Waiting for a reply for Lion

Hi,
I am waiting on a reply from Apple to give me confirmation of purchase in order to avail of my free update to Lion.
Does anyone know how long this reply usually takes?
Thanks in advance,

Hard to say exactly. Look to the right column "More Like This" to see various responses from others in the same situation.

Similar Messages

Hi thanks for the reply for my airport express voltage problem

dear sir as i have a p.c window 7 and while connecting Air port express .its showing you need windows 7 SP 1 OR NEWER ,i have alredy downloded airport utility,so please advice me what step to take or what to download from net.
thanking you once again.

Hi zeg61 and welcome to Discussions,
Airport Express Lights
You might have to do a hard reset.
Airport Express Reset
When you do this reset make sure the Airport Express is in the same room near your computer ( the one you are setting the AE settings ).
Hope this helps

Thanks for the reply to my question regarding sound in iMovie and sending me the online links. however the online links are impossible to play as they upload too slowly with the result that the playing keeps stopping waiting for the content to catch up

Thanks for your reply to my question regarding sound in iMovie. However I cannot follow the links you sent as they upload too slowly and therefore the instructional movie keeps stopping waiting for the content toload. Surely theremust be a solution for this??
Thanks in advance
lolly

Please continue posting in your original thread.
With the amount of traffic on these forums it is impossible to chase around finding this.

Solaris 10 instalation in Guest Domain - Timed out waiting for TFTP reply

I have the next trouble
I have a Sun Fire T1000 and i want install two Guest LDOM's with Solaris10 in each one, I Install the LDOM Manager 1.0.3 and the service is "online" also the another services needed
First Setup the 2 Guest LDOM's in the primary Domain sucesfully .... here is a desc of the configuration.
# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 1G 0.1% 2h 14m
MAC
00:14:4f:a7:85:1e
VCPU
VID PID UTIL STRAND
0 0 0.2% 100%
1 1 0.2% 100%
2 2 0.1% 100%
3 3 0.1% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 1G
VARIABLES
diag-switch?=true
security-#badlogins=0
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
aplica_srss1@primary-vcc0 5001
aplica_prod@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:a7:85:1e bge0 switch@0
PEER MAC
vnet2@aplica_srss1 00:14:4f:fb:f4:e0
vnet1@aplica_prod 00:14:4f:fb:2c:60
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 vol1 /dev/dsk/c0t0d0s3
CLIENT VOLUME
vdisk1@aplica_prod vol1
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
aplica_prod active -t--- 5000 4 2G 15% 9m
MAC
00:14:4f:fb:2c:60
VCPU
VID PID UTIL STRAND
0 4 35% 100%
1 5 0.0% 100%
2 6 7.0% 100%
3 7 84% 100%
MEMORY
RA PA SIZE
0x8000000 0x48000000 2G
VARIABLES
auto-boot?=true
boot-device=
use-nvramrc?=true
NETWORK
NAME SERVICE DEVICE MAC
vnet1 primary-vsw0@primary network@0 00:14:4f:fb:2c:60
PEER MAC
primary-vsw0@primary 00:14:4f:a7:85:1e
vnet2@aplica_srss1 00:14:4f:fb:f4:e0
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk1 vol1@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
aplica_prod primary-vcc0@primary 5000
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
aplica_srss1 bound ----- 5001 24 13184M
MAC
00:14:4f:fb:ad:fb
VCPU
VID PID UTIL STRAND
0 8 100%
1 9 100%
2 10 100%
3 11 100%
4 12 100%
5 13 100%
6 14 100%
7 15 100%
8 16 100%
9 17 100%
10 18 100%
11 19 100%
12 20 100%
13 21 100%
14 22 100%
15 23 100%
16 24 100%
17 25 100%
18 26 100%
19 27 100%
20 28 100%
21 29 100%
22 30 100%
23 31 100%
MEMORY
RA PA SIZE
0x8000000 0xc8000000 13184M
VARIABLES
auto-boot?=true
boot-device=
NETWORK
NAME SERVICE DEVICE MAC
vnet2 primary-vsw0@primary network@0 00:14:4f:fb:f4:e0
PEER MAC
primary-vsw0@primary 00:14:4f:a7:85:1e
vnet1@aplica_prod 00:14:4f:fb:2c:60
VCONS
NAME SERVICE PORT
aplica_srss1 primary-vcc0@primary 5001
Then i mount the ISO images of The solaris OS 5/08, Later install the jumpstart server without troubles.... Here are the Configuration files needed for the properly setup of the service for a better guide

