Waiting for a reboot from a previous install

I'm building a VM to show the boss what we can do with Sharepoint 2010, but can't get it installed. This is a fresh install of 2008R2, all the updates are applied, and it's joined to the domain. All the pre-req's installed fine. I've re-booted and shut down
the server several times, but still get this when I try to isntall:
Any ideas?

Marc
Can you check the following registry keys Bill pointed out in this post. 
http://social.technet.microsoft.com/Forums/en/sharepoint2010setup/thread/bccdb9f1-dd91-4db1-bd19-6bfa658727f5
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\UpdateExeVolatile - if the value of the UpdateExeVolatile registry key is anything other than 0 you will see this message.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations - if the PendingFileRenameOperations registry key has any value you will see this message.
See additional information below:
To remove an orphaned UpdateExeVolatile registry key value
Open a registry editor, such as Regedit.exe or Regedt32.exe.
Navigate to HKLM\SOFTWARE\Microsoft\Updates\
In the right navigation pane, double-click the UpdateExeVolatile key.
Configure the key with a value of 0
Close Registry Editor.
To delete the orphaned PendingFileRenameOperations registry key
Open a registry editor, such as Regedit.exe or Regedt32.exe.
Navigate to HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\
In the right navigation pane, right-click the PendingFileRenameOperations key and select
Delete.
Close Registry Editor.
Kris Wagner, MVP, MCITP, MCTS Twitter @sharepointkris Blog: http://www.sharepointkris.com/blog

Similar Messages

  • Reboot from a previous install pending

    K...
    I was having issues with owa in general. Have Exchange 2007 SP1 running on Server 2008. I uninstalled the client access portion and when I go to reinstall, i continually get "Error. A reboot from a previous installation is pending. Please restart the system and rerun setup. I check in the registry to see if there was something in "FileRenameOperations" and nothing. Rebooted just for the hell of it and still getting the same error. I have no idea what is going on. I am currently using this server as the front end and the back end has all the mailboxes on it. Reinstalling IIS7 is not an option considering it is running SCCM 2007 which the boss would go ape if we lost it just because of this error. Anyone out there have any suggestions?

    Hi There,
    (for those with similar issues)
    There seems to be another orphan value you could check. See:
    http://technet.microsoft.com/en-us/library/cc164360(v=EXCHG.80).aspx
    regards
    D...

  • Every time i try and update firefox a window pops up ad says that I must reboot firefox from a previous install and when i do and i try to reinstall firefox the same pop up comes up and it won't let me update to the new version

    when i try to update firefox to the new version and i go to install it it tells me to reboot the system from a previous install of firefox so i go and reboot the system and it keeps saying the same thing.

    Try this:<br/>
    # Close Firefox.
    # In Windows Explorer, go to the following location: '''%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates'''
    # Delete everything in that folder.

  • Exchange 2010 SP3 /PrepareAD failing; "A reboot from a previous installation is pending. Please restart the system..." error

    I am attempting to prepare our Exchange 2010 Server (RTM) for an upgrade to SP3.
    When attempting to run "setup.com /PrepareAD" to prep the AD schema, the command fails and I receive the following error in the ExchangeSetup log:
    [12/19/2013 21:50:48.0650] [1] Beginning processing Get-OrganizationConfig
    [12/19/2013 21:50:48.0665] [1] Searching objects of type "OrganizationConfig" with filter "$null", scope "SubTree" under the root "$null".
    [12/19/2013 21:50:48.0806] [1] Previous operation run on domain controller 'DC1.company.com'.
    [12/19/2013 21:50:48.0806] [1] Preparing to output objects. The maximum size of the result set is "unlimited".
    [12/19/2013 21:50:49.0945] [1] Ending processing Get-OrganizationConfig
    [12/19/2013 21:51:42.0753] [1] [REQUIRED] A reboot from a previous installation is pending. Please restart the system and rerun setup.
    [12/19/2013 21:51:43.0190] [1] Ending processing test-setuphealth
    [12/19/2013 21:51:43.0221] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    [12/19/2013 21:51:43.0283] [0] End of Setup
    I am receiving this error when attempting to run "setup.com /PrepareAD" from either of our two GCs and I get the same error from both GCs, so the issue doesn't appear to be related to the individual servers.
    What should I be checking, to clear this error so the AD schema update can be performed?
    Environment
    Exchange:  Exchange Server 2010 RTM
    Server: Windows 2008 R2 (fully patched)
    Domain and Forest functionality: Windows 2008 R2 native

