Wake up problems with MacbookPro (Model 6,2)

Hello everyone,
I have updated my MacbookPro on lauch day and first I send a very big thank you to all guys worked on Lion. The installation process was flawlessly and comfortable. You've done a great job. Machine feels faster and working with gestures is very comfortable.
After using my machine for 2 days now I have to admit that my Macbook has several problems with waking up. If I close the lid for a few hours (f.e. over night) the fans go up after a while, the system gets hot and cannot wake up when I open the lid. The only help is hardly to shut it off and to boot it up afterwards.
At this time I will shut off the system after using it and boot it up every time I want to work. But waking up was always so perfect on Mac OS X.
Would you please fix it again, soon?
Kind regards,
m3x

No, you can't use the Thunderbolt Display because, as you note, you have no Thunderbolt port. You can use the Apple Cinema Display, however.
Clinton

Similar Messages

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

Problem with Data Model and Analysis View

I create an analyze in BI Publisher and then i create a data model using this object.
When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
So i was check the analysis and all looks appears to be fine, In the results tab it show me a complete table with the data i was looking to use.
So i try to repeat the error and when i try to create the XML for the Data Model i found this two error in the logs:
[root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
        at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
        at java.lang.Throwable.<init>(Throwable.java:196)
        at java.lang.Exception.<init>(Exception.java:41)
        at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
        at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
        at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
        at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
        at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
        at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
        at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
        at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
        at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
And when i try to view the report that use the analysis i got this two warning in the logs:
[2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
Any ideas about how to solve or debug this?
Thanks

I follow your instructions and it works fine. I can create the XML and the reports can show data.
So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
Any idea how to debug it?
Thanks.

Problem with ViewSonic model vx715?

ViewSonic vx715 turns on then goes dark or shuts off. When I turn it on with input cable in it, the power light turns green, then clicks to orange or simply just shuts off. Ive looked at other forums saying it was a default in the model. Something to do with a capacitor or soldering. I took the thing apart and found nothing wrong with either. Any suggestions?

I have a Power MacG5 behaving exactly the same way with a large Westinghouse (LCM.22W) LCD Monitor. The problems began when I decided to enable the sleep function to save electricity. For years it worked fine and the sleep problems into an unwakable black screen started on and off with me doing the same to remedy it: restarting or unplugging and replugging the DVI 400 cable (Monster Digital Video)from the CPU DVI port. Now nothing works as a remedy. I have no alternate monitor to use to access the CPU. Now when I reseat the DVI cable the monitor says check connections indicating it isn't hooked up to a DVI output video source even though it is.
I'm starting to wonder if the problem is the G5 video card in the CPU and not the cable or the monitor since I'm not the only one who has experienced the problem with a large monitor when the computer goes to sleep and the monitor shuts down.

Saturation problem with 741 models

Whenever I saturate a 741 op-amp by exceeding the limit of its positive supply voltage, the output saturates to the negative supply voltage.
For example, if I construct a voltage follower with +/- 15 V supplies and an input of +20 V, the output is (roughly) -15 V, not +15 V.
This occurs with a variety of 741 op-amp models, such as LM741*, UA741*, 741, and Op-Amp_741.
I saw similar problems with a few other op-amp families I tried.
Is this a known limitation of these models in Multisim, or am I doing something incorrectly?
See the attached file for an example.
Thanks,
Bob
Solved!
Go to Solution.
Attachments:
satprob.ms10 ‏178 KB

