"Waiting for timecode"

I have no problems capturing video from my camera using iMovie, but when I try to capture video with Final Cut, it says, "Waiting for timecode" and never starts. I suppose I could capture my video with iMovie and then import it into Final Cut, but I'd rather not do it that way if possible. Any ideas?
If I do use iMovie to do all my capturing, what would be the best way to export the video?
I'm using Final Cut HD v4.5.
Thanks
jeremy

In using Capture Now without limits, the system has been known to try to allocate the entire system disk as available capture space. This allocation will lock the system.
If this is your case you have two options:
1. set a limit in the capture preferences of 1 hour or so.
2. use in and out then capture individual clips.
It is also advisable to employ a second internal hard drive (if your system has the space) or an external firewire drive as the capture/scratch disk.
good luck,
x

Similar Messages

  • Waiting for timecode and device must be in VTR mode

    Trying to caputre a DVD in FCE using a canopus ADVC 55.  We are seeing a message waiting for timecorde and device must be in VTR mode when device control is enabled. Settings on FCE Easy set up will only allow us to use DV-PAL Firewire basic.
    Can you help please?

    We live in Ireland so PAL is correct for us to use.  All settings are correct as follows;
    1.  We wish to transfer a DVD (our own copyright) into an Apple Mac Model OS10 version 10.5.8 using Final Cut Express and using a Canopus Model ADVC-55 converter.
    2. We have connected the Canopus ADVC-55 to the Toshiba DVD player using the Video IN Port, the Audio (L) In Port and the Audio IN Port.
    3. We have connected the correct power supply to the Canopus.
    4. We have connected the Canopus to the Apple Mac using the Firewire supplied (IEEE1394 six pin) (No.1 is switched on 2-6 switched off on the Canopus)
    5. We have opened FCE and using Easy Set Up we have selected DV-PAL Firewire Basic.
    6. We then switch on the Toshiba DVD Player.
    7. We then  select new project in Final Cut and the window shows "VRT OK".
    8. We then select "Capture Now" and a window opens and advises as follows:  "Waiting for Time Code",     Device must be in VTR mode, when device control is enabled.
    9. When we select " DV PAL DV Converter in Easy set up as suggested, We get a window reading,  "Preview disabled"  and "no connection.
    Anyone that can help please??

  • Waiting for Timecode device must be in VTR mode?

    Hi Alchroma,
    Thank you for replying but when I choose the option DV-PALConverter from the Easy Set Up Menu I get the message "no communication" ??
    Any suggestions???

    Duplicate post: https://discussions.apple.com/thread/4345287?tstart=0

  • Error Message: Waitng for Timecode

    I logged a number of clips and when I tried to batch capture them the tape was rewound, the time code on the camera was blank and I got a message stating: Waiting for Timecode. When I pressed the play button on the video camera it started and the capture began. Then it stopped and I had to press play again. Is there some setting in the preferences I should be looking at? Thanks.
    Amy

    This also happened when I tried to capture now. Once I pressed the play button on the camera the capture started.
    That's the way 'Capture Now' is supposed to work.
    But if you've logged the clips and it won't batch capture, then it sounds as though the timecode on the tape may be broken or bad.
    Try setting device control in FCP to "Non-Controllable Device" and use Capture Now.
    -DH

  • "Waiting for time code" while Capture Now

    My Sony DSC-TRV 460 (Hi 8 digital, not HD) camcorder (digital video output activated because the tape is an older, analog) is attached w/firewire. Click File > Capture. The capture window appears and its controls do control the camcorder and I can watch the tape w/audio there. According the Help, I set the tape a bit before I want to start, click Play (or spacebar), click Capture Now. This launches a big black window that says Final Cut Express w/Apple logo. At the bottom it says "hit escape to exit," "device must be in VTR mode" and "Waiting for time code." The same camcorder with the same settings brings video into iMovie HD with no problem so I could workaround that way. How to get FCE to do what I want, though?

    I've accomplished the task several times with my Sony Digital-8 camera. Since the tape is analog there's no timecode (which iMovie doesn't look for) and you must use the DV Converter setting in easy setup. I think you're right about the on-screen transport controls: you won't have them. (FCE thinks it's just listening to a converter box -- same as if you connected a VCR to the D8's analog ports, assuming the 460 offers that feature.) Try a reboot to clear things out. Turn on the camera then start FCE and check the Easy Setup settings. Use Capture Now and press the 'play' button on the camcorder.

  • Capturing DV/VHS while waiting for FCS 2

    After not doing any editing for years, am getting ready to buy a Mac Pro and would like to be able to begin bringing in useable footage from my DV and VHS archives.
    Would I be able to use iMovie for this task and have the footage in a format that will be useable by FCP 6, without a loss of quality?
    Or, should I just wait till early June for FCS 2?
    PS: am intending to buy an Intensity Pro card in May as well -- for capturing various formats. Not sure how that factors into the decisions.

    FCP Studio 2 is due in May. Wait for it. iMovie is never a good idea for capturing video to use in FCP:
    #20 Using iMovie to Capture for FCP edit
    Shane's Stock Answer #20:
    iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
    iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
    The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
    Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it...
    Shane

  • DVR Problem w/QIP7232P2 DVR Operation; HOW Long will I have to wait for 1.9.1?

