Waiting for status to reach "Differential sync"

Hey guys, I recently set up MMA and created a couple of virtuals to migrate to Azure. Everything went OK, I was able to push the mobility service, and wanted to migrate the VM to Azure, but I've been waiting for the status to reach "Differential sync"
for some time now.
I know this is question is answered in the FAQ over here:
http://blogs.technet.com/b/srinathv/archive/2014/10/09/migration-accelerator-faq-and-known-issues.aspx but it just tells me to wait. I've been waiting for 24hrs now, and the information under "Volume Protection" isnt very clear to me. I
want to know what the status is, and how long it's going to take before I can start the migration. Now, for example; the resync in transit number. Yesterday, when I left the office, it was at 85. I thought it was 85% so I was hoping to migrate today,
but now it's at 800-something. Is this value expressed in bananas, or megabytes, or what?

Hi Tom.
could you please share screenshot of the replication progress?
if you have still same problem. please send email to mmasupport. one of our engineer will connect with you through remote session and will assist you in this.
Thx-Gopi.

Similar Messages

Hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.

hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
thank you for any help!

Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care.

Ipod touch 3rd generation is stuck in "waiting for changes to apply" during sync

My iPod touch 3rd generation is stuck at "waiting for changes to apply" during sync. I have the latest update and the latest version of iTunes downloaded. Any suggestions for a remedy to this problem? Thanks!

Here is the link for the downgrade from Apple.
Link: http://support.apple.com/kb/DL1103
Here is the Link before you install Apple 10.3 downgrade Read Oct. 17th the 1st on of the 17th.where I said "A" OKAY
Link: https://discussions.apple.com/message/16500143#16500143
I went into my desktop PC the to Start/My music/iTunes folder.
In my folder there was nothing called ITunes Library.itl., but I had file called iTunes Library, in the center of it labeled "Lib", so I re-named it to "iTunes Library.itl.backup" Then went to the folder from iTunes" Previous iTunes
Library" and copied and pasted mine was iTunes Library 2011-04-02 right into the iTunes main folder.
Close your iTunes folder and then install the previous ver. 10.3 of the Apple link. I did not reboot PC. Did not use Cc cleaner nor add/Remove. then after 10.3 said finished installing 10.3 I clicked on my iTune Icon and iTune came up, iPod not plugged in yet.
Then I clicked on "let iTune to find all my music and install them", said towards bottom of iTunes.
Why we don't have the answer but iTune will put all your music in but you will have duplicates of the songs, so you will have your work cut out for you, takes time. plus some of my Artwork was missing, but I save that too.
I'm not Responsible for this instructions, this is what worked for me.
I think everything here is in order. Lot of my information came from all of you guys.Thank you. took a lot of reading, and trial and errors 2 1/2 day latter.

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

I had the same problem. It fixed itself when I opened Internet Explorer (I don't normally use it). I was opening Support Portal to get some support help, but I'm not sure if it was the page or simply opening IE that did the trick.

Does iCloud wait for me to hit the Sync applet?

I've got a MBP running Lion 10.7.2, a first generation iPad and an iPhone 4S, both running iOS 5.0.
I have set both the iPad and the iPhone to sync AND backup via iCloud.
Sometimes something like an iCal event that I've created on my MBP doesn't show up the mobile device for a few minutes. But on my menu bar, I still have the applet I used for MobileMe. Should I be hitting that ("Sync Now") to sync with iCloud? Or does it do it automatically? And if so, how long does it wait before syncing? I can't quite figure out it's system ...

Should I be hitting that ("Sync Now") to sync with iCloud?
No. iCloud syncs automatically.
doesn't show up the mobile device for a few minutes.
Tap Settings > General > Reset > Reset Network Settings then restart the devices.
Mayby that will speed up the sync over your Wi-Fi network.

Waiting for status OK in sessionbean?

