Waiting for mavericks?

It's worth it to buy the new MacBook Air now (June 15) with mountain lion, knowing Mavericks is coming on September? Or should I wait mavericks is public released?

jefftlj wrote:
My dilemma is whether to buy it now or wait for another 2 weeks time. We don't have an Apple Store here in Malaysia, what we have is some Apple Authorised Premium Reseller like MacCity. I went in to consult their sales rep last week, he actually suggested me to buy it in Mid of August (assuming Mavericks will be out in mid September, then I'd be entitled for free update from Mountain Lion to Mavericks, most probably). It'd just be 2 weeks away and I'm still a student, I know $20 is not a big deal for most people, but if I could just wait 2 weeks times to save up the $20, it sounds like a good bargain to me.
Just buy it now. Being a student, you should wait before
using Mavericks anyway, at least to the first major rev,
to be sure all signifigant bugs have been dealt with. There
could be issues with Mavericks that may interfere with your
use as a student.

Similar Messages

Been waiting for 3 hours for the download to start/show progress

So I've been waiting for Mavericks to start downloading for close to 3 hours now. I've scoured this forum and tried basically everything I read that had seemed to work. Nothing has worked. Mine is still grey, sitting there saying "downloading" on the Launchpad. I'm stopped and started it. Deleted and restarted it. I have no progess bar in the App Store.
Anyone have any other ideas on how to get this going?

Yes Pull the POWER and shut down your Mac for 5 minutes. Plug it back in and restart, make sure your present software is up to date. Now you can download Mavericks and bare in mind this can take severaql hours to complete and do not interupt in any way leave the computer to do it's work.

I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

I am trying to download the new OS Mavericks. It has been saying 'Waiting' for over an hour? How can I fix this?

with a little patience - people all over the world are downloading mavericks.
alternatively you could restart your computer and try again

Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

Maverick does not recognize my Phonic Firefly 302 Firewire. One year waiting for a fix.

Cedip,
in September 2012, following the release of Mountain Lion, Phonic advised Firefly owners that their products’ support ended with Lion — with the possible exception of the Firefly 302 USB. Since they didn’t support the Firefly 302 FireWire under Mountain Lion, they’re not going to support it under Mavericks either. (Note that Mavericks was first released eight months ago, not one year ago.)

What is this all about? "The "QuickTime Plug-in 7.6.6" plug-in is slowing down your Mac. You can wait for it to recover or stop it now." I'm running Mavericks 6.8.

I regularly get a prompt reading as follows: "The "QuickTime Plug-in 7.6.6" plug-in is slowing down your Mac. You can wait for it to recover or stop it now." I've tried waiting, but nothing happens. I "stop it now" and lose the page I'm reading.

GJD
You haven't provided quite enough info for anyone to be able to help. Please follow these tips:
Quoted from Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
CCC

HT1386 I have an iPod 5, IOS 7.1 and Macook pro OS Maverick, i've updated my iTunes but when I want to sync my iPod it gets stuck on the 5th step "Waiting for changes to be applied" I let them at night for about 8 hours but the syncing hadn't done.

This problem has been happening for the past 3 months. Please help me.

Try:
"Waiting for changes to be applied": Apple Support Communities

Is it possible to wait for data using ODIWaitForData on a column of table

Hi,
Is it possible to wait for data on a column instead of waiting for data on a table.I knwo there is ODIWaitForData for which I can use the Filter Column and Filter Variable expressions to wait for data.But I do not know what is the value that I amy recevie ,so in a sense I do not know what is the value that I may be expecting.So how else can I wait for the data on a column.Note that I have used even the SQLFilter option in ODIWaitForData..
Thanks & Regards,
Pera Mahendra

Thank you for responding to my post Niel. The HD is completely empty like it's not even formatted and no partitions yet. I have the installation DVD that I borrowed from a friend. I tried to insert it into the external CD/DVD drive, restarted the PC while pressing and holding the C button then I see the apple logo after a while it was showing a not allowed sign, the icon that is circle and has slash in the middle of it. I replaced the HD because my old HD crashed after upgrading to OS X Mavericks.

