
Thanks,
Senthil.

Waiting for connection

Hy
I have created a class which make the user interface and a class which is taking care of connection to a server.
I would like that UserInterface class to waint until the ConnectServer is finished the bussines and only then to continue; but in the same time to repaint itself if necessary.
If I make the ConnectServer class a thread the UserInterface is not wainting for answer otherwise is not repinted itself.
public class UserInterface extends JFrame implements ACtionListener
JButton button;
Connection connection;
UserInterface()
button=new JButton("Connect");
button.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource==button)
ConnectServer cs=new ConnectServer();
// I want to stop here until the connection to server is finished but in the same time to repint itself if necessary
connection=cs.getConnection();
Thank you!

Unfortunately this has nothing to do with JDBC.
Basically you have two things that need to happen at the same time. So you need two threads. And a way to communcate between them. One thread waits for the connection and sets a flag when it it waiting and when it is done. The other thread reads that flag.

Help with flex4unit ant build.xml: Socket timeout waiting for flexunit report

I'm having trouble setting up ant to build and test my project locally and I'm not sure what the next step is.
Info:
Running on XP/Cygwin.
All of the files that FlexUnit4 references when used in Flash Builder are in my '${basename}/libs' folder (eg FlexUnit4_1.0.swc).
I've placed the flexunit4 task in my ant/libs folder.
I'm getting two errors...
I don't think I've set up the 'socket' stuff right for the tests. It just sits and waits then dies...
[flexunit] Waiting for client connection ...
(about a minute later)
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
BUILD FAILED
java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
Plus this is the error I get from the flash player:
ReferenceError: Error #1065: Variable mx.skins.spark::BorderSkin is not defined.
I don't know why it's complaining about Borderskin as I think I have included all the flex4 libs I could find. I suspect this second error is causing the first error?
Any help appreciated. I think I'm just setting it up all wrong.
Screencap of errors:
http://twitpic.com/l7ay8
build.xml:
http://gist.github.com/20804

Finally got everything working using the files from the CI Example which what i probably should have done in the first place.
So a rough guide for anyone just starting out with this:
Download the Flex 4 'workspace' from the digital primates hudson server . This appears to contain flexunit library and examples in various stages of development.
I used Flex Builder 4 Beta 2 to set up my Test Suite and Test Cases.
I then loaded the libs folder from:
workspace.zip\workspace\project\FlexUnit4SampleCIProject
into my flex project's libs folder:
this includes:
FlexUnit4.swc
FlexUnit4CIListener.swc
flexUnit4UIRunner.swc
flexTasks.jar
flexUnitTasks.jar
I didn't need to remove the FlexUnit4 stuff that is 'referenced' automatically by flash builder when you start adding flexunit4 tests/suites.
Then I used a modified version of the TestRunner.mxml found in:
workspace.zip\workspace\project\FlexUnit4SampleCIProject\src\test\flex
The lines to pay attention to are the ones that look like:
static public function currentRunTestSuite():Array {
    var testsToRun:Array = new Array();
    testsToRun.push(packagename.TestSuiteName);
    testsToRun.push(packagename.TestClassName);
    return testsToRun;
Just make sure you update this list to include all of the test suites &/or individual tests you want to run.
I made this a static function and modified the code in the "FlexUnitApplication.mxml" file to use this function so i'd only need to update one list of suites/tests.
FlexUnitApplication.mxml is generated automatically when you run FlexUnit4 tests in the Flash Builder 4 Beta 2 IDE.
This is the build.xml file I'm using in the project:
http://gist.github.com/208211
Change the name of the project from "Flare" to whatever and adjust the other path settings where required (though you might want to write this from scratch at least once so you understand roughly what is going on).
The Debug Flash Player must be installed on the server otherwise you'll get a:
java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
...while it waits for the non-existant debugger to attach. (This is obvious but I did forget and was a bit bewildered for a moment)
Need to also ensure the environment variable:FLEX_HOME is set to the location you installed the flex sdk...by editing your .bashrc setting the environment variable the in the Hudson Configuration.
You'll need to point Hudson at your ant installation and your jdk installation. If you downloaded he sdk, be aware you might need to point it to the jdk folder inside the place you installed the sdk.
And I think that's all the problems I had. Hope it's useful to someone... if anyone who actually knows what they are doing can point out any potential issues/better ways of doing things, feel free to comment.
Thanks to Brian (legrosb) and Mike (mlabriola) for their assistance!

Apple TV 2 Waiting for network services, unable to sign in to iTunes store

Received my Apple TV yesterday.
It is connected to my network (I have tried wired and wireless).
I can view movie previews and Podcasts.
I cannot sign in to the iTunes Store (therefore cant rent movies), cannot view Youtube videos (No content available), cannot use Netflix (Waiting for network services when I try).
I spoke to Apple support, they couldn't help. They say the problem is with my network or my ISP.
I have a Linksys WRT160N router, on which I have tried disabling the firewall.
My ISP is Telus, I am on their Fibre Optic network in BC. I wonder if Telus are blocking Apple TV?
Anyone else experiencing this?
Message was edited by: gbcecanada
Message was edited by: gbcecanada

I received my Apple TV yesterday.
I am running cable internet with 10Mbps constant.
So I connected it up and proceeded to issue after issue. I could not log into my Apple account. It was stating that my name or password was incorrect.
When I would start the unit it would stay at the waiting for network connections screen for several minutes!
I did all the tricks of turning the apple of and back on, NO FIX.
I tried to update the software, and I recieved a message that stated I have the most updated software, so....NO FIX
I did a full restore. The Apple TV downloaded the newest software and rebooted after about 7 minutes, NO FIX
I logged into my router and opened all ports, added ports 80 and 123, NO FIX
I also disabled my entire firewall on my router and turned off the WEP security feature...and what would you guess.....NO F I X!!
So I logged back into my router and reset all my original settings...still NO FIX.
SO here is the good part...Apparently the system has to connect to time.apple.com and get updated...it's sort of like a verification of the system.
So after it updated everything worked great! No unable to sign into my account. NO waiting on network connections anymore.
So the biggest advice I can give, especially after my 3 hours of gradually wasting my time until I almost threw the unit out my bedroom window, is connect it to your WIFI system and let it sit by itself for a few hours and let it connect to the Apple server.
Hope this helps everyone that, at some point, has shared my pain and frustration.