I am makinig a project where I have a sessionbean as front end and an other as back end, the back end set a status field as OK i MySql, the front end must wait until this field is set before it execute next method.
Can anyone help?
Peder

Hi Tom.
could you please share screenshot of the replication progress?
if you have still same problem. please send email to mmasupport. one of our engineer will connect with you through remote session and will assist you in this.
Thx-Gopi.

Getting "waiting for connection" message in Lightroom 5.5 sync to mobile

I have tried turning off and on the lightroom mobile sync and signing out and back in. Neither started the sync. What else can I try ?

mdjcrook,
I think your sync being stuck and the 'waiting for connection' message were two different issues and would advise you - if you get stuck again - or anyone else reading this thread that is stuck syncing and with the 'waiting for connection' to NOT use 'Delete All Data'
If you are seeing the 'waiting for connection' message and sync is working, ignore it as that bug just prevents properly showing the sync status but not the actual sync activity. We are working on trying to figure out why this gets stuck in this state - it appears to be network related - but we haven't found anything definitive yet.
If you are seeing the 'waiting for connection' message and you sync is stuck then please generate a diagnostic log (Preferences -> Lightroom Mobile -> (Hold Alt/Option key) and click 'Generate Diagnostic Log' and then private message that file to me and we can hopefully determine the real cause of the stuck sync and a workaround that will prevent you having to use the 'Delete All Data' hammer.
Matt

When I connect my iPhone 5 (iOS 7.0.4) to iTunes it gets stuck when syncing on "waiting for items to copy"

My iPhone 5 running iOS 7.0.4 gets stuck on "waiting for items to copy" when syncing to my iTunes (version 11.1.4). I've tried;
quiting and restarting iTunes,
updating iTunes,
restarting my computer,
restarting my iPhone,
turning off iCloud on my iPhone,
restoring my iPhone from a previous back-up,
disabling "automatically sync when this iPhone is connected" and
just leaving it alone for three hours to see if it would finish syncing
But none of these things have worked... I'm not sure what else to try. My iPhone suffered an error about three days ago when trying to update to the new iOS update and went into recovery mode. I had to restore from an old back-up and that is when my troubles began. However, I was previously (before the crash) having an issue where whenever I connected my iphone to my computer it would delete all my playlists. I'm not sure if any of that is relevant.

My iPhone 5 running iOS 7.0.4 gets stuck on "waiting for items to copy" when syncing to my iTunes (version 11.1.4). I've tried;
quiting and restarting iTunes,
updating iTunes,
restarting my computer,
restarting my iPhone,
turning off iCloud on my iPhone,
restoring my iPhone from a previous back-up,
disabling "automatically sync when this iPhone is connected" and
just leaving it alone for three hours to see if it would finish syncing
But none of these things have worked... I'm not sure what else to try. My iPhone suffered an error about three days ago when trying to update to the new iOS update and went into recovery mode. I had to restore from an old back-up and that is when my troubles began. However, I was previously (before the crash) having an issue where whenever I connected my iphone to my computer it would delete all my playlists. I'm not sure if any of that is relevant.

EPMA 11.1.2 Essbase Hangs at status waiting for Update

I know that in 11.1.1.3 there were issues deploying an essbase cube from EPMA, 11.1.2 however claims to be able to do this, but I am having a problem getting the cube deployed.
I am on 64-Bit Windows 2008, all hyperion products are version 11.1.2 with SQL backend.
I can validate a simple cube just fine from EPMA.
I can create cubes in EAS.
I however cannot deploy a simple cube from EPMA. I have checked all conditions on permissions and followed the guidelines.
The essbase application is registering to Shared Services (thus I can make sure the permissions are Provisioned).
The system gets stuck at "Waiting for Status Update..." it will remain at that level (50%) without ever updating. I have changed the awproperties file to time out after 45 minutes. I am not seeing any errors recorded in any of the logs to indicate what problem is going on.
I need some suggestions as to where to look to force some form of error logs that will give me some clue to the next errors I need to deal with. Or some advice from anyone that has experienced this issue. This is an essbase cube not a planning application. I have EPMA HFM Applications, as well as FCM, FDM deployed on the same foundation without issue.
The only issue I can find close to this is a Planning deploy with problems about JVM size but nothing about Essbase application JVMs.
Any ideas?

