Waiting for communication service

dear all,
when i execute directly the setting for information broadcasting a mail is being sent but when i schedule the same setting in transaction SOST it is showing warning 'waiting for communication service' message no SO672.
how to remove that.
any settings for that to be done.
plz help
ajay

Hi ajay chauhan,
I´m faccing with the same error even I send to an external email address or an internal email address. How can you solve that error... can you remember?!
Best regards,
João Dimas - Portugal

Similar Messages

Timed out waiting for ccmexec service to be fully operational

We are deploying Windows 7 in an SCCM 2007 R3 SP2 environment. Some of the clients we target fail the task sequence with the error, "Timed out waiting for ccmexec service to be fully operational". Below is the relevant part of the SMSTS.LOG
file:
Succeeded loading resource DLL 'C:\Windows\system32\CCM\1033\TSRES.DLL'
Failed to create an instance of COM progress UI object. Error code 0x80040154
Timed out waiting for ccmexec service to be fully operational
0, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\utils.cpp,4192)
Failed to wait for Ccmexec service to be fully operational (0x80004005)
I have seen several posts with this error that say to create the "ConfigMgr Remote Control Users" group.
Here is an example. We have created this group locally AND on the domain, but we still see this failure on about 10% of clients that we target. Any other ideas what might be creating this issue?
Thanks,
FP

After a restart in the task sequence (not the same restart every time) the ccmexec process doesn´t seem to want to start again. The problem is intermittent and does not occure on every installation, though quite frequently.
In the smsts.log you get "waiting for the ccmexec process to start" and "Waiting for CcmExec service to be fully operational", eventually it times out and the installation fails. If we start a command prompt and start the service manually
the installation continues though.
The strange thing is, this only seems to happen on a specific computer model. We have tried updating BIOS and drivers to the latest version, but no success.
Last lines of smsts.log
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
End TS policy compilation TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Get Install Directory for SMS Client TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 437 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:GAV successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:GAV") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:GAV successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 34 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Total RequestedConfig policy instance(s) : 480
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Policy evaluation initiated TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_RebootSettings.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_RebootSettings.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Policy verification done TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Config policies compiled successfully TSManager
2014-09-15 09:53:19 2244 (0x08C4)
_SMSTSReturnToGINA variable set to true TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Waiting for CcmExec service to be fully operational
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Succeeded loading resource DLL 'C:\Windows\CCM\1033\TSRES.DLL'
TSManager 2014-09-15 09:53:20
2244 (0x08C4)
Launching command shell. OSDSetupHook
2014-09-15 09:54:28 2212 (0x08A4)
Windows station: WinSta0 OSDSetupHook
2014-09-15 09:54:28 2212 (0x08A4)
Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
2014-09-15 09:54:28 2212 (0x08A4)
executing command: C:\Windows\system32\cmd.exe /k
OSDSetupHook 2014-09-15 09:54:28
2212 (0x08A4)
executed command: C:\Windows\system32\cmd.exe /k
OSDSetupHook 2014-09-15 09:54:28
2212 (0x08A4)
Also some errors in the ccmexec.log, if they have anything to do with it:
Messaging::Initialize(), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\messaging\ccmexec\init.cpp,951)
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Error initializing messaging subsystem (0x80080005).
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Released system busy flag after ccmexec initialization.
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Phase 1 initialization failed (0x80080005).
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
*** System is now free to go to sleep CcmExec
2014-09-15 09:54:04 2376 (0x0948)
Init_Phase1(), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\messaging\ccmexec\entrypoint.cpp,2528)
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Phase 1 initialization failed (0x80080005).
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
pTask->Execute(pService, pState, ulFlags), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\ccmtask\taskexec.cpp,108)
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
ExecuteTask() failed with HR = 0x80080005 CcmExec
2014-09-15 09:54:04 2380 (0x094C)
SERVICE_CONTROL_POWEREVENT(Event=PBT_POWERSETTINGCHANGE)
CCMEXEC 2014-09-15 09:55:48
1900 (0x076C)
SystemTaskProcessor::QueueEvent(PowerChanged, 0)
CCMEXEC 2014-09-15 09:55:48
1900 (0x076C)
SystemTaskProcessor::QueueEvent(PowerChangedEx, 0)
CCMEXEC 2014-09-15 09:55:48
1900 (0x076C)
//Fredrik

I can't go further "waiting for Printer Services" on Mac OS X 10.3 can U?