    THE SHORT PROBLEM:
    1) DVR records only a few moments of pre-scheduled events then the recording stops with only 10 to 30 seconds stored content and this is reported in the on screen detail.
    2) DVR records a full 1 hour show however, after 20 or so minuets of playback, use of the fast forward, skip (to get around a commercial) or pause DVR functions will cause the playback to jump to the end and you can't see the rest of the story.  One must start the show over again, view stuff you have seen before to get to where the error happen.  If you fast forward too close to the point of the error, you will get dumped out of the show all over again.  Once you get close you just have to watch commercials and what you have seen before and then not use any DVR functions in order to watch the rest of the show.
    3) DVR records a full 1 hour show, you fast forward to a time that is say 50% into the show, the progress bar will move forward like normal to show you get close to the point of you stopped watching the show before (to help solve problem #2 above) BUT, if you go too far, the progress bar will jump back to the start of the show and you may be dumped out of the program or it may continue to move forward.  However the operation of the progress bar is not right.
    This would render the DVR less then useful.  Verizon has replaced my STB and talked me through the reset of AC power operation that is the normal fix for most STB issues.  I'm told this will require a software upgrade from 1.9 to 1.9.1.  OK, GET IT DONE and CREDIT USERS OF DVRs THE FEE PAID FOR SOMETHING THAT IS NOT WORKING.
    THE LONG STORY WITH DETAILS:
    All seemed to be well with the unit for a few months and the upgrade to the new 1.9 software looked like it went off without a hitch.
    But.....Starting on around 12/17/11 I noticed that my DVR was recording only about 10 to 30 seconds of programming during scheduled events.  Sometimes it would attempt to record the same event one or two times, each only lasting a few moments.  I called Verizon customer service I think on 12/20/11 and they asked me to pull the 120 volt power and then re-apply power.  This helped the problem but, remote testing seemed to show an issue and the customer rep decided a replacement unit was needed and Order No. MDDQ08V49U was created and another set-top box was shipped to me.
    It is too bad that the technology has been developed to allow the external storage of digital content however, one can't back the 200 plus hours of video one may have stored on a set-top box and restore it on a new unit.  It is also not possible to reproduce the vast extent of scheduling of events.  No, it seems when you change out a set top box, all the programming is gone and you have to spend an afternoon coping down the schedule from the Series Manager and then re-enter all new events by making new recording events; a very time consuming operation.
    So it is frustrating once after this afternoon is wasted reprogramming a new set-top is all done with the new set-top box installed, I find that on 1/5/12 when viewing recorded programming that should be one hour long, I only seem to get 22 minutes of playback.  I try to look at this in detail and see that the first 22 minutes indeed play back in a normal manor.  One is able to use the jump forward mode to skip over a commercial and all is good.  If after 22 minutes you don't do anything, playback will continue to the end of the 1 hour.  BUT, if after the first 22 minutes you try the skip or pause function, the program will jump to the end screen where you are given the option to: Program Options Page were you can select Play, Save until I delete, or Delete.
    On 1/4/12 I called Tech Support and asked what to do about this 2nd box having yet another DVR problem.  Once again I was asked to cycle the 120 volt AC power and disconnect and reconnect the coax "because electricity can build up in the set-top box".  (I thought that was a cute reason).  I asked the Customer Service rep if this was a Tier 2 or Tier 3 Troubleshooting method and she told me she was not authorized to tell me. 
    1/5/12 a Manager calls me back to follow up on a survey from the December service call and after seeing that I had a trouble ticket on 1/4 to see what is going on. He attempts to talk me into getting the on screen diagnostic screen to come up (press a mix of power and OK) but that just does not work like the old set-top box. We review the problem and he is not sure what else to do then send a Tech to the house to review the problems.  He did tell me the STB I had in December WAS a known bad number; something about an issue with ribbon cable fault going to the hard drive.  Well OK, but it seems ODD that the two like problems seem to happen to a known bad box and now to a new box that is not in the "bad" lot of numbers.  This new STB also had been running 1.9 like the old STB for some number of weeks/months without issue then BANG, a problem pops up!  It seems like this is a deeper problem but I trust with all the fact Verizon can find the right answer.
    1/6/12 Aaron Phelps, Cable Splicing Technician comes to look at the problem. Nice guy!  I show him the two recorded shows that have the problem.  He can't get the on-screen diagnostic up but we use the test via the Main Menu and all readings seem OK.  He also tests signals via an external meter with good results. 
    At last, he calls Tier 2 Tech support and I'm told by him that it seems some bug is in ver 1.9 and we will have to wait a month for a 1.9.1 to come out that should address a memory issue in the DVR.  I don't know is this is the real story but Aaron tells me the ONLY fix they have is to swap out STB and he has no other 7232 units so... I'd have to go back to a smaller hard-drive or wait a month to see what happens.
    To say again, it is a problem when the only answer in practice is to reboot the STB or replace it and this does not solve the problem.  The field Techs don't know about a software bug less they call tier 2 support.  Also, as it is so common to just replace the STB, the process may take only a moment in physical action to swap wires HOWEVER, it is an afternoon to get programming done so a new DVR is recording all the shows a Customer has established; on top of the time talking to phone Tech support and waiting for someone to show up to the home, that is a considerable investment in Consumer time.  If you can't back up the content with the local drive due to copyright issues how about a cloud approach? I'd encourage a known bug to be resolved quickly and perhaps solve the manor that a STB is backed-up and replaced.
    I learn on 1/6/12 my friend had like problems:
    xxxxxx address blocked
    Claire had the added problem that a pre set event she set to record change by an hour.  I've not seen this but, I see in the Forum URL below, another person had the same problem as reported by "DC-Videophile" on 01-01-12 at 08:33 PM.  On this same forum "rich3fan" reports problems that I have on 01-04-12 11:54 AM.  The very bad news would seem from "markjrenna" 01-04-12 09:29 PM where it is suggested that 1.9.1 will not be out before 1Q12!!!!  That is a long time to have this problem.
    http://www.avsforum.com/avs-vb/showthread.php?p=21441579#post21441579
    A Review of My Events W/ Problems:
    I did not record when the problems happen in December
    NCIS, channel 50, "Dog Tags" USA Recorded 1/5/2012 2:00 PM
    NCIS, Los Angeles; 50, USA Recorded 1/4/2012 7:00 PM
    NCIS, channel 50, "In the Zone" USA Recorded 1/6/2012 6:00 PM (after Tech visit to home)
    I notice with this event, when you hit fast forward, the progress bar moves forward with time then at a point it goes back to the start point, even when good video is playing in fast forward.  This program worked beyond 22 min then failed at maybe 38 min.  When I tried again, it failed at another point earlier (maybe 15 min) so it does not have a pattern.
    Leverage, channel 51, TNT, "The Gold Club" Recorded 1/7/2012 2:00 AM (after Tech visit to home)
    The Best Thing I Ever Ate, channel 164 Food Network, "Bang for the Buck" Recorded 1/6/2012 7:30 PM
    My Name Is Earl, channel 52 TBS, "Stole P's HD Cart", Recorded 1/7/2012 8:00 AM (after Tech visited to home)
    NCIS, channel 50 USA,"Internal Affairs" Recorded 1/6/2012 5:00 PM (after Tech visit to home)
    NCIS, channel 50 USA, "UnSEALed" Recorded 1/8/2012 11:00 AM (after Tech visit to home)
    and a lot more......... 

    I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
    It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
    All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
    Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
    If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
    Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
    I am going to be repsonding on a daily basis to keep this topic at the top of the list.
    Time to come clean. You will feel better Verizon.
    Let's talk tomorrow.

  • ITunes Match Unable To Get Past "Waiting for Apple to deliver your iTunes Match results..."

    Been trying for days but it just gets to "Waiting for Apple to deliver your iTunes Match results..." and then stops and allows me to press the Start button again to start the match process.  Sometimes I get error -3231.
    I've called Apple and they want $19 to solve the issue even though I paid the $25 for Match.
    I've turned iTunes Match off.  Turned Genius off.  Logged out of my iTunes account.  Quit iTunes.  Restarted. Logged back into iTunes account.  Turn Genius on.  Turn iTunes Match back on and let it go through the process again with no success.
    My library has a couple hundred songs less than the 25,000 max but it is pretty large.  Had the same issue when I tried with a smaller library some time ago.  I've created a new library and have the same issue.

    Hi,
    You should consider rebooting your internet router
    Then try holding option key whilst turning off match. Close iTunes and then reopen. Turn on iTunes Match and select add this computer.
    Jim

  • My dad made a mistake on purches on my ipad, and now he owes money he can't pay off right now. icloud wont work because o it, how can I get my icloud to work so i dont have to wait for him to pay itunes off???

    (we share a apple id) My dad bought some inapp  purchases, and he thought it didnt work. so he did it again. he can't pay it of right now, and icloud reuses to work on my new ipod. i cant just make a new id, all my music is on that. how can i get icloud to work, WITHOUT waiting for my dad?

    iCloud is free.

  • Error while loading a Cube in BW - "Waiting for Semaphore"

    Hello Experts:
    I seem to be having a frequent problem while doing a Delta load from BW (3.5) cube to exactly similar cube in BI 7.0.
    The load is done daily via a Process Chain. Before doing the Delta load, I also have a step to DELET Index from the
    cube in BI. The Delta loads have been successful but frequently they take about 7 or 8 hours to load. The number of
    records are not many 80,000 to 140,000 records range. There have been successful loads for similar range withing
    7 or 8 minutes. However, when it gets hung up it takes 7 or 8 hours.
    Looks like it is a Lock happening in 3.5 BW system. Tcode SM12 shows that it is locked and then in T. Code SM66, it
    shows that it is hun for resources..... The message inicated is "Waiting for Semaphore". After about 7 hours, the load
    automatically happens.
    This is causing issues becuase the upward data loads don't happen and Users can not access the data until late afternoon
    for their planning in BPC.
    Is there a way this error or Waiting for Semaphore be avoided or time is reduced....? How can I achieve this? Any
    fne tuning tricks anyone can suggest please......!!
    Thanks a lot in advance.