    One follow up:
    If I go into regedit, I see that under HKLM\System\CurrentControlSet\Control\Session Manager  there is an entry from when I recent installed Google Chrome.
    The entry looks like:
    MultiString: PendingFileRenameOperation
    Value Data: \??\C:\Program FIles (x86)\Google\Chrome
    Is this "pending rename" what's causing SP3 to refuse to install, because it thinks the OS install state isn't 'clean'?

  • Exchange management tools error "reboot from a previous installation pending"

    I am trying to install the Exchange 2010 Management Tools onto a client. We have Exchange 2010 running already elsewhere, but have been doing RDP to the server in order to add mailboxes, etc., need to have more administrators on their own Windows 7 client
    computers doing remote management.
    Windows 7 Enterprise (64bit) client computer in same domain as Exchange servers, UAC disabled, logged in as a domain administrator. Fresh restart. No updates pending. Noticed article
    http://technet.microsoft.com/en-us/library/cc164360(v=exchg.80).aspx "A Restart from a Previous Installation is Pending" and numerous posts that indicated I should
    clear "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\UpdateExeVolatile" or clear "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations" - but neither of these keys
    exist on my computer!
    Downloaded and unzipped Exchange2010-SP3-x64.exe to C:\Temp
    Ran C:\Temp\setup.exe
    Checked off the options:  a) Error Reporting - Yes (Recommended). b) Custom Exchange Server Installation. c) Select "Management Tools". d) LEAVE UNSELECTED "Automatically install Windows Server roles and features required for Exchange". 
    Get the following errors
    Summary: 3 item(s). 1 succeeded, 2 failed.
    Elapsed time: 00:00:22
    Configuring Prerequisites
    Completed
    Elapsed Time: 00:00:01
    Management Tools Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Warning:
    Setup cannot contact the primary DNS server (172.17.253.51) using TCP port 53. Check that the IP address of the DNS server is correct and that the DNS server is reachable.
    Elapsed Time: 00:00:17
    Languages Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Warning:
    Setup cannot contact the primary DNS server (172.17.253.51) using TCP port 53. Check that the IP address of the DNS server is correct and that the DNS server is reachable.
    Elapsed Time: 00:00:03
    Already have reviewed many articles on this topic, none seem to apply to my situation. I am going crazy trying to solve it.

