Walkman beat light effect not working when throw is activated

When I connect my phone to a bluetooth receiver and play music via walkman the light effects aren't working, only when I pause or change the track. It doesn't really disturb me but I'd like to know if there is a possibility of changing it or if it is what it is. Thanks

having same problem ...
i throw it to sbh 50 . light effect is not turn on ..

Similar Messages

Lighting Effect not work in CS6*

Why Filter/ Render/ Lighting Effect not work in CS6?
It's not work only in CS6 Beta or in anything else :-/. It's Useful with me

A bit more information would be helpful. What is happening on your system when you go to lighting effects?
What system are you running on? What video card are you using? Are you using the most recent driver?
Do check our system FAQ as GPU is requried for lignting effects to work properly.
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Pattie

Fault policy does not work when throwing remoteFault in bpel

Hi
I have a BPEL-proces in which I throw a remoteFault.
In the fault-policy there is a condition for this fault
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-java"/>
</condition>
</faultName>
But the fault-policy does not work if I throw this remoteFault in de bpel. But when I invoke another service (which is shutdown), then I get a remoteFault and for this remoteFault the fault-policy works well.
Any idea why the fault-policy does not work when I throw the remoteFault?
Regards

BPEL fault works only on invocation failures.
Fault management will work based on the remote fault from the remote service, you cannot throw remote fault from bpel and capture that in fault management and process.
The following are the actions that we can take on faults.
1. Human Intervention
2. Rethrow [rethrowFault]
3. Termination [abort]
4. Replay Fault [replayScope]
5. Custom Java Action [javaAction]
6. Retry [retry]
Hope this helps !!!
Thanks,
Vijay

Lighting effect not working for photoshop CC 2014

hello there i can not seem to get the lighting effects working in Photoshop cc 2014 i updated it and also made sure my graphic driver was updated and also made sure that it was strong enough to run it and it is so now i'm just confused why its not working.
not sure what to do from here need to get some textures done and this does not help and couldn't find anwsers on the adobe contact us tab so came here.

I could repro this. Fix it by restarting Photoshop.
What happens is that when you toggled your graphics acceleration on without restarting Photoshop, it made Photoshop go coo-coo for Cocoa Puffs. (It happens.) Hopefully, someone from Adobe's staff will see this.

Lighting effects not working, 'Could not apply the workspace because there is not enough memory (RAM)' with 4GB RAM?

Tried to use 'render/lighting effects' on 5 more or less new different laptops now. All kind of Window versions.
They all have at least 4GB RAM. The Graphic Card is compatible.
Layer to work on is RGB-Type.
It's all about Photoshop CC 2014, trial version.
When I go to 'Lighting effects' it says first:
'The 3D features require that 'Use Graphics Processor' is enabled in the Performance preferences. Your video card must meet the minimum requirements and you may need to check that your driver is working correctly.'
- I switched the 'Use Graphics Processor' on and off and restarted new - nothing happens.
- Video card is compatible.
Second it says:
''Could not apply the workspace because there is not enough memory (RAM)'
- RAM on all the computers I tested it with is at least 4GB
Please help!

We would need to know the amount of Video ram you have. If it is above 512 MB, then check for driver updates.
Windows OS
Click Start.
On the Start menu, click Run.
In the Open box, type "dxdiag" (without the quotation marks), and then click OK.
The DirectX Diagnostic Tool opens. Click the Display tab.
On the Display tab, information about your graphics card is shown in the Device section. You can see the name of your card, as well as how much video memory it has.
Once you know the kind of graphics card you have, visit the manufacturer's website to download the latest driver. Here are links for downloading drivers from the most common graphics card manufacturers:
NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp
AMD: http://support.amd.com/en-us/download
Intel: http://support.intel.com/support/graphics/

Render lighting effects not working properly

I seem to be having a problem with the 'Render > Lighting Effects' feature. It works, but not the first time I use it. I can go in, set the controls how I'd like them, and click OK to apply. The effects will remain for about 5 to 10 seconds, and then it will revert to the image I had before the lighting effects were applied. If I repeat the process a second time, the effects will remain in place.
I'm using CS6 via Adobe Creative Suite on a Windows 7 operating system. Any ideas?

Don't really understand what you are saying.
Without the ability to change the size of the oval the lighting effect will always be the same size. How can I get the buttons to appear? I have just watched several video tutorial on the lighting effects in CS6 and the buttons were showing in all of these and it was demonstrated how to change the size of the effect by using them.

Lighting Effect Not Working Correctly?

I recently purchased and downloaded the Adobe Photoshop Elements 10. When I try to apply the lighting effect to my photos, it doesn't give me any options like the elements 6 did, and I was wondering how to fix this.