# ./add_install_client -d -e 0:14:4f:fb:2c:60 -s Zolder:/var/jump_start/ sun4v
cleaning up preexisting install client "0:14:4f:fb:2c:60"
To disable 0:14:4f:fb:2c:60 in the DHCP server,
remove the entry with Client ID 0100144FFB2C60
To enable 0100144FFB2C60 in the DHCP server, ensure that
the following Sun vendor-specific options are defined
(SinstNM, SinstIP4, SinstPTH, SrootNM, SrootIP4,
SrootPTH, and optionally SbootURI, SjumpCF and SsysidCF),
and add a macro to the server named 0100144FFB2C60,
containing the following option values:
Install server (SinstNM) : Zolder
Install server IP (SinstIP4) : 172.24.0.10
Install server path (SinstPTH) : /var/jump_start/
Root server name (SrootNM) : Zolder
Root server IP (SrootIP4) : 172.24.0.10
Root server path (SrootPTH) : /mnt/s0/Solaris_10/Tools/Boot
Boot file (BootFile) : 0100144FFB2C60
# cat /etc/inet/hosts // The Content of this file is exactly with ipnodes file
127.0.0.1 localhost
172.24.0.10 Zolder loghost
172.24.0.9 primary-vsw0
172.24.0.8 aplica_prod
172.24.0.7 aplica_srss1
# cat /etc/ethers
00:14:4f:fb:2c:60 aplica_prod
# cat /etc/bootparams
aplica_prod root=Zolder:/mnt/s0/Solaris_10/Tools/Boot install=Zolder:/var/jump_start/ boottype=:in rootopts=:rsize=8192
# cat /etc/dfs/dfstab
share -F nfs -o ro,anon=0 /var/jump_start/
share -F nfs -o ro,anon=0 /mnt/s0/Solaris_10/Tools/Boot
share -F nfs -o ro,anon=0 /mnt/s1
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
vsw0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.24.0.10 netmask fffffe00 broadcast 172.24.1.255
ether 0:14:4f:a7:85:1e
vsw0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.24.0.9 netmask fffffe00 broadcast 172.24.1.255
Here i plumb up the networks interfaces and setup the vsw0 device and change the MAC address of the vsw0 for the same of the bge0 device.
Then i Log to a Guest LDOM aplica_prod
----------START CONSOLE 1-------------------------------
# telnet localhost 5000
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "aplica_prod" in group "aplica_prod" ....
Press ~? for control options ..
----END CONSOLE 1----
At the same time i open another console for startup the Guest LDOM aplica_prod i make a snoop of the vsw0 interface
---START CONSOLE 2---
# ldm start aplica_prod
LDom aplica_prod started
-bash-3.00# snoop -d vsw0 | grep aplica_prod
Using device /dev/vsw0 (promiscuous mode)
---END CONSOLE 2-----
In the other console is produced the next exit
----START CONSOLE 1------
Sun Fire(TM) T1000, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.28.9, 2048 MB memory available, Serial #66792544.
Ethernet address 0:14:4f:fb:2c:60, Host ID: 83fb2c60.
Boot device: File and args:
ERROR: boot-read fail
Evaluating:
Can't locate boot device
{0} ok boot vnet1 install
Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: install
Requesting Internet Address for 0:14:4f:fa:82:17
Requesting Internet Address for 0:14:4f:fa:82:17
Timed out waiting for TFTP reply
---END CONSOLE 1-----
in the console 2 the snoop generates an exit of the net traffic for the vsw0 device
----START CONSOLE 2--------
primary-vsw0 -> aplica_prod RARP R 0:14:4f:fb:2c:60 is 172.24.0.8, aplica_prod
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
primary-vsw0 -> aplica_prod RARP R 0:14:4f:fb:2c:60 is 172.24.0.8, aplica_prod
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
----END CONSOLE 2----
Once start the snoop to produce messages make a ping to the IP's that should be assigned in the host file and all give a succesful answer BUT without start the Solaris 10 Instalation
# ping 172.24.0.8
172.24.0.8 is alive
# ping 172.24.0.9
172.24.0.9 is alive
# ping 172.24.0.10
172.24.0.10 is alive
I really need help with this trouble ..and any help or advice will be thrully appreciated
Thanks
PD: any other required configuration file will be provided if is needed

I am waiting for Adobe reply on open case for change of platform for Photoshop

I am waiting for adobe reply on open case 0210885939. My user # is 114057269.

