Walkman Color

I would like to see an option for changing the pink color of the walkman application, that would finish the total picture for me.
Perfect music player for the rest of it, love it!

Hi Katoeloos,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I have looked through the device to see if this would be an option, however this does not seem to be.
I am sorry for the inconvenience, and thank you for the feedback.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Background color in Walkman

i want to change color of bacground No Pink ... Why pink ? i want it black ... can i Set it or no ??? thnx ... pls i new updat Put there background chabge
sony xperia SP

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
At the time the Walkmman application doesn't support themes or chaning background color. The color of the application follows the Walkman icon design and I don't know if there will be any support for themes or adjusting colors on your own in the future.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Illumination bar when in walkman

When playing a song in walkman player illumination bar lights up in two different colors at the same time.(middle LED in one color and other two in another color) Is it normal? Is it a problem with the LED? I think it is supposed to light up in one color according to album cover. Earlier it lit up only in one color at a time.
Solved!
Go to Solution.

Yeah I thought so too. It happens only to some album covers only. For other songs it lights up in single color. But recently I updated this "sense me" thing in walkman. So I thought it has something to do with this because it also messed up some of my song titles. It made them Japanese. Now I can't even know what song i'm listening to.
But it's Ok like u said. Two is better than one . Thank you anyway.

Feedback on Walkman app

I have scoured the net for places to post Walkman app feedback and not found anything better than here, so here goes.
As of the most recent version of Walkman (8.0.A.0.4), here is my feedback:
THE GOOD:
* Walkman continues to be the best-looking music manager on Android and maybe even on any mobile device, period. Great design and aesthetics.
* The SenseMe playlists actually work pretty well!
THE BAD:
* MP3 "ALBUM_ARTIST" tag is ignored. To be fair, this is a long-known issue with Android mediastore and has been for years. Because Google is obviously not doing anything about it, perhaps Walkman could come out with its own music tag scanner, that does not use the Android mediastore for its tag info. As long as Walkman relies on Android's mediastore, tags are going to be dorked up.
In plain english, the reason this is an issue is that albums with multiple artists get split up into a number of separate artists (for example, in the tag "ALBUM_ARTIST" I put "Various Artists" and then for each track's "ARTIST" field, it lists the name of the artist for that track. Walkman - and virtually every other Android music player - ignores this ALBUM_ARTIST field, instead listing a whole bunch of artists with only 1 song listed for each. Obviously, iOS devices have long figured this out by accomodating not only the ALBUM_ARTIST field for MP3s but the "Compilation" tag as well.
* There should be a simple button to clear the play queue. Every major player except Walkman has this basic feature. Saying "just play a different album" is not really an answer.
* Enqueue album should append the album being enqueued to the end of the current play queue.
* Need to be able to multiple-select items in the play queue.
* Option to hide Artist background images (just use a color) when an artist is selected. I have a lot of independent artists in my player and Gracenote does a poor job at matching, often to humorous or annoying results.
If anyone can take this feedback and pass it on, or let me know who to send it to, it would be awesome! Thanks

Same here.
Please fix the Compilation Issue.
Thanks.

Please add track number information to Walkman app

Dear Sony software programmers,
If possible please add the track number information to your Walkman app. As shown in red color on the screenshots below.

Since there could be a spatial problem with playlists containing more than 99 songs (not enough space left to the artist name in the track list), this information would be shown only with playlists containing fewer than 99 songs.

Can I show a color bar instead of a color bullet in iCal Monthly view for all my events in all calendars?

In the Monthly view of iCal the only events that show a color bar in the event is the Birthday Calendar. All other events in all my other calendars only show a color bullet next to the event (unless I click on that event which then shows as a color bar). I would like to know if it is possible for all the calendar events to have a color bar in the monthly view instead of just that tiny color bullet.

