Wake On Lan Feature - How to enable??

Hi..
I would like to enable WoL feature in certain part of our network. Is there a global command to enable that?. or does it only require 'dot1x control-direction in' interface configuration?..
Also does the WoL Magic packet get forwarded through routers??
Any help appreciated.
Thanks.
GT

Could I just clarify the answer that Rick gave? I fear that it might give the impression that the ip helper-address is on the remote LAN, which it is not.
You should put the ip helper-address on the LAN where you have the management server that is trying to wake up the remote PCs. If the remote PCs are distributed across several remote LANs, you will need one ip helper-address command on the "central" LAN for each and every remote LAN you are trying to get to. You can have as many ip helper-address commands as you need to cover the remote LANs you have.
As Rick says, if you have multiple routers between the server and clients, then the ip helper-address commands only need to be on the LAN that hosts your management server.
What the ip helper-address command does, is to recognise broadcasts on the server LAN, and convert them into unicasts to the address you specify: in my example 192.168.42.255. These unicasts are routed through the network in the normal way until they reach the destination LAN. When they get there, the client LAN's router say "eh-up, this is my IP subnet broadcast address; I had better put a broadcast MAC header on it." But it will only do that if you have configured ip directed-broadcast on the target LAN.
If you think of the way it works, you could even do WoL across the Internet, where you do not have the hand on the intermediate routers.
Is that OK?
Kevin Dorrell
Luxembourg

Similar Messages

Using the Wake On LAN feature

I use software that allows me to turn off the computer, and then have it come back on if I "activate". I believe this feature is called WAKE ON LAN. My questions is what do I have to do to the MAC to get it to do this? Is there something in the OS that I have to say "wait for signal, then start up"
Any help with this would be appreciated!
Thanks
Chaz

You need to plug that Mac into the network(wireless won't work), enable the feature from the Energy Saver pane of System Preferences, and then use a tool on another computer to send it a magic packet.
(56705)

Wake on Lan feature

More of a comment then a query but I'm amazed that the WOL is not implemented correctly. Very frustrating that it only works when a system is in sleep mode. If a PC is off it can be woken up, so why Apple chose not to allow this is beyond me.
This means if I need to image some systems I have to go and switch each one on manually. I'd chose to have each systems default boot-device as the network card so if no netboot foud it'd go and boot off the HDD.

Wake-on-LAN is implemented correctly, in that a sleeping Mac can be awakened by a signal across the network. What you want is Boot-on-LAN, and that's never been a feature of Macs (at least not any I can remember, back to the original Mac models) with the exception of the Intel-based Xserves. But you can submit your comment to Apple via their feedback pages:
http://www.apple.com/feedback

Wake on LAN across subnets

Is there a way to get Zenwork's wake-on-lan feature to work across subnets?
I am not a LAN administrator so pardon any ignorance you see in my
question.
Zenwork's wake-on-lan function won't work on our LAN because our switches
are set to not allow forwarding of subnet-oriented broadcasts, which is a
generic requirment for zenworks wake-on-lan function to work. Our security
folks say enabling this on the switches is not an option because it
introduce a security vulnerbility. I find it strange that there wouldn't
be a solution for this by Novell/Zenworks considering that multiple
subnets, switches, and security considerations are usually a component of
all networks which zenworks is specifically targeted for in the first
place.
Thanks

Originally Posted by Marcus Breiden
On Thu, 07 Sep 2006 22:52:59 GMT, [email protected] wrote:
[color=blue]
it is the only way though.. that's how any WOL software works.. they can
limit the packets comming from either your c1 wks or the zenworks server
though.. otherwise you would require one server per subnet
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
Edu-Magic.net, deceased
Exactly, and this is the best choice. Make "Replication Servers" in each subnet, is very simple. U can use a Windows machine or SuSE, both without installing zenworks. Only registering them as servers satellites. You must install the agent (logically, hehe).

MSI G70 Dragon Edition 2 and wake on lan

Hi everybody.
Does G70 laptop support wake on lan feature ?
Or how i can get wake on lan feature for this laptop.