yyao wrote:
Hi,
This problem may be due to JFET inversion. Some opamps, especially JFET opamps, exhibit this behaviour. When the output is expected to exceed some positive threshold, the output inverts to the negative rail. If you hooked up a JFET opamp in a real circuit, you will see this behaviour. So, this may have to do with the opamp model that you are using. If this is not the behaviour that you expect (i.e. not what you observe in a benchtop setup), my best suggestion is to substitute your simulation opamp for another one that is similar in performance, but does not exhibit the same output inversion.
Take a look at this page by Analog Devices. This phenomena is outlined in the section labeled "What other features of op amps should the user know about?".
Hope that helps.
I don't think it is the "phase inversion" problem described in the first paragraph of the aforementioned section. I don't think the 741 is a JFET or the common-mode input is too negative.
However, it does seem to be consistent with the "more serious form of latchup" described in the second paragraph. The issue occurs when the input exceeds the rail voltage by ~0.6 V, which could be turning on some internal diodes. The page suggests that this would destroy a real op-amp. In simulation, the op-amp wouldn't be destroyed, but it might show erratic behavior when Vin > Vrail.
Does this make sense to anyone else? I'll try to remember to test this with a real op-amp next week.
Message Edited by btriffles on 03-17-2009 07:52 PM

2 problems with tv model number 55sl417u

Alright, I have been having two problems with this toshiba tv. One: It will just randomly shut off while watching tv or playing video games. It will shut off and then after 45 seconds it will come back on. Second problem is that i will not be able to shut it off using the remote or the buttons on the tv. Its like it freezes. To get it to turn off i just shut off the power strip for 30 seconds then turn it back on. The tv will then turn on and i can turn it off. I dont know whats wrong or what to do. Can anyone help?

Yeah it randomly shut off on me two hours before the super bowl sunday and did not turn back on. The clicking sound was made the picture would not come on and was left with three green blinking lights. so after spending an hour on the phone trying to get someone from customer service, they told me some one from Nexicore would contact me Monday. I waited till about 5 Monday for a phone call and never got it. So i decided to call Nexicore myself and they told me they were waiting for my local tech guy to receive a part from Toshiba. It could take 3 to 5 business for him to receive the parts, so now i am waiting for a phone call from that guy. If i dont hear anything by friday i will be calling Nexicore again to check on the status. Such a pain for a tv that is only a few months old. Thank god it is under warrenty

Problem with new model MC14013BCP

Hi, what's wrong with this model???
<attachment removed>

Mike_85_,
It appears the link to this model provides for an IBIS implementation only (I-V curves) and not SPICE.  While this gives you some idea on I/O transfer curves, it does not provide any functional implementation data. Multisim does not currently support IBIS modeling, only true SPICE models are supported.
This is a D flip flop and there are several 'generic' models that can be easily adapted to fit some of the specifications of this device using a D-chip device.   I would suggest going to the TIL family of digital components and look for a similar device D flip flop device.   Look at the model and you'll see what parameters you can change.
This thread provides some additional details on the d_chip implementation (this is a customized Multisim 'X SPICE' model).
http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/models-using-d-chip/m-p/953453#M6602
If you are interested in the exact I-V I/O characteristics, it is possible, but requires additional work and this is a more in depth topic than is intended for this forum.   Let me know and we can offline this topic if the exact I/O characteristic is needed.
Regards,
Pat

WRT54G General problems with this model

Has anyone else seem to find that WRT5G4 Routers always seem to be having problems? Im having a problem ( I think I fixed it though thanks you to guys) My friend always has a problem with it not dialing though his PPP0e. And both my neighbours have a problem with it droping the signal. Or maybe I have had bad luck with them.

i have had problems with this one too. it keeps dropping my signal. i have v.8 i was told to upgrade my firmware but it is a .bin file and i am not sure how to access the file. anyone have any ideas?

