Waiting for SP1 to come through Windows Vista Update?

Hi:
I have been waiting for SP1 to make an appearance through Windows Update and am still waiting. I checked out the knowledge base and checked all the problem drivers to see if I had any of the components.
I don't have any of them, nor do I have any hidden updates that I have opted not to install. Is there anything else I could possibly check? I checked all my drivers in device manager and all are updated.
Thanks!

Hello Lisa
I know it sounds now stupid but what is your problem? Maybe I understand English not so good but I didnt find any concrete question. I understand that you are waiting for SP1 and what now?
To be honest you should not install SP1 at the moment. At the moment SP1 is not supported by Toshiba and if you will have some problems nobody can help you. SP1 stuff can (muss not) have some negative influence on different drivers or tools. Toshiba will fix this and offer updates but just when SP1 is official supported.
If you have all latest drivers it is enough. Leave it as it is.

Similar Messages

  • HT201401 I am so frustrated!!!! My iphone 4s will no longer show caller id when a call is waiting, and it won't answer the call either.  I need to disconnect from first call and wait for call to come through without knowing id.  Help!!! I see no solutions

    My iphone 4s will not answer call waiting.  When I go into settings there does not appear to be the option to enable call waiting, yet I have had it for a year and had no problem with it!  Caller id does not show up during an existing call and the call waiting cannot be ansered.  Can anyone help???

    My iphone 4s will not answer call waiting.  When I go into settings there does not appear to be the option to enable call waiting, yet I have had it for a year and had no problem with it!  Caller id does not show up during an existing call and the call waiting cannot be ansered.  Can anyone help???

  • Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

    Hello
    Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
    I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
    see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
    Any idea?

    hmm... this is strange ?:|
    The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
    I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
    However, the case seems to be clear dont install it if the driver is not designed for your OS.
    Regards

  • Waiting for sequencer to come up (Rosegarden)

    I really want to get rosegarden working, so I can start producing and such.  But I'm having some errors.  First I get an error message box telling me that Sequencer could not be started so sound and recording is unavailable.  If I look at the standard output in the terminal window I see something like this:
    JackDriver::initialiseAudio - JACK server not running
    ALSA lib seq_hw.c:455:(snd_seq_hw_open) open /dev/snd/seq failed: No such file o r directory
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    rosegarden: RosegardenGUIDoc::syncDevices - waiting for Sequencer to come up
    Any Ideas?

    try:  modprobe snd-seq-oss

  • LabVIEW Toolkit for LEGO MINDSTORMS NXT in Windows Vista

    Anybody knows how install LabVIEW Toolkit for LEGO MINDSTORMS NXT with Windows Vista?. Installing it gives me an error that says 'The windows installer is corrupt. To attempt to resolve the issue, please register the engine by running regsvr32.exe on msi.dll'. But it doesn´t work.
    Thanks in advance

    The work around for this issue is to install each of the MSI files setup.exe calls when running the installer.  I was able to reproduce this issue for the 1.0 toolkit I was unable to do so for the 2.0 toolkit.  This being said the instructions bellow are for those of you who are running into this issue with the 2.0 toolkit.
     Listed bellow are the MSIs  you will need to run (shown here at their default location after the self extracting EXE has been run).  You should run these MSI in the following order.
    C:\National Instruments Downloads\LabVIEW\7.1\LabVIEW NXT Toolkit\2.0\Products\MetaUninstaller\MU\MetaUninstaller.msi
    C:\National Instruments Downloads\LabVIEW\7.1\LabVIEW NXT Toolkit\2.0\Products\MDFSupport\MDF\MDFSupport.msi
    C:\National Instruments Downloads\LabVIEW\7.1\LabVIEW NXT Toolkit\2.0\Products\MDFSupport\MDF\EULADepot.msi
    C:\National Instruments Downloads\LabVIEW\7.1\LabVIEW NXT Toolkit\2.0\Products\LVLEGONXTTK\LVLEGONXTTK\LVLEGONXTTK.msi
    C:\National Instruments Downloads\LabVIEW\7.1\LabVIEW NXT Toolkit\2.0\Products\LVLEGONXTTK_LV71\LVLEGONXTTK_LV71\LVLEGONXTTK_LV71.msi
    C:\National Instruments Downloads\LabVIEW\7.1\LabVIEW NXT Toolkit\2.0\Products\NXT_Driver64\LegoMindstormsNXTdriver64.msi
    A similar procedure can be used to install the 1.0 toolkit if need be.  You can get the install order from the parts from the [Parts] section of the setup.ini.  
    Mark
    LabVIEW R&D

  • I downloaded the latest important update to windows vista yesterday, and since then Firefox crashes very soon after enetering the portal of any website I visit, and I want to know if the windows vista update could be doing this?

