"WAITING FOR DEVICE" problem for Map Loader 2.0.2

i'm sure many have had that problem, but doing a search on topics doesn't seem to produce an answer. if you have resolved that issue please post again your solution here
Thanks
Solved!
Go to Solution.

Open Nokia Map application, go online whether through through your wireless network if your phone is equipped with or through your ordinary 3G or paid internet connection, downloading of very small amount of Data as about 300 KB is enough to "stamp" your memory card with identification file called QF file then the the solution is simply the following:
If your phone is hacked or you are able to access the following on your memory card:
(Memory Card drive):\private\20001f63\diskcache
copy the file named QF from the above folder and install it on the root of your memory drive.
The excute Map loader (doesn't make difference whether PC suite or Data transfer) it will be identified and then you can download whatever Map you want.

Similar Messages

HP LaserJet 5200 - Yet another "GenericClass: waiting for device" problem

I have an HP LaserJet 5200 that worked until today. I have changed nothing and replaced nothing and now I'm getting the ol' "GenericClass: waiting for device." It worked when I first went to 10.5.4, so that's not the issue. The connection obviously works because the computer recognizes the printer. I've deleted and reinstalled everything under the sun related to printing to no avail.
Any ideas? I'm hoping I don't have a $2000 paper weight.
Thanks in advance
Message was edited by: Wesley Johnson

Several Leopard users are reporting that HP printers no longer work with USB-parallel adapter cables. I don't know why.
The best solution is to put the printer on the network, either by buying the jetdirect card that fits that model (on eBay), or by buying a used parallel port print server.

Specific code for device- kernel mem mapping

I would like to see an example of device memory to kernel memory mapping code.
Yes, there is a section in WDD about memory mapping, but it is geared towards device<->USER-memory mapping.
or kernel<-> user-memory mapping.
Could someone please point me towards a specific example of doing device<->kernelspace memory mapping?

I would like to see an example of device memory to
kernel memory mapping code.[CUT]
Could someone please point me towards a specific
example of doing device<->kernelspace memory
mapping?look at the ddi_regs_map_setup(9F) man page. Devices have register
blocks. Assuming this is a PCI card, the pci config registers will be
rnumber=0, device specific registers are usually rnumber=1,
and some device have more after that (i.e. if they have on board memory,
it could be mapped in rnumber=1 or rnumber=2 or even have
a way to access it through config space.
MRJ

Problem with Map Loader 3.0.28.0 and 5800XM

Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!

Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world!

Save for web problem for transparent gaphics

hi!
savng any transparent graphic in " save for web&.." the transparancy of original file is shown much more opaque/darker and so it will save in png file.
iattached file where you can see red box with 40% opaciy , but when opened in save for web it looks more like 60% opacity.
i found solutions of some problems for color shifting in save for web , but none of them solves my problem.
Any ideas?

All is not as hopeless as it seems just a bit hidden in CS 3 and earlier in CS 4 the mystry was brought to the frnt though not really document as far as I know.
The problem is simple to correct and has a logical reason why it is manifesting itself this way.
In CS 3's Save for Device and Web there is a small triangle at the top left had corner on the image display window that offers you a choice between the default and the problem uncompressed color, Macintosh color, Windows color and Document Color Profile which is what you are looking for since that is what you expect to match.
There is also the option to convert to sRGB which what the web basically displays well. Which is located on the upper right corner of the dialog also a drop down.
I hope this helps you find your way it used to drive me a bit crazy myself till I took a really close look at the dialog.

Looking for device drivers for HP Pavilion 23-b012 all in one pc

where do I find device drivers for my pavilion 23 for windows 7 32bit.

Hi:
Your PC is not supported by HP for Windows 7 and Windows 7 32 bit will be particularly harder to find drivers for since OEMs have moved on to furnishing 64 bit operating systems on their PC's.
I can't get to the support pages to find out what model wireless network card your PC has, but here are the links to some of the drivers you need.
1. Install the AMD chipset drivers and reboot. These should install the smbus and usb 3 controllers.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2032
2. Install the AMD graphics driver and reboot.
http://support.amd.com/en-us/download/desktop?os=Windows%207%20-%2032
3. Install the audio driver and reboot. Accept the agreement. DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
4. Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
5. Card reader: DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
If you know what model wireless card that PC has, let me know and I will find the W7 32 bit driver for it.

N82 problems wih map loader.

I'm trying to use the map loader on an N82. I connect the USB, select "Data transfer" on the phone, and then on the PC run the map loader.
At this point I get "No storage medium detected" error message, and the phone flashes "Unable to activate data transfer mode. Data card is in use by another application".
I've exited the media player, and can't think of what else could be using the card (yes, there is a card plugged in).
Anyone else experience this? I had no such hassle with an N73 (lots of other hassle, but not specifically this one)

Is this the link you used?
http://europe.nokia.com/A4984199
I just tried it and it's fine.