    Thanks to both of you....  ppreciate the feedback.  I guess, I will have to wait for the situation to arise again as today's delta went normally.  I will see if this happens again.  I am not sure whether the Semaphore number is same as the "Work Process Number" in SM66 (which was 3 in my case) or is it the Process ID (which is 22872082 in my case). 
    If I go to SM50, I shoudl find either the Process ID then.
    Would I be searching for the OSS notes corresponding to Process ID (in this case 22872082...? or would it for sempahore number (if it is different .... as I mentioned 3 in my case..?
    Could you please clarify which is Semaphore number and if it is same as the process ID I am talking about so that I can search for the right OSS notes.
    Also, finding all this will only tell me why it hung.... but is there a way we can make it kick off and not get stuck or I have to wait it out until the resources get released.....?  Which in my case then would stil be a wait for 6/7 hours!!
    Apreciate your feedback.
    Best.....  Lee

  • My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

    Hi all,
    Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
    Anyway,
    I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
    Mine doesn't.
    I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
    As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
    I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
    I have had this phone for several years and it has never done this.
    It worked absolutely fine, until I loaded the latest version of iTunes it seems...
    Any suggestions?
    Many thanks

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • Hp LaserJet P3015 printer "waiting for printer to become available" message

    Hello All,
    I have searched through many message boards about this issue (some steaming back to as far as 2009) and I have yet to find a solution that has worked for me.
    Background of situation:
    In my office we have a dozen iMacs and Networked hp LaserJet P3015 printers.  Most work perfectly fine with out issue.  We are currently running 10.8.4 OS.  There are a few issues that seem to be unique to users or types of iMacs.  1) Three brand new iMacs (the skinny ones that come without the CD drives) where showing a message prompting for the "printer operator group".  I have that setting turned off but reguardless I added the user accounts to the "printer operator group" as well as the "printer admin group".  After I did that the users started to recieve the message "waiting for printer to become avaible".  When this message appears it never printers (I left it for a 20 minute period to no avail).  I have tried a whole host of fixes with short term success but the issue keeps reoccuring.  Here is a list of fixes I have tried:
    What I have tried
    1) I plugged the iMac directly into the printer via USB cable to install the drivers locally
    2) I added the user to the printer operator group and the printer admin group
    3) I checked all settings on both the printer and computer
    4) I have removed and re-added the printer several ways (from the network and directly via UBS cable)
    5) I checked the Ethernet connection to the printer (all are fine) (also eliminated the need for it by directly plugging her in via USB cable)
    6) I have "power" shut down the printer
    7) I restarted the printer settings on the network to eliminate any lingering issues
    8) Made sure the software is up to date (which according to some message boards is what the problem is)
    9) I have replaced both the actual Computer and Printer (with another brand new iMac), while additionally creating a new user account to eliminate hardware and faulty user settings as the culprit, as well as plugged the printer directly into the computer and removed it from the network.
    10) I prayed to the IT gods
    Other Notes:
    I did see a solution from a message board that said to delete all "hp_" files in system/library/extensions and then directly plug the printer into the computer to install the drivers that way (which he said worked) but the guys also said that if he ran software update then the issue would re-occur.  This seems to be counter productive as I like to keep all software up to date
    What I have noticed:
    - The issue seems to affect the newer iMacs in my office more then the older machines despite everyone running the same OS version
    Thank you all so much in adavanced for your time reading my post.  The issue has been extremely frustrating for both me and the end users and I appreaciate any help that anyone can provide (even if its just pointing me in the direction of another message board)
    - Chris

    You have not mentioned it but based on some of the things that you have said, I would assume that the Mac's are bound to a domain. So, for one of these Mac's, if you logged on locally and then created a print queue to the network printer, do you get the same message?

  • HSDIO conditionally fetch hardware compare sample errors (script trigger to flag whether or not to wait for software trigger)

    I am moderately new to Labview and definitely new to the HSDIO platform, so my apologies if this is either impossible or silly!
    I am working on a system that consists of multiple PXI-6548 modules that are synchronized using T-CLK and I am using hardware compare.  The issue I have is that I need to be able to capture ALL the failing sample error locations from the hardware compare fetch VI... By ALL I mean potentially many, many more fails than the 4094 sample error depth present on the modules.
    My strategy has been to break up a large waveform into several subsets that are no larger than 4094 samples (to guarantee that I can't overflow the error FIFO) and then fetch the errors for each block.  After the fetch is complete I send a software reference trigger that is subsequently exported to a scriptTrigger that tells the hardware it is OK to proceed (I do this because my fetch routine is in a while loop and Labview says that the "repeated capbility has not yet been defined" if I try to use a software script trigger in a loop).
    This works fine, but it is also conceivable that I could have 0 errors in 4094 samples.  In such a case what I would like to do is to skip the fetching of the hardware compare errors (since there aren't any) and immediately begin the generation of the next block of the waveform.  That is, skip the time where I have to wait for a software trigger.
    I tried to do this by exporting the sample error event to a PFI and looping that PFI back in to generate a script trigger.  What I thought would happen was that the script trigger would get asserted (and stay asserted) if there was ever a sample error in a block, then I could clear the script trigger in my script.  However, in debug I ended up exporting this script trigger back out again and saw that it was only lasting for a few hundred nanoseconds (in a case where there was only 1 injected sample error)... The sample error event shows up as a 1-sample wide pulse.
    So, my question is this:  is there a way to set a flag to indicate that at least one sample error occurred in a given block  that will persist until I clear it in my script?  What I want to do is below...
    generate wfmA subset (0, 4094)
    if scriptTrigger1
      clear scriptTrigger1
      wait until scriptTrigger0
    end 
    clear scriptTrigger0
    generate wfmA subset (4094, 4094)
    I want scriptTrigger1 to be asserted only if there was a sample error in any block of 4094 and it needs to stay asserted until it is cleared in the script.  scriptTrigger0 is the software trigger that will be sent only if a fetch is performed.  Again, the goal being that if there were no sample errors in a block, the waiting for scriptTrigger0 will not occur.
    I am probably going about it all wrong (obviously since it doesn't work), so any help would be much appreciated!

    Please disregard most of my previous post... after some more debug work today I have been able to achieve the desired effect at slower frequencies.  I did straighten out my script too:
    generate wfmA
    if scriptTrigger1
      clear scriptTrigger0
      wait until scriptTrigger0
    end if
    generate wfmA
    scriptTrigger1 = sample error event flag
    scriptTrigger0 = software trigger (finished fetching error backlog in SW)
    However, I am still having a related issue.
    I am exporting the Sample Error Event to a PFI line, looping that back in on another PFI line, and having the incoming version of the Sample Error Event generate a script trigger.  My stimulus has a single injected sample error for debug. For additional debug I am exporting the script trigger to yet another PFI; I have the sample error event PFI and the script trigger PFI hooked up to a scope.
    If I run the sample clock rate less than ~133MHz everything works... I can see the sample error event pulse high for one clock period and the script trigger stays around until it is consumed by my script's if statement.
    Once I go faster than that I am seeing that the script trigger catches the sample error event occasionally.  The faster I go, the less often it is caught.  If I widen out the error to be 2 samples wide then it will work every time even at 200MHz.
    I have tried PFI0-3 and the PXI lines as the output terminal for the sample error event and they all have the same result (this implies the load from the scope isn't the cause).
    I don't know what else to try?  I can't over sample my waveform because I need to run a true 200MHz. I don't see anything that would give me any other control over the sample error event in terms of its pulsewidth or how to export it directly to a script trigger instead of how I'm doing it.
    Any other ideas?

  • What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple. We want to host the app elsewhere. How do we host our DPS app on our client's website?

    What is a quick alternative to launching an enterprise DPS app if Apple Store rejects the App? We are under a major deadline and can't wait for Apple to approve. We want to host the app elsewhere. How do we host our DPS app on our client's website? Thanks.

    Unless I misunderstand the question, you can't do what you're asking to do. Apple doesn't allow you to bypass their store and host public apps on a website. The exception is an enterprise app, which requires an Enterprise account with both Apple and Adobe. This type of enterprise app can be distributed only within the company. If that's what you want to do, you can learn more here:
    Digital Publishing Suite Help | Creating viewer apps for private distribution
    Distributing enterprise iOS viewer applications with Digital Publishing Suite | Adobe Developer Connection
    Another option is to add the development app to several devices and use those for your demo.