Try sub-forum http://forums.adobe.com/community/photoshop

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

Oldcameraman
Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
I have answered your most recent of the duplicates
Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
am not sure can be used.
Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
ATR

This is actually in response to varjak paw's reply to my question, but I am unable to directly reply for some reason hence the separate post, but so it's open to anyone to answer

This is actually in response to varjak paw's reply to my question (thank you!), but I am unable to directly reply for some reason hence the separate post, but so it's open to anyone to answer. Anyway, my original question was
Hello, I am from a Korean institution. We are looking into enrolling in iTunes U, but are aware that our country, South Korea, is yet enrolled in the iTunes U. Can our institution still enroll and if so, what is the procedure? Or do we have to wait for our country to be enrolled in iTunes U first? We're surprised South Korea isn't listed yet among the 26 countries so far, considering how it's one of the more developed countries and also highly advanced in the technology field. Thank you!
Varjak paw's answer:
Sorry, but iTunes U is not available to institutions in South Korea at this time. It is only available to institutions in those countries on the list. Why Apple has not yet been able to provide that service in your country or when (or indeed if) they ever will is something none of us here can say.
Regards.
My follow-up question:
So then, is if there's a general standard procedure country governments have to follow in order to have the iTunes U service provided (ex. a site/online application on Apple). So in other words, if the Korean government were interested in enrolling in iTunes U, what would they have to do/what channel(s) would they have to go through? We are a government-affiliated institution so if we're provided the necessary steps, we may be able to forward the procedure along to the right government body that would be responsible for setting this up.
Any information would be appreciated, thank you!

As I said in your original post, iTunes U is not available to any institution, government or otherwise, in South Korea. If or when Apple will extend iTunes U to your country is something none of us here can say, and Apple will not until such time as they're ready to make an announcement. What Apple's criteria and requirements are for being able to open iTunes U in a given country is unknown; there is no "procedure" that any of us here can state or direct you to that you could initiate. It's totally up to Apple, and if they are working on this, I'm sure they know who in the SK government they would need to work with.
Sorry, but you will just have to wait and hope that something develops in the future.
Regards.

Can I restore the Snow Leopard version of 'Preview' for use in Mountain Lion?

When running Snow Leopard I enjoyed using Preview with my HP C7280 All-in-One Scanner/Printer. I could place several items on the glass plate and Preview would then carry out a "preview scan". The superior edge detection software contained in Preview would recognise that there was more than one item on the scanner glass and put a marquee rectangle around each object (even separate images in a magazine page). I could de-select objects if I wanted to at this point to avoid scanning them, or I could opt to scan.
Preview would then scan all selected items in one go outputting a separate file for each one. No need to re-scan and select the next object. Preview would do the lot in one go! This was fantastic for saving time for me.
Preview really 'kicked the crap' out of my PC at work. The best the scanning software on the PC could was to auto-detect a single item.* So if I have a lot to do, I have to preview scan and then save/scan each item individually to achieve the same result.
All this changed when I updated from Snow Leopard to Mountain Lion. The scanning is nothing like as effective and time saving as before. Preview just scans the whole glass plate straight to a file irrespective of what is on it, no preview scan and no object edge detection whatsoever; not even a single object like on my old PC at work. Absolute rubbish!
I really want to restore the functionality I had before. So I wonder, is it best to revert my iMac to Snow Leopard, or can I achieve this another way? I don't necessarily want to abandon Mountain Lion - but I will if I have to.
Is it possible to restore the Snow Leopard version of Preview whilst keeping Mountain Lion? Or maybe download the Lion version from somewhere instead - assuming that the Lion version still has same functionality as the Snow Leopard version?
*Even this is better than what Preview does since I updated to Mountain Lion

It's either that or finding other software for your scanning needs. For example, Image Capture comes with OS X, VueScan 9.2.09, ExactScan Pro 2.24.
Alternatively, partition your hard drive and install Snow Leopard on another volume.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive. Use the Snow Leopard installer DVD to install Snow Leopard on your new volume.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

After my windows 7 computer did automatic updates, everytime I click on a link I get a not responding message and have to wait almost a minute for the program to continue.

Last night, my computer running Windows 7 premium home edition downloaded some automatic updates. I came in this morning to find that it had done a restart after adding these updates.
Now, anytime I click a link or do something which requires a redirect to another web page, my program gives me the not responding message and I have to wait 30-55 seconds for the program to continue.
I have Firefox 4 and it was running smoothly up until this morning, so I can only assume that whatever the automatic updates were, there is something in them that is causing this error. I do not know what updates were installed.

I don't have that problem in Firefox 29 when I read Gmail or AOL (aim''.''com) webmail. When I click on a webpage link in an email I'm reading (example: http://www.tworivertheater.org/ ) the link opens in a separate Firefox tab.
Are you saying this doesn't happen in outlook''.''com webmail and the link opens in the same Firefox tab as the email itself? I don't use outlook''.''com webmail myself. Hopefully someone will be along who does, or see [[Problems with email and how to find help]].
It might help if you would confirm the type of link that is opening in the same tab as the email you are reading in your outlook webmail. If I misunderstood your problem, please explain it better.
It might also help if you could furhish more troubleshooting information. Please do the following:
*'''For Firefox 29.0 and above''': Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].