If your using the effects panel instead of the filter menu, then in order for filter dialogs to show, you need to check Automatically Show Filter Gallery

Lighting Effects -- Not Working

I am having trouble with the Lighting Effects in Photoshop CS6. I can get a lighting effectt, but in the preview window, I cannot move the light (although I can select it), and there are no control options.
I am running CS6 on Windows 7 64-bit
I have looked through the discussion site and done everything suggested -- Adobe is up-to-date, as is my graphics card; I have changed the "Drawing Mode" from Basic to Normal to Advanced. (I do note that since I updated the Video Driver, the OpenCL option is now greyed-out. I'm not sure why.) I have copies of the relevant System Info below. Any suggestions?
Thanks in advance for any help.
Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 2
Processor speed: 2793 MHz
Built-in memory: 6109 MB
Free memory: 2890 MB
Memory available to Photoshop: 5336 MB
Memory used by Photoshop: 70 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 230M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 945, right: 1680
Video Card Number: 2
Video Card: Windows Live Display Driver
OpenCL Unavailable
Driver Version: 15.5527.0.0
Driver Date: 20100806000000.000000-000
Video Card Driver:
Video Mode:
Video Card Caption: Windows Live Display Driver
Video Card Memory: 1024 MB
Video Rect Texture Size: 8192
Video Card Number: 1
Video Card: NVIDIA GeForce GT 230M
OpenCL Unavailable
Driver Version: 9.18.13.2723
Driver Date: 20130912000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1680 x 945 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GT 230M
Video Card Memory: 1024 MB
Video Rect Texture Size: 8192

Hello, I'm wondering about the driver of the other video card, and if there is a way to turn it off in te bios.

HELP! Tilelist effects not working when dataprovider is filtered

Hi All,
I have a tile list displaying thumbnail images which is bound
to an
array collection. I have a nice little DefaultTileListEffect
on the
tile list to fade things in and out when changes are made to
the array
collection.
I notice that when I filter the array collection using its
filterFunction that the effect does not run on items that get
filtered
out or in... any ideas on how to get this to work? It would
be quite
nice to have the images fade out as they no longer meet the
filter
requirements and fade back in when they do.
Cheers,
Brendon

I'm seeing similar behavior here. Upgraded Premiere CC 2014 to the latest version. Opened my project and continued working. A couple of clips (seemingly for no reason) cannot be moved around in the Program monitor and the Effects Panel appears blank. If I click on another clip I see its effects but when I click back to the problem clip it is blank (or retains the effects info from the working clip). There seems to be no rhyme or reason as to why this particular clip is causing a problem. Screenshot:
Any thoughts? Thanks!
Vaughn

Certificate Authority not working when signing documents (Active Directory)

We recently went to an Active Directory structure at my job, and we do a lot of signatures. Part of the Active Directory setup was an auto-certificate authority setup. I went to sign a document recently and the signature will not apply. I went into trust tab and clicked to trust the certificate, and then backed out, but it still will not sign. When I click to sign the document nothing happens. There are red Xs next to everything in the trust tab.
Any ideas? I am wondering if there is something I can do in Adobe to let it know that certificate is trusted?
Any help would be appreciated.

When Acrobat builds the signature object (which is created when you sign), it tries to populate the object with as much data as possible in order to facilitate long term validation. This means that it is trying to add all of the certificates in the signature chain to the PDF along with all of the corresponding revocation information (which is either an OCSP response of a CRL). This way, after the signer's digital ID expires all of the validation collateral will still be available, otherwise you would get an Unknown signature after the signer's cert expired.
In order for Acrobat to get the revocation information trust has to be established. When you create the signature Acrobat tries to gather all of the certificates in the signing chain. After it has finished building the chain it walks the chain from the bottom up (the bottom being the signer's certificate) and checks to see if the cert is a designated trust anchor. Once it finds trust anchor it will try to procure revocation info for each cert below the trust anchor, but not the trust anchor itself. After it has gathered up all of the rev info it writes it into the PDF file along with the certificates. So, when it comes to signature creation, it's good to add the certificate that is at the root (top) of the signing chain to the Manage Trusted Identities list and trust it for signing and certifying. That way when you do sign all of the rev info will be written into the file.
The next thing to realize is Acrobat can only retrieve the revocation info if it knows where to get it from. Each certificate in the signing chain except for the root cert should have an extension that tells Acrobat where it can download the information. For an OCSP response the URI is in the Authority Information Access (AIA) extension and for a CRL the URI is in the CRL Distribution Point (CRLdP) extension. If there is an entry in either of these two extensions that are not valid (that is either they don't exist or, the exist but don't really provide the expected data) then Acrobat will try to download the data, but the download will fail. Thus, you end up with a signature in an Unknown state because revocation checking must succeed if the is an AIA or CRLdP extension. Wheat you need to check is, does the certificate have one or both of these two extensions and if so, does it lead to a successful download.
Steve

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

PhotoShop CS6 - Lighting Effects Not showing

I know the question sounds like the ones you get all the time but in PhotoShop cs6 I can access the filter>render>lighting effects but when I click the lighting effect tab nothing shows and when I watch a tutorial and people open filter>render>lighting effects a adjustable thing appears on the layer which they can edit but I can not do this. Any help?