Evening, I'm a new user, and ocassionally use my iBook.I turned it on but it takes ONE HOUR to get to the prompt Waiting for Printing Services. I was advised to re boot but no success, I guess this all happened after i tried to update latest version.
I appreciate if you can help!!!

I am working on a friend's Ibook, I am a PC IT, and know very little about Mac's so please bare with me in helping (1st grade Mac user).
In my Mac fixing journey, I have used:
1. Repair Disk = no repairs found to fix
2. Repair Permissions = stalls and gives a prompt disconnected quit and restart, did that same prompt
3. Booted in safe mode, gets to the same point "waiting for Printing Services" and then fades out and shuts itself down after a long period.
4. I have tried to holding down opt, apple, p & r keys to reset "pram" = no go.
5. Removed the power source and batter to reset computer.
6. Booted computer connected into the printer and not connected to the computer. Same freeze place.
After all this being done,and reading alot in here, I purchased disk warrior, it corrected a few errors, rebuilt and rebooted...only to come back to "waiting for Printing Services" and then freeze.
Anyone have anything else they can help me with, that might get me passed this problem??
Thanks in Advance for any advice!!
Sav
Ibook G4 Mac OS X (10.0.x)

Apple TV 2 Waiting for network services, unable to sign in to iTunes store

Received my Apple TV yesterday.
It is connected to my network (I have tried wired and wireless).
I can view movie previews and Podcasts.
I cannot sign in to the iTunes Store (therefore cant rent movies), cannot view Youtube videos (No content available), cannot use Netflix (Waiting for network services when I try).
I spoke to Apple support, they couldn't help. They say the problem is with my network or my ISP.
I have a Linksys WRT160N router, on which I have tried disabling the firewall.
My ISP is Telus, I am on their Fibre Optic network in BC. I wonder if Telus are blocking Apple TV?
Anyone else experiencing this?
Message was edited by: gbcecanada
Message was edited by: gbcecanada

I received my Apple TV yesterday.
I am running cable internet with 10Mbps constant.
So I connected it up and proceeded to issue after issue. I could not log into my Apple account. It was stating that my name or password was incorrect.
When I would start the unit it would stay at the waiting for network connections screen for several minutes!
I did all the tricks of turning the apple of and back on, NO FIX.
I tried to update the software, and I recieved a message that stated I have the most updated software, so....NO FIX
I did a full restore. The Apple TV downloaded the newest software and rebooted after about 7 minutes, NO FIX
I logged into my router and opened all ports, added ports 80 and 123, NO FIX
I also disabled my entire firewall on my router and turned off the WEP security feature...and what would you guess.....NO F I X!!
So I logged back into my router and reset all my original settings...still NO FIX.
SO here is the good part...Apparently the system has to connect to time.apple.com and get updated...it's sort of like a verification of the system.
So after it updated everything worked great! No unable to sign into my account. NO waiting on network connections anymore.
So the biggest advice I can give, especially after my 3 hours of gradually wasting my time until I almost threw the unit out my bedroom window, is connect it to your WIFI system and let it sit by itself for a few hours and let it connect to the Apple server.
Hope this helps everyone that, at some point, has shared my pain and frustration.

Timeout in waiting for IPS service to start. Component: IPS

Hello
I have an sa 520 and in logs i see the message
<Timeout in waiting for IPS service to start.
Component: IPS>
i am sure that ips failed to start because although i have enabled ips in lan with
Signature File SBIPS000019 i do not see any logs for ips events
firmware version = 2.2.0.7
the above happened after a facory reset and configuration from scratch

Well the problem is now resolved. It was either faulty tapes (about 12 of) or two tape drives with faulty heads. We had the heads replaced in one of the drives and tested it with a new tape, it works perfectly again.
MC

Startup hangs at "Waiting for Internet Services"

I have a Quicksilver 800 and after a power outage when I tried to restart my Mac the startup hangs at "Waiting for Internet Services" and will not get to the login window. I ran a disk repair, permissions repair, and ran Disk Warrior with no luck. I'd appreciate any help you can give.