Has anyone found an app that will check programs on my computer for compatibility with osx lion?

Has anyone found an app that will check the programs on my computer running Snow Leopard for compatibility with osx lion? Thanks
Ken

No app needed, just go into your Utlities folder and click on System Information (it could go by another name). Click on Software and then Applications. Wait a minute for it to load and then check for anything that says "PowerPC" instead of Universal or Intel. PowerPC software will not work in Lion. With my 100+ apps, none of them were PowerPC.
Note: You may have to resize the System Information window to see the operating information.

System requirements for Mac OS X Lion

Hi,
Will Mac OS X Lion work on my Leopard 10.5.8, or do I need Snow Leopard 10.6.6 to upgrade to Lion?
I haven't bought Snow Leopard until now because I've been waiting for the release of Lion, and I just heard that I need Snow Leopard...
Please tell me it's not true.

Mac OS X Lion will be available in July as an upgrade to Mac OS X version 10.6 Snow Leopard from the Mac App Store for $29.99 (US). Lion will be the easiest OS X upgrade and at about 4GB, it is the size of an HD movie from the iTunes Store. Mac OS X Lion Server requires Lion and will be available in July from the Mac App Store for $49.99 (US).
Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, runing the latest version of Snow Leopard. The Lion upgrade can be installed on all your authorized personal Macs.
The Mac OS X Lion Up-To-Date upgrade is available at no additional charge via the Mac App Store to all customers who purchased a qualifying new Mac system from Apple or an Apple Authorized Reseller on or after June 6, 2011. Users must request their Up-To-Date upgrade within 30 days of purchase of their Mac computer. Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request.
http://www.apple.com/macosx/how-to-buy/

Why is it taking do long for my free mountain lion upgrade?

I don't understand why I should have to apply for an upgrade when I bought the computer within the grace period for A free upgrade .Then after submitting the application I never even got a confirmation email. The whole reason I didn't just wait to buy the MacBook pro was because I was eligible for the
Upgrade for free. If I don't receive my code today I will just return the machine and re buy a new one with mountain lion pre loaded.

Welcome to the vaunted "Apple Experience".... If all 4 million of us (and did they really sell that many things eligible for an upgrade?) showed up unannounced for a genius bar appointment at our Apple store to request our Mountain Lion upgrade redemptions, we could really get their attention.
Right now it is rumoured that Apple is outsourcing the verification of our claims to DogBert's Elbonian workers at 31 cents an hour. They get to read our personal proofs of purchase and decide if they look real or fake. But because that process would be too involved, it has been reported that the Elbonians instead print out each claim, fold it into a paper airplane, and judge the validity of the claim by how far the paper airplane flies. Because it is Dogberts Elbonian workers who are using mountains of paper in this futile exercise, Apple can deny that they are personally responsible for mowing down whole forests to print these millions of proofs.
If we all showed up at the Genius bar, Apple would instead be forced to have $8.45/hr. workers deal with our requests. And all they would be able to tell us is send a claim to Dogbert, so we wouldn't adversely impact Dogbert's workers. The Apple store blue shirts, unable to solve our problem, would at least be able to ask us how it feels to be an Apple owner, and offer consolation why trying to sell us a nano....
Let's just hope the upcoming war in Elbonia doesn't get in the way of the codes....
http://search.dilbert.com/comic/Elbonia%20Dogbert

Waiting for a refund for a device purchase on Thanksgiving 2014...

I've been waiting over 3 months for a refund on a smart watch I bought on November 28th 2014. The smart watch was discounted for the holidays so I decided to pick it up as a Christmas gift. The person I gave it to did not want the watch so I sent it back to Verizon with the supplied shipping label. The watch was received by Verizon on January 12, 2015, before the extended holiday return policy ended. Since then I have been calling every 2 weeks to check on the status of the refund and it is always the same story. The person I talk to has no idea what is going on so I have to explain the situation and give them the tracking number to confirm that they received it. They then promise me a credit to my account within a few days, which never comes. Last time I called the person said that the watch is being held in the warehouse and needs to be verified. It has been over 3 months and I still have not received my refund. This is absolutely the worst customer service I have ever received and a giant waste of my time. What do I have to do to get this refund?

We are fellow users here on these forums, you're not talking to iTunes Support or Apple.
How did you contact them, and did you get a reply from them ? You could try contacting iTunes Support again : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Waited 57 mins, talked for 3 mins, then put me bac...

Waited 57 mins, talked for 3 mins, then put me back to the queue, after 10 mins, someone picked up and said system down. WHAT IS GOING ON BT??

there is no direct number you could try live chat they may be able to help you
http://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Waiting for a reply for Lion

Similar Messages

Maybe you are looking for