Problem with Table Model Listener

I hava a JTable with three columns and dynamic number of rows. The first column has a text. Second column has check box and each third column has three radio buttons. I am using the table model listener to fetch the row and column which the user clicked. here is the code
public void tableChanged(TableModelEvent e)
row = e.getFirstRow();
column = e.getColumn();
TableModel model = (TableModel)e.getSource();
String columnName = model.getColumnName(column);
Object value = model.getValueAt(row, column);
System.err.println("Value: "<em>value.toString()</em>" Row: "<em>row</em>" Column: "+column);
attendanceModel.setHolidays(row, value.toString());
}Here is the problem
{color:#ff0000}Case 1{color}: When I click the first radio button in first row and third column it works and the output of print statement is
*{color:#993300}Value:0 Row:0 Column:2{color}*
{color:#ff0000}Case 2{color}: Next I clicked the first radio button in second row and third column the method is not called nothing is printed
{color:#ff0000}Case 3{color}: Now I clicked the first radio button in third row and thrid column, the method is called and the output of print statement is
{color:#993300}*Value:0 Row:1 Column:2*{color} ; but the actual value of row should be 2*. Here it is showing the row and column of the previously selected item.
But in {color:#ff0000}case 2{color} instead of first radio button if I selected the second radio button the print statement will print the correct value i.e
{color:#993300}*Value:1 Row:1 Column:2*{color}
ie If I select different radio button in each row the print statement shows the correct value. But if in each row the same radio button is selected its not working properly. For first row it prints properly. If same radio button is selected in second row the method is not called. But from next row onwards the row value is showing the previously selected row as in {color:#ff0000}case 3{color}.
But for the checkboxes in column 2 the same is working properly. Each column has only one check box. So when I select the check box in each row the row and column values are getting changed accordingly.
Could some one help please?
Thanks,
Zach.

To get better help sooner, post a [SSCCE (Short, Self Contained, Compilable and Executable, Example Program)|http://mindprod.com/jgloss/sscce.html] that demonstrates the incorrect behaviour.
db

Problems with macbookpro

I seem to be having some issues with my macbook pro. I love it, it is a great laptop, but it has recently developed a strange sound from the back left. I thought it was the speaker, but its a constant noise, like a grinding/grating sound, presumably its the fan. I am booked into see a genius at Meadowhall this friday, but this is my only computer, and being at uni, I cant be without it. Can it be fixed in store, if its just a fan issue?

Hi Adam, and welcome to the forums.
It is not a difficult job, but these things often depend on how busy the place is and whether they have the part in stock.
Not sure whether you have the 2.66GHz model with a removable battery or the later model with the "fixed" battery.
See http://www.ifixit.com/Guide/Repair/Installing-MacBook-Pro-15-Inch-Unibody-Late-2 008-and-Early-2009-Left-Fan/829/1 to get an idea of what is involved with the "removable battery" model. The process with the later "non-removable" battery models is pretty much identical and , in fact, exactly the same fan is used.
Why not give them a ring, indicate the nature of the problem, and see if they will be able to find time (and have the part) to do it on the spot if the need arises.
Sometimes, by the way, all a noisy fan really needs is a good clean.
Cheers
Rod

Problem With Charger Model A1265

Hi everybody, well a friend gift me a charger Model A1265 for my iPod Touch 4g and its charge the batery, but with one problem, when my iPod its connected to the charger the screen is very sensitive, I mean, I touch the screen to open an app and suddenly the screen opens another app or another option, my question is why this happend? and if that charger doesn't decompose my iPod in any way, the screen, the batery life or something? or when is connected to that charger I dont have to touch the screen? hope anybody here can solve my doubt

Thanks For your answer, look I post more pics of the charger, yep that have the green dot, so do you think theres no problem about the screen or something?

Something was corrupted and now have a Problem with AW Model view ..