  • Problem description: My computer is running very slow ever since I switched to Yosemite.  I get the multicolored wheel just opening my browser at times and waiting for a page to open, or an application.  Any ideas other than rebooting my computer to

    Problem description:
    My computer is running very slow ever since I switched to Yosemite.  I get the multicolored wheel just opening my browser at times and waiting for a page to open, or an application.  Any ideas other than rebooting my computer to get the problem to alleviate for a few days?
    EtreCheck version: 2.1.8 (121)
    Report generated February 16, 2015 at 2:35:55 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Late 2009) (Technical Specifications)
        iMac - model: iMac10,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                Empty  
            BANK 1/DIMM0
                Empty  
            BANK 0/DIMM1
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 9400 - VRAM: 256 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 11 days 19:34:2
    Disk Information: ℹ️
        ST3500418ASQ disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 60.76 GB (15.30 GB free)
            Macintosh HD (disk1) / : 438.11 GB (351.62 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 438.49 GB Online
        HL-DT-ST DVDRW  GA11N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Internal Memory Card Reader
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
        hp officejet 4200 series
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.accountsd.plist
        [killed]    com.apple.AirPlayUIAgent.plist
        [killed]    com.apple.bird.plist
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cloudd.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.coreservices.uiagent.plist
        [killed]    com.apple.EscrowSecurityAlert.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.pluginkit.pkd.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.recentsd.plist
        [killed]    com.apple.secd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        [killed]    com.apple.spindump_agent.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        19 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.coresymbolicationd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.diagnosticd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.iconservices.iconservicesagent.plist
        [killed]    com.apple.iconservices.iconservicesd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.periodic-monthly.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.sandboxd.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.spindump.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    com.apple.xpc.smd.plist
        20 processes killed due to memory pressure
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [running]    com.GoodShop.updater.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 5.2 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.4.2.4 [Click for support]
        RealPlayer Plugin: Version: Unknown [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        DivXBrowserPlugin: Version: 2.0 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0
        googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.79 [Click for support]
        VSeeHelper: Version: VSeeHelper 1.0.0.0 - SDK 10.8 [Click for support]
    Safari Extensions: ℹ️
        avast! Online Security
        Goodshop app
    3rd Party Preference Panes: ℹ️
        DivX  [Click for support]
        Flip4Mac WMV  [Click for support]
        MacFUSE  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 438.11 GB Disk used: 86.50 GB
        Destinations:
            Backup [Local]
            Total size: 159.70 GB
            Total number of backups: 3
            Oldest backup: 2014-11-24 05:20:18 +0000
            Last backup: 2015-02-01 03:04:02 +0000
            Size of backup disk: Too small
                Backup size 159.70 GB < (Disk used 86.50 GB X 3)
    Top Processes by CPU: ℹ️
             8%    WindowServer
             5%    DashboardClient
             3%    mds
             2%    launchd
             0%    ocspd
    Top Processes by Memory: ℹ️
        64 MB    WindowServer
        52 MB    thunderbird
        34 MB    mds
        34 MB    Mail
        30 MB    mds_stores
    Virtual Memory Information: ℹ️
        654 MB    Free RAM
        834 MB    Active RAM
        777 MB    Inactive RAM
        903 MB    Wired RAM
        102.49 GB    Page-ins
        1.46 GB    Page-outs
    Diagnostics Information: ℹ️
        Standard users cannot read /Library/Logs/DiagnosticReports.
        Run as an administrator account to see more information.