Here I reply to myself : I think this will be useful to other people, whatever the motherboard model.
So, I just SUCCESSFULLY have been able to wake up my PC from the LAN
Here are my conclusions :
1- There's nothing in the motherboard documentation that explicitly indicates that it's supported. But it is !
2 - I didn't need to connect the LAN card to the motherboard (didn't need any WOL connection)
3 - I have a patched Windows XP. But its standard drivers for my network card weren't enough. I had to install the updated drivers from the manufacturer (admtek).
4 - With these drivers, I could then access, from Windows devices setup tool, to the network adapter APM properties, and I could "Allow Device to Bring Computer Out of Standby".
5. Inside the BIOS, a few things to setup :
Power Management Features
-> IPCA Function : Enabled
-> Power Management / APM : Enabled
-> Set Wake Up Events ... Wake Up On PME# : Enabled
Actually, this means that there is no explicit need for a "Wake On LAN" configuration. It all goes through PME# (i.e. direct PCI) wakeup events.
6. Then it works :-)
The excellent free tool available at
http://www.depicus.com/wake-on-lan/
does the job at the remote computer side (when fed with the valid MAC and IP addresses).
I'm very pleased... but I wish MSI had somehow indicated that the motherboard is WOL capable !
Guillaume

MEGA865 : Wake on Lan?

Hye all !
In theMEGA865 manual I see page 1-5 : LAN wake up fonction!
But In the bios I don't find any Wake-on-lan!
I find Wake-up from PCI card but not wake up by the onboard LAN device?
So I am completly silly or this fonction is not possible?

I prefer to use GUI like this for test : http://www.depicus.com/wake-on-lan/wake-on-lan-gui.asp
and the same in command line for automatization : http://www.depicus.com/wake-on-lan/wake-on-lan-cmd.asp
But the problem isn't "how to use wake on lan" but "how activate the integrate LAN hardware to enable the wake on lan fonction"???
thanks

Wake on LAN does not wake computer

Hi,
I'm using ARD 3.2 on OSX 10.5.2 on a dual G5 system. Its IP address is 192.100.1.102, and it is connected using the built-in wired Ethernet jack.
I can't wake my other computer, which is a G4 iMac running OSX 10.4.11. It is also connected to the network using its built-in wired Ethernet connection, with an IP address of 192.100.1.100. I have also disabled the wireless interface in this system. I have verified that under System Settings, the check box "Wake for Ethernet network administrator access" is checked.
Both systems are connected to a D-Link home router like many people have. Nothing exotic. But when I try to Wake the G4 using ARD, under Manage -> Wake, it does not work. The G4 doesn't respond, and eventually ARD times out and gives up.
However, two interesting points:
1. I found a freeware utility called "WakeUp" at http://www.coriolis.ch/en/wakeup and that is always able to wake up the G4.
2. I have found that if I put the G4 to sleep using ARD, I am then able to wake it up using ARD also.
Any help?
Thanks!

Consumer routers/switches such as your D-Link generally do not support the enabling of directed broadcast packets, which are required for use with the wake on LAN feature, so that may be the problem.

Wake on lan with Iphone.

Hi, I installed a wake on lan feature on my MBP from apples homepage and likewise I installed the iWOL app on my iphone. However I cannot get it to work. At home I use Airport express connected wirelessly to the MBP and likewise with the Iphone. Do I have to configure the airport express or something? Or does anyone have a step by step guide on how to set it up?
Thank you very much

its right , router has to be connected to Ethernet port.
ary you trying to wake your Mac on your local network ( meaning when you are conected to your router through wi fi directly ?) that is not to difficult to achieve . little tricky bit is if you want to wake your Mac
from remote location from your iphone , well literality from anywhere . it can be done but not all routers will allow you to do that . but it can be done with right router . plus there's quite a bit needs to be changed in correct router's configuration. but good thing is if you really want that to happen there is a possibility .
for my needs its essential . i use iwol and SleepOver apps. both of them do same thing but first i got iwol
and only could wake my MP locally . then i tried SleepOver app and i achieved both Local Wake up and over internet too . again both can achieve same things but i wouldn't have done it without good support and recomendations of SleepOver's developer .
so if you get it working either of them IWOL or SleepOver is a fantastic combination with Jaadu VNC and File Magnet apps . you can wake your Mac from say Paris in London then use Jaadu VNC app to browse your remote Mac as if you were sitting in front of you Mac at home the open other end of File Magnet from within Jaadu VNC which is installed on your mac and drag and drop file you want to have on your iphone . then you open File Magnet on your iphone and there they are! file you wanted .