Is this an essbase only application? It seems like the property is defaulting to stored and then flipping the initial stored member to shared because Essbase isn't interpreting the deployment correctly. I would try using ShareData as the datastorage property (I think that is the correct spelling). Also, I believe the correct way to set IsPrimary is Y/N and not 0/1.
If that did not work I would try the following in this order:
1 - I would first extract the dimension in question using the file generator and confirm that the properties are indeed correct.
2 - If they were correct. I would toggle the dimension from shared->local->shared. EPMA is still a little nutty and this will fix a fair amount of issues as it will 'refresh' the application's version of the dimension. I would then deploy
3 - deploy from EPMA->Planning only (no essbase creation), then deploy to essbase separately after ensuring the property represents itself in planning. If it is essbase only - create the outlnie instead of refresh.
4 - create a duplicate app in EPMA and deploy the copy of the app - and see if it has the same problem
Try that and see how it goes.

Whenever I try to sync my ipod, it'll say that it's syncing and then "waiting for changes to be applied" when it reaches step 5, then it closes and nothing happens. I don't know what to do :(

Whenever I try to sync my ipod, it'll say that it's syncing and then "waiting for changes to be applied" when it reaches step 5, then it closes and nothing happens. I don't know what to do

Hi, There
What do you mean nothing happends? because after step 5/5 the sync is complete and it should go back to the normal top screen of itunes. Is this what is happning? of is it freezing on step 5?
Message was edited by: Scott\'y

Automatically upgrade any superseded versions of this application not auto installing - Status always waiting for next maintenance schedule

Hello,
I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs.
- The application is set to install to system whether the user is logged on or off.
- We do have user affinity, therefore the user does have a one or more primary devices setup.
- If I run the install manually, it will superseded and install the new application and uninstall the old applications.
- The estimated installtion time minutes is set to 0
- The maxmimum allowed run time is set to 120 minutes.
We're on version SCCM 2012 SP1.
My assumption of how it should work
If the user is logged in or NOT and it's during the maintenance window, it should auto install the application. Maybe I'm wrong.
Here's the scenario.
User JohnDoe has application Viewer 1.0 installed on his machine. He installed this app via the SCCM application catalog. We now need to deploy Viewer 2.0 of this application. I want to ensure when it's deployed it replaces Viewer 1.0 hence
the reason to check the "auto upgrade.."check box.
Here's what happens. In software center, it will pre-downlaod the software and then set the status to "Waiting for next maintenance schedule". The problem is that the status stays like this forever. We do have maintenance windows set
on the device collection that JohnDoe's primary device is part of. Here are our maintenance windows.
- Daily - 9PM to 5AM = 8 hours
- Weekly - Saturday - 12:00AM to 12:00 = 24 hours
- Weekly - Sunday - 12:00AM to 12:00 = 24 hours
Coordinated UTC is not checked.
The business hours in software center are set to 5am to 10pm.
One would assume that it would auto install during the night since we have a big maintenance windows. I checked the ServiceWindowmanager.log and it does seem to show the various maitnenance windows.
Here's what I've tried
- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
- If JohnDoe clicks install in Software center or application catalog, it works. There's nothing wrong with the packages. The issue seems to be related with the maintenance windows.
- If I disable the maintenance windows, then it seems to work but only when I'm logged in. It still does not work if I'm logged out. It only kicks off the installation when I login if it's not during the business hour set in software center.
We need the maintenance windows since we don't want windows patching to occur during the day.
- I searched and ran the report to ensure there's not another maintenance windows setup that would prevent this from installing.
Our current workaround
To ensure users are using the latest version, we deploy the application required for a couple of days, then delete that deployment once we reach a high 90%. The problem with that is if some computers are turned off, they would be using the older version
and it will never get upgraded unless the user installs it manually.
Has anyone encountered this? Any other log files I should look at? Anything else I should verify ? I know in SCCM 2012 R2, you can set the maintenance window to only apply this schedule to software update (patching) but that option doesn't seem
to be available in SCCM 2012 SP1.
Any help, suggestiong, I will take. Thanks.

- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
Re-check your deployment, specially the user experience:
If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
maintenance windows.

SQL 2012 Transactional Replication Publisher is also AG Primary, AG fine, but Replication status continuously 'waiting for next Log backup'

Hi,
I have a SQL 2012 instance that hosts 3 databases that are publishers in (push) transactional replication to subscribers in other domains and are also primary in an Availability Group to other instances in the same domain. The AG is healty (synchronized),
and replication is ok for 2 databases, but the third continuously shows the Publisher to Distributor history status as 'Replicated transactions are waiting for next Log backup or for mirroring to catch up.'
I have weekly full, nightly differential, and hourly log. Those are running and I've tested restoring the publisher db from them into a test instance. The option for sync_with_backup is 0. I generated a new snapshot, no change (haven't
reinitialized, that will be last possible option as this is production). When the log backups run, status will briefly change to 'Approximately (x) log records have been scanned in pass # ..., 0 of which were marked for replication' and some data
does replicate, but then status immediately changes back to the message about waiting for log backup. We are only replicating tables (no views, sp's, etc). All subscribers and AG secondaries are SQL 2012. My db is less than 200
GB data.
The jobs are continuously running and data updates are occurring on the primary. The distribution database is on the same instance as the publishers. Anyone have any ideas what could be happening?
Thanks greatly!

Update - I resolved this.
We had added a new asynchronous instance to the AG, but hadn't added the databases on the new node to the AG yet. Conceptually it seems that adding the instance must have marked the logs and interferred with transactional replication on the
primary. Once I added the databases to the AG on the secondary, then the replication status cleared on the primary and has remained cleared. It is odd though that it only impacted one of the databases in the AG.
cheers.

IPhone 6 stuck on "waiting for changes to be applied" when syncing.

I got a new iPhone 6 a few days ago and I put everything onto it (music, photos, contacts, etc) with no problem from a previous iPhone backup. This morning I tried to sync my phone with iTunes and while the music is listed on the music app on the phone, NONE of it will play and every track has the square with a circle around it that shows its download progress while syncing.
Why is this happening and how do I fix it? All I want is my entire library on my phone but it won't sync. (Also I should have plenty of room on my phone, I got the 128 GB and only have ~30 GB of music) Now on the status bar it says I have 30 GB of music and 30 GB of "other," but none of my songs will play. Also iTunes will get stuck on "Waiting For Changes to Be Applied" and won't finish syncing.
I'm syncing a new iPhone 6 128 GB running 8.1.2 with a Mid 2012 MacBook Pro with Yosemite 10.10.1.
Any help fixing this problem via link or advice will be greatly appreciated. Thanks.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

Iphone 4s not syncing to iTunes *waiting for changes to be applied*

I have a brand new iphone 4s that wouldnt sync with my pc desktop and i recently got a new mbp and the same thing is happening an error keeps popping up in Itunes after the 2nd step of syncing and it says waiting for changes to be applied. Its really frustrating i restored my phone and it did nothing for the syncing just deleted all my apps...and ive researched these problem before and its obvioius a big occurance with other users and apple has done nothing?!?! wth !! and i have no voice memos on my phone so there is nothing to delete for those that have solved their issue that way....So if someone has a solution to help me sync my iphone 4s to my mbp i would greatly appreciate since obviously apple does not care to fix this issue!!!! terrible..

also tried to wifi sync and nothing ...

Waiting for status to reach "Differential sync"

Similar Messages

Maybe you are looking for