    Hi Linc!  Sorry for the delay.  Here is the information:
    Start time: 16:48:08 02/28/15
    Revision: 1241
    Model Identifier: iMac10,1
    System Version: OS X 10.10.2 (14C109)
    Kernel Version: Darwin 14.1.0
    Time since boot: 10 days 21:04
    UID: 502
    SerialATA
        ST*******ASQ                          
    USB
        officejet 4200 series (Hewlett Packard)
    Bluetooth
        Apple Wireless Mouse
    FileVault 2: On FileVault master keychain appears to be installed
    FileVault 1: On
    I/O wait time (ms/s)
        launchd (UID 0): 53
    Font issues: 40
    Firewall: On
    System caches/logs
        1987 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
    Diagnostic reports
        2015-01-31 SecurityAgent crash
        2015-02-01 2BUA8C4S2C.com.agilebits.onepassword4-helper crash
        2015-02-01 IMDPersistenceAgent crash
        2015-02-01 secd crash
        2015-02-20 Inkjet7 crash
        2015-02-28 IMDPersistenceAgent crash
        2015-02-28 secd crash x2
    Kernel log
        Feb 23 07:06:08 Failed to get hibernate image filename
        Feb 23 17:07:05 Failed to get hibernate image filename
        Feb 24 07:06:05 Failed to get hibernate image filename
        Feb 24 17:47:13 Failed to get hibernate image filename
        Feb 24 18:31:50 IOAudioStream[0xffffff802df40400]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
        Feb 24 19:14:41 Failed to get hibernate image filename
        Feb 24 20:56:40 Failed to get hibernate image filename
        Feb 24 22:14:14 Failed to get hibernate image filename
        Feb 24 22:38:31 Failed to get hibernate image filename
        Feb 25 06:58:23 Failed to get hibernate image filename
        Feb 25 17:40:53 Failed to get hibernate image filename
        Feb 25 21:04:27 Failed to get hibernate image filename
        Feb 25 21:31:52 Failed to get hibernate image filename
        Feb 26 07:03:06 Failed to get hibernate image filename
        Feb 26 17:06:59 Failed to get hibernate image filename
        Feb 27 06:58:56 Failed to get hibernate image filename
        Feb 27 17:02:56 Failed to get hibernate image filename
        Feb 27 19:17:20 Failed to get hibernate image filename
        Feb 27 23:04:12 Failed to get hibernate image filename
        Feb 28 10:09:19 Failed to get hibernate image filename
        Feb 28 13:07:21 Failed to get hibernate image filename
        Feb 28 14:08:38 Failed to get hibernate image filename
        Feb 28 15:11:16 Failed to get hibernate image filename
        Feb 28 16:18:21 msdosfs_fat_uninit_vol: error 6 from msdosfs_fat_cache_flush
        Feb 28 16:29:32 Failed to get hibernate image filename
    System log
            label = "2.5.4.3";
            "localized label" = "2.5.4.3";
            type = string;
            value = "courier.sandbox.push.apple.com";
        Feb 28 16:30:55 loginwindow ERROR | __50-[MCXDLauncher(Private) startNetworkChangeThread:]_block_invoke | Unable to GetMCXAgentPort
        Feb 28 16:31:09 apsd Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[8424]
        Feb 28 16:31:44 apsd Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[8433]
        Feb 28 16:32:36 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
        Feb 28 16:34:16 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
        Feb 28 16:38:37 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "1Password mini" for over 1.00 seconds. Server has re-enabled them.
        Feb 28 16:38:49 WindowServer WSGetSurfaceInWindow : Invalid surface 769181205 for window 4518
        Feb 28 16:38:49 WindowServer WSGetSurfaceInWindow : Invalid surface 769181205 for window 4518
        Feb 28 16:38:56 WindowServer WSGetSurfaceInWindow : Invalid surface 1023641180 for window 4522
        Feb 28 16:38:56 WindowServer WSGetSurfaceInWindow : Invalid surface 1023641180 for window 4522
        Feb 28 16:39:06 WindowServer WSGetSurfaceInWindow : Invalid surface 1058035653 for window 4525
        Feb 28 16:39:06 WindowServer WSGetSurfaceInWindow : Invalid surface 1058035653 for window 4525
        Feb 28 16:39:22 WindowServer WSGetSurfaceInWindow : Invalid surface 996085260 for window 4530
        Feb 28 16:39:22 WindowServer WSGetSurfaceInWindow : Invalid surface 996085260 for window 4530
        Feb 28 16:39:33 WindowServer WSGetSurfaceInWindow : Invalid surface 1034343505 for window 4534
        Feb 28 16:39:33 WindowServer WSGetSurfaceInWindow : Invalid surface 1034343505 for window 4534
        Feb 28 16:39:39 Google Chrome Helper CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
        Feb 28 16:39:39 Google Chrome Helper CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
        Feb 28 16:46:20 apsd Failed entitlement check 'com.apple.private.aps-connection-initiate' for ManagedClientAgent[8979]
        Feb 28 16:49:02 loginwindow ERROR | __50-[MCXDLauncher(Private) startNetworkChangeThread:]_block_invoke | Unable to GetMCXAgentPort
    Daemons
        com.apple.AccountPolicyHelper
        com.apple.AssetCacheLocatorService
        com.apple.CodeSigningHelper
        com.apple.MobileFileIntegrity
        com.apple.awdd
        com.apple.backupd-auto
        com.apple.cache_delete
        com.apple.coresymbolicationd
        com.apple.ctkd
        com.apple.diagnosticd
        com.apple.emond.aslmanager
        com.apple.iconservices.iconservicesagent
        com.apple.iconservices.iconservicesd
        com.apple.ifdreader
        com.apple.installd
        com.apple.installer.osmessagetracing
        com.apple.nehelper
        com.apple.networkd_privileged
        com.apple.nsurlsessiond_privileged
        com.apple.nsurlstoraged
        com.apple.periodic-daily
        com.apple.periodic-monthly
        com.apple.periodic-weekly
        com.apple.sandboxd
        com.apple.secinitd
        com.apple.security.syspolicy
        - status: -15
        com.apple.softwareupdate_download_service
        com.apple.softwareupdated
        com.apple.spindump
        com.apple.sysmond
        com.apple.systemstatsd
        com.apple.tccd.system
        com.apple.watchdogd
        com.apple.wdhelper
        org.cups.cupsd
    Agents
        2BUA8C4S2C.com.agilebits.onepassword4-helper
        com.adobe.ARM.UUID
        com.apple.AirPortBaseStationAgent
        com.apple.imdpersistence.IMDPersistenceAgent
        - status: -10
        com.apple.secd
        - status: -10
    User crontab
        59 16 * * 7 /Applications/MacScan\ 2/MacScan.app/Contents/MacOS/MacScan -autoscan YES
    Firefox extensions
        Mozilla Firefox hotfix
    Widgets
        iCal
    iCloud errors
        cloudd 7
        comapple.InputMethodKit.UserDictionary 2
        CallHistorySyncHelper 1
    Continuity errors
        sharingd 1
    Restricted files: 174
    Lockfiles: 30
    High file counts
        Desktop: 54
    Accessibility
        Scroll Zoom: On
    Contents of /System/Library/Security/authorization.plist
        - mod date: Oct  9 02:17:00 2014
        - checksum: 2720110640
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 1850 more line(s)
    Contents of /private/etc/authorization.deprecated
        - mod date: Oct 25 13:37:39 2014
        - checksum: 842352627
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>comment</key>
        <string>The name of the requested right is matched against the keys.  An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
        allow rule: this is always allowed
        &lt;key&gt;com.apple.TestApp.benign&lt;/key&gt;
        &lt;string&gt;allow&lt;/string&gt;
        deny rule: this is always denied
        &lt;key&gt;com.apple.TestApp.dangerous&lt;/key&gt;
        &lt;string&gt;deny&lt;/string&gt;
        user rule: successful authentication as a user in the specified group(5) allows the associated right.
        The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
        The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
        The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0.  This defaults to false if not specified.
        See remaining rules for examples.
        </string>
        <key>rights</key>
        <dict>
        <key></key>
        <dict>
        <key>class</key>
        <string>rule</string>
        <key>comment</key>
        ...and 1013 more line(s)
    Contents of /private/etc/pam.d/prl_disp_service
        - mod date: Mar  5 03:24:01 2010
        - checksum: 1160556194
        auth       required       pam_nologin.so
        auth       optional       pam_afpmount.so
        auth       sufficient     pam_securityserver.so nullok
        auth       sufficient     pam_unix.so  nullok
        auth       required       pam_deny.so
        account    required       pam_permit.so
        password   required       pam_deny.so
        session    required       pam_permit.so
        session    optional       pam_afpmount.so
    Contents of /private/etc/pam.d/prl_disp_service.snow_leopard
        - mod date: Mar  5 03:24:01 2010
        - checksum: 2633576920
        auth       optional       pam_krb5.so
        auth       optional       pam_mount.so
        auth       sufficient     pam_serialnumber.so serverinstall legacy
        auth       required       pam_opendirectory.so
        account    required       pam_nologin.so
        account    required       pam_opendirectory.so
        password   required       pam_deny.so
        session    required       pam_launchd.so
        session    required       pam_uwtmp.so
        session    optional       pam_mount.so