HP Laserjet 3055 printer "waiting for printer to be available" after HP Printer Software Update 3.0

I have an HP Laserjet 3055 All-in-One Printer. It has been printing just fine from my iMac running OS 10.9.5 (Mavericks) until after the HP Printer Software Update, Version 3.0, that I installed on 1 Oct 2014. Although the 3055 is shown as connected/idle to my iMac via USB, after clicking "PRINT" for a document, the print queue status soon changes from "printing" to "waiting for printer to become available", and the printer never becomes available. I have tried rebooting everything (printer, computer, text software), checking USB cable connections and changing USB ports, deleting and re-adding the 3055 printer (numerous times!) even after resetting the print system, but could there be something inherently wrong with the latest HP driver (version 19.9 for HP Laserjet 3052)? Or is it possible something else is going on? In other words, I have exhausted all the solutions I've found in these and other forums to no avail.
I have tested this printer by connecting it to my MacBook Pro (also running OX 10.9.5) but without having installed the HP Printer Software Update, Version 3.0. (Hadn't gotten around to this update...) The printer works fine, even though the driver has the same version number--19.9 for HP Laserjet 3052. So could the version 19.9 driver in the latest HP Printer Software Update be corrupted? Is there any way to reinstall that driver? Or copy the 19.9 driver from my MacBook Pro and install it on the iMac? HP only refers to the Apple Software Update process for Mavericks compatible drivers for this printer. Can I manually uninstall the HP driver for the Laserjet 3055 from my iMac and then have the iMac download the driver again in the process of re-setting up the 3055? Any suggestions appreciated.

Many thanks for your suggestions. After creating a bootable back-up, I tried the first suggestion--downloading and re-installing the HP printer driver update kit for which you kindly provided the link--but to no avail. Before downloading the driver update kit, I "reset the printing system", clearing all the installed printers, queues, etc. After re-installing the HP printer drivers, I went to System Preferences>Printers & Scanners to once again add the HP LaserJet 3055 only to discover it was already listed as installed! This I find baffling, to say then least. I tried printing and again got the "waiting for printer to be available" message. I subsequently tried deleting and re-adding the printer, going through the printing system reset again, but still no-go.
I also tried another approach to adding the printer which perhaps will shed some light on the problem. After clicking on the "+" button to add the printer, I select the "HP LaserJet 3055" which shows up as available via USB. Then, instead of using the "HP LaserJet 3052" driver that automatically appears in the "Use" [choose a driver] field, I chose "Auto Select" to see what happens. As the computer processes this request, the status message changes from "Gathering printer information..." to "Waiting for printer to become available..." And, of course, it never becomes available. This strikes me as odd, that the printer set-up system "sees" the printer accurately enough to list it as available to add but can't find it with the "Auto Select" approach to getting the appropriate driver. Of course, when I simply go with the "Use HP LaserJet 3052" driver option that, naturally enough, is the one automatically suggested by the printer set-up system, the printer is "successfully" added. I say "successfully" in quotes because it never becomes "available" to print something.
Before I try your second suggestion--downloading and re-installing the 10.9.5 combo update--I wonder if it's possible that the printing system reset process is "broken". It's as though the reset fails to clear the printer queue, making it appear that there is a pending printing job that the system is waiting to be finished. Also, as noted above, I reset the printing system prior to re-installing the HP printer driver update kit and then, after installation, the HP LaserJet 3055 magically had already been added. This makes me wonder if the printer wasn't properly "cleared" from whatever makes up the printer System Preference process during the reset.
Any other thoughts?

Adobe CC apps running s_____l_____o_____(wait for it)______w.

Hey gang. I have an iMac running Mavericks OS.
2010 model running Intel i7 quad core, 16GB RAM with 1TB HHD and 128GB SSD. When opening Ai or Muse, the apps are running freakishly slow. Example; when moving an object I have to wait for the object to catch up to my mouse... I was running all my adobe apps off the SSD, then tried running them off the HD, no luck.
I was having this poblem with my old laptop PC and decided to switch to a more powerful Mac. I'm not dogging PC's I use a PC with the same guts at work (and the same apps run smooth). Any body know of any reason these apps are so slow.
Please Help, I'm desperate (said with extensive over exageration). Thanks
Cheers

If you have a problem with payments or downloading or activating programs, this IS the place... otherwise the people in the individual product forums know a lot more about the individual products
If you don't want to go to those forums that is, of course, your choice
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq may have a link to help

Updating Captivate 6.1.0319 for Mavericks OS when it won't even launch?