HT201413 Why is it my songs or none of my information appearing in my ipod? What can i do? its been a whole 2 days connected to my itunes and it still says waiting for items to copy

Why is it my songs or none of my information appearing in my ipod? What can i do? its been a whole 2 days connected to my itunes and it still says waiting for items to copy

my iPad it get stuck on step 8 with a prompt that says "waiting to copy items" it stays on like that for hours
Reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
I recently upgraded to to the iOS 5 on my iMac and iPad
You don't need to manually sync using iOS 5.
Help here > Apple - iCloud - Learn how to set up iCloud on all your devices.
Message was edited by: Carolyn

After i upgrade my ASA 5505 from 8.2 to 8.4 i can no longer connect to ASDM. showing connecting ..... please wait for hours now

after i upgrade my ASA 5505 from 8.2 to 8.4 i can no longer connect to ASDM. showing connecting ..... please wait for hours now

Ron
I recently looked at this question with a customer who has been running 8.2 and needs to get some features in newer code. We decided that it made more sense to go to 8.4 than to 8.3.
HTH
Rick

" the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?

It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

When I connect my iPhone 5 (iOS 7.0.4) to iTunes it gets stuck when syncing on "waiting for items to copy"

My iPhone 5 running iOS 7.0.4 gets stuck on "waiting for items to copy" when syncing to my iTunes (version 11.1.4). I've tried;
quiting and restarting iTunes,
updating iTunes,
restarting my computer,
restarting my iPhone,
turning off iCloud on my iPhone,
restoring my iPhone from a previous back-up,
disabling "automatically sync when this iPhone is connected" and
just leaving it alone for three hours to see if it would finish syncing
But none of these things have worked... I'm not sure what else to try. My iPhone suffered an error about three days ago when trying to update to the new iOS update and went into recovery mode. I had to restore from an old back-up and that is when my troubles began. However, I was previously (before the crash) having an issue where whenever I connected my iphone to my computer it would delete all my playlists. I'm not sure if any of that is relevant.

My iPhone 5 running iOS 7.0.4 gets stuck on "waiting for items to copy" when syncing to my iTunes (version 11.1.4). I've tried;
quiting and restarting iTunes,
updating iTunes,
restarting my computer,
restarting my iPhone,
turning off iCloud on my iPhone,
restoring my iPhone from a previous back-up,
disabling "automatically sync when this iPhone is connected" and
just leaving it alone for three hours to see if it would finish syncing
But none of these things have worked... I'm not sure what else to try. My iPhone suffered an error about three days ago when trying to update to the new iOS update and went into recovery mode. I had to restore from an old back-up and that is when my troubles began. However, I was previously (before the crash) having an issue where whenever I connected my iphone to my computer it would delete all my playlists. I'm not sure if any of that is relevant.

I use BT Yahoo! but when I try and navigate to email from the home page it keeps jumping between 'connected and waiting for login' and never loads up.

My internet service provider is BT in the UK. The home page is www.btinternet.com. After I've logged on, the home page displays fine - I can see the summary of my emails in one of the windows on the home page. The problem comes when I click on the mail application. The page then tries to load the email application. However, it never actually loads, it keeps jumping between connected and waiting for login. It never achieves it so I just have to click the 'back' button to get to the home page. I use chrome and ie but neither has this problem.

I retraced my steps to how i got the Google app:
App Store icon on Home Screen > Search, at bottom > entered Google
The first Google App on the screen appears:
Google logo small g in blue square: Google Search; Open (because it is already installed). Below that is a picture of the iPod with the usual Google Search screen. I have never inserted a link into a discussion group so i hope you can open this.
http://https://itunes.apple.com/us/app/google-search/id284815942?mt=8
Does this bring us any closer?

HT4972 I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3. I have it connected to my computer, and the summary in itunes indicates the update is available. However, when I click "update", it opens Windows Explorer and waits for a file name to

I am trying to update ipod touch from ios 4.3.2 to ios 6.1.3. I have it connected to my computer, and the summary in itunes indicates the update is available. However, when I click "update", it opens Windows Explorer and waits for a file name to open.

I am not at that computer now, but I did check via windows update & with the check updates menu choice in the itunes program - neither indicated a newer version of itunes is available. (it is a vista computer).
The itunes software on the computer displays my ipod & the current ios (4.3.2), and indicates a newer ios is available (6.1.3). When I choose "update", I am taken to Windows Exploer and prompted to choose a file to open. it is as if the "update" button has the incorrect code attached to it.
The ipod is working, but there are several app I would like to install, but I can't with the current ooperating system.

HT1212 My Ipad has been permanently lock because incorrect password has been enter too many times. Normally, it will ask to wait for 60 minutes but this is not available, the only option, it says to connect to Itunes. I cannot connect to ITunes either.

What can I do to unlock the IPAD if I cannot access the device by using computer? When I connect to computer, it says I have to unlock the IPad to connect to itunes.
I try everything but I cannot figure out what to do. I turn off IPAD and it still stay in the connect to Itunes mode. It does not goes back to wait mode.
Any suggestion would be appreciated.
Thanks,
Bill

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Waiting for a connection...

Similar Messages

Maybe you are looking for