Waiting time before operation in APO

Dear All,
I have a questions regarding the waiting time of operations with APO.
Our customer wants to have a waiting time befor the operation. In R/3 there is no problem as we can use 'Wait time' to define the inter-operation time. But in APO 'wait time' is taken together with the 'transport time' as total on the end of the operation (according to oss note 604878).
How can we configure the interoperation-times to have a waiting time befor the operation also in APO?
Thank you in advance for you help.
Best regards,
Thomas

Hi thomas,
If the operation is in start, then u can add additional time as waiting time,  If it is in the middle, u can add waiting time before the prior operation as additional time.  If it is in the last, then u use Tear down time as additional time.
Hope this helps, please confirm
Regards
R. Senthil mareeswaran.

Similar Messages

  • Trying to access https site with a cert, got "The connection was interrupted" error after 30 seconds of waiting time before clicking on OK. But I can get in by clicking on Try Again button.

    I have a web site running on https. Every users need certificates to get in.
    I found out that if I didn't submit my cert within 30 seconds, Firefox displayed "The connection was interrupted". This problem is repeatable. But if I click on "Try Again" button on the error page, I can get in all the time.
    This problem doesn't happen on IE.
    Can you provide any tips to avoid seeing the error page?

    It is a miracle - After about 9 months without itunes, the new release installed on my machine today and appears to be working.
    7.0.0.70 is the verion I just installed.
    Another note to add to this now resolved issue. I bought an AirPort Express and I was not able to install the Admin software on the CD. I received the same error as I received with iTunes and Quicktime. This leads me to believe that this problem is in the registry or some other installer issue that is specific to Apple installations. I will have to go home and try to re-install that software. Maybe the new iTunes version cleared up the problem.

  • Why does my apple tv movie take an hour plus wait time before I can start the movie

    help!

    This is up to your internet connection. You need to check www.speedtest.net
    6mbps is required for instant HD rentals. Wifi interference can also cause issues so try ethernet and/or check www.istumbler.net
    Make sure you are using your ISP's DNS
    All content starts after 5 seconds here

  • Twin Frozr II/oc Black screen wait time before showing desktop

    Help guys I'm using driver version 8.892.0.0 AMD at present and it takes approx 25 sec to go from the black screen to desktop after logging in any suggestions to curing the problem.  vitals below
    Gigabyte Z68 UD3H-B3
    Twin Frozr II/oc 6950
    16gb g.skill 1866
    OCZ 60gb SSD
    WD 750 s3
    Cooler Master 700w Extreme Power Plus

    Uninstall the Catalyst and use the latest Driver Cleaner (it's a Free Download) while in Safe Mode.
    After you reboot from Safe Mode .. goto AMD website. I would recommend downloading Catalyst 11.10 rather than 11.11 as heard many problems with that one this month. You'll have to look for Previous Drivers listed at AMD site or can just Google for AMD Catalyst 11.10 download and find a known good site to download it from.
     I would not attempt to BIOS Flash the HD 6950's to make them 6970 like.  The 1st few batches released early this year you could but they have been fixed. So GPU BIOS Flashing may and likely will damage the card.
     Remember to always perform a HDD Backup ... also easy to do is System Restore Points ..that way if things get messy ..can go back.
    Wish you the best of Success!

  • Waiting time in process chain

    Hello,
    Could anyone tell me how to insert waiting time in a process chain?
    I need 30 minutes of waiting time before the nex step..
    Regards,
    Fredrik

    Aha! :-)..
    So, is this waiting time before or after the actual step?
    Regards,
    Fredrik

  • CAD Wrap-up wait time

    Hi Friends,
    I am using CAD with UCCX 9.0.2.
    I need help to configure wait time in wrap-up code. Currently when the agent hang-up the call the wrap-up code window pop up and agent goes in ready state immediately after selecting that code. I need to configure wait time for 2 min after agent select the wrap-up code, agent should get 2 min wait time before going to in ready state.
    Regards,
    Dinesh Joshi

