Wake from sleep sound?

When you wake your late 08 MBP from sleep does the dvd drive make a weird noise like its loading a cd?
Just trying to figure out if its normal. It sounds like a sick cd drive with arthritis...

Have you inserted a DVD movie and chosen a region? My drive was doing a full insert/eject cycle on wake from sleep until I did that.

Similar Messages

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

Creaking sound upon wake from Sleep

I have only had my MBP (very first mac) last 1/25 and for a few days would wake from sleep totally silent. In the last couple of days occasionally it wil make a creaking sound for a couple of seconds after I raise the lid sounds kinda like gears. Not very loud tho. But since this is a refurbished (june 2012) unit I was just wondering if this is normal. My old toshiba would always make creaky gear sounding noises at wake from sleep for much longer. But since it is silent it is silent most times I was wondering if this was normal or a known problem?

Originally Posted by Lawrence-NYP
I suppose you have tried playing around with the sound settings in the control panel?
If that's the case, however no one else replies to your thread, you might consider re-format your computer.
In fact I have. And this is on a freshly formatted drive unfortunately.

Wake from sleep volume extremely loud after 10.9.4 update

Every time I wake from sleep since the 10.9.4 update, my Mac Pro's volume to my speakers (via headphone jack) seems to be insanely loud despite system prefs showing the volume level at middle. Normally I like to keep my speaker's volume high and turn the system volume down, but it seems like the OSX is ignoring the system volume setting after waking up. It reverts to proper behavior when I hit volume up or down on the keyboard. Anyone notice this?

Reset the NVRAM.
NVRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery (not a portable Mac's rechargeable battery) may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.

Display no longer wakes from sleep after latest updates

G4 Quicksilver 933, nVidia Ti, 1.5GB, 20in Cinema Display
I applied the latest updates that were pushed out recently (10.5.2 and the "Leopard Graphics Update") and now my Apple display will not properly come up when I wake the box from suspend.
That is, it starts and runs fine, but if it goes into sleep, upon waking it will (sometimes) flash the contents of the desktop, and then go black. The litte green light is on. Happens from a logged in session, or from the main login screen.
I have to hit the reset or power button (or login via SSH and issue a shutdown) to get it to work again.
I only have a single monitor.
I tried:
o Powering the monitor off and on, both from the switch and by pulling the power cable
o Pulling the DVI cable and reinserting it
o Resetting NVRAM
o Re-applying both the 10.5.2 combo installer and the Leopard Graphics Update 1.0 in order
o Waving a magic wand... I mean, fixing permissions
o Changing the display resolution a few times
o Running fsck a few times (only because all these unclean shutdowns are making me nervous)
o Hitting the "Detect Displays" button in the Displays Prefs panel...
Aha! Hitting that button causes the display to flash and then go dark. I have to power cycle the unit to get the monitor to come up again.
I do have the special build option of the faster video adapter which was available all those years ago. It's quaint now, sure, but it was a fast card back then.
I'm stumped. It's surprising how something like this can turn a perfectly reasonable desktop into a boat anchor.
Message was edited by: John Verne

mjelacic wrote:
This Discussion is marked as Answered, but with my apologies to the other respondents, it is NOT. There is a problem. The software/hardware do NOT work as they are supposed to. Apple needs to address this problem immediately. Mac Book Pro will not wake from sleep when connected to a Cinema Display 23". The problem lies in the most recent operating system updates. Before the update the products worked as advertised, since then they do not. Period.
With all due respect, I am the one who posted this, and I marked it "answered." Yes, there very well may be a problem with the Leopard Graphics Update 1.0 (what a mouthful! I dub it "LGU v1.0" from this point on.), but this is so far only a hypothesis.
I found an immediate workaround which suits my purpose. If this does not suit the purposes of completely foreign (to this discussion) symptoms related to Intel-based Apple laptops and external displays, then so be it. I recommend splitting off your own symptoms to a new thread.
Certainly, my reading of the symptoms described after I posted mine mostly do not sound like what I ran into at all. For example, I never once said that my computer had problems waking from sleep. I said the /display/ had problems waking/starting up after sleep, and this is probably related to the "detect displays" mechanism that the OS uses to find attached displays when it comes out of suspend. Even if this is my misunderstanding it does not matter, since this is how it comes across to a reader. This may indicate that someone may want to clearly and carefully describe /exactly/ what they are seeing, and the steps they took in order to come to any conclusions they might have.
This will help Apple, and it will certainly help others that search these threads with their own similar but different issues they need solved.
If there is a common reproducible issue related to displays and the most recent update(s), then Apple already knows about it, or soon will. As far as my immediate needs are concerned, this is answered.

