Waiting it out for new ACD revisions?

I am on the edge of splurging for either a new 23 or 30 inch ACD, but I would kill myself if I bought one right before a big revisions. I have read the rumors and all, but I still have absolutely no idea what to do. To go for it, or to wait. Any suggestions??
Maybe a 24 inch HD LED introduction will come after a bit, and if that were the case, I would hate myself for buying a 23 ACD now.

"Maybe a 24 inch HD LED introduction will come after a bit, and if that were the case, I would hate myself for buying a 23 ACD now..."
It will be two weeks after you buy a current model....;)
Seriously, new displays can't be far off. It's been several years since the current line up was introduced and the displays are now the "oldest" products in the Apple lineup...

Similar Messages

Roll out for new plant need some informations

Hi,
We are going to roll out for our 2nd plant. So I need your help.
I am explaining the scenario,
Current scenario is: we have two manufacturing plants (ex:-one in noida and another in gurgaon) and in both plants we have six product line (in A plant=3, in B plant=3).
For both plants we are using one Company code (1000). and we are not using the business area.
But now the problem is this, that management wants separate reporting (P&l statement and Balance sheet) Plant wise and Product wise.
We decide to create a separate co- code for 2nd plant and six business area for product lines.
(In this regards I need your suggestions that how can we define the enterprise structure)
Please tell me
1. what new configurations we need to be done for new co-code?
2. In which areas business area will be affected and how and where we will assign the business area?
3. As we are doing transaction in sap since last year and we are doing this roll out in mid of 2008 so what will be the impact on the business.
4. How we will transfer the transactional data from one co-code to another, because data of both plants lies in previous co-code(1000).
Data like:- A. Transfer of General ledger balances
          B. Transfer of open line items of General ledgers
          C. Transfer of asset and accumulated depreciation from one co code to another.
          D. Controlling transfer postings.
          E. Customer / Vendor open items and balances transfer posting. Etc
If someone knew about something more to be taken care of, please guide so that we can successfully complete the roll out.
Please advice me, its urgent. if any one can give me his mobile to make me understood i can call to him .
Thanks and regards
Kuldeep singh

if they want to a seperate P&L and B/S the why dont you make them as profit centers where you can take a P&L n B/S. at this level

Roll out for new plants

Dear All,
I would like to know what are the steps taken to roll out a running SAP project for new plant ?
Regards
Mohan

Check this:
http://www.open.hr/hiz/hrusko/RolloutPresCASE3.pdf
http://software.silicon.com/applications/0,39024653,39167631,00.htm
http://help.sap.com/saphelp_sm40/helpdata/en/45/5af1f3e5f81dece10000000a155369/content.htm
Thanks..
Shambhu

Stupid, but essential question : Waiting until Spring for new MB

I know, I know....this is yet another one of those stupid questions....but I can't stop thinking about it...
After two delayed shipment dates, I am kinda sick of Apple as of right now....I'm hearing that they're possibly coming out with a new MB this coming spring. The new MB supposedly comes with the core 2 duo processor, and a new logic board to fully take advantage of the new processor. I do have a vaio laptop right now..so I guess I don't mind waiting.....except the grueling pain of wanting to have an apple for the next....6 months.....
What would YOU do?.....(should I just wait for my MB to come or should I cancel the order and wait 'til next spring?....)
(again, I know this is a stupid question, so don't mention it....I just wanted to get the general public perspective.)

yellowman-
i was in the same position as you and i totally understand how you feel.
in my case, i could not wait (eventhough i desperately wanted to) because my school starts in a less than a week so i needed a notebook. i received my macbook about a week ago without major problems. all seems to be working fine. however, after owning it, there is really nothing special about the macbook. sure, it's more attractive than other notebooks, but it gives you nothing more and nothing less(except the operating system) than what dell or sony has to offer.
and besides, include me in the less-impressed customer category of the macbook series. even with little things that happen with my macbook (ie overheating), i get paranoid for no apparent reason. simply put, the macbook is a torturing machine. no righful owner should feel this way.
with the macbook series, apple has progressed in terms of the style and versitility that they can bring out to the market. however, they have taken a step backwards in terms of reliability. you should wait for the second generation macbooks where they will be more familiar with its design flaws and hopefully will make it better.
so in conclusion, i'll give you a little SAT format summary:
apple is to steve jobs; as macbook is to paris hilton.
if that makes sense