    You'll want to check the Automatic State Changes configuration in Cisco Desktop Administrator. From the guide:
    "By default, automatic state changes are not enabled. After agents enter wrap-up data, they remain in the Work state for the length of time set for the wrap-up timer or until they change states manually, whichever happens first. (The wrap-up timer value is configured in Unified CCX Administration.)
    If automatic state changes are enabled, agents are automatically changed from the
    Work state to the Ready state (or to the Not Ready state, if they select that state while
    still on a call) after they enter wrap-up data.
    Automatic state changes can be enabled or disabled only on the work flow group level.
    To enable or disable automatic state changes:
    1.Select the Wrap-up Data node under the work flow group whose automatic state changes you want to enable or disable.
    2.Select or clear the Enable Automatic State Change check box.
    3.Click Apply.

  • ERR Driver Status: (Hex 0xBFFA2003) Max Time exceeded before operation completed. (TEK DPO2014)

    Hi NI.
    I'm trying to aquire signals from an Tektronix DPO2014 oscilloscope using Labview SignalExpress.
    I have downloaded and installed the appropriate driver (at least I think )) : tkdpo2k using NI download station.
    I run an ethernet connection and I do see the device in MAX, however im not quite sure if I have configured the IVI driver sessions correctly.
    Anyway, when I open Signal Express, and select "IVI scope aquire" I can select my device under "resource descriptor" and the appropriate driver under "Instrument driver". I then turn on my Oscilloscope, tune in the machines tachogenerator, which is the signal the oscilloscope is to measure, and then select "autosetup" The sinosoidal waweform shows up on the oscilloscope and in SignalExpress, it is only done once. I then try and run the program and the error message accurs:
    Timeout.
    <ERR>Driver Status:  (Hex 0xBFFA2003) Max Time exceeded before operation completed.
    Is the problem regarding problems with triggertime or write/read problems with the TCP/IP connection?
    What can I do to fix this problem?
    Best Regards
    Danny Joergensen
    University of Aalborg Denmark
    Attachments:
    MAXscreenshot.png ‏265 KB
    device.png ‏320 KB

    How are you communicating? GPIB? Are you sure you have the correct address. Can you send an IDN command with MAX? Does MAX see the instrument?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Error -1073807339 Hex 0xBFFF0015 Timeout expired before operation completed

    Hi,
    I am getting the Error -1073807339 Hex 0xBFFF0015 Timeout expired before operation completed message box but unlike many users that seemed to have a similar problem, it doesn't happened systematically... I am getting the message box error at random on a measurement and then it just works back fine, until the next time it happens again during a continuous measurement acquisiton.
    I am working with a HP 34970A, plugged to the pc with a Agilent 82357A USB to GPIB and LabVIEW 2012 sp1. MAX is up to date, so is the I/0 Libraries of Keysight. Drivers are all installed and updated, Communication with IEEE 488 is enable in the I/0 Libraries, passport tullip also in NI VISA through MAX. I run a small VI that should make a continuous acquisition of four temperature using PT strobes plugged to the HP 34970A and graph them, also writting them on a Excel like document. The waiting time between two measurement is set at first by users. To take the measurment, I am runing an adaptated VI from the HP 34970A drivers. I think the problem comes from my VI's structures but I can't find it myself. I am also very surprised that it actually does work fine most of the time and just randomly crash in a loop...
    I attached the VIs if needed.
    I hope I was clear enough and that you might have an idea to help me fix this problem.
    Thank you in advance.
    Attachments:
    Main_VI.vi ‏17 KB
    Agilent 34970 Temp Scan.vi ‏36 KB

    Is there someone here to help me?

