Wake on wireless possible? Disable sleep when lid closed?

I just bought my first Mac & am still trying to figure some things out.
Is there a way to have it wake on wifi? I like to be able to connect to my machines when I'm at the office. My Macbook goes to sleep & then I can't remotely access it. Wake on LAN works fine, but I don't want to keep an ethernet cable plugged in.
Another thing I can't seem to get is how to disable the Macbook sleeping when I close the lid. On my old Windows laptop, I'd often put on a podcast & listen while falling asleep & have one start as an alarm clock in the morning. I like to keep the lid closed to keep out dust, etc.
I found a 3rd party app InsomniaX, but would rather find a supported way of doing this.

Insomniax is your best bet. The only other way would be have an external monitor, keyboard, and mouse hooked up.

Similar Messages

Computer not going to sleep when lid closed

My wife's new MacBook Air has a couple of problems we can't figure out. First sometimes the computer is not going to sleep when lid is closed and when we lift the lid everything is frozen.
Second, the user Library folder is not seeable in her user account. I know it's there because on the side bar there's a short cut to Preferences folder which we can open.
Strange behavior.
Thanks,
Ron

Ron,
The user library folder (~/Library/) is hidden by default in Lion. I assume Apple doesn't want people mucking around with the sensitive files in there. So this is normal behavior.
As for the freezing issue, I would suggest you reset your power management and perform a safe boot to clear out caches. You should also see if the issue persists after disconnecting USB perhipherals.
Here's how:
Power Management:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Safe Boot:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

MB pro not sleeping when lid closed

Hi, I came to work today, opened my backpack and found my laptop extremely hot in its sleeve. It appears it had not gone to sleep when I closed the lid. It then failed to run properly for about 20 minutes until it cooled down. Now it is ok, except that it will not run in lid-closed mode. I plug in my external display, put it to sleep, and wake it back up with the lid closed in order to use the external display. The display fires up for a few seconds and then turns off again. I've tried this over and over again, the computer simply won't stay on for more than a few seconds. However, when the lid is opened, it will run the external display in mirrored mode just fine. I think something is toast. Coincidentally, I had just downloaded the keyboard update 1.0 a day earlier... Anybody know why my computer is not sleeping when I close the lid and why it won't work in closed-lid mode anymore?

I've had a similar problem since I first got this a year ago. Sometimes when I shut the lid, the display does not go to sleep, and sometimes it restarts automatically when I shut the lid! I've also found it very hot at times when it should have been sleeping. So far, it's only been a minor annoyance.

Automatically wake from sleep when lid closed?

I would like my MBP to wake from sleep when the lid is closed (no external monitor attached) in the middle of the night to initiate a backup to another computer. Is it possible to get the computer to wake up with closed and nothing attached? Do I need a third-party app to do this?
Thanks
Brian

But, that won't wake the computer up if the lid is closed and nothing else is hooked up to it. I want to wake it up in the middle of the night when the lid is closed and it is hooked up to a power supply.

Wakes from sleep when lid closed

i usually put my macbook to sleep by closing it. recently, it sleeps then a second later i hear the noise that it's waking. so while the computer is closed, the apple icon is lit as it's turned back on. ideas?

You might try the following procedure. I did it last night and I think it may have corrected the sleeping problem although at this moment I can't say for sure. A word of warning IF you do this procedure. It takes SEVERAL seconds and maybe even a minute to reboot after you do this 4-finger wave before the computer boots back up. A LONG time looking at a blue screen while I held my breath. This NVRAM procedure is buried toward the bottom in the link below. Since I read somewhere to do this procedure, I didn't get a chance to run through all the procedures listed in the link.
Reset NVRAM [Useful for: does not properly go to sleep; wakes from sleep while lid is closed; fails to wake from sleep]
A number of users report that resetting NVRAM resolves wake-from-sleep issues. In order to perform this process, shut down your Mac, then start it back up while immediately holding the following keys: Command, Option, P and R. Hold the keys down until the computer restarts and you hear the startup sound for the third time
http://www.macfixit.com/article.php?story=20070129234938244

