Walk around for CFGRID

I found just a little walk aroud in CFGRID/HEREF tag for
solve two problems: remove the underline of the text in the grid
and format the output with cf function , put inside the cell a html
tag or put that You want.
The idea is simple, in the CFC create a new query object with
the data from the main query and your process string .

Similar Messages

Is it okay to walk around with "MacBook"

we just got wireless internet and my mom just walked back to my room and showed me a video on "you" "tube" & i was wondering if it hurts the laptop to be carried while its in use?
and can i get some more tips on taking care of our new "macbook"
thanks =)

Its NOT a good idea to walk around with you Apple MB running IF you're walking down the halls of the Microsoft Campus. Hey, its not safe to drink coffee while using your MB also IF you are going to turn the cup upside down while it's over the keyboard.
Otherwise, its a question of how safe you want to be. I've been walking around my home with every laptop I've ever owned without ANY problems. The only thing you have to be aware of is that you're getting "out on the edge" if you were to trip and end up toss the MB at the same time. ANYTIME I carry my MB and especially while it's running, I'm especially careful about where I'm stepping and other surrounding that might make me drop it if I were to bump into them.
Life's too short to never take a teeny step out on the edge.
Another thing to consider. Most laptops are built pretty sturdy. A few years ago I had an IBM Thinkpad that was a pretty good notebook, but like all of them, it came time to get a better one. So I advertised in on Craigslist, made a contact to sell and while I was waiting for the buyer to come over to pick it up, it fell off my kitchen counter and bounced on the hardwood floor. I figured it was toast, but I went ahead and turned it on and it booted right up. Not a ding one on it. I sold the computer with a 2 week guarantee and never heard from my buyer again so I assume there no damage that I didn't notice.
So, live a little and carry it around when you want to share something with your family or friends and I doubt you'll ever have a problem.
As far as the Apple warning about moving while the computer is on, that's their lawyer talk. Same as the warning about not using a hairdryer in the bathtub.

Hairline Crack appeared on Z1 from walking around!

Hi, does anyone know if there is some fault with the Z1. I have a hairline crack that has appeared from walking around, sitting or something. It has not been dropped, or misused or anything like that. I'm having to pay for it to be repaired but I'm wondering if this is a fault on the handset due to it's nature of style.
It's certainly put me off buying sony products again as I feel that having a phone in your pocket and the screen crackinging, is not accidental damage, but a fault on the handset (I'm sure others will disagree).
Anyway, is this a common problem?
Alan

Check this.If you search this forum,you will find your answers.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Work around for Application.cfc

I have an Application.cfc file that outputs a header and footer page for every request. That works wonderful but if I try to open a page that is doing a <cfgrid> using a CFC file than I get an error of "Error invoking CFC /GATS/CFC/purchaseOrder.cfc : Internal Server Error [Enable debugging by adding 'cfdebug' to your URL parameters to see more information]" when opening the page.
Commenting out the header/footer include in the Application.cfc file lets the <cfgrid> populate with the CFC file. Is there a fix or work around for this?
Application.cfc file
<cfcomponent output="false">
<cffunction name="onRequestStart" returnType="boolean" output="true">
      <cfargument name="thePage" type="string" required="yes">
     <cfset PageName = GetFileFromPath(thePage)>
    <cfif not IsDefined("session.user.isAuthenticated") or
          session.user.isAuthenticated equal session.no>
      <cfif FindNoCase('index.cfm', PageName) is not 0>
        <cfelse>
          <cfset session.messages[1] = "Authentication required.">
          <cflocation url="#application.WebAddress#" addtoken="no">
      </cfif>
    </cfif>
    <cfif FindNoCase('index.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "">
      <cfset request.Screen = "Login">
    </cfif>
    <cfif FindNoCase('mainMenu.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "Home">
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('purchaseOrder.cfm', PageName) is not 0>
      <cfset request.PageNavigation = '<a href="mainMenu.cfm">Home</a> &##8226; New Purchase Order'>
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/header.cfm">
    </cfif>
    <cfreturn true>
</cffunction>
<cffunction name="onRequestEnd" returnType="void" output="true">
      <cfargument name="thePage" type="string" required="yes">
    <cfset PageName = GetFileFromPath(thePage)>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/footer.cfm">
    </cfif>
</cffunction>
</cfcomponent>
purchaseOrder.cfm
<cfgrid name="AccountGrid" format="html" bind="cfc:GATS.CFC.purchaseOrder.GetQuantities({cfgridpage},{cfgridpagesize}, {cfgridsortcolumn}, {cfgridsortdirection})">
<cfgridcolumn name="ID" header="ID" display="yes">
<cfgridcolumn name="vendor_name" header="Name" display="yes">
</cfgrid>
I found this on the web:
That error is due to our application.cfm having a single HTML comment at the
start of the file. Apparently if your Application.cfm or Application.cfc file
outputs ANYTHING, binds to CFCs with AJAX (via HTML CFGRID or CFAJAXPROXY, for
example) do not work. The CFC will be called, but the data from it will never
"flow" into the CFGRID. Removing the comment from the Application.cfm file took
care of our CFGRID issue.
This there a way to have an Application.cfc file that displays a header and footer for every page and have and
have a page have a <cfgrid> in it?