William, welcome to Apple Discussions.
Will it boot from your system CD?
Is the Startup Disk set to start from your HD or a Network?
Many times after a power failure, the Mac won't startup & you have to do a PMU reset. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
 Cheers, Tom

Waiting for network services...

My ATV2 is online, it connected to my network, and all the movie thumbnails and such are displayed. It won't connect to the iTunes store, says that the Apple ID or password aren't recognized. Gets stuck on "Waiting for network services..." on Netflix. When attempting a restore downloads "the latest update" and looks like it's doing what it should but then displays "The update was not successful." Resets don't help, as it gets stuck on the "Waiting for network services..." Anyone having similar problems?

I had the same problem. I just wanted to stream content from Netflix for starters, no bothering with iTunes on a PC, but the aTV2 would be stuck "Waiting for network services". Checking my settings and my router reflected a good WiFi connection, DHCP address assigned, etc. Internet radio worked fine, as did photo screen saver from FlickR.
Attempting to log in to iTunes gave an incorrect password error -- a lamentably bad error since the password was correct.
No joy on Netflix login.
No joy on YouTube. Which is puzzling since port 80 is open. (I wonder if the aTV2 is calling home to Apple even if you are just using Netflix or YouTube.)
All of this is a major annoyance as you have to keep entering your accounts and passwords from scratch over and over with the silly remote control and alphanumeric entry control.
I suspected AppleTV was trying to connect to its services on the internet on some ports my router firewall was blocking, but there is no discoverable, comprehensive, or accurate Apple documentation to indicate what ports those are. I tried opening TCP:3689 with no improvement.
As a last try, I opened every outbound port for the aTV2. (That is not going to be acceptable in the long term. We run a tight network security ship here.) It still didn't work. "Waiting for network services...". Hmph! I powered cycled the aTV2. After it rebooted, it works fine with Netflix and Youtube. No "Waiting..."
It is lamentable that aTV2 setup and/or network test doesn't report what ports it is failing to connect on. Bad bad OOBE Apple! XBOX 360 for example gives much more useful network config assistance.

SCCM 2012 - Waiting for a Service Window

I'm trying to send a package to a bunch of computers but everything shows as "In Progress" because they're "waiting for a service window". The thing is, it's a Sunday morning, all the clients are configured with normal work hours, there are no maintenance
windows configured on any collection. What am I missing?

Here is what I get, I'm confused.
<![LOG[No Service Windows exist for this type. Will check if the program can run in the All Programs window...]LOG]!><time="01:12:35.553+240" date="11-04-2012" component="ServiceWindowManager" context="" type="1" thread="1032" file="servicewindowhandler.cpp:1517">
<![LOG[ Biggest Active Service Window has ID = {3D1F8888-E30E-4122-B0C2-4FF6898A2175} having Starttime=11/03/12 18:00:00]LOG]!><time="01:12:35.553+240" date="11-04-2012" component="ServiceWindowManager" context=""
type="1" thread="1032" file="servicewindowhandler.cpp:1336">

"Waiting for network services..." forever! Then, wont' accept WEP password!

Anyone having this issue. One of my two new Apple TV 2s is doing this...was working fine for weeks and then bang!

I had the same problem. I just wanted to stream content from Netflix for starters, no bothering with iTunes on a PC, but the aTV2 would be stuck "Waiting for network services". Checking my settings and my router reflected a good WiFi connection, DHCP address assigned, etc. Internet radio worked fine, as did photo screen saver from FlickR.
Attempting to log in to iTunes gave an incorrect password error -- a lamentably bad error since the password was correct.
No joy on Netflix login.
No joy on YouTube. Which is puzzling since port 80 is open. (I wonder if the aTV2 is calling home to Apple even if you are just using Netflix or YouTube.)
All of this is a major annoyance as you have to keep entering your accounts and passwords from scratch over and over with the silly remote control and alphanumeric entry control.
I suspected AppleTV was trying to connect to its services on the internet on some ports my router firewall was blocking, but there is no discoverable, comprehensive, or accurate Apple documentation to indicate what ports those are. I tried opening TCP:3689 with no improvement.
As a last try, I opened every outbound port for the aTV2. (That is not going to be acceptable in the long term. We run a tight network security ship here.) It still didn't work. "Waiting for network services...". Hmph! I powered cycled the aTV2. After it rebooted, it works fine with Netflix and Youtube. No "Waiting..."
It is lamentable that aTV2 setup and/or network test doesn't report what ports it is failing to connect on. Bad bad OOBE Apple! XBOX 360 for example gives much more useful network config assistance.