I had exactly the same problem and here is the answer: update the driver for your video card. And when you update, go to the vendor website! (i.e. the vendor of the particular video card you have). If you don't know what kind of video card you have, use the commands: Control Panel/System/Device Manager, then double-click on "Display Adapter". It will display a tab called "Driver", which will give you the date of your current driver. If it is anything older than maybe a year, go to the vendor site and download the appropriate driver. My download was about 260MB in size. It also seemed to improve my screen resolution a little at the same time.
But there is more! Photoshop CC uses two things called OpenGl and OpenCL. I have no idea what they are, BUT, I think both of them must be selected in order for Lighting Effects to work on Photoshop CC. And where do you select these things? Edit/Preferences/Performance
And finally, check the box "Use Graphics Processor", then click on "Advanced Settings". Under Advanced Settings you will see
And you guessed it! Click on the box "Use OpenCL". I have no idea if the 30 bit display box should be checked - I was trying everything at one point.
Anyway, it seems like Adobe has adopted new technology somewhere along the way, such technology not being included in video drivers just a few years old. Personally, I think Adobe should have made more of an effort to highlight this problem and provide an easier-to-figure-out solution.
Hope this helps!
Frank

Lighting effects not showing up in CS5

This plug-in is not showing up on both CS5 and CS 5.1 running on a MAC OSX 10.6.7 Italian system. I have tried both from the Italian versions of PS and even from one new version in English of PS5.1 and it isn't to be found under the menu "rendering" or enywhere else. I see that it is in the plug.in folder and the folder of lighting effects is there as well, but it just doesn't show up. Any ideas about this bug? I've tried it on 3 different computers!

As far as i know, the lighting effects filter only works in the 32 bit version of
photoshop cs5/5.1 on a mac system.
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7959a.h tml
There is also a photoshop macintosh forum (you posted in the photoshop elements forum)
http://forums.adobe.com/community/photoshop/photoshop_macintosh
Added: If you have the extended version of cs5, you might experiment using 3d lights
for lighting effects, which works in the 64 bit version of cs5. Turn your layer into a
3d postcard and use the 3d lights for various lighting effects.
MTSTUNER
Message was edited by: MTSTUNER

I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS

Any idea why is Bridge latest version not working when trying to open it in Photoshop CC 2014 ? (French version) ? When trying, Creative Cloud app will open to ask if I want to download newest version, which I did numerous times now.
Thank you
Guy Deschenes
Shawinigan (QC) Canada

Hi Eric,
Here's how a similar problem was resolved between PS and BR.
The issue was confirmed by ChunXiaYang at Adobe staff and solution put in the forum discussion on June 19 (no. 13). Here's a copy:
I have confirmed that this is a known issue before release. And the workaround is to uninstall and reinstall PS 2014. Then Bridge can be launched by selecting 'Browse in Bridge' in PS2014.
Please try the installation, and let me know whether it works. Thanks!
It woks just fine since I unistalled and reinstalled PS 2014.
Guy
Le 2014-07-17 à 1:13 PM, ericboerner a écrit :
I just installed Photoshop CC 2014, but Latest version of Bridge will not work when I want to open it from PS
created by ericboerner in Bridge General Discussion - View the full discussion
I did this with a fresh install of the entire CC package. As soon as the CC packages updated, CC Bridge broke. Unistalled CC PS, reinstalled again, CC Bridge works, but CC PS updates itself again, and breaks CC Bridge.
You know... The whole move to CC has been a massive cluster... I've struggled with the CC packages for my entire subscription year, and now I'm 1.5 month away from needing to throw down another $720 for no reason what-so-ever, just so we can Beta test your really screwed up subscription services.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6559164#6559164
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Clip name effect not working correctly in 2014/2014.1

I'm referring to these notes from the latest bug fixes here...
Bugs fixed in Premiere Pro 2014.1 Release | Premiere Pro work area
"Clip name effect doesn’t work correctly if Source Track is set to a different track."
"The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip."
I've just updated Premiere (2014.1) to specifically fix these two bugs. The Clip name effect isn't using the correct file names. It uses something close but not quite e.g. clip 100 shows as 100B which is down the timeline.
The effect is applied to a transparent layer (have also tried it in a black video layer) and the clip name drawn from a different video track (video/PNGs in track 1, transparent video and effect is in track 3). This problem only appears when videos are in the timeline. When used with stills (PNGs) it works fine.
Any idea of a fix or workaround that isn't using some kind of titling filter? I'm looking to automate the shot naming process for a pipeline in creating animation animatics and this would be perfect. If to actually worked properly.
Using Premiere on a Mac Book Pro with 10.9.5.

Anyone from Adobe care to offer some insight as it's something that is reportedly fixed?

Walkman beat light effect not working when throw is activated

Similar Messages

Maybe you are looking for