BKBK,
I created the examples you posted and commenting out the header/footer lines in my Application.cfc displayed the cfgrid results (updating the query to a table I had). Running the same example code with the header/footer included in the Application.cfc would not show the cfgrid results.
I attached the Application.cfc file for review.
Couldn't attach the file.
Application.cfc
<cfcomponent output="yes">
<cfset this.name = "GATS">
<cfset this.clientmanagement = "true">
<cfset this.applicationtimeout = CreateTimeSpan("0","0","20","0")>
<cfset this.sessionmanagement = "true">
<cfset this.sessiontimeout = CreateTimeSpan("0","0","20","0")>
<cfset this.scriptProtect = "true">
<cfparam name="session.yes" default="Yes">
<cfparam name="session.no" default="No">
<cffunction name="onApplicationStart" returnType="boolean" output="no">
    <cfset application.Directory = "/GATS/">
    <cfset application.Datasource = "IA-webapplications">
    <cfset application.DatasourceGATS = "SBS-GATS">
    <cfreturn true>
</cffunction>
<cffunction name="onApplicationEnd" returntype="void" output="no">
    <cfargument name="ApplicationScope" required="yes" />
</cffunction>
<cffunction name="onSessionStart" returntype="void" output="no">
    <cflock scope="session" timeout="5" type="exclusive">
      <cfset session.no = "No">
      <cfset session.yes = "Yes">
      <cfset session.new = "New">
      <cfset session.user = StructNew()>
      <cfset session.user.isAuthenticated = session.no>
      <cfset session.user.emplid = "">
      <cfset session.user.userSSOId = "">
      <cfset session.user.firstName = "">
      <cfset session.user.lastName = "">
      <cfset session.user.name = "">
      <cfset session.messages = ArrayNew(1)>
      <cfset session.savedInputValues = ArrayNew(1)>
      <cfset session.filesTransferred = "">
    </cflock>
</cffunction>
<cffunction name="onSessionEnd" returntype="void" output="no">
    <cfargument name="SessionScope" required="yes">
    <cflock scope="session" timeout="5" type="exclusive">
      <cfset Arguments.SessionScope.user.isAuthenticated = session.no>
      <cfset Arguments.SessionScope.users.emplid = "">
      <cfset Arguments.SessionScope.user.userSSOId = "">
      <cfset Arguments.SessionScope.user.firstName = "">
      <cfset Arguments.SessionScope.user.lastName = "">
      <cfset Arguments.SessionScope.user.name = "">
    </cflock>
</cffunction>
<cffunction name="onRequestStart" returntype="void" output="yes">
    <cfargument type="String" name="TargetPage" required="yes">
    <cfset PageName = GetFileFromPath(TargetPage)>
    <cfif not IsDefined("session.user.isAuthenticated") or
          session.user.isAuthenticated equal session.no>
      <cfif FindNoCase('index.cfm', PageName) is not 0>
        <cfelse>
          <cfset session.messages[1] = "Authentication required.">
          <cflocation url="#application.WebAddress#" addtoken="no">
      </cfif>
    </cfif>
    <cfif FindNoCase('index.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "">
      <cfset request.Screen = "Login">
    </cfif>
    <cfif FindNoCase('mainMenu.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "Home">
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('purchaseOrder.cfm', PageName) is not 0>
      <cfset request.PageNavigation = '<a href="mainMenu.cfm">Home</a> &##8226; New Purchase Order'>
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/header.cfm">
    </cfif>
</cffunction>
<cffunction name="onRequestEnd" returntype="void" output="yes">
    <cfargument type="String" name="TargetPage" required="yes">
    <cfset PageName = GetFileFromPath(TargetPage)>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/footer.cfm">
    </cfif>
    <cfif FindNoCase('sessionTerminated.cfm', PageName) is not 0>
      <cfinvoke method="onSessionEnd">
        <cfinvokeargument name="SessionScope" value="#session#">
      </cfinvoke>
    </cfif>
</cffunction>
<cffunction name="onError" returnType="void" output="no">
    <cfargument name="exception" required="true">
    <cfargument name="eventName" type="string" required="true">
    <cfthrow object="#arguments.exception#">
</cffunction>
</cfcomponent>