Greetings Judith,
Before making any attempts at deleting calendar data, backup what you have just in case:
Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
iCal has an automated function located in iCal > Preferences > Advanced > Delete events "X" days after they have passed. By typing in a value for days you can tell iCal to delete all events before that time frame.
Example:
Today is 4-16-2012.
If I wanted to delete all events prior to 1 year ago (4-16-2011) I would type in "365" for the number of days.
Once you type in the number of days you want kept in iCal, close the preferences and then quit iCal.
Re-open iCal and check to see if the events are gone. If not you may want to leave it open for several minutes and then quit again.
Once the events are removed go back to iCal > Preferences > Advanced > Delete events "X" days after they have passed and make sure the check mark is removed to prevent future deletion.
Hope that helps.

Fax function of HP LaserJet Enterprise 500 Color MFP M575

Hi,
I am one of users of HP LaserJet Enterprise 500 Color MFP M575.
I would like to know can I set the printer do not print my fax number and fax header on paper when I fax my document to others.
I had login as admin but I did not see where I can config it.
Thank you.
Regards,
Jimmy Pun

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

HP LaserJet Enterprise 500 Color MFP M575 - Can't scan from Windows

We recently purchased and installed an HP LaserJet Enterprise 500 Color MFP M575 to be used as a networked all-in-one solution for a number of offices. I have been able to get it set up on our network and have installed the appropriate drivers on the requested Windows 7 x64 machines, and network printing works perfectly. However, it seems that despite the fancy scanning features available from the all-in-one itself (scan to email, scan to a network folder, etc.), I can't find any way to do an old-fashioned scan from Windows.
I have installed the full software solution available on the driver download page for the device, and while Windows lists the device as a "Multi Function Printer; Scanner" it does not recognize it as an actual scanner. The built-in Windows Fax and Scan simply reports that no scanners are installed. The software installation did not include the HP Solution Center (which I am used to seeing from my experience with various other HP all-in-one devices) or any equivalent for direct scanning. The driver download page for the device does not include any separate scanning drivers, so I can't be certain if they were included with the full installation or exist at all.Some of our staff also use Adobe Acrobat to scan, and even that fails to recognize the MFP as a scanner.
We'll eventually be setting up the device to scan directly to a network folder, but we need a fallback while IT takes their time getting it set up; I can't imagine that the simplest option is not available at all. I must be missing something here, any assistance would be greatly appreciated.
Edit: To add, I also ran the HP Print and Scan Doctor. Interestingly, it reports the device as a printer and only offers to "Fix Printing" without any sort of resolution for my scanning problem.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

How do I only allow certain users to print in color?

Product Name: HP Color LaserJet Professional CP5225dn Printer (CE712A)
Operating System Installed: Windows 7 Enterprise (64bit)
I work at a K-12 school and purchased the HP Color LaserJet Professional CP5225dn Printer (CE712A) for use in our computer lab. I would like to know if it is possible to have it so that only certain users can print in color (possibly put a password on it). I know the cost for color is higher, and therefore, would like it so that students have to approve through teacher if they want to print in color.
We are running it on our Print Server (networked) not through USB.
Thank you for the help.

Hi,
That's a very good question actually. In my corporate networks, we are talking about hundreds of laser printers and the ONLY thing we can do: only allow people access to a set of mono laser printers, not all printers. For example, the following printer is using B&W as default but can't stop users to print in colors if they could access to the resourse:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My Excel with PowerPivots acts weird, it hangs when i try to change font color

Hi
I am facing a weird issue using PowerPivot in my workbook, there is a worksheet named Charts in my workbook and all the charts i am using resides in that worksheet. Whenever i try to change the font color in that sheet, my excel's color palette goes blur
and then everything just freezes and turns black. This problem is happening only with Charts worksheet, when i try to change the color in other sheets, it works just, the problem is only with Charts sheet. File
size is 16 MB, there are just 10 pivot tables with some calculations and some calculated fields. There are no add-ins other than PowerPivot.
Thanks,
Shanker