    As I've said this workstation meets the requirements for installation of the Management Tools. It is 64bit.
    Thanks for the link to the exchangeserverpro.com installation instructions blog. It is something I had already reviewed. There are many comments with problems, so many in fact it is confusing what finally worked for people who ran into snags.
    Many also reported the "reboot from a previous installation is pending" problem (that I am getting), but their solution to that problem is not obvious, since, as I originally posted, the Microsoft answer to that error message is contained in "http://technet.microsoft.com/en-us/library/cc164360(v=exchg.80).aspx"
    and the registry keys do not exist on my Win7 client. The other solution in the comments seemed to be to exclude the "Automatically install Windows Server roles and features required for Exchange" during install (but so far Ed and Rajith want
    me to include that option). The blog is quite old, and so I hoped the SP3 for Exchange 2010 would have fixed the installer issues identified in the comments on that blog... but apparently not!
    DNS is working in our environment. The IP address in the error message points to a network load balancer (NetScaler by Citrix) and does not respond on telnet using port 53... It is our standard DHCP-provided configuration for client DNS. (Does the
    Exchange installer for Management Tools have some unique DNS requirements beyond normal name resolution? If so, does the Exchange admin need DNS admin rights?) Just to remove the load balancer from the equation, I changed my Win7 client network adapter settings
    to use two real, physical actual Microsoft AD domain controllers to resolve DNS. I performed an IPCONFIG /FLUSHDNS. Then re-ran the Exchange 2010 installer. The specific error for DNS has gone away now that I am not using our enterprise's standard load balancer
    DNS client configuation. I really need to know why this is an Exchange management tools requirement. Any ideas?
    But still no-go on getting the Exchange 2010 Management Tools to install. Here are the latest errors on the Readiness Checks:
    Summary: 3 item(s). 0 succeeded, 3 failed.
    Elapsed time: 00:00:25
    Configuring Prerequisites
    Failed
    Error:
    The following error was generated when "$error.Clear();
              if($RoleInstallWindowsComponents)
                # Install any Windows Roles or Features required for the Management Tools role
                if ($RoleIsWindows8OrHigher)
                  if($RoleADToolsNeeded)
                    $ADToolsNeeded = 1
                  else
                    $ADToolsNeeded = 0
                  Invoke-Expression " Powershell -Command {& $RoleBinPath\InstallWindowsComponent.ps1 -ShortNameForRole AdminTools -ADToolsNeeded $ADToolsNeeded} "
                else
                  Install-WindowsComponent -ShortNameForRole "AdminTools" -ADToolsNeeded $RoleADToolsNeeded
            " was run: "The system cannot find the file specified".
    The system cannot find the file specified
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:00:01
    Management Tools Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:20
    Languages Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:03
    If I remove the "Automatically install Windows Server roles and features required for Exchange" on the installer, I do not get the PowerShell error, just the "installation is pending" errors:
    Summary: 3 item(s). 1 succeeded, 2 failed.
    Elapsed time: 00:00:39
    Configuring Prerequisites
    Completed
    Elapsed Time: 00:00:00
    Management Tools Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:12
    Languages Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:02
    Which puts me right back to where I started in this thread. 

  • Firefox freezes about five seconds after I open it, and whenever I use Ctrl+alt+delete to close it I get told that it is waiting for a response from me.

    I am having a problem with Firefox. Whenever I open it, it runs fine for about five seconds and then freezes. A small white rectangle appears in the upper left corner of the browser window. The screen still scrolls fine, but whenever I try clicking on anything (including the menus in the toolbar), it just gives me an unresponsive 'ding' sound. When I try closing the programme with Ctrl+alt+delete, I get a message saying 'The system cannot end this programme as it is waiting for a response from you'. I originally had this problem with an earlier version of Firefox and tried installing Firefox 4 to see if this helped. It worked for two days and began doing it again. I have already tried un- and re-installing Firefox and restarting my computer, and Firefox will not run properly for long enough to let me disable any add-ons or plug-ins. What can I do to fix this?
    I've added a couple of screencaps of the problem. (or tried to)
    [http://i53.tinypic.com/161hvh2.jpg The white rectangle]
    [http://i51.tinypic.com/dwsq1.png Error message]

    Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

  • SCCM does not wait for Soft Reboot in deployments with dependencies

    This is a difficult thing to search for due to its granularity, so I apologize if this is a repeat topic.
    I am deploying an application with a dependency that returns the '3010' code to tell client to perform a Soft Reboot. The outcome I intended was for SCCM to install the dependency, wait for a reboot (as is the nature of the Soft Reboot to my knowledge) and
    then continue with the installation of the primary application after the user reboots.
    However, in practice this is not what SCCM does. Instead, it seems that the notice for a Soft Reboot is acknowledged by the client, noted by the expected popup the user sees as well as the 'restart required' message in Software Center, but the deployment
    process continues on in the background with the installation of the primary application being deployed. It almost seems like a bug, but maybe this is the intended behavior of SCCM 2012. I just can't find any documentation anywhere that speaks to this.

    I think this may have been a misunderstanding on my part about the specific definitions of "Hard Reboot" vs "Soft Reboot". I thought the former would immediately restart the computer, but perhaps it only halts other installations until a restart is performed
    by the user? And then a "Soft Reboot" basically would just act as a passive notification to the user that they should restart at some point, but the client itself would not actually take any action?
    It was just confusing to me that Software Center displayed the 'restart required' status yet continued with the next part of the deployment.
    To actually answer your question, I have not tried configuring the app deployment type to "Configuration Manager client will force a device restart" because to me that sounded like the client would immediately force a reboot regardless of the return code,
    but I only wanted the computer to reboot if the application installation returned the '3010' code (it can return others), and thus the default of "Determine behavior based on return codes" seemed the most appropriate option.