Arrange Menu Blanked Out for New Items - Adobe Edge

Why is the Arrange Menu blanked out, it's very VERY frustrating when I want to simply adjust the layer of some text I created in Edge as it was thrown to the bottom layer which isn't very handy when I am trying to add it in as new content on the TOP layer.
what is the point to having an Arrange menu if it doesn't even work?
Is there a setting that I can change to enable layer alterations or am I missing something here?
EDIT
As a bit of extra information, I read that you need to edit the layer of items using CSS which if that is true leaves me in the SH## due to the fact that the software I am using creates Inline CSS and I honestly have no idea how to modify that. I'm using WYSIWYG Website Builder 8.5.
The other thing that is frustrating would be that I have only 2 options... create all my content inside of WWB 8.5 or build it all inside of Edge.
Unfortunately, if I want to add new items to my website, I would have to overwrite the old HTML when I export out of WWB which will erase all the content from inside of Edge... so the only choice I really have is to add content via Edge to ensure I don't lose all of my hard work setting up animations etc in the site.
Problem is, for this to work out, all content needs to be added in Edge, not just the fancy stuff as it seems to be layer locked... Really dissapointed if there is nothing Edge can do to enable layer modification... that will make it far less valuable to people such as myself who do not have the timeframe to learn how to modify inline css or any css for that matter. (way I see it is that if you have to get in and work with code, then this type of "designer friendly" software hasn't really performed it's role properly)
Sure this will shock the majority of purist web builders and professionals who love to work with code day in day out notebook++ is their friend, but why can't things be done differently, does the code have to look all neat and tidy so long as it works?
EDIT 2
To clarify, all elements in the file are built and added outside of EDGE except for the most recent text field. This text field was thrown somewhere in between several of the layers on the website and needs to be adjusted. Also, layers created inside of WWB need to be adjusted outside of the software if possible to avoid re-exporting and the consequential wiping of the Index.html page I am adding animations to.

Hi CX,
If I understand correctly, you're importing an existing HTML page into Animate and trying to arrange the layers? This isn't supported in Animate due to a lot of complications that can go on with your external document; you have to manually assign z-index via CSS to control this. We deliberately impose as little as possible on your existing markup since if starts being amended progromatically there's a huge potential for misintrepertation; for example, if you have a navigation menu on your page and Animate imposes heirarchy on another element, your nav might appear below the page content which is obviously undesirable.
Sarah

Ownership change, how to clear out for new owner?

I need to know how to properly clear out everything on my kids Hp touchpads before they sell them? What's the best way?

Hi,
The best way is bring it back to factory settings that means the machine will be set back to the day you opening the box. Please try:
Open the launcher,
Go to the Settings tab,
To Device Info,
Touch Reset Options,
Tehn select Full Erase or Secure Full Erase (takes longer but more powerful erasing).
Regards.
click the launcher up arrow
Click on the Settings tab
Click Device Info
Click Reset Options
Click Full Erase or Secure Full Erase (takes longer but more powerful erasing)- See more at: http://datadele.com/question/how-do-you-factory-reset-hp-touchpad#sthash.uZqO1qNm.dpuf
click the launcher up arrow
Click on the Settings tab
Click Device Info
Click Reset Options
Click Full Erase or Secure Full Erase (takes longer but more powerful erasing)- See more at: http://datadele.com/question/how-do-you-factory-reset-hp-touchpad#sthash.uZqO1qNm.dpuf
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

OK, as always I waited before downloading a new OS and I sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP!

OK, as always I waited before downloading a new OS and I'm sure glad I did. On the APP store I sorted comments by most critical...and WHOA...what is Apple doing? No support for Logic 9, MS Office? Is Apple only trying to reach the iphone/iTouch crowd? HELP! I was going to buy a new Mac pro & two 27" monitors but until I see some real problem addressing by Apple...I'll keep what I have and see how everything pans out. If anyone has any comments to ally my fears, I welcome them. I've been a devoted Mac user since 1993. 7500; G4; G5; and my latest Mac Pro...Where do I go? Again...HELP!

Hi there,
If you look through ALL the reviews, they are mainly good. I feel that Lion is an excellent upgrade, although not essential.
There have been some issues with MS Office, but right now, it is up to Microsoft to issue a Lion compatible update, which will come in time. Saying this, MS Office has been working fine on my mac, it seems to be an isolated issue.
Logic 9 seems like a strange issue. Again, an update looks to be coming soon, with Lion support.
I do not feel that apple only focusing on the iPhone and iPad user base. There are many features carried along, but the machine can still be used for pro tools and use just as well. It still is a fantastic, reliable, fast, easy to use OS, which I have had very few problems with. Some additions you may not use, but they don't get in the way. You will love the new Exposé, Mission Control, as it is great for pro users who have many windows open at once, and the new spaces. You may however, never use Launchpad, but you don't have to, just drag it away from the dock!
I really reccomend buying a mac with Lion, although if you are worried about bugs, wait a few months for the issues to be ironed out, and updates to be given. Because the update is so very cheap, I really think you can hardly go wrong. Try it out with your current mac, and if you like it, go ahead and buy your new ones.
Lion is fantastic, albeit maybe rushed.
Any other queries, just ask,
Nathan

Worth waiting for new OS for Macbook

I would like to purchase a Macbook, but i was wondering if it's worth waiting till october for the new operating system. Are they just going to put Leopard on the same macbooks? or are they going to upgrade the laptop entirely to handle the new OS? If they are just going to put the new OS on the same laptop, then i'll just upgrade, but if they are going to change the laptop significantly other than just the OS, i'll wait. So whats the deal?

burtonforever,
OS upgrades and hardware revisions are completely independent. If a given hardware product is refreshed anything close to an OS upgrade, it is only coincidental.
In other words, Leopard will just come on the same machines that are being produced now, with the exception of any machines that get a refresh in the interim.
Scott

When is Apple coming out with new software for ipad 2?