  • Wait time after GR

    Dear Friends
    In REM,When i do backflush,after GR it comes to inspection stock and then in unrestricted stock.Now before going to next order it should be in wait 30 days in storage loaction and then it goes to next planned order.
    plz give solution.
    thanks
    KK

    Hi,
    The wait time maintained in Operation is for Scheduling purpose only..
    You can not enforce the componnt to get issued to the higher assembly (for th next stage)..
    Till one month, you can Block the Stock or keep the Stock as Quality stock, thn no one can issue the stock to the next stage.
    In my view, there is no other option than the manual tracking of the Materials..
    Regards,
    Siva

  • Database Error: RSR0009: Resource not available for pool. Wait-time expired

    i am occassionally receiving the following error during database connections in my servlet:
    Database Error: RSR0009: Resource not available for pool [webAdvisorTestPool]. Wait-time expired
    i understand that this is a result of a connection leak from improper closure of my Connection object, but i thought that i was properly closing my connection.
    i can get the error if i do the following steps:
    1) access my login page and enter login credentials.
    2) submit the login which then hits the Authentication servlet.
    3) Authentication servlet authenticates and takes me to home page.
    4) hit the back button to get back to the login page.
    5) repeat this process until i hit the Max Pool Size (from web server).
    6) then i get the error message
    here are some details:
    i have an Authentication servlet; here is the pertinent code from that servlet:
    try {     // retrieve the user and add the User object to the session     DAO dao = new DAO();     Person authenticUser = dao.getPerson(userID, password);     session.setAttribute("validUser", authenticUser);     redirectPage = mapping.findForward("success"); }
    i also have a DAO object that handles all of my DB transactions (and you can see from my code above that the Authentication servlet is using that object); here is the pertinant code from that servlet:
    public DAO() {     datasource = "java:comp/env/jdbc/webAdvisorTest"; } public Person getPerson(String userID, String password)     throws ObjectNotFoundException {     // JDBC variables     DataSource ds = null;     Connection conn = null;     PreparedStatement stmt = null;     ResultSet results = null;     // User variables     Person validUser = null;     try     {         // Retrieve the DataSource from JNDI         InitialContext ctx = new InitialContext();         // if this statement fails, NamingException is thrown         ds = (DataSource)ctx.lookup(datasource);         // get DB connection and perform SQL operations         conn = ds.getConnection();         // User variables         String validUserID = null;         String validFName = null;         String validLName = null;         String validEmail = null;         // get DB connection and perform SQL operations         conn = ds.getConnection();         stmt = conn.prepareStatement(PERSON_QUERY);         stmt.setString(1, userID);         stmt.setString(2, password);         results = stmt.executeQuery();         // iterate through the results         if (results.next())         {             validUserID = results.getString("id");             validFName = results.getString("first_name");             validLName = results.getString("last_name");             validUser = new Person(validUserID, validFName, validLName);         }     }     // handle SQL errors     catch(SQLException e)     {         e.printStackTrace(System.err);         throw new RuntimeException("Database Error: " + e.getMessage());     }     // handle JNDI errors     catch(NamingException e)     {         throw new RuntimeException("JNDI Error: " + e.getMessage());     }     // clean up resources     finally     {         doClosure(results, stmt, conn);     }     // if the user was not found, throw ObjectNotFoundException     if(validUser == null)     {         throw new ObjectNotFoundException();     }     return validUser; } protected void doClosure(ResultSet results, PreparedStatement stmt,     Connection conn) {     if (results != null)     {         try { results.close(); }         catch (SQLException e) { e.printStackTrace(System.err); }     }     if (stmt != null)     {         try { stmt.close(); }         catch (SQLException e) { e.printStackTrace(System.err); }     }     if (conn != null)     {         try         {             System.out.println("R18Resources.conn before close: " + conn);             conn.close();             System.out.println("R18Resources.conn after close: " + conn);             System.out.println("R18Resources.conn is closed? " +                 conn.isClosed());         }         catch (SQLException e)         {             System.out.println("R18Resource conn close error: " +                 e.getMessage());         }     } }
    as you can see, i've added some print statements in my connection closure block. based on my output log, each connection is being properly closed and i am not encountering any errors during that closing block.
    any ideas???
    Message was edited by:
    millerand