E900 Wake on LAN/WAN

Helly community!
I'm fairly new but would like to ask someone for help.
I would like to configure my PC to be able to use wake on LAN/WAN mainly for power issues, so I don't have to have it on all the time to access anything I need. I bought a Linksys Cisco E 900 2 weeks ago. Now I am getting really frustrated since as far as I know I did configure everything needed for it but it does not seem to work nor through WAN or even in LAN.
What I did so far is:
1. In my BIOS I could not find a seperate wake on lan option under power management but I did find a "Power on by pci(e) device which I have enable.
2. I have a built in Realtek Ethernet card on my motherboard. In the setting I:
Shutdown wake on lan - Disable
Wake on magic packet - Enabled
Wake on pattern match - Enabled
Also the option to allow this device to wake up the computer using magic packet is also ticked.
3. I use Windows 7 and have installed and started Simple TCP/IP Services
4. I opened up UDP port 9 in Windows Firewall
5. I have set single port forwarding in the E900 to my reserved IP for both TCP and UDP port on port 9 and just in case port 7.
After all this it is not even working inside my LAN. Also I tried a port scanner and checking for open ports and UDP port 9 doesn't seem to be open. Why is that? Did I configure something wrong in the router?
If someone could help me I would really appreciate it.
Thank You in advance!

Wake on LAN (WoL) is a technology that permits someone to turn ON a computer remotely. The network adapter on the computer listens to network activity and will turn the computer ON once it receives a special data packet called a “Magic Packet” that triggers the boot up. Wake on LAN is also referred to as Remote Wake-up.
For Wake on LAN to work on a computer, it must have the following:
•   a wired connection to an active computer network
•   motherboard
•   network adapter and adapter driver that supports the standard Magic Packet format
•   computer basic input/output system (BIOS) configured for WoL
•   an operating system that supports WoL
•   all routers between the remote location and computer required to WoL must allow IP directed broadcasts and support IPv4
Title: Wake on LAN feature and settings Article ID: 21418
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=20e3824721bb44f6afb3093679a7e883_21418.xml&pid=80...
Power Saving Remote Computing
http://www.instructables.com/id/Power-Saving-Remote-Computing/step2/Enabling-Wake-On-LAN/

Can't Wake-On-LAN up iBook from Sleep Options

Seasons Greetings!
I can't get my 1.25gHz eMac to wake my 900mHz G3 iBook from sleep to
auto backup overnight via the Wake-On-LAN feature using an Ethernet
connection and Wake 550. I set the Administrator Wake tab in the
Energy Panel and looked up my iBook's Machine Address in the Network
Utility to type into the Machine Address box in Wake 550 but no go. I
even put in the IP and my iBook still sleeps. Any hints?
Thanks!
JimWG

I'm starting to wnder if the PB has a Wake-On-LAN compatible ethernet card!?
Or if maybe you have something like a Cat-3 cable that doesn't have as many lines as a Cat-5e/Cat-6 cable?
After hours of experimentation WOL, 550, & Nudge all work reliably for waking if you have a WOL Ethernet card, somewhere above a Cat-2 cable, even if the originator is Airport only to an Ethernet Router that the others connect to.
Can't find much info as to which Macs have WOL capable cards except that up to the original iMac they didn't. I'm thinking maybe a G3 Powerbook doesn't since it's on the list of needing a Crossover cable to connect to another on that list...
http://docs.info.apple.com/article.html?artnum=42717

Wake-over-LAN with WRT54GX2

I'd like to wake up my computer over the internet, so I'm trying to use the Wake-on-LAN feature.
I can get it to work when waking from the local network....but I can't over the internet. I've read that I need to forward the right port to 192.168.1.255, but I can't forward to that address.
Is there anything I can do?