How do I install the correct update for Mac OS Mavericks and Captivate 6.1.0.319? Clearly without the update this version will not run under Mavericks, so I cannot perform a Help > Update as described in the download guide. Is there another way or am I missing something here?
Our clients use version 6 so we must be able to continue with that instead of version 7 unfortunately.

Hi Hlmanshu,
Thanks for your reply but we've since solved the issue in the following way... (possibly not correct but seems to work!):
Basically we had an install of Captivate 6.1 on a Mac OS X 10.8 which was working fine and recently changed from the month to month subscription into the yearly month to month. This change resulted in it being patched to 6.1.039 (I think or maybe it was 6.1.038), as after a recent upgrade to Mavericks, the install stopped launching. After some fiddling around I checked the forums and eventually found the issue documented, and the page to the solution downloads - http://www.adobe.com/support/captivate/downloads.html.
However the solution for the 6.1.039 users was to launch the app and use the Help > Update function to obtain a Mavericks compatible fix… clearly we could not do this, hence the original post on the forum. I was wanting a standalone download of the Mavericks fix for our version, and maybe if I had emailed your subs support then it would have been provided. But either I was miss reading the downloads page, or missing something else, so I decided to fiddle a little further before I saw your reply.
So I wondered if I could install the ‘non-recommended’ patch to at least get it launching, and then use the menu to update. The first patch download I tried did not work (possibly due to a download error), but trying 6 Patch (6.0.1.240), it installed without issue. Captivate then ran on Mavericks, and I followed the Help > Update option to patch it up again.
So we have, at least for now, a working 6.2 version of Captivate. Incidentally our yearly month by month licence seems to work for this version even though it lists version 7 - which is no good to us as our current client uses 6.
I would recommend the following for future situations like this:
1. Adobe send email communication to all known users of their software, where OS and (if possible to check) version of install is likely to have an issue to Mac OS or other OS updates. It seems that on the forums the first patch was published in Dec 2013, so I suspect early Mavericks users were rather frustrated at the delay - but until you make this information more public you will continue to frustrate users over the next few months whilst Mavericks continues to roll out.
2. Clearly the error given in this situation, a caution symbol, can be considered a local computer problem - especially as the frequency of using Captivate may mean the upgrade of Mavericks and the next use of Captivate are weeks apart. We lost a few hours trying various OS level checks such as permissons, checking subscriptions, and reinstalling the version we had. On that point, without the application launching there was no simple way to confirm which version we had installed, so when I eventually found the forum and upgrade instructions it was not obvious which one to install. Each of the files was a significant download size, so again some lost hours waiting for patches we did not need.
3. Clarification at some level about the changed subscriptions, especially the fact that a version 7 licence will permit version 6 to be used instead.
In regards 1,2, and 3, I must apologise if I've missed something and this information was already communicated... but having the information at my finger tips when our instructional deisgner was needing to complete work for a client would have been great.
Thanks and I'll post again should our current install (what ever version it is) buggers up in some way soon!

ITunes sync getting stuck on "waiting for changes to be applied" with the latest iTunes 11.4.0.18 and ipad2

Downgraded to ios 7.1.2 after ios 8 disaster. Now iTunes 11.0.4.18 and windows 7 and my ipad2 will not sync. I received an error message that the sync failed to finish. I have lost all my apps I think but that is another problem. Why won't my pad sync?

iamkurtvella wrote:
Anyone having this same problem? I need my iPad to sync! efclvkjhbsdfvlkj
Yes, my iPhone 5 running ios 7 will not sync in *any* way with itunes now. I can neither add nor remove content via itunes. I just tried to delete 100% of my music from my iphone, it hung forever on "Waiting for changes to be applied" and then when it was finally done... no changes had been applied.
I can't add, remove, change, delete or in any way of any kind sync my iphone with itunes any longer.
I'm becoming the person who refuses to update to the new Apple OS. I used to get very excited about new OS updates. That all ended around Mountain Lion. Yesterday when I saw that Mavericks was out I wasn't excited. Instead I felt a sense of dread, and for good reason. Every time they release an OS in the last few years it's just a cluster-F.