Iphone4 switches off everytime walk around with it in pocket

Iphone4 switches it self off everytime I walk around with it in my pocket, and it's very difficult to switch back on again. Is this a common issue or a manufacturing error, I've taken it to my service provider already and they can't find the fault with it. Please help don't know what I should do. Also have loaded the latest software.

As Alan said, an iPhone cannot self-power off unless the battery dies or there's a fault.
Try fully discharging and then fully recharging your battery to recalibrate the battery meter.
Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Try restoring as new, i.e. without your backup.
If none of those work, return it to wherever you bought it for diagnosis and possible replacement.

Game: character walks around and stops walking when hits a hole

Hi
I have a game where the character walks around the screen and stops if she hits a wall or a hole etc... - typical. HOWEVER - I coudn't get her to stop walking. Is there any standard code for this. If you tell to stop walking then she can't walk back out either etc... Also, she walked into the hole a little so being in the hole she definately couldn't walk any more not even back out as she would be walking inside the prohibited zone.

typically the character movieclip would play (to display walking animation) and the background or character would move (to convey the character's movement within the game).
stopping the character's animation requires only a stop() applied to the character movieclip and stopping the character from moving requires some other movieclip be stopped or some tween stopped or some code adjusted.

Is there a work around for my Akai Pro EIE Pro interface to work with mountain lion

Does anyone have a work around for the Akai EIE Pro Audio interface that just stopped working after the mountain lion upgrade. Akai has no response currently.

Yep,
They say they're working on it.
It ***** though
effo

Got error message with web based application that it would only work on MS Explorer 6.0 or newer. Any work around for this?

When accessing a web based program I got a message that it could only be accessed using MS Explorer 6.0 or newer. Is there a work around for this?

There is a way to do this.
But it works or not, I have no idea.
Enable "Develop menu".
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click the Develop menu and select "User Agent"
There are choices. Do not forget to make Safari default again afterwards.

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Work around for shared calendars

Has anyone found a work around for shared calendars yet? This has to be one of the biggest downfalls of the iPhone, along with the fact it can't search in the mail app.
If anyone ahs found a work around I'd be very keen to here it.

I have not used this product but it sounds like it may be able to do what you want.
http://www.busymac.com/index.html

Work around for radio tuner service not working

A work around for the lack of radio tuner service that has appearently hit Itunes versions lower than 11.
We all hope that Apple will restore Radio Tuner Service for us legacy products users soon, but I've been thrown under the bus more than once by Apple in the last 25 yrs to put much hope in that (I started with an Apple III w/a Z80 card running C/PM, yeah I'm that old)
Have your iTunes and your favorite browser open.
In your browser go to http://vtuner.com/setupapp/guide/asp/BrowseStations/startpage.asp
This will give you a list of Genre's, etc of streaming internet stations.
When you select a genre you'll get a list of stations that shows station ID, what type of feed codec and data rate.
Select any of the AAC or MP3 feeds.
Select play.
This will send a small download file to your computer containing the selected feeds URL.
Your computer will ask what app to use to open the file, select iTunes.
This will automatically open a file called Internet Songs at the end of Playlists in iTunes (if you don't already have one), and will install the URL there.
All the stations you selected will now be permanently stored in Internet Songs.
Viola, your very own custom personal internet radio playlist!
GT
Dual Core 2Ghz G5, 9.22/10.4.11/10.5.8

Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
"Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
I hope this helps.
PS, I forgot how clunky Tiger is compared to Leopard...