Audio volume low when computer wakes from sleep - os x yosemite

I've been having an issue ever since I upgraded to OS X Yosemite, where the audio volume coming out of my external speakers is extremely low after I wake my computer up from sleep. The only resolution I have found is restarting the computer. Once I do that, the audio volume is great. If I were to boot up my computer after it has been completely shut down, the audio volume is also great. The issue only occurs after sleep. Anyone else having a similar issue? Is there another fix besides restarting the computer?
Speakers: Bose Companion 2 Series II (these are wired, not bluetooth)
Computer: Mac Pro - late 2013 - running Yosemite

This is a BUG. It has been submitted to engineering many times - unfortunately Apple has not done anything about it.   We have 5 Mac Pros, all 5 do the same thing after updating to Yosemite.   The PRAM / SMC reset is useless - we even installed a fresh OS on one of the machines (a suggestion of the level 2 Apple tech) same problem.   Clearly this is a system level bug.   Only way to get it resolved is to keep pounding the bug report site with requests.     The squeaky wheel gets the oil.   The problem is 100% repeatable on the machines that exhibit the bug.
In the mean time set up an applescript with this command and it will reset the sound - do not include the brackets :
<do shell script "sudo killall coreaudiod" with administrator privileges>
Run it every time you wake from sleep and you won't have to deal with the problem ever again.
Pretty lame that Apple has not fixed it even though the problem appears to be pretty widespread.

Persistent Wake-from-sleep Error (!)

I have thoroughly searched both google and these forums for help with this problem, and although it appears to be a common one, a solution has not yet been found :
Every so often and very randomly, my PB G4 12" will not properly / fully wake from sleep. When opening the lid, the computer makes all the normal noises as if it were waking, but the screen does not go on. Caps lock / Num lock keys behave as though the system were awake, and attached USB mouse is also lit up. All other aspects of the system are completely unresponsive - 'coma' (!!). The only way out of the lock-up is a force restart - i've had to do that at least 5 times this week.
I have tried EVERYTHING (i can think of!) to try to fix this problem :
reset NVRAM
reset PMU
reset PRAM etc, etc. etc!
trashed all caches etc..
reinstalled OS (twice!).
checked system with both TechTool Pro + Apple Hardware Test - both report that system is in perfect working order.
I've also tried trashing the PowerManagement prefs (some users have report some success in trying this).
No effect.
I didn't want to call tech support unless absolutely necessary, because i'm sure anyone who's called before has been 'helpfully' talked through repairing permissions etc...
Does anyone here have any ideas???!

Forgot to mention that this morning i checked logs after restarting and found this entry:
* First (successful) wake-from-sleep attempt: ****
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: System Sleep
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: System Wake
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: Wake event 0008
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
Oct 18 07:44:29 PowerBook-G4-12-1GHz kernel[0]: ADB present:8c
Oct 18 07:44:31 PowerBook-G4-12-1GHz mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1); delaying packets by 5 seconds
Oct 18 07:44:38 PowerBook-G4-12-1GHz kernel[0]: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
* UNSUCCESSFUL wake-from sleep ***
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: System Sleep
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: System Wake
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: Wake event 0001
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: Sound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 960 goto Exit
Oct 18 07:50:05 PowerBook-G4-12-1GHz kernel[0]: ADB present:8c
* FORCE REBOOT*
Oct 18 08:00:04 localhost kernel[0]: standard timeslicing quantum is 10000 us
Oct 18 08:00:04 localhost kernel[0]: vmpagebootstrap: 188791 free pages
Oct 18 08:00:04 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[44]: starting
Oct 18 08:00:04 localhost kernel[0]: migtable_maxdispl = 70
Oct 18 08:00:04 localhost kernel[0]: 88 prelinked modules
Oct 18 08:00:04 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Oct 18 08:00:04 localhost kernel[0]: The Regents of the University of California. All rights reserved.
etc.
-------------------------

What are the normal Boot time?/Wake from sleep time? for MB?