Dial up usb modem for mavericks?

Mavericks clearly indicates that it works with dial up but I have been unable to find a modem that does not stop loading pages after a minute or two. The US Robotics 5637 modem that I was using for 10.6,7 and 8 will log on to the server and start downloading pages but then stops. It does not drop the connection, the pages just stop loading. A few pages it will load but something like Facebook is impossible. I monitor the connections via Little Snitch. I have a MBP that I was using and a Mini that I just purchased. After upgrading to 10.9.3 the MBP will not finish loading pages on dial up and the Mini, a clean install, will not either. I have done all the upgrades recommended bu US Robotics. US Robotics says the modem works with Mavericks. Apple support has been no help and declines to tell me what modems might actually work, refers me back to US Robotics and tells me to search the forums. I have followed all their troubleshooting and installation recommendations. Personally, I think it is OS 10.9 and not the modem but what do I know. Apple is not interested in solving the problem even though I am within the 90 day support window. I am outside of the US now and have no alternative to dial up internet access. Can anyone help me? Right now I am using a 10 years old Dell Latitude to access the internet and have no problems. After spending close to $2,000 on the Mini and peripherals I'd like to be able to use it. I'm pretty disgusted with Apple not being helpful on this. They have offered no alternatives other than to find someone other than them to figure it out.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$ \$.+\$/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Waiting for approval from other device on mac

Im waiting for the macs keychain access to send approval to one of my other devices for approval after a fresh installation of mavericks 10.9.3,
my question is how long should it take because its been 3 hours so far.
it doesnt appear to be working for me

Hello pj o\'connell,
Thanks for using Apple Support Communities.
Please see below for instructions on troubleshooting this issue of not receiving the verification code:
I'm not receiving the verification code via SMS.
Make sure that you have a good cellular network connection on your phone.
Check that your phone number is one that can receive SMS messages. You can do this by having someone send you a text message.
Check that you have the correct phone number associated with your account:
Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.
Check Apple System Status to see if there is currently a service outage affecting iCloud Keychain.
If you do not have access to a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity for help completing iCloud Keychain setup.
iCloud: Troubleshooting iCloud Keychain
http://support.apple.com/kb/TS4644
Take care,
Alex H.

ITunes 11.1.1 will not sync with ios 7.02 - "waiting for changes to applied"

iTunes 11.1.1 running on MacBook Air will not sync with ios 7.02 - "waiting for changes to be applied". I have been having this issue since upgrading to 11.1. I thought the upgrade to 11.1.1 will take care of it

iamkurtvella wrote:
Anyone having this same problem? I need my iPad to sync! efclvkjhbsdfvlkj
Yes, my iPhone 5 running ios 7 will not sync in *any* way with itunes now. I can neither add nor remove content via itunes. I just tried to delete 100% of my music from my iphone, it hung forever on "Waiting for changes to be applied" and then when it was finally done... no changes had been applied.
I can't add, remove, change, delete or in any way of any kind sync my iphone with itunes any longer.
I'm becoming the person who refuses to update to the new Apple OS. I used to get very excited about new OS updates. That all ended around Mountain Lion. Yesterday when I saw that Mavericks was out I wasn't excited. Instead I felt a sense of dread, and for good reason. Every time they release an OS in the last few years it's just a cluster-F.

Illustrator running S____________L_________O_______(wait for it)____________W on Mac.

Hey gang. I have an iMac running Mavericks OS.
2010 model running Intel i7 quad core, 16GB RAM with 1TB HHD and 128GB SSD. When opening Ai or Muse, the apps are running freakishly slow. Example; when moving an object I have to wait for the object to catch up to my mouse... I was running all my adobe apps off the SSD, then tried running them off the HD, no luck.
I was having this poblem with my old laptop PC and decided to switch to a more powerful Mac. I'm not dogging PC's I use a PC with the same guts at work (and the same apps run smooth). Any body know of any reason these apps are so slow.
Please Help, I'm desperate (said with extensive over exageration). Thanks
Cheers

I wish I had a dollar for every post like yours--I could retire
try googling make Adobe apps run smoothly on Mavericks or similar (so many just hit the 'upgrade' button and then can't figure out why their apps run slowly)

Waiting for mavericks?

Similar Messages

Maybe you are looking for