Hi,
I'm having a problem creating and viewing the model view for an AW using AWM ver 10.2
I right click on the Analytic workspace and select create analytical workspace from
the drop down list.. I give it a name and it seems to create it successfully ie it
appears in the list with an (attached RW) next to it.
However when i try to expand it .. a message appears .. reading analytic workspace..
and then I get an error message unable to attach analytic workspace.
It was working fine in the past and does work against another server..
Also i can open it in the object view so it must be related to the model view.
any ideas what I could check to diagnose the problem or what might have been corrupted on the server
that could cause this ..
.. the error messages are below
thanks
Mike
oracle.AWXML.AWException: java.lang.NullPointerException
at oracle.AWXML.AW.readAWDefinitions(AW.java:1341)
at oracle.olap.awm.dataobject.aw.WorkspaceDO.getModelAW(WorkspaceDO.java:739)
at oracle.olap.awm.dataobject.aw.WorkspaceDO.getModelAW(WorkspaceDO.java:701)
at oracle.olap.awm.dataobject.dialog.modelview.ModelerListPanel.showData(ModelerListPanel.java:244)
at oracle.olap.awm.dataobject.dialog.modelview.ModelerListPanel.<init>(ModelerListPanel.java:86)
at oracle.olap.awm.app.AwmFrame.selectionChanged(AwmFrame.java:4098)
at oracle.olap.awm.navigator.Navigator.fireNavigatorEvent(Navigator.java:149)
at oracle.olap.awm.navigator.Navigator.propertyChange(Navigator.java:129)
at javax.swing.event.SwingPropertyChangeSupport.firePropertyChange(Unknown Source)
at javax.swing.event.SwingPropertyChangeSupport.firePropertyChange(Unknown Source)
at javax.swing.event.SwingPropertyChangeSupport.firePropertyChange(Unknown Source)
at javax.swing.JComponent.firePropertyChange(Unknown Source)
at oracle.bali.ewt.dTree.DTree.firePropertyChange(Unknown Source)
at oracle.bali.ewt.dTree.DTree$SelectionListener.propertyChange(Unknown Source)
at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
at oracle.bali.ewt.dTree.DTreeMultipleSelectionManager.firePropertyChange(Unknown Source)
at oracle.bali.ewt.dTree.DTreeMultipleSelectionManager._setSelection(Unknown Source)
at oracle.bali.ewt.dTree.DTreeMultipleSelectionManager.selectItem(Unknown Source)
at oracle.bali.ewt.dTree.DTree._updateSelection(Unknown Source)
at oracle.bali.ewt.dTree.DTree._handleMouseSelection(Unknown Source)
at oracle.bali.ewt.dTree.DTree.processMouseEvent(Unknown Source)
at oracle.olap.awm.navigator.Navigator.processMouseEvent(Navigator.java:509)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at oracle.bali.ewt.LWComponent.processEventImpl(Unknown Source)
at oracle.bali.ewt.dTree.DTree.processEventImpl(Unknown Source)
at oracle.bali.ewt.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NullPointerException
at oracle.AWXML.AW.readAWDefinitions(AW.java:1315)
... 41 more

Did you also check more than one user account to eliminate possible user-specific problems? Do NOT use the "Guest" account for this test. If you do not have more than one user account for the testing, create a new one now. If you need help, here's how to do it in your Mac OS:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
• Then, if you have not already done so, restart Mac and
    try again. If the iSight still does not work, continue.
• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, (are you certain that you
   used the correct "reset" procedure?), yours is most likely a
   hardware problem that will require a professional fix.
   Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
• If you want to try one more thing on your own first,
use Disk Utility to repair permissions. Then
download and apply the latest Combo Update for
your OS. Currently, the latest SL Combo is here:
    http://support.apple.com/kb/DL1399
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight. Have your Mac professionally serviced.
The only other user action I could sugget is to completely reinstall your Mac OS. If none of these suggestions resolve your trouble, I think you will need an Apple-Authorized Service Provider to fix your cam.
Message was edited by: EZ Jim

Problems with Sequential Model in Run-Time. OI Crashes.