    Please try the following code in your doClosure method. Replace your code with the following code.
    public void doClosure(ResultSet pResultSet, Statement pStmt, Connection pConn) throws Exception {
    try {
                   if (pResultSet != null) {
                        pResultSet.close();
                        pResultSet = null;
              } catch (SQLException se) {
              logger.error( se );
              } finally {
                   try {
                        if (pStmt != null) {
                             pStmt.close();
                             pStmt = null;
                   } catch (SQLException se) {
                   logger.error(se);
                   } finally {
                        try {
                             if (pConn != null) {
                                  pConn.close();
                                  pConn = null;
                        } catch (SQLException se) {
                        logger.error(se);
    And let me know if you still face this issue. What is the application server you are using?

  • The wait time and resolve time is DEPLORABLE

    Today is the third day in a row I have called into Verizon for the same issue. Day one spent 25 minutes on hold and NEVER got to speak to a person before I hung up. Day 2 Had a 15 minute hold before I spoke with someone, who then told me I had to speak to directv about something that was related to the Verizon part of my service, called directv confirmed it was a Verizon thing with a supervisor. Called BACK into Verizon waited for 30 minutes before I spoke with someone, got 30 seconds worth of talk in before another 15 minute hold, he came back on no apology not anything about the absolute rudeness and lack of courtesy. He told me they would have it fixed by the end of the day. Now here it is the nest day still not resolved, So I write this (while on hold waiting to have the call answered, its been 20 minutes) She finally did answer and was down right rude and through me right back on hold. I am so fed up with big business...

    topdog wrote:
    It may be your location.  Here in Baltimore, there is little wait time and the representitives I get do not speak with accents.
    Agree.  I rarely wait more than a minute or two.  And except at really off hours don't hear a foreign accent.  NY area.

  • How to keep waiting time between processed messages !!

    Hi Folks,
    I have got one scenario required waiting time between processed messages. The problem as follows !!
    File --> Proxy scenario. I receive 15 messages from sender side (same messages structure) so working with one interfaces. File picking and transforming this message and split into 2 messages. messages are receiving to receiver. I am using BPM with 7,8 steps like receiving step, block , message transformation step , internal block 1 for sender 1, internal block 2 for sender 2.
    All things are working fine, messages are going to receiver properly. But customer requirement is , wait step required between processed messages before sender1. I have put wait step still, PI picks all messages in one shot processing and waiting for 2 minutes, after 2 minutes sending all messages at the same time, this process is not working.
    I have tried with wait step in mapping (Sarvesh) given excellent idea, still PI works the same way.
    Can someone please explain a bit why the messages or not waiting message by message. I am using EOIO with Queue name and file process mode "BY NAME" and I have tried "BY TIME" as well. I have given priority to this Queue. On BPM Queue assignment : One Queue.
    Please I am expecting positive answer !!
    Many Thanks in Advance
    San

    Hi Rudolf Yaskorski ,
    Not sure about your PI release and BPM model, do you create separate process instance for each file, or do you process files collecting them in one single instance? Are you using parallelization within your ccBPM ?
    I am using serialization, I don't think bpm can do Parallization until PI 7.0, but PI 7.11 has got has queue assignment. But I am using one queue. This must be serialization.
    To me it looks like your issue is not in ccBPM but rather more in polling files (as per your post file CC polls all 15 files in one shot). So if you wish to poll the files not at the same time some workaround is required. Possible options you could check out:
    A. Either implement "wait" in your mapping based on file name or other criteria (e.g. directory name). Check out if respective BPM instances are really created at different times.
    I have used wait step in mapping. These 15 messages has to go through one interface. So I am using one interface. But I have checked mapping process time in all messages on receiver system. Shows same timing, even though I put 40000 ms waiting time in mapping.
    B. Try polling different files (or use different directories) with different channels and coordinate starting / stopping of your channels by scheduling availability for each CC in RWB. E.g. you poll file 1 with CC 1. You start 2 minutes later CC 2 and poll file 2. And so on.
    I am not clear about this . On BPM waiting step is working and it keeps wait all messages, which are coming through one interface. Then it releases all messages at the same time.
    I don't know how to resolve this. I have tried with Transport acknowledgment, but all messages are going to reciver system waiting at receiver system in priority queue and processing in EOIO, but taking so long. Rather all messages go and sits in queue, I want to stop messages by message with 2 minutes time gap. How please?
    Kind Regards
    San