Hi,
In regarding of the issue, please provide us more information to assist you better.
Do you receive any error message?
Which Excel version are you using? Excel 2013 or other?
Which workbook format are you using? XLS or XLSX?
Are you performing any specific task?
According to your description, this issue seems only occur with the special worksheet "Charts".
Firstly, I recommend we copy all of the content to a new/blank Excel file to test.
If it works fine, this issue might be caused by the "Charts" workbook itself. We'd better check the "Charts" workbook. Or re-build the file with a new workbook.
If it still makes Excel hang with a new file, this issue might due to the content. Please check the content first.
Secondly, we could follow below KB to troubleshoot this issue:
https://support2.microsoft.com/kb/2758592/en-us?wa=wsignin1.0
Thirdly, if the issue still exists, we may try to collect the Event log and App crash dump file to do advanced troubleshooting.
Event log:
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
App crash dump file:
First enable app crash dump collection by copying following words into notepad, saving it as dump.reg and importing
it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\EXCEL.EXE]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Then, open Excel
to repro the issue. If crash issue appeared, please find the crashdump file under c:\.
To further help you, please upload this file into Skydrive and shared the link here.
Also, you can try to analyze dump by yourself if you would like to：
How to analyze app crash dump file:
http://blogs.technet.com/b/askperf/archive/2007/05/29/basic-debugging-of-an-application-crash.aspx
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Messed up color display and resolution because of mini-DVI to video adapter

Once I connected the mini-DVI to video adapter to the tv and got weird colors on my screen for a while but then it worked out, then after a while I disconnected the cable and turned my computer off. After that, everytime I turned my macbook on, the color is fine for two seconds and then it turns into a weird offset color, really bright colors, kinda sketchy and just a few colors, and a weird resolution and display obviously, but then I just connect my Mini-DVI to video adapter and disconnect it again (quickly) and the color returns to normal. How can I make the normal colors stay and not have to connect the mini-DVI to video adapater everytime I want to see the normal color display and resolution??
please help!

Open the Universal Access pane of System Preferences, click on Seeing, turn off the White on Black, VoiceOver, and Zoom options, and drag the Contrast slider all the way to the left. If the issue persists, create a new folder on the desktop, drag half of the items from the Library/Preferences/ folder of the item in the Finder's sidebar with the house icon into it, and narrow down the files until you've isolated the one responsible.
(30807)

How to give Common Background color for all JPanels in My Swing application

Hi All,
I am developing a swing application using The Swing Application Framework(SAF)(JSR 296). I this application i have multiple JPanel's embedded in a JTabbedPane. In this way i have three JTabbedPane embedded in a JFrame.
Now is there any way to set a common background color for the all the JPanel's available in the application??
I have tried using UIManager.put("Panel.background",new Color.PINK);. But it did not work.
Also let me know if SAF has some inbuilt method or way to do this.
Your inputs are valuable.
Thanks in Advance,
Nishanth.C