  • For some reason my video just says, "waiting for a response from _____"?

    For some reason the video chat doesnt even read that the other person has accepted the chat? I know the person who I am trying to video chat has no problem connecting with other people. Help please?

    HI,
    iChat 2 through to iChat 6 then Messages beta in Lion and Messages full app in Mountain Lion can do Video chats.
    I have an older G4/1ghz Dual Processor computer booted in to OS X 10.4.11 and iChat 3.1.9
    I have issues with Messages trying to Invite the iChat 3.x.x machine.
    It's video chat window does the same as yours, stating  it is " Waiting for a response from xxxx"
    However no Visible invite ever appears on the iChat 3. computer.
    On the other hand I can invite from iChat 3 to Messages and make a connection.
    I am not having a issue from Snow Leopard (iChat 5) to Messages in Mountain Lion.
    I had based my first reply on the Question
    For some reason the video chat doesn't even read that the other person has accepted the chat?
    (i.e. nothing about the computers involved).
    From the newest MacBook Pro (not retina) to the new MacBook Pro (not retina).
    This bit in your latest reply does really tell me where you bought them and what was installed when you got them and what is Installed now.
    Some people have described problems on Lion machines after installing the latest Apple Remote Desktop Client
    (Everyone has Apple Remote Desktop Client on their System and it is used with iChat in iChat Screen Sharing - it provides the Engine as it were.  It also does the Screen Sharing within the Finder as well as providing one end of the Apple Remote Desktop help)
    As a starting point I would go to the app's menu > Preferences > Video Section ans set the Bandwidth Limit on both machines to 500kbps
    This can help if there are vast differences in Internet speeds at either end.
    8:01 PM      Tuesday; August 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Still waiting for a response from Adobe regarding the post "Printing a pdf from a marked-up pdf".

    Still waiting for a response from Adobe regarding the post "Printing a pdf from a marked-up pdf" dated 15 Dec 2012 9:20 AM.

    Look everyone that comes here with a support problems has gone through all the normal channels, around and  round in circles with no one seeming to be interested. They've called every phone number, every email address they can find. They have been put on hold and bounced fifty times to another operator only to be hung up on. If Adobe would bring back support to main land and have people that know what's going on instead of having people that people can barely understand read from scripts. Scripted information only applies about 10 % of the time. I'm just giving people an alternative. after they have torn their hair out going the normal route.  If they had been able to get a solution they wouldn't be coming here for help.
    There should be a forum set up just for people to air these issues and Adobe employees forced to man it. Then we wouldn't have to have such a Bad attitude. Right now Adobe's Support reputation is worse than Intuit's which did have the absolutely worse on the Planet. Now they are number 2.
    You know it yourself that Adobe's support is absolutely worse than terible. However to prevent me from being banned from the forums I will simply will provide the adobecare email address from now on
    So let's sweep it under the rug.

  • Application waits for a responce from the DB ...

    Hi friends,
    I have a multi threaded .NET application that interacts with ORACLE 10g DB.
    When the multi thread is executing for less than 4hrs continuously there is no problem, but if it continuous execution for more than 5hrs the application doesn't respond.
    To track the problem i have followed the standard logging process i.e. to a file. When i analyzed the file i could see the application sending a request to the DB and waits for the reply, but the server doesn't reply.
    One thing to be looked in is that the same piece of code was execution for 5hrs.
    I have no idea of this behavior, some one please help me out ...