Looking to buy a MacBook for my wife to replace her old Dell D-420. The Dell still works fine but takes forever to boot and to wake from hibernation. I was given an old iBook a few weeks ago and was amazed at how fast it woke from sleep mode (the boot times were pretty snappy too). So my question is. What is the "normal" wake from sleep time on a MacBook? How long does a cold boot take?
BTW: Steve isn't going to surprise us with an updated MacBook next week is he??
Thanks
Soon to be MacBook owner.

lancia is right- 56 second sound about right, my 2.0 GHz MacBook boots in about 49 seconds.
If you want your MacBook to boot up faster, you can reset the PRAM (parameter random access memory). What this does is that it resets all the devices it searches for when it starts up: forgets about them, literally
To do this, press down the command (the buttons next to the space bar) , option, P, and R keys at the same time when you turn on your MacBook. Press these keys until you hear the tone a second time. Make sure to do it quick, because after you hear the tone it won't work.
Hope this helps,
Wookams
To your BTW question:
Almost certainly not, but I still recommend waiting a couple months extra because Apple notebooks usually update themselves every 200 days or so. I was disappointed from learning this, but hey...

Macbook Pro wont wake from sleep

My '08 MacBk Pro wont wake from sleep. This has happened several times since I installed Lion. In the past I have simply clicked several times on the trackpad until it woke, but on several occasions it actually shut down after entering sleep mode, (It went to black screen, the little pulsing sleep light was dark and I got no responce to clicks on trackpad or keyboard). When this happens I can usually re-start the Mac with a hard re-boot to resolve the issue. This time however, I can't get the computer to turn on. I've tried pressing the power button once, and all that happens is that the sleep light blinks once along with a the normal whiring sound you hear when the computer is ramping up, but this lasts only a second and then it goes back to black screen/dead Mac. I also tried holding down the power button as I would for a hard reset at which point I get several blinks from the pulsing sleep light and then nothing. I also tried unplugging the cable, removing the battery and pressing the power button for 5 seconds, then reconnecting battery and cable and pressing the power button, (I got these steps from an article posted here on the furums). BTW, I have disconnected all external drives, etc. before trying any of these steps. Please let me know if there's something else I might try to revive my Mac.

Follow up: I took the MacBook Pro for repair and the tech found that the logic board was damaged - probably due to so many hard resets I had to perform to get the machine to load when starting it up after shutdown or restart. I replaced the logic board, (Very expensive) and its been running fine for 3 days. However, the freezing problem has just started again and I'm worried that having to perform a hard reset to get the macbook to load will cause more damage.
The problem that's occuring is as follows: When I start the computer up after shutdown, or sometimes after restart, the desktop fails to load and the spinning color wheel appears. I can see the dock and the main upper toolbar but my desktop is blank and my external hard drives do not load. I can't make any selections with the cursor because of the eternally spinning color wheel, so my only option is to perform a hard reset by depressing the power button until the unit shuts down. When I start it up again the system loads correctly. I have tried ejecting my external drives before shutting down, but this doesn't make a difference. This problem started when I installed Lion OS and got continually worse until the computer finally shut down for good and I had to replace the logic board. Now it's starting to happen again.
Has anyone else experienced this problem running Lion on a MacBook Pro early '08? If so, please help me find a solution for the freezes.

Monitor won't wake from sleep since 10.4.8 update

Since upgrading to 10.4.8 my display (Dell 2405FPW) wouldn't wake up from sleep mode (overnight only) and I'd just get a black screen (although it sounded like the CPU was powering up and working fine) ... but after visiting some Apple discussions I've done some troubleshooting ... and today, the Monitor DID finally wake up from sleep ... but the display was a pixelated mess(!?)
To date I have verified and repaired all permissions. I've zapped the PRAM. I've RESET the SMU and the NVRAM and I have deleted the PowerManagement.plist ... but this problem still persists, and it requires a restart to correct (which is maddening) Could it be an extension conflict? The video card? Power Supply? Sounds like a LOT of ibook and iMac folks are experiencing the very same problem.