    Yesterday (23rd March) my computer appeared to perform an auto update of windows vista and since then every time time use firefox it crashes shortly after entering a web portal (after about 1-5 seconds). It even crashes on the BBC news page which I always use to check stability. I have been using Firefox for years and it has just started doing this. However, I examined the programme files and actaully cannot see a windows vista update for yesterday, but I can see that there was a Firefox update, so now I'm a bit confused. Looking at the program files in more details it appears that there was a very major update of Firefox taking place including lots of file extensions. You should also know that your password recovery process doesn't work. I never got the email that is supposed to help me recover a lost password. I am really disappointed with Firefox doing this. It's costing me time and money. Can you help before I give up and go back to using Windows explorer (ugh!). I have thought of simply removing Firefox and starting again with a new download but that might not solve the probelm and I will lose my bookmarks.

    I have an update to my message posted yesterday regarding Firefox crash after vista update. Today it got worse when Firefox wouldn't open at all and Windows explorer also stopped working. Curiously, email was still working, and when I checked another (little used) account on the same PC, I got a perfect connection with Firefox and Explorer. I had to conclude that the latest updates of Vista have interacted with some application only found in my main account on the PC. I tried opening Firefox in its safe mode and I tried opening explorer without Plug ins, but neither worked. Finally I decided the only answer was to do a system restore and wind back the windows software to where it was before the problem. I now have Firefox and explorer restored to working order, but I still don't understand why, because I got a message saying the system restore hasn't worked. Full Comprehension of the cause is beyond my capability, but through trial and error as described above I seem to have fixed it. The suspect vista updates are KB2505189 , and KB2524375.

  • Satellite A205-S4607 doesn't start after windows vista update

    Hello,
    I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
    The model is Satellite A205 -S4607

    Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
    Message was edited by: Nvillegas

  • T61 no sound after Windows (Vista) update (?)

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

  • Incompitible Print Setting Error for HP LJ 8500n in Windows Vista

    Hi, I have two laptops, one with Windows XP and another with Windows Vista Business. There is a HP LJ 8500n connected with router and accessed by both laptops. Somehow, when I print from Windows XP laptop and I change the print settings there is no error message. But, when I print from Vista Business Laptop, it prints without any error message for default setting, but when I try to change the print setting (to change the paper size or color) the error message comes with "Incompitible Print Settings. It says: "There are one or more conflicting settings. One of the conflicting settings is: Accessory Output Bin: Not Installed. Output Bin: Mailbox 5." Once I click "Ok" it will have same message with output bin changed to Mailbox 6, etc. After I go through approximately 8 to 10 output bins messages, it gives me the screen where I can change the print settings. After that, I can print with revised setting. But, it is very annoying to go through these messages every time I have change the print settings.
    Please reply, Thank You,

     @fshrago 
    For the laserjet 3390, you have the option of using the either the Universal Print Driver (network connection) or Windows Update Driver (USB connection)  in windows 8.1.  Neither of these drivers come with a fax or scan driver.
    To use the fax and scan driver, you will need to use the Windwos Fax and Scan Software however you will need to be usb connected. I have given you links to documents that explain how to use both the Windwos Update driver and the Windows Fax and Scan Software.
    Driver support included in Windows 8 / Windows 8.1 or in Windows Update - usb connection only
    Use the software in Windows 8 to scan - usb connection only
    Please understand that the UPD is a print only driver. If you would like a fax/scan driver you will need to connect via USB and use the Windows Fax and Scan driver along with the Windows Update/In-OS driver.
    Good Luck.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Printing from MacBook to a printer shared through Windows Vista