I can't go further "waiting for Printing Services" after turning on.

I have tried to reboot but it comes to the same point, The logo and spining daisy are there for 5 min. then I see the Blue bar with prompts growing at times(it takes 10 - 15 min. when it reaches "waiting for Prionting Services" stays there forever, I guess this all started when I tried to instal new updates (with no success)How can I revert the installation? or how can I get to the loging screen?
what shall I do?PLEASE HELP!!!!!

I am working on a friend's Ibook, I am a PC IT, and know very little about Mac's so please bare with me in helping (1st grade Mac user).
In my Mac fixing journey, I have used:
1. Repair Disk = no repairs found to fix
2. Repair Permissions = stalls and gives a prompt disconnected quit and restart, did that same prompt
3. Booted in safe mode, gets to the same point "waiting for Printing Services" and then fades out and shuts itself down after a long period.
4. I have tried to holding down opt, apple, p & r keys to reset "pram" = no go.
5. Removed the power source and batter to reset computer.
6. Booted computer connected into the printer and not connected to the computer. Same freeze place.
After all this being done,and reading alot in here, I purchased disk warrior, it corrected a few errors, rebuilt and rebooted...only to come back to "waiting for Printing Services" and then freeze.
Anyone have anything else they can help me with, that might get me passed this problem??
Thanks in Advance for any advice!!
Sav
Ibook G4 Mac OS X (10.0.x)

How to generate a WSDL for communication service

Hi,
I'm integrating my OSB with the OCSG. For that I've got to create a WSDL file as per my exposed OSB service. On tryin manually I'm getting errors. Then I tried to create it through a Java class as given http://www.vorpal.net/xwiki/bin/view/Boot%20Camp/Extending%20Services%20Gatekeeper.
In this link they have given the steps for generating the custom WSDL I tried this example but no success. Can you please help me with this? Has anyone created the wsdl using the above link?
- Praveen

Yeah sure!!
Overall picture: I wish to expose my OSB services to the third parties using OCSG. For that I've created the Communication services corresponding to each OSB service.
Problem: Integration with the OSB.
At the OSB side I've got JMS queues which interacts with other existing systems in my SOA enviornment. But I'm not getting how to get the OCSG application- triggered request messages in that queue? Please help.
Also I've read about the SOA facades for integration with OSB.Which of the two approaches you will suggest?

Waiting for Customer Service Answer for 3-4 months

We have been a loyal customer of Comcast for over 10 years, and we are very disappointed with your level of customer service over the last 3-4 months. On around April 16th I contacted Comcast to move my account to a new address. When I first called the agent told me that the move would not be possible and I would have to call back the next day to see if they had a different answer. So, I called back and now they were able to offer service at the new address. I thought this would be a straight forward transfer but it was not. The technician was booked for April 19 in the evening which was fine. We had decided to down grade our service to just the internet and the agent (Andrio) offered us a great deal which we agreed too – this was Performance Internet at $44.99 per month (we have yet to receive a bill with the correct amount, we agreed to this amount). The technician arrived on time, but he didn’t seem to have any knowledge of what he needed to do. Firstly the technician cut through the AT&T line to the house and left it hanging in our garden, explaining that he doesn’t carry that wire so he couldn’t repair it but someone would arrange that to be done and I would receive a phone call about it (he thought he’d cut through the Comcast line). We didn’t receive a phone call, I called Comcast a number of times until another 2 technician’s came to my property – they looked at the wire, told me they couldn’t repair it and someone else would be in touch. No one has been in touch – I am still waiting for it to be repaired, I do not have an account with AT&T and this is Comcast’s error to fix. My husband then spent the next 3-4 hours showing the technician how to test the lines to get the internet and TV working. Eventually the internet worked. I could go on about the number of times I’ve called Comcast about my bill and the AT&T line, being given a number of escalation tickets which I have never heard anything from. I would like to have my issues resolved as soon as possible. Please advice as soon as possible what Comcast will do about the following: Address the issue with my bill – the monthly charge agreed was $44.99 (we have a budget and currently we cannot afford what you are charging us)Address the reconnection of our AT&T line to our property, Comcast needs to organize this as we do not have an account (we will not arrange this and then be reimbursed we simply do not have the money to do so) Having been a Comcast customer for over 10 years with no issues before we moved properties, I am very upset with the level of customer service we have received. To resolve the problem, I would appreciate your immediate action, we would like our account to be credited for the over payment on the monthly charge and our AT&T line fixed. I look forward to your reply and a resolution to my problem and will wait until July 6, 2015 before seeking help from a consumer protection agency or the Better Business Bureau. Please contact me as soon as possible. Sincerely,