        auth       optional       pam_krb5.so
        auth       optional       pam_mount.so
        auth       sufficient     pam_serialnumber.so serverinstall legacy
        auth       required       pam_opendirectory.so
        account    required       pam_nologin.so
        account    required       pam_opendirectory.so
        password   required       pam_deny.so
        session    required       pam_launchd.so
        session    required       pam_uwtmp.so
        session    optional       pam_mount.so
    Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
        - mod date: Aug  1 17:37:19 2012
        - checksum: 408149527
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.adobe.ARM.UUID</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StartInterval</key>
        <integer>12600</integer>
        </dict>
        </plist>
    Applications
        /Applications/Acrobat 6.0 Professional/Acrobat 6.0.2 Professional.app
        - N/A
        /Applications/Acrobat 6.0 Professional/Acrobat Distiller 6.0.2.app
        - com.adobe.distiller
        /Applications/Adobe/Acrobat.com.app
        - com.adobe.mauby.UUID.1
        /Applications/Adobe/Adobe Help.app
        - chc.UUID.1
        /Applications/Bible Explorer 4.app
        - com.BE8.wordsearchbible.corp
        /Applications/DivX Converter.app
        - N/A
        /Applications/DivX Player.app
        - com.divx.DivX_Player
        /Applications/DivX/DivX Community.app
        - com.spritec.DVD
        /Applications/DivX/DivX Products.app
        - com.spritec.DVD
        /Applications/DivX/DivX Support.app
        - com.spritec.DVD
        /Applications/DivX/Uninstall DivX for Mac.app
        - com.divxinc.uninstalldivxformac
        /Applications/FOX News Live.app
        - FoxPlayerAIR.UUID.1
        /Applications/Flip4Mac/WMV Player.app
        - net.telestream.wmv.player
        /Applications/Garmin Express.app
        - com.garmin.renu.client
        /Applications/Garmin WebUpdater.app
        - com.garmin.WebUpdater
        /Applications/Hewlett-Packard/HP Image Edit.app
        - com.hp.hpimageedit
        /Applications/Hewlett-Packard/HP Image Print.app
        - com.hp.photo.imageprint
        /Applications/Hewlett-Packard/HP Image Zone.app
        - com.hp.imagezone
        /Applications/Hewlett-Packard/HP Instant Share.app
        - com.hp.photo.instantshare
        /Applications/Hewlett-Packard/HP Panorama Stitching.app
        - com.hp.PanoramaStitching
        /Applications/Hewlett-Packard/HP Photo and Imaging Software/HP E-mail Portal/HP E-mail Portal
        - N/A
        /Applications/Hewlett-Packard/HP Photo and Imaging Software/HP Photo and Imaging Director/Director Docker.app
        - com.hp.director.docker
        /Applications/Hewlett-Packard/HP Software Update.app
        - com.hp.softwareupdate
        /Applications/Hewlett-Packard/HP Uninstaller
        - N/A
        /Applications/Karaoke Maker/Audacity.app
        - net.sourceforge.audacity
        /Applications/Macromedia Studio 8/Macromedia Contribute 3/Contribute
        - com.macromedia.Contribute
        /Applications/Macromedia Studio 8/Macromedia Contribute 3/Contribute/Contents/MacOS/Contribute
        - N/A
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8
        - com.macromedia.Dreamweaver
        /Applications/Macromedia Studio 8/Macromedia Extension Manager/Extension Manager.app
        - com.macromedia.ExtensionManager
        /Applications/Macromedia Studio 8/Macromedia Fireworks 8/Fireworks 8.app
        - com.macromedia.fireworks
        /Applications/Macromedia Studio 8/Macromedia Flash 8 VideoEncoder/Flash 8 Video Encoder.app
        - com.macromedia.FLVEncoder
        /Applications/Macromedia Studio 8/Macromedia Flash 8/Flash 8.app
        - com.macromedia.flash.8
        /Applications/Microsoft AutoUpdate.app
        - com.microsoft.autoupdate
        /Applications/Microsoft Office 2004/Additional Tools/Handheld Sync Installer
        - com.MindVision.VISEX
        /Applications/Microsoft Office 2004/Additional Tools/Handheld Sync Installer/Contents/MacOSClassic/Handheld Sync Installer
        - N/A
        /Applications/Microsoft Office 2004/Additional Tools/Microsoft Language Register/Microsoft Language Register
        - N/A
        /Applications/Microsoft Office 2004/Additional Tools/Remote Desktop Connection/Remote Desktop Connection
        - N/A
        /Applications/Microsoft Office 2004/Additional Tools/Remove Office/Remove Office
        - N/A
        /Applications/Microsoft Office 2004/Additional Tools/Windows Media Installer
        - N/A
        /Applications/Microsoft Office 2004/Additional Tools/Windows Media Installer/Contents/MacOS/Windows Media Installer
        - N/A
        /Applications/Microsoft Office 2004/MSN Messenger.app
        - Microsoft/com.microsoft.Messenger
        /Applications/Microsoft Office 2004/Microsoft Entourage
        - N/A
        /Applications/Microsoft Office 2004/Microsoft Excel
        - N/A
        /Applications/Microsoft Office 2004/Microsoft PowerPoint
        - N/A
        /Applications/Microsoft Office 2004/Microsoft Word
        - N/A
        /Applications/Microsoft Office 2004/Office/Alerts Daemon.app
        - Microsoft/com.microsoft.AlertsDaemon
        /Applications/Microsoft Office 2004/Office/Database Utility
        - N/A
        /Applications/Microsoft Office 2004/Office/Equation Editor
        - N/A
        /Applications/Microsoft Office 2004/Office/Microsoft Cert Manager.app
        - com.microsoft.certmgr
        /Applications/Microsoft Office 2004/Office/Microsoft Clip Gallery
        - N/A
        /Applications/Microsoft Office 2004/Office/Microsoft Database Daemon
        - N/A
        /Applications/Microsoft Office 2004/Office/Microsoft Error Reporting.app
        - com.microsoft.error_reporting
        /Applications/Microsoft Office 2004/Office/Microsoft Graph
        - N/A
        /Applications/Microsoft Office 2004/Office/Microsoft Office Notifications
        - N/A
        /Applications/Microsoft Office 2004/Office/Microsoft Query
        - N/A
        /Applications/Microsoft Office 2004/Office/Microsoft Sync Services.app
        - com.microsoft.entourage.syncservices
        /Applications/Microsoft Office 2004/Office/Organization Chart
        - N/A
        /Applications/Microsoft Office 2004/Office/Project Gallery Launcher
        - N/A
        /Applications/Open XML Converter.app
        - com.microsoft.OfficeConverter
        /Applications/OpenOffice.app
        - org.openoffice.script
        /Applications/Quicken 2007/Quicken 2007
        - com.intuit.quicken
        /Applications/Quicken 2007/Quicken 2007/Contents/MacOS/Quicken 2007
        - N/A
        /Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Emergency Records Organizer
        - com.intuit.ero
        /Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Emergency Records Organizer/Contents/MacOSClassic/Emergency Records Organizer
        - N/A
        /Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Home Inventory.app
        - com.intuit.HomeInventory
        /Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Quicken Backup Utility.app
        - com.intuit.quicken.dotmac
        /Applications/Quicken 2007/Quicken 2007/Contents/SupportApps/Quicken Scheduler
        - N/A
        /Applications/RealPlayer Converter.app
        - com.real.converter
        /Applications/RealPlayer.app
        - com.RealNetworks.RealPlayer
        /Applications/TorBrowser.app
        - N/A
        /Applications/Utilities/Adobe AIR Application Installer.app
        - com.adobe.air.ApplicationInstaller
        /Applications/Utilities/Adobe Utilities.localized/Adobe Updater6/Adobe Updater.app
        - "com.Adobe.ESD.AdobeUpdaterApplication"
        /Library/Application Support/Adobe/AdobePDF.app
        - com.Adobe.print.AdobePDF.bef
        /Library/Application Support/DivX/DivXUpdater.app
        - com.divx.DivXUpdater
        /Library/Application Support/Hewlett-Packard/Software Update/HP Rules Processor.app
        - com.hp.rulesprocessor
        /Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app
        - com.hp.HPScheduler
        /Library/Application Support/Hewlett-Packard/Software Update/HP Software Updater
        - N/A
        /Library/Application Support/Hewlett-Packard/Software Update/HP Software Updater/Contents/MacOS/HP Software Updater
        - N/A
        /Library/Application Support/Microsoft/HV1.0/Microsoft Help Viewer.app
        - com.microsoft.helpviewer
        /Library/Application Support/Microsoft/Office Converter Support/Open XML for Charts.app
        - com.microsoft.openxml.chartconverter.app
        /Library/Application Support/Microsoft/Office Converter Support/Open XML for Excel.app
        - com.microsoft.openxml.excel.app
        /Library/Application Support/Microsoft/Office Converter Support/Open XML for Word.app
        - com.microsoft.openxml.word.app
        /Library/Application Support/Microsoft/Office Converter Support/pptfc.app
        - com.microsoft.openxml.powerpoint.app
        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
        - com.microsoft.silverlight.sllauncher
        /Library/Application Support/Script Editor/Templates/Cocoa-AppleScript Applet.app
        - com.apple.ScriptEditor.id.cocoa-applet-template
        /Library/Application Support/Script Editor/Templates/Droplets/Droplet with Settable Properties.app
        - com.apple.ScriptEditor.id.droplet-with-settable-properties-template