Work Around For Numbers Crashing

Work Around For Numbers Users:
For those of us who have numbers and have had problems with it crashing when scrolling across sheets that have checkboxes try this: Double select a cell, and use the expanding group to navigate the sheet. It seems to be stable when doing this.
3 weeks after the os8 release and still no fix for this? Pathetic.

If anyone has been having trouble with upgrading the domain file and iWeb crashes, here is the fix that worked for me:
http://discussions.apple.com/message.jspa?messageID=5100025#5100025
*MAKE SURE YOU BACKUP YOUR DOMAIN FILES FIRST!*

Work around for User ID 32 character limitation in CCX Agent?

Are there any kind of creative work arounds for getting past the ridiculous 32 character limit when logging into the CCX Agent?
We are moving toward using the User Principal Name (UPN) in CUCM LDAP which means that the domain is now tacked onto the end of their existing User IDs. We are doing this so that users from multiple domains can authenticate to various Cisco tools and apps. It works very well, except when firing up the Agent!
I've already been playing around with UPN suffixes, and while I can get them to show up in CUCM (and subsequently), I can't seem to get them to authenticate.
I shouldn't even have to get this creative, just remove the 32 character limit, Cisco!
We are running CCX 8.5 and CUCM 8.6

Hi ,
I am not aware about any such workarounds.
After referring to the below guide,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf
On page 78, it is mentioned as,
Caution : When logging into Cisco Agent Desktop, agents use the Unified CM user ID and password. While the Unified CM limits agent IDs to 128 alphanumeric characters, the Unified CCX limits agent IDs to 31 alphanumeric characters. Be sure to abide by the 31 character-limit when configuring agents in Unified CM.
I am sure even if it works by some workarounds also, you may see some issues specially from the CAD\CSD\CDA side, which Cisco will not support it quoting the same above reason.
Hope it helps,
Anand
Please Rate helpful posts !!

Work around for 60 column limitation

All,
Does anyone know of a work around for the 60 column table limitation?
Will this be changed in a future release?
Thank you.

I also need a workaround for this. I have users that want to download data as excel files, and the built in export to csv was working great until the dynamic sql statement pushed itself to more then 60 columns. Is there some other way to provide a link to the data as csv? Can I hook into the csv functionality of HTML DB? Can I create a page template that modifies the Content-Disposition and/or Content-Type so the browser thinks the page is csv/excel so that I could dump out a clob of data I put together? Should I just have a button that provides a link to something outside HTML DB to query and dump data from the database?
As it is, the users really don't need to see the data on the screen. I just need a way to dump 60+ columns of data to the user as csv.

Work around for Excel's array formulae?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?
I attach an image shot of my Excel spreadsheet which may help:

Hi Rich,
Some made-up dates.
If you have multiple x's in a column, change all but the most recent to "Done" or something other than x This approach looks for the date in Column A that matches a single x in a task column.
This example works on years. I hope you change your oil and filter more often .
One Header Row and four Footer Rows. Enter Years between services (D9) from the keyboard.
To find the date of the last service (the only x in Column D)
D10 contains this formula:
=INDEX($A,MATCH("x",D,0))
You can Fill Right to other columns.
"Years since" (D11) contains this formula:
=YEAR(TODAY())-YEAR(D10)
"Alert" (D12) contains this formula:
=IF(D11>D9,"Hey, You!", "OK")
Conditional Formatting in D12 sets the text to red if it equals "Hey, You!"
It would be best to combine these steps into one complex formula. Numbers is slowed down with each Header or Footer in a Table.
Regards,
Ian.

Walk around for CFGRID

Similar Messages

Maybe you are looking for