X120e does not sleep when lid closed

I found another similar post, however it was resolved by the individual reinstalling the operating system.
My issue is more complicated. I have made sure everything is up to date, all the settings that tell the system to sleep when the lid is closed are turned on. I have even turned those settings off off, just so I could turn them back on to make sure there wasn't something quirky about it.
I have tried restoring the system to factory settings using the recovery partition, as well as discs burned from the program that came with the computer. I have tried clean install from Windows 7, 8, and 8.1 discs.
The unit still does not sleep. I don't ever remembering it being able to. I once closed the display thinking it would sleep (power was plugged in). Woke up the next day, went to work for 8 hours, came back and felt that the system was really hot. Opened the lid and the screen was exactly as I had left it the day before.
When I first got the system in 2012, the screen did not work, so I actually had to send it to Atlanta, GA for repairs. It came back quickly, and it still did not work, so I actually sent it back to Atlanta, GA's repair center a second time in the same week. It came back working and I left it alone. I never tested the sleep/wake because I always just turned the system off when I was done with it, but now I am back in school and this little computer comes in handy, but I don't want to turn off the system manually going from class to class when I need to pack it away in my bag.
Could there be a hardware issue? Something inside not connected? This laptop works perfectly EXCEPT for the fact that it will not sleep when the lid is closed. It is out of warranty but had I known this was an issue while it was still under warranty, I would have inquired. This unit is in pretty fantastic shape, looks brand new too. No damage, never been dropped, and only ever handled by me (never loaned out).
How can I fix this?

Thanks for the reply, gat0gelat0.
Yes, those settings were the first things I checked. I also tried changing it to "Do nothing", then changing back to the sleeping option. It still does nothing when I close the lid.
I would like the functionality of it going to sleep when I close the lid for the convenience, like when class ends, I have to rush to my next class, I just want to close the lid, put it in my bag and run to the next class. Keyboard shortcuts like Fn-F4 work, but this laptop should have the functionality I am describing, and I want to figure out why it isn't working and how to fix it.
I suspect there is an issue with whatever is used hardware wise to sleep the machine. Either it's not being triggered, or it's not there, or it's broken. I've tried running a magnet around the bezel of the LCD screen as well as around the palm rest bezel and there is no activity as I've read that many laptops trigger sleep by interaction by a magnet. Still nothing.

MacBook Pro does not sleep when lid closed

Hi there. I recently upgraded my MacBook Pro from Snow Leopard to Mountain Lion. Before the upgrade my mac would sleep automatically when the lid closed. However, ever since I've upgraded, when I close the lid, my mac doesn't go to sleep. However, if my mac isn't plugged in (running off the built in battery) it goes to sleep. I looked through system preferences and I can't seem to find any settings relating to this, does anyone have any suggestion on what's happening and how I can fix it? Many thanks in advanced.

Test after each of the following steps that you haven’t already tried: Step 1 Apple menu > System Preferences > Print & Scan > Open Print QueueCheck all printers for unfinished jobs. Deal with any you find. Step 2 Apple menu > System Preferences > Energy Saver > Power Adapter > Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password. Step 3 Apple menu > System Preferences > Energy Saver > Schedule > Start up or wake: uncheck. Step 4 Apple menu > System Preferences > Sharing: uncheck all boxes. Step 5 Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable. Step 6 Launch the Activity Monitor application. Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately. Step 7 Reset the SMC. Step 8 Boot in safe mode and log in. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you clickLog in.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal. Don’t launch any applicationsat first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested. If sleep now works as expected, go on to the next step. Step 9 Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way. Step 10 If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment. If you still have the sleep issue after booting out of safe mode, post again.

MB: Won't sleep when lid closed and power connected.

Upgraded to Lion a few days ago and everything seems to be working great besides one thing:
When I close the lid on my Macbook (mid 2009) and the power is connected, the light remains on and the computer won't sleep. When i lift the lid everything is how I left it with no blink of the screen as it fires back up. However, when the power is disconnected, the computer sleeps fine when the lid is closed.
How can this be solved?
Thanks!!