hoping someone can help me here, as I want to accomplish WOL in my workplace. I'm in a building that has a central router that divides the internet into 4 different offices (into jacks in the wall). The central router is a linksys befsr41 that I don't have access to because it belongs to the property manager. The central router's ip address is 192.168.1.1 This router is not wireless, but I need wireless in my office, so I have my wrt54gc in my office to use with my tablet pc. I've gotten my computer to wake up no problem over LAN at home, over WAN at home (from remote location), but when I'm at my office (2 routers chained together) I don't know what I need to do to get it to work consistently. So my questions are: 1. What settings, if any, do i need to change on the central router? Do I need to port forward to the IP of MY router (or my CPU)?? 2. Same question for my router? I've looked all over the net and can't find any info on what to do for WOL in a multiple router environment such as mine. I guess I need to somehow tell that magic packet thingy to go through the central router, then through my router, and recognize my MAC address and ip. I really appreciate help in this matter.

Wake on Lan questions

Hey,
I remember way back when I was using a PC that I could actually boot my computer through the network, using the Wake On Lan feature on the motherboard/bios.
Is this possible to do on a MBP?
I'm not talking about "waking it", as if it was asleep, I'm talking about "wake" as in start/boot up.
If this is even possible, I guess it's limited to Ethernet only and not supported by Wifi.
But would it be possible for the sender of the wake-up package to be on Wifi (from say an iPhone or another MBP connected with wifi).

I found out this is not a problem with iWol, its about configuring the router correct.
Check this out, it helped me solve my problems:
http://forums.hexus.net/abit-care-hexus/113591-issues-wake-lan-ab9-pro.html
http://forums.dlink.com/index.php?topic=5934.msg41217#msg41217

TimeMachine to G4 via Network - Wake on LAN , Standby, Sleep

Hello,
I want to backup to a G4 running 10.4.11, wich is capable of Wake on LAN.
How may I make Time Machine automatically wake up the G4? Right now I am using
http://www.readpixel.com/wakeonlan/index.html
manually.
Bye
Jason

All,
I have a g4 MDD that I have set up to Wake on LAN. I
have another computer (ibook) setup to send the Wake
on LAN magic packet. This works fine and the MDD
awakens from sleep after sending the packet.
However, in about 10 or 15 seconds the MDD goes back
to sleep again. Why??
Thanks,
-BL
More background info:
Rather than sending the WOL packet over the network, I walked up to the sleeping MDD and hit the spacebar. It awoke, then went back to sleep about 15-30 seconds later. I hit the spacebar a second time and then started to use the computer (Logged in, checked a few sites in Safari, etc) and the computer remained awake.
So I guess my more directed question is: why does the MDD go back to sleep when there is no input/usage?
Thanks again,
-BL

How to enable Wake On Lan on MSi P45 Neo2?

Hi,
I just bought a P45 Neo2, and I think I have WOL on this machine, as the Realtek chipset 8111C does support the feature. However, I'm not sure how to
- enable
- use
the function. Can you help me?
Under Device Manager, I go to the Realtek network adapter --> Properties --> Power Management --> Allow this device to bring the computer out of standby.
Now, it is enabled. How should I use it? I would be very thankful :-).

Please have a look here first for basic introduction to Wake on LAN and "Magic Packets":
http://en.wikipedia.org/wiki/Wake-on-LAN#How_it_works

How to Enable Wake On Lan over the Internet??

Hi, I am using RV220W with the latest firmware, I want to make "Wake on LAN" work for my NAS, I found the following description on Internet:
"If you wish to use Wake On Lan over the internet you will need to set up your destination firewall/router to allow "Subnet Directed Broadcasts". Most routers and firewalls disable this option by default.
You will then need to allow traffic through on your firewall/router on a specific port. The choice of ports is up to you."
So how can I enable "Subnet Directed Broadcasts" on RV220W??
Thanks.
Raymond

Hi Jasbryan,
If RV220W doesn't forward UDP to a broadcast address, could you ( i.e. Cisco) provide a tools for sending WOL Magic Packet to the LAN on Router Device Manager page?
I see many routers also provide this tools from their manager page.
Thanks.
Raymond

Wake On Lan Feature - How to enable??

Similar Messages

Maybe you are looking for