        /Library/Application Support/Script Editor/Templates/Droplets/Recursive File Processing Droplet.app
        - com.apple.ScriptEditor.id.file-processing-droplet-template
        /Library/Application Support/Script Editor/Templates/Droplets/Recursive Image File Processing Droplet.app
        - com.apple.ScriptEditor.id.image-file-processing-droplet-template
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/flashplayer
        - N/A
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_burn_cd.app
        - N/A
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_export_images.app
        - N/A
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_import_images.app
        - N/A
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_panorama_stitch.app
        - N/A
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_use_folders.app
        - N/A
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_use_image_edit.app
        - N/A
        /Library/Documentation/Help/HP Photo and Imaging Help/shrd/fscommand/c_use_image_print.app
        - N/A
        /Library/Documentation/User Guides and Information.localized/Apple Hardware Test Read Me.app
        - com.apple.AppleHardwareTestReadMe
        /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Adobe AIR Application Installer.app
        - com.adobe.air.ApplicationInstaller
        /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Template.app
        - com.adobe.air.Template
        /Library/Image Capture/Scripts/Import and View with iPhoto.app
        - com.hp.iPhoto.icautotask
        /Library/Parallels/Parallels Mounter.app
        - com.parallels.server.mounter
        /Library/Printers/hp/Fax/fax.backend
        - com.hp.fax
        /Library/Printers/hp/Fax/rastertofax.filter
        - com.hp.rastertofax
        /Library/Printers/hp/cups/filters/commandtohp.filter
        - com.hp.print.cups.filter.commandtohp
        /Library/Printers/hp/cups/filters/pdftopdf.filter
        - com.hp.print.cups.filter.pdftopdf
        /Library/Printers/hp/cups/tools/autosetup.tool
        - com.hp.print.autosetup
        /Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_bepbmhgboaologfdajaanbcjmnhjmhfn/Default bepbmhgboaologfdajaanbcjmnhjmhfn.app
        - com.google.Chrome.app.Default-bepbmhgboaologfdajaanbcjmnhjmhfn-internal
        /Users/USER/Library/Application Support/Google/Chrome/Default/Web Applications/_crx_blpcfgokakmgnkcojhhkbfbldkacnbeo/Default blpcfgokakmgnkcojhhkbfbldkacnbeo.app
        - com.google.Chrome.app.Default-blpcfgokakmgnkcojhhkbfbldkacnbeo-internal
        /Users/USER/Library/Caches/com.adobe.Reader.ARM/UUID/Adobe Reader Updater.app
        - com.adobe.ARM
        /mike's old computer/Adobe/AdobePDF.app
        - com.Adobe.print.AdobePDF.bef
        /mike's old computer/Adobe/Installers/R2/Setup.app
        - com.adobe.Installers.Setup
        /mike's old computer/Deimos Rising/Deimos Rising
        - N/A
        /mike's old computer/IA_Installers/TypingMaster_for_Mac/TypingMasterMac.app
        - N/A
        /mike's old computer/TypingMasterMac/UninstallerData/Uninstall TypingMaster for Mac.app
        - N/A
        /mike's old computer/TypingMasterMac/itutoreng.app
        - N/A
        /mike's old computer/adobe applications/Adobe GoLive CS/Adobe GoLive CS.app
        - com.adobe.GoLive
        /mike's old computer/adobe applications/Adobe Illustrator CS/2.app
        - com.adobe.illustrator
        /mike's old computer/adobe applications/Adobe InDesign CS/InDesign CS.app
        - com.adobe.InDesign
        /mike's old computer/adobe applications/Adobe InDesign CS/Plug-Ins/Online/AUMLibrary.cfm/Contents/SharedSupport/Adobe Update Manager.app
        - com.adobe.ESD.AUM
        /mike's old computer/adobe applications/Adobe Photoshop CS/Adobe ImageReady CS.app
        - com.adobe.ImageReady
        /mike's old computer/adobe applications/Adobe Photoshop CS/Adobe Photoshop CS.app
        - com.adobe.Photoshop
        /mike's old computer/adobe applications/Adobe Version Cue/Uninstall Adobe Version Cue.app
        - N/A
        /old computer stuff/At Ease Setup Folder/At Ease Setup
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Apple System Profiler
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Calculator
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Chooser
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/FaxStatus
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Graphing Calculator
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Internet Access/Browse the Internet
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Internet Access/Connect To...
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Internet Access/Mail
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Key Caps
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Note Pad
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Remote Access Status
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Scrapbook
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Sherlock
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/SimpleSound
        - N/A
        /old computer stuff/OLDIESystem Folder/Apple Menu Items/Stickies
        - N/A
        /old computer stuff/OLDIESystem Folder/Application Support/IntelliTools/Classic Sending Helper
        - N/A
        /old computer stuff/OLDIESystem Folder/Application Support/Norton AntiVirus ƒ/NAV Small Scanner
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Appearance
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Apple Menu Options
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/AppleTalk
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/ColorSync
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Configuration Manager
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Control Strip
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Date & Time
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/DialAssist
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Energy Saver
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Extensions Manager
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/File Exchange
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/File Sharing
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/General Controls
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Infrared
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Internet
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Keyboard
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Location Manager
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Memory
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Microsoft Office Manager
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Modem
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Monitors & Sound
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Mouse
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Numbers
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/QuickTime™ Settings:™ Settings:
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/QuikSync
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Remote Access
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Speech
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Startup Disk
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/TCP:IP
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Text
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Users & Groups
        - N/A
        /old computer stuff/OLDIESystem Folder/Control Panels/Web Sharing
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Application Switcher
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/ColorSync Extension
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Control Strip Extension
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Desktop PrintMonitor
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Desktop Printer Spooler
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/FBC Indexing Scheduler
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/FaxMonitor
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Find/Find by Content Indexing
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Folder Actions
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Norton Scheduler
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/PrintMonitor
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Time Synchronizer
        - N/A
        /old computer stuff/OLDIESystem Folder/Extensions/Web Sharing Extension
        - N/A
        /old computer stuff/OLDIESystem Folder/Help/Apple Help Viewer/Help Viewer
        - N/A
        /old computer stuff/OLDIESystem Folder/MacTCP DNR
        - N/A
        /old computer stuff/OLDIESystem Folder/Scripting Additions/Desktop Printer Manager
        - N/A
        /old computer stuff/OLDIESystem Folder/Scripting Additions/Network Setup Scripting
        - N/A
        /old computer stuff/OLDIESystem Folder/Scripting Additions/URL Access Scripting
        - N/A
        /old computer stuff/OLDIESystem Folder/System Extensions (Disabled)/AOL 5.0 Backup Installer
        - N/A
        /old computer stuff/Tony Hawk's Pro Skater 4/Tony Hawk's Pro Skater 4.app
        - com.aspyr.thps4
    Frameworks
        /Library/Frameworks/Adobe AIR.framework
        - com.adobe.AIR
        /Library/Frameworks/DivX Toolkit.framework
        - com.divx.divxtoolkit
        /Library/Frameworks/EWSMac.framework
        - com.eSellerate.EWSMac67108868