    Hi Everybody,
    I'm unable to print anything from my Mac laptops to my HP printer which is shared via a Windows Vista PC.
    I have a wireless home network with a PC, a latest model Powerbook G4 15"/1.67 and a MacBook Core2Duo. The PC is connected to an HP PSC 2355 All-In-One printer.
    When I had Windows XP SP2 installed on my main PC, I was able to print from my Mac laptops through Samba (Advanced printer, smb://guest@myIPaddress/printersharename) without any problems.
    I recently upgraded my PC to Vista Ultimate (RTM Technet full version). Now, I can no longer print via my Mac laptops, since supposedly, Vista's implementation of Samba has changed. I can, however, print from my MacBook when it's running Windows XP SP2 without any problems. This leads me to believe that the sharing-side on the Vista PC is set up correctly. The XP to Vista over wireless printing obviously doesn't use Samba. The Vista share does not have a password on it.
    I've installed the Foomatic/HPIJS drivers on both my MacBook and the Powerbook. These are the errors:
    Powerbook: "Unable to connect to SAMBA host"
    MacBook: "The process "foomatic-rip" stopped unexpectedly with status 1"
    I've tried all kinds of combinations for Samba, and also via the option "Windows Printing". My PC is in the same network Workgroup as the Macs, and they can see my Vista PC fine. I can also connect and share files with my Vista PC without any problems and connect through Samba using Finder (for file sharing). I cannot, however, see my shared printer through the Windows Printing dialog.
    Can anybody help me out?
    Izzer
    MacBook C2D / Powerbook G4-1.67   Mac OS X (10.4.8)  

    Have a look at this discussion:
    http://discussions.apple.com/thread.jspa?messageID=3640079&#3640079
    Hope it helps.
    PowerBook G4 1.5GHz, 2GB   Mac OS X (10.4.6)  

  • SAP NetWeaver 04s SP9 for JAVA Installation problem on Windows Vista

    Hi Guys,
    Firstly, anyone installed WAS on Windows Vista home version?
      I have gone thru couple of postings in the SDN and disabled firewall but no use.
    here is link :   Port 21212 error : Couldn't install 2004s
      When I am trying to install, getting below problem.
    Error log
    <b>SAPinst is not available on localhost:21200
    Connection to SAPinstAdapter could not be established, see following messages.
    Could not connect to host localhost on port 21200
    Java.net.ConnectionException : Connection refused: connect</b>
    Thanks in advance for your quick reply....
    Prs.

    Hi Anand & Mahesh,
      Thanks for the quick reply.
    Any one of you got a chance to install NW04S 2007 or New York on Windows Vista?
    I think suggested one not available in SDN I guess.
      If I am not wrong, I can get it from Service.sap.com....
    Can you give me the complete path in the service.sap.com if you know....
    If this would not click, alternatively I am planning to change my operating system to Windows XP, this is not a good idea but I dont have option.
    Thanks in advance for quick reply.
    Regards
    Prs

  • Windows Vista update for palmOne LifeDrive

    http://www.palm.com/us/support/windowsvista/#palmdesktop
    LifeDrive Manager (for LifeDrive) and File Transfer (for Tungsten T5), the desktop applications that simplify file synchronization between your handheld and PC, are currently not compatible with Windows Vista. Please check back for updates.
    When will updates be available for the LifeDrive?  There's nothing wrong with the LifeDrive so I really don't want to purchase another PDA right now.
    Thank you
    Post relates to: LifeDrive

    Sorry, I just changed the batteries in my keyboard.
    I have another question.  I installed the Palm Desktop Version 4.1.4 from the CD onto my computer running Windows Vista.  Since I can't use the LifeDrive in Vista, how do you uninstall the software.  I successfully uninstalled the LifeDrive Manager which deleted the Palm Desktop icon from my Start Menu, but when I click on another Palm Desktop icon (shortcut) that I saved in another folder, it opens the application.  The Palm Desktop application is not listed in Start > Control Panel > click Uninstall a program under Programs > Palm is not listed in the Programs and Features window. 
    I tried to manually deleted the files by going to Start > Computer > HP (C > Program Files (x86) > right-click the palmOne folder > click Delete > Are you sure you want to move this folder to the Recycle Bin > click Yes > a small windows pops up titled Destination Folder Access Denied with the message You need to confirm this operation. > click Continue > Windows needs your permission to continue > click Continue > a small windows pops up titled Destination Folder Access Denied with the message You need to confirm this operation. > click Try Again > the same windows appears so click Try Again > and so on.
    How do you remove the PalmOne Desktop software from my computer?
    Thank you

  • Best calendar for iphone 5 sync with Windows vista ?

