Waiting for local disks??? problems with fans and starting up

Hello and please help me. My late 03 Mac isn't loading up. It gets past the grey bit and onto the loading part where everythings going fine until it stops on 'waitng for local disks' the fans then start to go nuts and I have to switch it off manually cos nothing is responding and I fear it may blow up. There's no disks in the drive and I've tried pressing the pmu button, disconnecting the wires and rebooting it from the original disk (when I do the latter it simply loads back up and stops at, yep you guessed it...waiting for local disks)
Any suggestions before I take it into an apple store?

Hi! Try restarting with the mouse button down to eject the disc. After you get the disc out if it still won't boot hold the option key down until the disk comes up and you can select the correct one to start from. All else fails boot from the install disc ("c" key down at startup with the disc inserted) and run the repair disk function of disk utility as per THIS. Tom

Similar Messages

Won't boot up, it says "Waiting for local disks"

The other day I got a warning that I was running out of disk space and that I should delete some files off my computer. I was going to do that, but I didn't for some reason and then shut down the computer. Now when I try to start up the computer it will start booting up--but then it gets to, "Waiting for local disks" and won't go past that. Will a 512mb internal memory card solve the problem?

Ridders3425's tip on holding the mouse button down on startup should work fine. You should be aware that when burning a disc, you really need at least as much free space on the hard drive as the size of the disc being burned; e.g., about 640MB for CD-R, 4.7 GB for DVD-R. Allowing a few hundred MB for the system swap files, and you get the rule of thumb to keep 1 to 5 GB free space on the hard drive. That's to allow for creation of the temporary scratch files that are creating durning the burning process. That puts you in a Catch-22 situation when you get the running of of drive space warning: you needd to delete some files to gain space, but you can't really back anything up safely without free space to start with.
Do you have access to another Mac? You could then use a Firewire cable to connect the two and try to boot your eMac as the target disk; refer to How to use FireWire target disk mode. You can then use the other Mac to perform the backup of files and to remove enough unneeded filed from the eMac to permit it to boot.

EMac Freeze on 'waiting for local disks' startup bar

hello!
my emac is starting up completely normally except when the startup bar gets to "waiting for local disks", where it freezes, although i do have control of the mouse when this happens. i left my computer on all day (maybe 11 hours) and when i returned, it was still in this state. restarting the computer without an ethernet cable results in the same issue.
is there anything else i can be doing to fix this? i didn't think this would be much of an issue, so i haven't done anything besides restart without the ethernet cable. please help!

nevermind! i had a corrupt DataTraveler® 2 GB usb attached to it during startup... removed that and it works fine

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Dual G5 late 2004. Some problems with fan and freeze and now can't start

I just purchased a late 2004 Dual 2.5 Gig, with PCI-x and 1 gig ethernet. 1 Gig of what I presume to be factory ram and blue toothe. Connected to a new 23" Apple display.
The problems I have been having pale to where I stand now. I am stuck and can't move forward. At this point, the computer is off. When I try to turn it on, it does little to nothing and gradually the fan speed increases until the computer sounds like it wants to take off. The screen either stays dark, or sometimes I see the ? briefly, and then the grey screen with logo and that is where it stops. Currently I can't get past a lot of fan noise??
Can I get this thing started?? I have tried both starting from CD and hard drive. No luck.
This whole mess started yesterday and has continually gotten worse. Those details I can get into if needed, but for now, what can I do to see the screen and start over.
I just bought the machine, and I was doing a clean install that was acting funny. Hard drive sleep mode would cause the machine to not wake up. Specifically it was the monitor that would not wake up. The keyboard and the computer would still respond when I adjusted the volume. The screen was black.
I narrowed the problem to drive sleep, or monitor sleep by using the energy saver preferences. Just the monitor sleeping wasn't the probem. The computer would wake up. But if the hard drive went to sleep, then I could never get the screen back and the computer acted dormant. The only thing I could get was the volume sound from the computer and lights on the keyboard.
I ran Techtool Pro 4.1.2 ( i think ) and it reported possibe problems on the hard drive with the volume. I made the changes hoping that would fix the problem? No.
I decided to flush it all and start over with the install cd, make sure firmware was good, reformat the drive, and then install the System. But instead, I got caught is this loop of death that I can't get out of.
It had a kernal panic the first day I turned it on, but that was the last one. (dark screen with white message) The computer ran rather sluggish at times. I was shocked at times. Very slow finder response.
So? Suggestions? I have searched Apple support and tried anything I can think of. This is my first G5, but I have had some exposure to OSX beginning around 10.2. I am at my wits end and would greatly appreciate some input. For now I have to get some sleep.
Is my battery bad? It just won't start?
Thank you for any help you can provide, or links to articles!!

Hi Lawson, and a Warm Welcome to the Power Mac G5 Forum!
You could try a PMU/SMU reset
http://docs.info.apple.com/article.html?artnum=300341
Use the second procedure if you have a button as shown in the photo - use the first method if you don't. You may not have to remove the intake fan assembly to get at the button. Observe static precautions and make sure to press the button once only.
Then try to start up on the CD/DVD.
If it fires up ok you could then proceed with the 10.4 install as before, and then combo update to 10.4.8
http://www.apple.com/support/downloads/macosx1048comboupdateppc.html
I would connect only a display, wired keyboard and mouse to start with - and disable any of the sleep, etc. Options in Energy Saver.
You may wish to use the Disk Utility on the 10.4 retail disc(under Utilities in the menu) to Erase and zero(select Security Options) the drive before the install.
The kernel panic and other problems could have been caused by a corrupted system on the boot drive, or by hardware problems, such as RAM, video card, battery, etc. Some of the hardware stuff is linked-to further down the post here
http://discussions.apple.com/thread.jspa?messageID=3084827&#3084827
However, try the PMU/SMU reset and erase/install first, and post again with details if you still have problems.

Reinstallation for IOS skype. problems with groups and contacts

I was having a problem with Skype on my Iphone; new messages wouldn't load, and if they did it was around 10 minutes after they sent them. So I uninstalled the app and then reinstalled it. As soon as I logged into my account I realized most of my contacts didn't have a profile picture, nor did it have our conversations. It also got rid of all my skype groups; I still got notifications for those groups, but if I clicked on them it would bring me to a page saying that it's an empty group. Also if I get on skype on my laptop everything is fine, I still have my groups, my contacts all have pictures and our conversations are still there. I tried to reinstall it on my phone again, but this time all my groups were still gone, but different contacts wern't complete. Because I still had the contacts I tried to send a message on of my contacts that didn't have a profile picture and although it said it sent, I never got a reply. So I got on my laptop and asked if he got it, and he said he didn't. Is anyone else haing this problem? If so do you know how to fix it? Thank you

Ok I just talked to support via chat and apparently this is a known iPhone mobile App issue. This is exactly what he said to me: "I was informed that this issue already have a ticket to our engineers and they are already working on this one. This has something to do with the latest version of Skype for tablets and mobiles. We may release another version of Skype app so once an update is avaialble, update the app on your phone ASAP." Hope this ease some frustration.

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?

Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?
I´ve installed a week ago but i downgraded to SL again. My CPU was hotter and high rpm fan eve in idle state.
Does fix 10.7.1 this issues?
I´ve got first generation macbook air, 2gb ram, ssd 60gb .

Simply NO, we´re still waiting....

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response.

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?

Look here
Order product | Platform, language swap

I am not able to download ITunes. I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don

I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
Ranjit

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

Waiting for local disks??? problems with fans and starting up

Similar Messages

Maybe you are looking for