OK, think I found my problem.
I had to send my laptop in for repair due to a faulty screen. When I got it back it all looked OK so the first thing I did was install Lion. Then I noticed the sleep issue so assumed it was Lion causing it. I tried the pram, SMC other settings but nothing helped. In the end I reinstalled Snow Leopard, same problem! I tried from bootcamp and same problem, wouldn't sleep when closing the lid.
Doing some googling I found a post where someone has the magnet in the display fail, which is what contacts a switch in the laptop when you close the screen. To test they suggest placing a paper clip on your screen bezel until it sticks to find the magnet, then finding where it locates when closing the screen on the laptop. Then run a small magnet (i used a small fridge one) over this location on the laptop with the screen up. I did this and instantly went to sleep!!! WOOHOO! remove magnet it wakes up, repeat and OK. Close screen without magnet and nothing.
So its gone back in for repair to have the screen replaced again.

Prevent Sleep When Lid Closed on PowerBook

I hate to limit this question to only 12-inch PowerBooks since it is common to all Mac laptops, but since that is what I own, I'll put it here.
Basically, the title sums it up. I've seen some other similar questions on the forum but none have been answered with a satisfactory answer for me. It seems I have two options:
1) Connect display, mouse, and keyboard -- I've tried this and it works, but this isn't the solution I'm looking for.
2) Install some application, I forget the name but it has a red light bulb as an app-icon ... tried that and didn't like it and didn't get it to really work.
So ... here's what I'd like to do. When I close the lid on my powerbook, I'd like the display to turn off and nothing else. The network, audio, and disk drive, as well as everything else, stays active.
If I want the system to sleep, I will choose the sleep option from the menu and close the lid. Simple as that.
It is hard for me to believe that the closing of the lid *must force* a sleep, there has to be something that can be done to prevent it, right?

I agree, this needs to be a topic for all laptops from Apple.
I also need a quick, non-hardware way to accomplish this.
It seems it should be (at it's most complicated) an option accessible through Terminal or System Prefs, but it appears that it's not.
It really should be built into the OS, to auto-recognize that the OS is running on a laptop, give the option to the user (through system prefs, to have a one-click switch icon in the menu bar, to cause "No-Sleep on Lid Close", when activated.
I would call this function "Brooklyn" as in No Sleep til Brooklyn. It should also add the ability chose whether or not the screen comes on, and/or the computer wakes, upon opening the screen.
The track-pad mouse-button should also come default set to menu-click (right-click) when there is a finger on the trackpad, but this should be built into the OS, and it should be a preference setting. Otherwise, they really need to add a seperate button. Menu-clicking is just to useful.

Any way to prevent macbook air from sleeping when lid closed?

I believe there is no way to keep your macbook/air running when you shut the lid.
I am running a background job where I am downloading a huge amount of data from the internet, which is coming through slowly (other applications could be where I am running a web server....). I want the machine to be running, but not keep the lid open - since I might want to move the laptop, not leave the screen/keyboard exposed.
Where can I request Apple to add support for this behavior? Or did they anticipate this request in Mountain Lion already?
Any suggestions? Others who would like the same feature?

NoSleep makes closing of your MacBook lid possible without going into sleep mode. Now you shouldn't plug your mouse and monitor to stay computer awake - just check a tick in the System Preferences and continue downloading of huge files and watching favorite movies over the network with lid closed.
here you go : http://lifehacker.com/5934158/nosleep-for-mac-prevents-your-macbook-from-sleepin g-when-you-close-the-lid

Macbook Pro not sleeping when lid closed

Since upgrading my late 2011 13-inch Macbook Pro to Yosemite, I've noticed that it does not go to sleep properly when I close the lid. While the screen does turn off, the white LED remains on at full brightness and the fans spin up to maximum speed. When I open the lid again, the fans slow down but the screen doesn't turn back on until I press a key. This suggests it wasn't sleeping at all and the display saver simply activated.
If I use the Apple menu (top left) to enter Sleep mode, wait for it to go to sleep then close the lid, it sleeps properly with the white LED glowing slowly.
I have checked the Energy Saver preferences, and there is no Sharing set up so I doubt that's the problem. Is anyone else having this issue? Any ideas how to fix it?