    Hi Pierre Forstmann,
    I am not a ORACLE DBA expert but managed to get some information,
    Error message in database alert log file.
    Alert_<DB_NAME>.log
    ORA-1654: unable to extend index SYSMAN.MGMT_SYSTEM_PERF_LOG_IDX_01 by 8 in tablespace SYSAUX
    There are no queries waiting on DBA_WAITERS or DBA_BLOCKERS.
    The application is executing PL/SQL statement (Procedure, Functions).
    Four tables are related to this process.
    Initial Count
    T1 - 0 Records
    T2 - 0 Records
    T3 - 0 Records
    T4 - 0 Records
    Count after 4-5 hrs of execution
    T1 - 38269 Records
    T2 - 654818 Records
    T3 - 992579 Records
    T4 - 4422 Records
    I have identified the session that is used by my code from V$SESSION.
    Initially when i issued the below select statement:
    SELECT status,state,wait_time,seconds_in_wait FROM V$SESSION WHERE USERNAME = 'XXX';
    STATUS;STATE;WAIT_TIME;SECONDS_IN_WAIT
    INACTIVE;WAITING;0;1377
    ACTIVE;WAITED SHORT TIME;-1;2
    ACTIVE;WAITED SHORT TIME;-1;0
    INACTIVE;WAITING;0;1
    INACTIVE;WAITING;0;1377
    INACTIVE;WAITING;0;1377
    INACTIVE;WAITING;0;1377
    INACTIVE;WAITING;0;1377
    INACTIVE;WAITING;0;4
    INACTIVE;WAITING;0;1377
    Yes, The data in V$SESSION changes over time.
    After 5 Min interval
    INACTIVE;WAITING;0;1496
    ACTIVE;WAITED SHORT TIME;-1;2
    ACTIVE;WAITED SHORT TIME;-1;5
    INACTIVE;WAITING;0;2
    INACTIVE;WAITING;0;1496
    INACTIVE;WAITING;0;1496
    INACTIVE;WAITING;0;1496
    INACTIVE;WAITING;0;1496
    INACTIVE;WAITING;0;0
    INACTIVE;WAITING;0;1496
    After 2 Min interval
    INACTIVE;WAITING;0;1452
    INACTIVE;WAITING;0;0
    INACTIVE;WAITING;0;0
    INACTIVE;WAITING;0;0
    INACTIVE;WAITING;0;1452
    INACTIVE;WAITING;0;1452
    INACTIVE;WAITING;0;1452
    INACTIVE;WAITING;0;1452
    INACTIVE;WAITING;0;5
    INACTIVE;WAITING;0;1452
    After 1 Min interval
    INACTIVE;WAITING;0;1751
    ACTIVE;WAITED KNOWN TIME;2;0
    ACTIVE;WAITED KNOWN TIME;1;1
    INACTIVE;WAITING;0;7
    INACTIVE;WAITING;0;1751
    INACTIVE;WAITING;0;1751
    INACTIVE;WAITING;0;1751
    INACTIVE;WAITING;0;1751
    INACTIVE;WAITING;0;1
    INACTIVE;WAITING;0;1751
    After 4-5 hrs of execution and when the application was waiting for the reply from the DB server i issued the same select statement.
    Result is : No rows returned.
    I would like to know what would be the reason that all the 10 session have disappeared from V$SESSION.

  • Have a Droid Razr M that is stuck in the reboot screen. I tried a hard reboot and a factory reset, and it still gets stuck in the reboot screen. How long should I wait for the reboot to occur until it starts back up?

    Have a Droid Razr M that is stuck in the reboot screen. I tried a hard reboot and a factory reset, and it still gets stuck in the reboot screen. How long should I wait for the reboot to occur until it starts back up? I tried the steps for a factory reset given on this site, but it still does not want to work. Any help would be greatly appreciated.

        Hello otter314!
    Let's take a look into this to see if we can figure out what happened. When did this begin? What's the software version of the device? Do you remember what was happening with the device right before this started? Please supply me with some additional information, I'm happy to help with a resolution!
    ChristinaB_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • Since latest Snow Leopard security patch, Quicken 2007 does nt function properly.  Quicken says it is waiting for a solution from Apple.  Does anyone have another solution?

    Since the latest Snow Lepard security download, Quicken 2007 for Mac does not function properly (it crashes and will not print).  Quicken says it is waiting for a fix from Apple.  Any idea when that might come?  Does anyone have another solution?

    http://support.apple.com/kb/DL1489
    This is the revised v1.1. You can also get it from Software Update.