Interesting, You, like me, have an undetermined sleep problem and a Dell 2405 FPW monitor with a built in USB 2 hub. Temporarily substitute another monitor to see it the problem persists. Also, did your G5 require a new PCI graphics card?
An ATI Radeon 9600 (PC/MAC Pro) PCI graphics card was installed on mine to handle that large screen Dell. Generally the system works again with a hard restart if it can't wake from sleep--try pushing the tower's front power button for more than 8 seconds and repeat this 8 sec restart if sleep persists. Mine sometimes goes to deep sleep even if the Energy Saver panel shows computer sleep "Never". Since the Dell was designed for a PC the Mac's auto detect mechanism for the sleep state of online monitors may be fooled by something in the design of the Dell monitor--only a theory--my Dell 2405 sometimes goes black and on again with mouse movements even though my sleep corner is turned off. I think I'll try a 24 hours with only my second Sony 17 inch monitor plugged into the card.
Is the USB cable from the Dell USB hub still plugged in? Was your G5 originally equiped with USB 2 ports or did you add a PCI USB 2.0 card? The Dell hub is USB 2.0 and it is logical, maybe even critical, to plug your high speed peripherals and the Dell hub in a USB 2 card while retaining original USB 1.1. ports for your wired keyboard (wireless keyboard might also be a problem) and other powerless (or AC plugged) peripherals--cameras etc.
This may also be a PCI card problem as I had a lesser problems with sleep even before I bought the DEll 2405 FPW and had only PCI SCSI and USB 2 cards from Adaptec. I 'll keep looking for solutions. Post if you find any. For further info see:
http://xlr8yourmac.com/firewire/fwusb_card_deepsleep.html#storytop

Macbook Pro (2008) won't wake from sleep?

Two days ago, a day after replacing an old battery, my 2008 model Macbook Pro refused to wake from sleep. For the past 48 hours it has been doing one of two things.
          A) It will act normally, except that the screen is blank (make the start-up sound, and sound as though it's running when I try to wake it)
           or
          B) Act as if it's sleeping.
I have tried:
-Resetting the SMC
-Resetting the PRAM
-Restarting the laptop from battery power
-Restarting with it plugged in a battery removed
Someone gave me the idea to hook up an external monitor, and see if it's my screen, but it's in the "Don't wake from sleep" stage at the moment. It's is out of warranty, so I want to see if anyone has any solutions or suggestions before I pay someone to take a look at it.
Thanks!

I'm convinced the price of repairs is a ploy to drive up new sales figures! As are these convenient 'catastrophic' hardware issues! It's odd that every post asking about this fault crop up after 4 or 5 years of impeccable reliability, it's like they are self destruct to force you into the clutches of an overly friendly assistant who leaves you wanting to invite them round for Sunday dinner because your nan will adore them! Ahhh well shiny new apple things do fill the void in lives only satisfied by something over priced to stroke and adore!

New MacBook Pro 13" won't wake from sleep

Been having this problem from day one. MBP is only a month old.
Every time the machine goes to sleep it will not wake. No response to mouse or keyboard commands. Each time I have to do a force shut down and restart the machine. Not ideal.
Local tech guys had a look and said taht the machine wasn't saving a sleep image, they fixed that, ran some updates and the first test I did the machine did wake from sleep. Unfortunately that same night it was back to it's same no-wake state.
Anyone have any ideas as to what's happening here?

Not sure if this will help--but my MacBook was having similar problems. It would fall asleep and then when I would try to wake the computer, the screen would stay black but the computer was running.
Here is what I tried:
Turn of your mac
Press the power on button
Immediately after you press the power on button: hold down the following 4 keys:
Command + Option + P + R. Continue to hold them down until you hear your mac make the power on sound twice. Once you hear it twice, let go of all keys.
This should re-set the sleep settings. Worked for my computer, I hope it works for you if you haven't already tried it.

Wakes from sleep when lid closed

i usually put my macbook to sleep by closing it. recently, it sleeps then a second later i hear the noise that it's waking. so while the computer is closed, the apple icon is lit as it's turned back on. ideas?