I would like to ask for help for the following Problem:
I am trying to run an Operator Interface which I created based on the TS Simple OI.
TestStand 3.1f1
LabVIEW 7.1.1
The sequence I am running is using a few file Globals for data exchange between the steps and calling the main sequence in another sequence file, based on the UUT barcode. The barcode resolves the sequence file name, where the appropriate UUT test sequence is. Most of the Steps are Express VIs.
Basically: The main sequence file executes, its defines the UUT to be tested, calls the MainSequence in the appropriate sequence file which after the tests returns. The main sequence file than ends the test, a report is generated.
Everything runs perfect in the TestStand Development Environment (Sequence Editor), no problem at all. But with the Operator Interface I am having great problems.
It is very strange, but after the second Single Pass (I am always using this entry point with the sequential Model) the Operator Interface crashes: *always*, on the 3rd (!) run I get the following Error:
Run-Time Error
Details: No details available
Error Code:-17502; System Level Exception.
Location: Step 'Send Model State Message: 'Initializing'' of sequence 'Single Pass' in 'SequentialModel.Seq'
Step Description: Call Thread.PostUIMessageEx
Step Status: Error
This is a Error originated from the Sequential Model sequence. After this I get different behaviors, sometimes memory access crashes, sometimes LabVIEW.exe Aplication must be shut down, the OI won't work again.
The same Problem hapens if I use the standard TestStand Simple OI or the Full-Featured OI !!! But only if I start these OIs via LabVIEW. If I start the OIs via executable (.exe provided) than everything runs like in the Sequence Editor, that is, without errors! Do they use different LV Run-Times? How can this happen?
With the sequence editor (LV Adapter configured to work with LV Dev. System - active Version 7.1) the sequence runs perfectly! With an OI the sequence crashes after the 3rd. run! Why?
The Whole NI directory (with TS and LV) was masscompliled (LabVIEW 7.1.1).
Now I need some help, it is really important for my work to get this OI working! I am looking forward for any replies!
Thanks a lot!
Regards,
- Caribe -

Hi Caribe,
At the moment I am un-able to reproduce your problem. I am using LabVIEW 7.1 and a TestStand beta, I have also used TestStand 3.0 and I am using the standard LabVIEW OI, run as exe and also the top level VI.
I shall try to get the update for LV7.1 and try again.
Regards
Ray Farmer
Message Edited by Support on 09-26-2005 03:06 PM
Regards
Ray Farmer

India reliance roaming broadband+ usb problem with macbookpro 15"

hi!
am using the new reliance huawei usb roaming internet access with my macbookpro 15". it works at upto 3.1mbps in HSD mode, and at much-lower speeds at cdma x1, where HSD is not available.
i bought this in march 2009, and it worked in HSD mode under mac osx10.5.6 in both delhi, and in patiala, which is covered in the HSD range.
however, i recently upgraded to 10.5.7. when i stepped out on roaming, where HSD is not available, it should fall down to CDMA. it doesn't work, issuing the 'carrier not detected' error. i've tried reliance tech-support, searched the web, but have found no answer why.
i successfully managed to configure another cdma 1x device, the ZTE to work with the same service-provider, and it worked. however, the moment i tried my usb device, it wouldn't work. it did work on my return to my home city.
is anyone else using this service on their macbookpro 15"? have you faced this problem? do you know a workaround? appreciate your response.
thanks
niyam

the problem was with Reliance. Some rather persistent and at-times frustrating follow-up sorted out the hassle finally.

Problems with database modelling and primary keys

Hi,
I use JDeveloper exclusively for data modelling and generating the sql to build my db.
Its good but i have found a bug that can be rather annoying:
If i change the primary key of a table, the change does not seem to register within the model. So when i try and create a foreign key relationship to another table, the type is of the old type (say i went from varchar2 to number).
The only way around this is to delete the table and create it again. This also causes problems because the db generation wizard will then refuse to open properly (because it does not know that a table has been deleted).
Is this a known issue?
Cheers
Rakesh

Is this forum meant for reporting bugs or not? This issue i have stated is repeatable and in the current version.
R

Wake up problems with MacbookPro (Model 6,2)

Similar Messages

Maybe you are looking for