        /Library/Frameworks/HPSmartPrint.framework
        - com.hp.print.HPSmartPrint
        /Library/Frameworks/MacFUSE.framework
        - com.google.MacFUSE
        /Library/Frameworks/PrintMeSSL.framework
        - com.efi.printme.ssl
        /Library/Frameworks/TSLicense.framework
        - net.telestream.license
    PrefPane
        /Library/PreferencePanes/DivX.prefPane
        - com.divx.divxprefs
        /Library/PreferencePanes/Flip4Mac WMV.prefPane
        - net.telestream.wmv.prefpane
        /Library/PreferencePanes/MacFUSE.prefPane
        - com.google.MacFUSE
    Bundles
        /Library/Audio/MIDI Drivers/EmagicUSBMIDIDriver.plugin
        - info.emagic.driver.unitor
        /Library/Contextual Menu Items/ParallelsCM.plugin
        - com.parallels.cmplugin
        /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/AdobeCP15.plugin
        - com.adobe.adobecp
        /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Flash Player.plugin
        - com.macromedia.FlashPlayer-10.6.plugin
        /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/adobecp.plugin
        - com.adobe.adobecp20
        /Library/Internet Plug-Ins/AdobePDFViewer.plugin
        - com.adobe.acrobat.pdfviewer
        /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
        - com.adobe.acrobat.pdfviewerNPAPI
        /Library/Internet Plug-Ins/DivXBrowserPlugin.plugin
        - com.divx.DivXBrowserPlugin
        /Library/Internet Plug-Ins/Flip4Mac WMV Plugin.plugin
        - net.telestream.wmv.plugin
        /Library/Internet Plug-Ins/GarminGpsControl.plugin
        - com.garmin.GarminGpsControl
        /Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
        - com.Google.GoogleEarthPlugin.plugin
        /Library/Internet Plug-Ins/Silverlight.plugin
        - com.microsoft.SilverlightPlugin
        /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
        - com.google.googletalkbrowserplugin
        /Library/Internet Plug-Ins/iPhotoPhotocast.plugin
        - com.apple.plugin.iPhotoPhotocast
        /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
        - com.google.o1dbrowserplugin
        /Library/Printers/Macromedia/PDEs/FlashPaperPDE.plugin
        - com.macromedia.flashpaper.pde.FlashPaperPDE
        /Library/Printers/PPD Plugins/AdobePDFPDE.plugin
        - com.Adobe.print.AdobePDF.pde
        /Library/QuickLook/GBQLGenerator.qlgenerator
        - com.apple.garageband.quicklookgenerator
        /Library/QuickLook/ParallelsQL.qlgenerator
        - com.parellels.quicklookgenerator
        /Library/Spotlight/GBSpotlightImporter.mdimporter
        - com.apple.garageband.spotlightimporter
        /Library/Spotlight/Microsoft Entourage.mdimporter
        - com.microsoft.entourageMDImporter
        /Library/Spotlight/ParallelsMD.mdimporter
        - com.parallels.mdimporter
        /Users/USER/Library/Application Support/Google/Chrome/PepperFlash/12.0.0.70/PepperFlashPlayer.plugin
        - com.macromedia.PepperFlashPlayer.pepper
        /Users/USER/Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
        - com.citrixonline.mac.WebDeploymentPlugin
    Library paths
        /Applications/Karaoke Maker/libmp3lame.dylib
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/Frameworks/libwchar.dylib
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/CoreTypes.dylib
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/LibCURL.dylib
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/LibCrypto.dylib
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/LibSSL.dylib
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/SystemFrameworkUtils.dylib
        /Applications/Macromedia Studio 8/Macromedia Dreamweaver 8/Dreamweaver 8/Contents/MacOS/ZLib.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/DWA/DWANative.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/ARKCmdCaps.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/ARKCmdFS.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/ARKEngine.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/DWA/resources/libraries/AdobePIM.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/LWA/PWANative.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/LWA/adobe_caps.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/LWA/adobe_oobelib.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/LWA/adobe_upgrade.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/UWA/UWANative.dylib
        /Library/Application Support/Adobe/OOBE/PDApp/core/AdobePIM.dylib
        /Library/Application Support/DivX/Libraries/libDivXDesktopSupport.dylib
        /Library/Application Support/DivX/QtPlugins/accessible/libqtaccessiblewidgets.dylib
        /Library/Application Support/DivX/QtPlugins/iconengines/libqsvgicon.dylib
        /Library/Application Support/DivX/QtPlugins/imageformats/libqgif.dylib
        /Library/Application Support/DivX/QtPlugins/imageformats/libqico.dylib
        /Library/Application Support/DivX/QtPlugins/imageformats/libqjpeg.dylib
        /Library/Application Support/DivX/QtPlugins/imageformats/libqmng.dylib
        /Library/Application Support/DivX/QtPlugins/imageformats/libqsvg.dylib
        /Library/Application Support/DivX/QtPlugins/imageformats/libqtiff.dylib
        /Library/Application Support/DivX/QtPlugins/script/libqtscriptdbus.dylib
        /Library/Application Support/DivX/QtPlugins/sqldrivers/libqsqlite.dylib
        /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
        /Library/Frameworks/MacFUSE.framework/Versions/A/Resources/Debug/libfuse.dylib. dSYM/Contents/Resources/DWARF/libfuse.dylib
        /Library/Frameworks/MacFUSE.framework/Versions/A/Resources/Debug/libfuse_ino64. dylib.dSYM/Contents/Resources/DWARF/libfuse_ino64.dylib
        /Library/Printers/hp/Frameworks/HPDeviceModel.framework/Versions/3.0/Frameworks /Core.framework/Versions/3.0/Libraries/libHPIOnetsnmp.5.dylib
        /Library/Printers/hp/Frameworks/HPSmartX.framework/Versions/B/Resources/lib/SxC FReader.dylib
        /Library/Printers/hp/Frameworks/HPSmartX.framework/Versions/C/Resources/lib/SxC FReader.dylib
        /Users/USER/Library/Application Support/AOL Desktop/Security/libnspr4.dylib
        /Users/USER/Library/Application Support/AOL Desktop/Security/libnssckbi.dylib
        /Users/USER/Library/Application Support/AOL Desktop/Security/libplc4.dylib
        /Users/USER/Library/Application Support/AOL Desktop/Security/libplds4.dylib
        /Users/USER/Library/Application Support/Firefox/Profiles/w5owlxqa.default/gmp-gmpopenh264/1.1/libgmpopenh264.dy lib
        /Users/USER/Library/Application Support/Google/Chrome/WidevineCDM/1.4.6.758/_platform_specific/mac_x64/libwidev inecdm.dylib
        /Users/USER/Library/Caches/com.apple.ScreenSaver.Engine/com.apple.vision/com.ap ple.vision.64FaceCoreCLKernel.dylib
        /mike's old computer/adobe applications/Adobe Version Cue/libpbodbc3.dylib
        /mike's old computer/adobe applications/Adobe Version Cue/libps-gcc2-v8_50.dylib
        /mike's old computer/adobe applications/Adobe Version Cue/libps-jni-gcc2-v8_50.dylib
        /mike's old computer/adobe applications/Adobe Version Cue/libps-pb-gcc2-v8_50.dylib
        /mike's old computer/adobe applications/Adobe Version Cue/libps-rw-gcc2-v8_50.dylib
        /mike's old computer/adobe applications/Adobe Version Cue/libps-util-gcc2-v8_50.dylib
        /mike's old computer/adobe applications/Adobe Version Cue/tomcat/webapps/ROOT/WEB-INF/components/com.adobe.bauhaus.nativecomm/res/VCF oundation.dylib
        /usr/lib/libgutenprint.2.0.3.dylib
        /usr/local/lib/libfreetype.6.3.16.dylib
        /usr/local/lib/libfreetype.6.dylib
        /usr/local/lib/libfreetype.dylib
        /usr/local/lib/libfuse.2.dylib
        /usr/local/lib/libfuse_ino64.2.dylib
    Installations
        Norton AntiVirus Application: 6/20/10, 10:21 PM
        Symantec Scheduler: 6/20/10, 10:21 PM
        Microsoft® Silverlight™ Browser Plug-In: 6/19/10, 8:25 PM
        Parallels Desktop 5 for Mac: 6/10/10, 6:02 AM
        MacFUSE Core: 6/10/10, 6:03 AM
    Elapsed time (sec): 317
    <Edited By Host>

Maybe you are looking for

  • GUI_UPLOAD Function Module in 4.6C does not split into lines

    Dear All, I'm about to upload text file into SAP using the FM 'GUI_UPLOAD'. Previously I've developed a test program to upload the same file in SAP v4.7 and it returns correctly into several lines as expected. Snippet: CALL FUNCTION 'GUI_UPLOAD'    

  • OpenGL crash in MAC

    We have a Photoshop filter plugin that uses OpenGL component in plugin window. Plugin is crashing in glDrawElements whenever plugin window looses focus. Note, that it works fine on Windows. Any suggestions are highly appreciated.

  • Seven year old iMac connection to cable

    I have a seven year old iMac. A friend would like it for her son, who has no computer but would like to connect to Optimum online. Is that possible considering the age of the computer?

  • Metric conversion

    Can anyone tell me how they would go about converting a set value for meters to an equivalent number of yards, feet and inches with yards and feet both being integers. Example: 10 meters is equal to: 10 yards 2 feet 1.32424 inches I was able to get a

  • KDE SC 4.4.0 released

    KDE announced the availability of its Software Compilation 4.4, "Caikaku". You will find all upstream changes and new features on their website. As usual we provide the latest packages for Arch. Unfortunately this update will need some user intervent