You might try the following procedure. I did it last night and I think it may have corrected the sleeping problem although at this moment I can't say for sure. A word of warning IF you do this procedure. It takes SEVERAL seconds and maybe even a minute to reboot after you do this 4-finger wave before the computer boots back up. A LONG time looking at a blue screen while I held my breath. This NVRAM procedure is buried toward the bottom in the link below. Since I read somewhere to do this procedure, I didn't get a chance to run through all the procedures listed in the link.
Reset NVRAM [Useful for: does not properly go to sleep; wakes from sleep while lid is closed; fails to wake from sleep]
A number of users report that resetting NVRAM resolves wake-from-sleep issues. In order to perform this process, shut down your Mac, then start it back up while immediately holding the following keys: Command, Option, P and R. Hold the keys down until the computer restarts and you hear the startup sound for the third time
http://www.macfixit.com/article.php?story=20070129234938244

Boot up and wake from sleep noise from superdrive normal???

whenever booting up or waking from sleep, the superdrive seems to make a loud, not grinding, but close to grinding noise.
this noise is on other mbp's that i tested at the apple store, but it's really annoying, like your drive is about to die.
this happens every time on boot up and wake from sleep. do others find this acceptable or normal?
everything else is great. i do have the cpu idle whine, but it's intermittent and running the mirror widget definitely resolves the issue until the next restart.

that's really unfortunate. coming from pc side of computing, i don't recall such an awful sound when booting up laptops tha t had similar drives.
as for previous apple notebooks, i could only comment on the ibook g3 model which had a more pleasing mechanical sound...kind of like whirring(although not a superdrive).
also, a car cd player mechanism is much smoother and much more quiet. apple should pay more attention to this area like bmw does.
the only solution is to keep a cd or dvd loaded in the drive, but peace and quiet comes at the expense of battery longevity.

Bluetooth devices lagging after wake from sleep sometimes.

I have the Apple bluetooth keyboard, magic mouse, and magic trackpad. All batteries are charged and I have tried others by the way. This issue only happens sometimes, as it has happened before, but stopped for a few months, and now happened again tonight. What is happening is that my laptop (macbook late 2009 with mac os x 10.7.2) wakes from sleep (all default energy saver settings set and I am able to wake the macbook with any of the bluetooth devices), and my bluetooth devices mentioned above are laggy for about 15-45 seconds. What i mean by laggy is that when moving the mouse across the desk after the login screen is already fully loaded, it jumps and is clearly not tracking like it usually does. The bluetooth trackpad and keyboard experience this same issue.
Now the thing that leads me to believe it's bluetooth or software is that my macbook's built in keyboard and trackpad do not lag and function correctly as soon as the computer is woken from sleep and prompts me with my login screen. This also leads me to assume that it's not my computer running slowly or having too many processes or not enough memory. This problem happens even if I have no programs running (other than OS X's default processes). I have taken my macbook into the Apple genius bar thinking it was a bluetooth hardware issue, but they ran checks and confirmed that it was not and obciously, we could not get the issue to reproduce their at that time. I would love to hear from anyone who has experiecned this before, or is currently. We need to get Apple's attention with this issue because they have not listened to me when I submit a feekback form. This has been happening since 10.7.0 by the way. Thanks and happy holidays.
macbook 6,1
8gb memory
mac os x 10.7.2 (happened on 10.7.0, and 10.7.1)
-I can wake my macbook with my bluetooth devices
-My built in macbook keyboard and trackpad do not experience this issue
-I don't see the "connected symbol" when the computer wake (everything is already connected)
-All default energy saver preferences set
-Using apple's rechargeable batteries for all three devices
-minimal processes running
-devices function as normal after 15-45 seconds (it's not my desk)

I've got what sounds like the same problem with my new unibody MacBook Pro.
I've had the problem with both 10.6.1 and 10.6.2.
I also find that a reboot fixes things. In my case, I can sleep/wake multiple times with
no problem, but once the BT goes unresponsive upon wake, every subsequent sleep/wake
will suffer the problem until I next reboot.
I also discovered that in my case I can re-pair the non-responsive devices (two flavors
of Logitech mice and an Apple wireless keyboard) while in sick-BT mode and they will
work until I next sleep/wake, whereupon they will again fail to connect and my
choice is either to re-pair yet again, or reboot and have the problem go away, at least
for awhile.
I'm trying to correlate my activity with my BT going out to lunch, but have yet to narrow
it down definitively. I have one or two data points that make me suspect it goes south
after I use VMware Fusion (Version 2), but I cannot yet rule that one completely in or out.
/Kevin

Wake from sleep sound?

Similar Messages

Maybe you are looking for