When is Apple coming out with new software for ipad 2

varjak paw wrote:
Perhaps if you start a thread detailing the problems you're having, someone can help you sort them out now rather than you waiting for some future update which may or may not address your issues.
Regards.
Like this one:
https://discussions.apple.com/thread/3390134
The Music app is ridiculously messed up ... if you use it enough, you will come across these issues which can only be addressed by an iOS update.

Waiting for new charger for my Satellite A300

I dont know if I am onto the right place for my problem.
I bought a Toshiba laptop on 9th September 2009. Model: Toshiba Satelite A300-1RY.
Everything has been going fine with the laptop since date of purchase, except for the fact that it is so slow to start up and shut down although I am told this is normal on Toshiba laptops, until last week when the charger stopped working on it. It was working fine and then next thing I know my laptop shuts itself down and wont start up again, I tried the charger on 4 plug sockets and it wouldnt work on any of them.
I brought the laptop and charger into my local branch of the shop it was bought in. It was tried in a plug socket there and wouldnt work so they said it is definitely the charger that isnt working. I was told it would be sent off to Toshiba and they would send out a new one and I could pick it up in the store within a few days.
That was on the 22nd May. I still hadnt received any update from them so I called them yesterday to check. Firstly I was told that it was sent off for repair after I was told I would be getting a new one. Then I was told it wasnt even covered in my warranty but it was going to be repaired as a gesture of goodwill. Then I was told that it hadnt been looked at at all because the man I left the charger with had taken the serial number down wrong, and I wasnt told this until I rang nearly 2 weeks later to look for an update.
I am absolutely furious to be told that my charger isnt included in my warranty. I was told when I bought the computer it had a full one year warranty. I explained to the man I bought it off that I hadnt a clue about laptops and had never bought one or used one before so he recommended I buy an extra 2 year warranty which cost me a lot of money on top of what I was after forking out for the laptop. I was told this covers anything that goes wrong with my laptop for the next 3 years and after that if anything goes wrong it would be time to get a new one anyway. So to be told now that actually very little is covered in this warranty has really infuriated me. DID are adamant this is not the case and this is not what they sell. If this wasnt the case I would not have wasted the money on extra warranties if they do nothing to help me when things go wrong.
The fact that the charger has stopped working after just 9 months was a total surprise in the first place, and then to be told yesterday that it isnt covered by its original one year warranty was just a total shock for me.
I am really angry about the whole matter, especially due to the fact that after nearly 2 weeks of waiting for updates I am now told this, and also the fact that when I left the charger into shop I was told it was no problem and I would have a new one within a few days.

I am not 100% sure but I think one year warranty is for whole product including AC adaptor.
As I can see problem is guy that works by your local dealer.
What you have done is right and probably I would do the same but you can try to ask them who is Toshiba service provider they are working with and try to contact them directly.
Explain the situation and try to clarify this with Toshiba service provider directly. Be cool on the phone or directly in service. Take the bill with you where they can see the date of purchase.
I believe they will help you with this.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?

How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.

May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete.

I'm trying to set up an iPad for work and the apple id I was trying to use came back expired. I set a new password and then it said it was invalid. Now I'm locked out for too many tries answering security questions that I don't remember setting up. Help!

I seem to be stuck in apple ID ****. First the password was expired only two minutes after I finished setting up the account and then the new password was invalid. I don't know what to try next but this is making me crazy. And I'm locked out for eight hours for too many attempts at answering questions that I never set up in the first place. I don't know what gives but something is way off. I need to set up this iPad for work but I can't get past the login.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TS3682 I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1! This is what I get for buying an Ipad twice in a week because of a broken scre

I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1! This is what I get for buying an Ipad twice in a week because of a broken screen? $500 the first buy and then another $299 plus tax for the swaped out one that I can't restore with my backup data.

I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
Copied from the article that linked you to this discussion ....
Resolution
Update your device to the latest version of iOS to be able to restore the backup.

Swap out dataset for new data possible?

If I use the same column names in my underlying database tables, is it possible to use them in an existing report to refresh data for new quarter without wiping out my existing reports? The reports took a long time to set up so I hope I can do this.
If it is, can you please point me in the right direction?
Thanks in advance. I think is is probably a basic concept but I'm having a mental block.

Hi ,
I dont think it is possible to append the data to existing report . Once the data rendered to the report , the data is pretty much static and if you want new data to be shown up you need to refresh and re-render the report. Alteranatively , if your
report is taking long time to render consider caching the reports
http://msdn.microsoft.com/en-IN/library/ms155927.aspx
Best Regards Sorna

Waiting it out for new ACD revisions?

Similar Messages

Maybe you are looking for