@DylnClarke
I am sorry for your troubles. I have sent you a private message to assist you further.

Is anyone else on hold for HOURS waiting for customer service?

>> Duplicate post removed to comply with Verizon Wireless Terms of Service. See I've been on hold waiting for the fraud dept for 86 minutes now! <<
Message was edited by: Verizon Moderator

Call Apple Customer Relations - 1800-767-2775
WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER AND/OR CASE NUMBER ON THESE MESSAGE BOARDS.

The status/location indicator bar (says waiting for, communicating with, etc) across the bottom is gone, how can I get it back?

I can't find out where the line that tells what Firefox is currently doing has gone to. It usually says things like, "waiting for response from", "loading", "done". I rely on that status bar a lot and I have no idea what it is called, or where it went. Can anyone help?

Where are the answers???? Why hide them? This is very annoying!!!

Waiting for the service MSExchangeMailboxAssistants to reach status Running

I have to say that the installation of Exchange Server 2013 SP1 has been an emotional experience so far. I have encountered and fixed approximately 20 errors so far and can still not complete the installation. Errors have ranged from adding a registry
key for "Pickup" to toggling IPv6 settings etc. The errors haven't been too bad up to now as they're clearly stated in both the setup log and event viewer. A quick Google search usually gives a few solutions to try and eventually fix
the problem.
My recent error has been difficult to find a solution to as the setup log simply says it cannot start the "MSExchangeMailboxAssistants" service. I have tried to start the service manually but the event log doesn't show any messages relating
to the stopping of the service.
Error:
Service 'MSExchangeMailboxAssistants' failed to reach status 'Running' on this server.
Platform:
Windows Server 2012 R2
Exchange Server 2013 SP1
Things I've tried:
Starting all Exchange services. All are working fine.
Started MSExchangeMailboxAssistants. Stopped immediately without an errors in event log.
Started MSExchangeMailboxAssistants.exe from command prompt. Wouldn't start as it's a service.
Used cmdlet to increase logging level to "high" and "expert" for all 'MSExchangeMailboxAssistants' services. Started service again and nothing logged.
Installed Operations Manager. Nothing logged.
Manually removed Exchange from server several times and reinstalled. Cleaned out AD, registry, files, IIS etc. No change, same error.
Try installing with and without Malware Protection.
Checked IPv6 is enabled on all NICs.
Checked registry settings for quotes around file name. It does contain the quotes so nothing to fix.
Checked Exchange 2013 SP1 is compatible with Windows Server 2012 R2. The original version wasn't but SP1 is.
I'm all out of ideas now and no error message in the logs to google.
Any help would be appreciated.

Thank you for your reply Exchange Shelly, I really appreciate your help.
Unfortunately, "MSExchangeTransport" failing to start was one of the many issues that I encountered during the installation of Exchange 2013 SP1 on Windows 2012 R2. I had already visited the website mentioned above (which was very helpful) and
the registry key is already in place.
I did double check the registry after reading your reply just in case and can confirm it's definitely there.
If I could get an error message when the MSExchangeMailboxAssistants service fails to start, I would have a fighting chance. I've tried increasing the logging level using the cmdlet and the registry but still not seeing anything in the Event Log.

Waiting for communication service

Similar Messages

Maybe you are looking for