  • Waiting time between entry posting in R/3 and avail. in BW

    Dear SAP community,
    We have set up a process chain which gives us the freedom to load GL account into BW on an ad-hoc basis.
    Unfortunately it is not really ad-hoc after we have  posted an entry in GL account in R/3 we need to wait approximately 1 hour before we run process chain in order to see posted entry. If we run process chain immediatly after posting entry we woul not see the entry in BW.
    Does anyone knows if there is a waiting time from when we post an entry into SAP R3 to when we can run the process chain and see the posting in BW?
    Thanks  a lot for you help.
    Stefanie

    Hi Stefanie,
    What is the Datasource being used?
    For old GL extractors, like 0FI_GL_4, there is a safety interval upper limit of 1 day, meaning data posted till yesterday will be extracted if the chains run today. There are workarouds given by SAP to extract most recent data for these.
    For new GL extractors like 0FI_GL_10, there is a safety interval lower limit of 1 hour, meaning the most current data would be extracted and there would be an overlap of 1 hour between delta loads and some records are extracted twice.

  • Monitor cycles on and off many times before settling and staying on

    When I turn my mac mini on or revive it from sleep, the monitor wakes up for a short time, then goes black for 30 seconds then revives itself for about 23 seconds in a cycle (on, off, on, off) that lasts about 30 minutes, maybe longer.  After which, the monitor stays on indefinitely.
    ...until the computer goes back to sleep or is turned off...  then the whole cycle starts over.
    I do not have to touch anything for the cycles to happen.
    The computer is running fine, in fact I can continue to type... I just cant see what I am doing.
    This problem is a recent development and was not triggered by anything I am aware of.
    After 6-8 times of going through this, I have not yet noticed any change in duration of cycles or of the length of time before it settles out.
    I have a Mac Mini (Mid 2011)
    External DELL monitor connected via Thunderbolt port mini display port to VGA.
    I have tried reseting the SMC and PRAM with no correction to the problem.

    Hello slodave,
    Since you are not hearing the hard drives or anything kick on for a while it sounds like the issue may be with your power supply.
    You may want to look at the power supply there should be a light on it. See if it shows it is starting properly before the computer actually turns on (so this is during the 6+ times it is turning on and off).
    If the power supply is going then you may just need to replace it to continue normal operation.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • FTP sender adapter wait sometime before processing a message

    Hi,
    I want my FTP sender adapter to wait sometime before processing a message. This is needed in my case since the receiver of the message cannot consume message in, say two seconds, so I would like to configure a "time to wait before processing message" in PI since PI processes all of the files in folder without waiting another poll interval time if more than one exist.
    Is this possible in PI 7.0 sp16? 
    Regards,

    HI Tarik
    BPM is the solution for this problem. If you are not willing to use BPM other solutions are  Adapter module and Scripts
    You can write adapter module and use the threads mechanism. Thread.sleep can help you achieve this but you need to set this properly.
    Another method is Unix script. Let your actual directory be Dir1 and poll PI to Dir2. Use the script to write files from Dir1 to Dir2 one by one and with time gap. This will work for you.
    If you have PI system on Windows i prefer to go with Adapter module.
    Thanks
    Gaurav

Maybe you are looking for