  • CCP related: A timeout occured waiting for a response from the ECU

    Hello All,
                I had just started using ECU Calibration tool kit software. Iam using USB 8473 for my application.When I tried to run the VI after loading the *.A2L file, I see an error message saying "A timeout occured waiting for a response from the ECU ". Does anyone know how to communicate with the ECU through CCP.
            Iam pretty sure that Iam using the right cable. I also checked the address of the parameters using Get property.vi what iam trying to read, wether they are matching with the address in the *.A2L file or not.They are matching. However I was able to communicate with my ECU when I use the same device to read the data over J1939 data link, based on arbitration ID's, with the Vi's from CAN Frame to Channel Conversion Library.
        Can any pls help me out how to communicate with my ECU using CAN Calibration Toolkit software.
    -Lucky.

    Hello,
              I am sending you an attachment of the manual for the ECU Calibration tool kit . Please go through the manual it will clarify your doubt. Moreover , check for can vi's in the example finder in labVIEW. Those will help ....
    I am sending you a link which gives you some insight about the installation of  CCP command set and the use of the toolkit with the USB CAN hardware.
    http://digital.ni.com/softlib.nsf/websearch/D7DE248D07CAD00086256ED3004BAB8A?opendocument&node=13206...
    Drivers and Updates: ECU Measurement and Calibration Toolkit 2.1
    Attachments:
    can manual.pdf ‏1437 KB

  • Waiting for Task Completion from multiple users

    iam using Weblogic8.1 Integration BPM to design a worklist application. I need
    to create a number of Tasks(number know only at runtime), assign to users and
    wait for the completion of each of these task. I've tried using the Task Control
    factory to accomplish this. But iam not able to hold the process instance execution
    till each of these task is completed. The control gets released from the TaskControlFactory_onTaskCompleted
    as soon as one of the above created task is completed.
    Pls. let me know if there is a way to achieve this.
    Regards
    Raja V.

    Try to put the onTaskCompleted Control Receive in a loop which counts how
    many of these
    callbacks have already arrived, and the loop exit condition would be that
    the count is equal
    to the number of the created tasks.
    Regards,
    Robert Varga
    "Raja V" <[email protected]> wrote in message
    news:3f423f82$[email protected]..
    >
    iam using Weblogic8.1 Integration BPM to design a worklist application. Ineed
    to create a number of Tasks(number know only at runtime), assign to usersand
    wait for the completion of each of these task. I've tried using the TaskControl
    factory to accomplish this. But iam not able to hold the process instanceexecution
    till each of these task is completed. The control gets released from theTaskControlFactory_onTaskCompleted
    as soon as one of the above created task is completed.
    Pls. let me know if there is a way to achieve this.
    Regards
    Raja V.

  • After installing iTunes on my PC and laptop, all my songs (including paid for) have disappeared from my previous music library. How do I get them back?

    What happens to the old library? Do I have to install all my songs again?

    For general library squiffiness following an upgrade the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

Maybe you are looking for

  • How to get values/data stored in the database into a list-item.

    how to get values/data stored in the database into a list-item. i tried to make a list item without any values assigned to it...but i got the below error. FRM-30191: No list items defined for required poplist. or FRM-32082: Invalid value for given it

  • Why can't I log into my apple I'd account

    Why can't I log into my apple I'd account

  • IPhone 6 stolen from package

    I opened my Verizon package on Friday and my iPhone 6 was missing from the box!  Somewhere along the delivery chain, someone opened the package, opened the box, and took the phone out, leaving the charger!  Has anyone had this experience?  Now I have

  • Can't Install Premiere Pro

    i have instaled the creative cloud but premiere pro still not installed [Thread title changed for clarity.] Message was edited by: Jim Simon

  • How to findout in IDOC whch segment error out

    Hi All,   If an IDOC error out then how to know which IDOC segment needs to be corrected without going through all the segments. Is there any transaction or table exists to know the status of error segment. Thanks in Advance Swapna!