Slution for Bettry problem for Z10

Dear Sir
one week berfore i tried to restart my z10, that time my phone didn;t restart stuck with blackberry logo, after that i did factry setting reload ia blackberry link
after that my phone work normaly but bettery when reach 30% its automatcally switched off without indimation
i loss my phone memory also
please kindly send me the currect soluction for my better bak and how recover my old memory
Thanks and Regards
Jayaram

What is happening is that your on-device battery meter is off-sync with the actual battery charge.
Connect to your OEM wall outlet battery charger and while still connected and powered on, remove the battery a minute to reboot. After reboot leave to fully charge to 100%.
Thus will reset the false charge reading. You may need to do perform this procedure 2-3 times.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Map Loader not seeing device :(

installed Nokia map loader v2.0.2, i got my N95 connected via USB and on PC suite mode, but i get the "waiting for device" message in map loader, also in bottom left corner it says "no drive selected". Tried it with Maps running, same result, i've got like 300Mb free space on card, but i doubt thats the issue. Help please
Message Edited by homz on 12-Oct-2008 09:50 PM
Solved!
Go to Solution.

http://img88.imageshack.us/img88/9703/mloadye7.jpg
http://img300.imageshack.us/img300/7402/dirmv2.jpg
reinstalled Maps, reinstalled Map Loader, removed card, restarted phone, still nothing...i just cant find any logical explanation
EDIT: i've got XP sp3
Message Edited by homz on 12-Oct-2008 10:30 PM

For last one month I am facing problem in watching online videos on my iPod touch. It is opening or can say loading the online videos. Earlier it used to be work absolutely fine. Any solution for my problem.

For last one month I am facing problem in watching online videos on my iPod touch. It is opening or can say loading the online videos. Earlier it used to be work absolutely fine. Any solution for my problem.

For last one month I am facing problem in watching online videos on my iPod touch. It is not opening or can say loading the online videos. Earlier it used to be work absolutely fine. Any solution for my problem.

Imessage/facetime waiting for activation problem on a deactivated iphone 5

Hello people(:
I was just wondering if anyone out there know how to fix the waiting for activation problem for iPhone 5 on 6.1.4
My iPhone 5 is deactivated so it has no service on it. It has a sim card but the sim card doesn't have service and I'm guessing thats the problem.
But i just wanna make sure that it is or if anyones got a solution.
Thanks(:
Need answers please

Well I did a restore of my iPhone 5 (deactivated) using my last iPhone 6 backup (activated) and iMessage still failed to activate. It's funny because this worked on my old iPhone 4. I don't know what else I did different.
Does anyone know why Apple does this? Why are they against us using iMessage on a deactivated iPhone?

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Cp 8.0.1,What difference between "Publish for Devices" and "Publish for Devices (App) ?

i think "Publish for Devices" and "Publish for Devices (App). it same.
"Publish for Devices (App)" for easy connect phonegap.
"Publish for Devices" for advance user.
not sure you understand but i only share.

Publish for Devices (App) is to publish your captivate project as a native application using PhoneGap API.
Publish for Devices is the normal html publish but for Responsive project. It will publish your project as html content and later you can upload it on some LMS or WebServer to view the content on devices using Browser. It has not nothing to do about advance users.
In both the cases the content will change according to the size of the viewing device.

Device packages for LMS 3.2

Hello,
Can someone point me in the right direction to download device packages for LMS 3.2 for Solaris.
Thanks,
Tim
GSP

Hi Tim
Are you referring for device packages for RME ? If so which version of RME do you have ? You can downlaod device packages from CCO using this URL:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=4.3.1&mdfid=282635175&sftType=CiscoWorks+Resource+Manager+Essentials+Device+Package+Updates&optPlat=&nodecount=2&edesignator=null&modelName=CiscoWorks+Resource+Manager+Essentials+4.3&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y
Hope this helps.. All the best..
Raj

Map Loader - Waiting for phone (forever)

HI,
I have been trying to load maps into my N900 using the Map Loader. The N900 was connected to my Windows 7 laptop using Mass Storage mode.
Fire off Map Loader and then it got stuck at "waiting for phone". That message keep flishing and nothign else seems to be happening.
Anyone encounter a simple problem and it is possible to fix this one?
Br
HG

open maps, then close it.
then open your x-terminal
type
sudo gainroot
copy and paste this in:
cp /home/user/MyDocs/.qf /home/user/MyDocs/qf
then connect to your pc in pc suite mode and launch mapp updateer.
that should do it.

"WAITING FOR DEVICE" problem for Map Loader 2.0.2

Similar Messages

Maybe you are looking for