Similar issue after upgrade w my MBP (early 2011).
Close the screen with apps open... climb into bed... the laptop appears to enter sleep BUT several times thruout the night I hear the optical drive spin up along with the hard drive and screen glow (visible w screen closed as a glow)... then... it goes back to sleep (must detect closed screen).
Weird.
Did not do so with prior OS installs (not hardware issue... related to Yosie install).

IBook won't sleep when lid closed

Hi -
My iBook refuses to go to sleep when the lid is closed. It will sleep if I put it to sleep from the Apple menu, but never just from being closed. (And sometimes when I put it to sleep and then close the lid, it keeps waking up and making crunching noises.) I've tried everything I can think of to fix the problem, including: resetting the PMU, deleting a bunch of background programs, and reinstalling the OS. It's been doing this for about 6 months, and it's driving me crazy. Any ideas? Please help!

Hi skywriter,
Welcome to the Discussions.
Has the iBook's case ever been opened? There's a magnet on the bottom side of the top case that activates the sleep switch. Hold a small magnet on the right side of the screen and see if it will sleep. If it does, the magnet isn't where it's supposed to be and will need to be replaced.
John

IBook will not sleep when lid closed

Hi,
I recently had my Hard Drive replaced, the old one died. It was all covered by AppleCare and the repairs done at a Apple Authorised Outlet. After installing everything again I just found out that my iBook will not sleep when the lid is closed. The screen is still on and bright. Any ideas why? Is this dangerous? Any quick fixes?
Cheers,
Jack

Jack,
Welcome to Apple Discussions.
You need to give the Apple Authorized Repair center a call back and let them know what's going on. I've seen this before here on the forums, and it was attributed to a sleep magnet not being put back in. It's most likely this. Apparently, putting this magnet back in can be easily overlooked.
Brian

Macbook Pro won't go to sleep when lid closed

Hello,
I'm sorry if this issue has been raised elsewhere, but despite numerous searches all I can find is people who want to stop their MacBook from going to sleep when the lid is closed. I have the opposite problem, I want my machine to go to sleep when the lid is closed, but it won't. I have a 2011 model MacBook Pro, with Yosemite installed. A couple of months ago the logic board failed and had to be fixed. I installed Yosemite before the failure, and the problem with the machine not going to sleep occurred then as well, so I don't think the problem is related to the hardware repair. Does anyone have any idea how I can make this machine go to sleep when I close the lid?
Thanks,
David.

I had the same issue on a Macbook Pro mid-2012. In my case when the display would go to sleep it would turn itself back on, display the login screen, go back to sleep and then repeat.
Reading through multiple posts I ended up with following observations/actions:
I ran pmset -g assertions and saw that the only thing that was set to keep my laptop awake was UserIsActive.
I checked my logs and noticed multiple entries for WindowServer: handle_will_sleep_auth_and_shield_windows: Deferring.
None of those gave me much information about what I can do. After that I read the post that fixed the problem:
I booted the laptop into safe mode. Waited for the display to sleep, woke it up and then restarted in normal mode. This seems to have fixed the problem for me so far.
Hope that might help someone else in the future.

New Macbook Pro 17" doesn't sleep when lid closed, but works if done manual

I never had this problem with my last macbook pro. This is the new unibody 17"
The computer will not go to sleep when I shut the lid. The screen stays on (the apple logo glows). And the little light on the right stays solid (no blinking).
Yet, when I go to the apple in the top left of the screen and manually put the computer to sleep, it goes to sleep very normally.
Please Help!
Tim

Try resetting your SMC.
Resetting the System Management Controller >>
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Wake on wireless possible? Disable sleep when lid closed?

Similar Messages

Maybe you are looking for