Waiting for approval for unbranded phones

In the Software Update for Nokia Lumia with Windows Phone page, some phones has the status "Waiting for approval". Far as I know, carrier specific phones updates are tested/aproved by the carrier.
But, the unbranded ones: who makes the tests and approves the update? Is Nokia itself?

Both would as regards to the carriers they will test it themselves,often the maybe they skip updates,thats why sim free is the best option,or so one would think because the carriers are getting the updates first with the lumias.
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Can I close iBooks Author while I wait for approval for account to get iTunes Producer?

    I am new to the IBooks Author and I am awaiting approval, but I want to be able to close window. If I do will I be able to get back to the same area I left off when I get the confirmation?

    IBooks Author is used to create your books and needs no "registration" or approval...so yes you can closr it.
    iTunes Producer is used to upload your book to the review team and eventually into the iBooks store.
    Unless you have either a free noks account or a psid books account, you will not need to bother too much about iTunes Producer.
    Have you applied for a free book or psid book account yet?

  • Purchase requisition waiting for approval

    Hi ,
    Can you please tel me a table name where i can see a PRs waiting for approval for particular user.
    Like , when we  see PRs  in ME55 tcode for particular user. From which table we get these entries??
    Much thanks in advance.,
    Nilesh.

    EBAN you get the exact level. but thing is here you can get the rel stat as X only.
    Say examply if you have 3 rel level means, in this rel stat each level release it will get update X. If two level released XX will be there.
    Create one Z table there you will maintain the release code,user and level combination. two compare this z table and eban you can get the user list.
    directly you cannot get the its lying with which user.

  • How to have clients download a service pack to local machine but delay install until management gives approval for install.

    I am looking to update all of our office products to the latest service pack. The service packs have to be pushed out to roughly 6000 machines. I am still waiting on approval for the installation which I know is coming but
    it has to be routed through the proper channels.   What I am trying to do push  the service pack out ahead of time but not install it until I get the green light from management. Is this possible?

    Sure. two things come to mind...
    1. Create a package that contains the SP files and a bat file that would copy the SP files to a temp folder. Run that package. When you get the green light run a second package that has no source files, it simply runs the install command from the prestaged
    location.
    2. Using software updates... This will be a bit more tricky because users may see notifications about the update. Just be careful to hide those. Updates begin downloading at the avaiable time.
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • Approval for advances

    Hi all,
    In the Approval of Trips screen (PRAP), for those trips with advances which needs approval, the advances amount is not shown. I know that I can see the advance amount in PR05 and also approve the trip but I need a screen which allows me to approve all the trips for all employees with their advances amount shown on one screen. I am not using ESS or the portal.
    Any one has solutions for this?
    Thanks a lot.
    Regards,
    Eric

    > Hi,
    >
    > I am new to Travel Management (ERP2004). Can anyone
    > enlighten me :
    > 1. Is it true that in order to implement the eService
    > "Create Travel Plan", one must also implement the
    > eService "Create Travel Request" as a pre-requisite
    > ?
    > 2. For "Create Travel Request", can a more specific
    > desciption be attached to the advances rather than
    > the serial number 001, 002 etc (when requesting for
    > approval for advances) ?
    > 3. Are there further validations (via user exits,
    > badis etc) available to further enhance the
    > functionality of the eServices ?
    >
    > Thank you.
    >
    > Regards
    > Kir Chern
    Hi,
    1. yrs it s right for e service you hav to configure e service.
    2.it based on requirement you can or canot enter advances
    it depend businesss requirement.
    Vicky

  • Pending for Approval Appraisals

    Hi,
    Is there anyway to cancle the process of an appraisl that is "Pending for Approval"?
    I've tried to cancle the workflow from the sysadmin, although its status is canceled i still can see the appraisal pending for approval in the Appraisals In Progress section.
    Any advice?
    Thanks

    As my understanding,
    Employee has submitted these appraisals and they are pending for approval for respective Managers.
    If this is case, Two Possible solution could be there
    1. Manager can revert back to Employee
    2. Using API you can update to APPRAISAL record to "Pending with Employee". This change will effect in PER_APPRAISALS tables.
    Respective Notification you can close them from wf_notification Table.
    Thanks.