    I use windows vista at home/work. I need a new calendar/software ( eg Outlook ), and am considering purchasing the iphone5 as well.
    Which software do you recommend for windows vista that will easily sync back and forth with the iphone 5 ? 

    If all this changed after you had to change the password to access your server, then perhaps you are mistyping the password.
    The following articles may help:
    iPhone and iPod touch: Email account setup
    http://support.apple.com/kb/ht1385
    iPhone 2.1 software: Exchange ActiveSync Account Quick Setup Guide
    http://support.apple.com/kb/HT2480

  • Unable to locate a default player for iTunes audio files in Windows Vista

    I previously owned a Compaq and saved my music in an external storage and worked perfectly. I then purchased a HP with Windows Vista and now am having problems with iTunes. The new computer indicates that iTunes has detected that is not the default player for audio files. It gives me a selection of file extensions, "iTunes music database files", "iTunes music store URL", "M3U Audio Playlist", "MPED4 Audio Files", and others in Windows Media Player. Which one should I select? Thanks
    Joe

    I created a config file (which is very handy in deployment and debuggin) that contains the class name and other additional parameters that is available in the optionsMap inside the LoginModule.
    My Config file looks like :
    DatabaseAuthenticate {
    com.mahesh.research.jaas.auth.CLoginModule required debug=true database.userid="matest" database.password="matest" database.driver="oracle.jdbc.driver.OracleDriver" database.url="jdbc:oracle:thin:@den-dev-2:1521:trexdev" ;
    and i have an entry in the policy file
    grant{
    permission java.util.PropertyPermission "*" , "read, write" ;
    when running the application i specify the following VM Parameter.
    -Djava.security.auth.login.config ="file:/D:/Research/Jb6/JaasResearch/config/login.config"
    offcourse, the jar files in the classpath.
    When i Create a LoginContext and call its login() method, Everything works fine.
    you might wanna try this way and very important you need to specify all permission.
    if you are running under Security manager , try switcing on the debug option as -Djava.security.debug=access.failure that should give a hint on where the problem is.
    hope this helps

  • JDK version for installing SOA suite on windows vista

    Hi
    I am trying to install SOA Suite 10.1.3.1 on my Windows Vista 64 bit system. Currently, when running irca.bat, I am getting error "invalid java version 1.6.0_13. Version 1.4 is required."
    But isnt the script supposed to run for all 1.4+ jdks. Which version of jdk do I need to install?
    Thanks.
    John

    The complete error message in the popup is "Error in CreateOUIProcess(): 3". When you hit <OK>, you are back at the command prompt where you typed setup.exe.
    The log is as follow:
    Using paramFile: D:\Disk1\install\win64\oraparam.ini
    Checking if CPU speed is above 300 MHz. Actual 2327 MHz Passed
    Checking swap space: must be greater than 500 MB. Actual 12689 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
    The commandline for unzip:
    D:\Disk1\install\win64\unzip -qqqo ..\..\stage\Components\oracle.swd.oui\11.1.0.7.0\1\DataFiles/"*.jar" -d "C:\Users\ROOT~1.APP\AppData\Local\Temp\3\OraInstall2009-10-20_06-01-08PM"
    The commandline for unzip:
    D:\Disk1\install\win64\unzip -qqqo ..\..\stage\Components\oracle.swd.oui.core\11.1.0.7.0\1\DataFiles/"*.jar" -d "C:\Users\ROOT~1.APP\AppData\Local\Temp\3\OraInstall2009-10-20_06-01-08PM"
    The number of files bootstrapped for the jre is 0.
    The number of files bootstrapped for the oui is 287.

Maybe you are looking for