  • Upload leave request for approval

    Hi,
    I would like to know how to upload leave request for approval. I understand that i can use IT2001 for leave history. Can i do an LSMW for leave request for approval for 100 personnels? Thank you

    Hi,
    Data stored in IT2001 are not for ESS approval. ESS leave request data is stored in a host of tables which start with PTREQ. You can do PTREQ* lookup in SE11 and findout. There might be 3 or 4 tables which you need to look into.
    PTREQ_HEADER
    PTREQ_ATTABSDATA
    and maybe one more table.
    Then you can do a LSMW.
    Regards
    Srini
    Edited by: Sinivasan Rajamani on Apr 20, 2010 6:10 AM
    Edited by: Sinivasan Rajamani on Apr 20, 2010 6:13 AM

  • Approval for 100% discount in sales invoice

    Dear Experts,
    Please Help me with the query for Approval for 100% discount in sales invoices

    Hi Anil,
    If it is Header level discount,You manage in  standard SAP B1
    Administration > Approval procedure > Approval templates.> terms > When the following applies > Choose > Discount % > Ratio> Greater than or Equal to 100
    If it is line level discount case , you can use below query
    Select Distinct 'True' Where Cast($[$38.15.0] as decimal)>=100

  • Waiting for approval from other device on mac

    Im waiting for the macs keychain access to send approval to one of my other devices for approval after a fresh installation of mavericks 10.9.3,
    my question is how long should it take because its been 3 hours so far.
    it doesnt appear to be working for me

    Hello pj o\'connell,
    Thanks for using Apple Support Communities.
    Please see below for instructions on troubleshooting this issue of not receiving the verification code:
    I'm not receiving the verification code via SMS.
    Make sure that you have a good cellular network connection on your phone.
    Check that your phone number is one that can receive SMS messages. You can do this by having someone send you a text message.
    Check that you have the correct phone number associated with your account:
    Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
    Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.
    Check Apple System Status to see if there is currently a service outage affecting iCloud Keychain.
    If you do not have access to a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity for help completing iCloud Keychain setup.
    iCloud: Troubleshooting iCloud Keychain
    http://support.apple.com/kb/TS4644
    Take care,
    Alex H.

  • New iphone. someone else put in their username and password. time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ?

    new iphone. (someone else put in their username and password. so i had lots of apps that i had to eliminate but do NOT wish to compromise the contact list) time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ? then, how do i backup contacts and proceed before updating iphone?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes or iPhone forums.
    Regards.

  • I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

    I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?

    Hi RadarCat16,
    Welcome to the Apple Support Communities!
    I know it can be frustrating when you are waiting for content to download to your iPhone from the iTunes Store. There are a few steps I would recommend in this situation. Please read over and follow the steps in the attached article.
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/HT1725
    If your download was interrupted using your iPhone, iPad, or iPod touch
    From the Home screen, tap the iTunes app.
    For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password if prompted.
    Tap the blue download arrow to resume.
    If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
    Have a great day,
    Joe

  • " Waiting for approval " until when !????

    Hi
     i have a nokia N8 with the following product code 059D1M2 im always checking for the update realase , now its been a month evryday i check the updates availability i find " Waiting for approval"  is nokia joking on us or  what !!?

    It means that it's waiting for approval from your operator and it has nothing to do with Nokia.
    You could call your operator and ask about this approval, someone in technical service may know that how long it takes to approve the newest firmware. (For some reason, every operator has to approve the firmware updates and only after that their clients can do the update)

  • Header status say "waiting for approval".

    Hello Team,
    We have contract with 10 line items. All line items are approved. ie the status say approval finished.
    However in the header status say "waiting for approval".
    We have approval at header level.
    System details we have SRM 7.01 ie Ehp 1.
    Thanks in advance.
    With Regards
    Divakar V

    Hi,
    Check in IMG >>>> "Check Event Type Linkage" check whether "linkage enabled" got unchecked or not.
    Ganapathi

  • Waiting for Approval - RFx Question

    Hi Experts,
    We are in Esourcing 7.0. My Client has a requirement to add spend category group as approver for RFx before it go to next phase 'Open for Review'.
    I modified the document security template for RFx and provided the group information.
    Added them as Colloboraters - Role (Approver)
    When I changed the phase to 'Waiting for approval'. I dont see any approval item in the workbench (My Workflow Activities)...
    But when I click on the link(that I received in email as colloborator) , I can view a button 'Approve RFx'.
    Is there something I am missing?
    Will 'My Workflow Activities' only shows that are routed through XPDL  (Project and Contract Document)?
    Thanks,

    Rfx approval is not supported by workflow.  It is a separate process.  As you stated Projects, Contract Documents, UserDefined objects and recently Vendors are supported workflow documents.  The way you can tell is objects that have configurable phase definitions also have the ability to add workflow. These will show up in the workflow activities report.

  • Approval for a free phon

    I just received approval for a free phone but as I got to the end thanks ask for credit card I don't have one so what is my next option
    [Edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]

    Hi 
    Thank you for posting and thank you for choosing AT&T! We'll be happy to help you with that! Sounds like you're getting an AT&T Next plan, in which case there is $0 down payment to get a phone but there might be a sales tax that needs to payed up front. If this is the case, you can always stop by one of out corporate store to get the phone and service you want. You can also send us a private message and our team will help with whatever we can! Please send us a private message by clicking here. Please include your full name, phone number, account number and the best time you can be reached.
    Please let me know if you have any questions.
    Thank you,
    Dmitriy

Maybe you are looking for