It is not the fault of NetBeans' GUI builder, JPanels are opaque by default, I mean whether you use Netbeans or not.Thank you!
I stand corrected (which is short for +"I jumped red-eyed on my feet and rushed to create an SSCCE to demonstrate that JPanels are... mmm... oh well, they are opaque by default... ;-[]"+)
NetBeans's definitely innocent then, and indeed using it would be an advantage (ctrl-click all JPanels in a form and edit the common opaque property to false) over manually coding
To handle this it would be better idea to make a subclass of JPanel and override isOpaque() to return false. Then use this 'Trasparent Panel' for all the panels where ever transparency is required.I beg to differ. From a design standpoint, I'd find it terrible (in the pejorative sense of the word) to design a subclass to inconsistently override a getter whereas the standard API already exposes the property (both get and set) for what it's meant: specify whether the panel is opaque.
Leveraging this subclass would mean changing all lines where a would-be-transparent JPanel is currently instantiated, and instantiate the subclass instead.
If you're editing all such lines anyway, you might as well change the explicit new JPanel() for a call to a factory method createTransparentJPanel(); this latter could, at the programmer's discretion, implement transparency whichever way makes the programmer's life easier (subclass if he pleases, although that makes me shudder, or simply call thePanel.setOpaque(false) before returning the panel). That way the "transparency" code is centralized in a single easy to maintain location.
I had to read the code for that latter's UI classes to find out the keys to use (+Panel.background+, Label.foreground, etc.), as I happened to not find this info in an authoritative document - I see that you seem to know thoses keys, may I ask you where you got them from?
One of best utilities I got from this forum, written by camickr makes getting these keys and their values very easy. You can get it from his blog [(->link)|http://tips4java.wordpress.com/2008/10/09/uimanager-defaults/]
Definitely. I bit a pair of knucles off when discovered it monthes after cumbersomely traversing the BasicL&F code...
Still, it is a matter-of-fact approach (and this time I don't mean that to sound pejorative), that works if you can test the result for a given JDK version and L&F, but doesn't guarantee that these keys are there to stand - an observation, but not a specification.
Thanks TBM for highlighting this blog entry, that's the best keys list device I have found so far, but the questions still holds as to what specifies the keys.
Edited by: jduprez on Feb 15, 2010 10:07 AM

Problem with clipping and concerned objects (or rather their color)

Greeting everyone,
I hope i don't bother you with things that are already known or, in the end, are a product of my own stupidity ;P
My problem is the following:
I was working on a neat design for a list. The first version (without clipping) looked like this:
[http://www.7pics.info/?image=GHApp-Gradient-Mobile-HowItShouldBe_2c5.jpg]
As you can see on the bottom, the list was on top of all graphical elements.
And because this looks stupid, i decide to simply clip the list via "clip: Rectangle{...}".
Well... turns out it's not as easy as i hoped it would be; all of a sudden the list looks like this:
[http://www.7pics.info/?image=GHApp-GradientProblem-Mobile-1_fb7.jpg]
From the left to the right you see the following: first picture is what you'd see initially, from the second to the last i scrolled down one entry each (respectively moved the list up 30 pixels).
Further scrolling down doesn't change the look, it stays like in the last picture.
Scrolling up again delivers the same image, but in reverse order.
The clipping seems to change something in the style of the list elements.
To be more specific, the gradient of a single element is now applied to the whole list.
here is a Listing
//the group which contains the list and the clipping
Group{
     clip: Rectangle {
          x: 0, y: 70
          width: PublicVars.screenWidth, height: 210
          fill: Color.BLACK        //which color i use doesn't change the look
     content:[
          createChoicesList()
//create a box for each entry and add text from a string sequence "results"
createChoicesList():Node[]{
      for(result in results){
                       singleField = Group{
               Rectangle {
                    fill: LinearGradient {
                         startX : 0.0
                         startY : 0.0
                         endX : 0.250
                         endY : 0.250
                         stops: [
                              Stop {
                                   color : Color.LIGHTBLUE
                                   offset: 0.0
                              Stop {
                                   color : PublicVars.coolGradientBlueTransparent
                                   offset: 0.5
}I have no clue why this happens. I tried to shift some things around, thinking it had to do something with the order of some elements but... it didn't change anything.
Another thing i noticed afterwards:
If i run the App as a desktop program, the gradient effect is all messed up. but this time it doesn't matter if I clip the list or not:
[http://www.7pics.info/?image=GHApp-GradientProblem-Desktop-1_d5e.jpg]
The gradients are totally misplaced and if I scroll down they move and appear/disappear randomly across the list entries. sometimes the highlighted elements even look like this:
[http://www.7pics.info/?image=GHApp-GradientProblem-Desktop-2_89f.jpg]
Any Ideas?
P.s.:
Could it be that retrieving the resolution of a mobile device via
"var screenWidth = java.lang.Integer.parseInt(FX.getProperty("javafx.screen.width"));"
isn't very accurate?
If i use the values i get from this method for the desktop application, the screen will be smaller than in the emulated mobile phone
Edited by: Mr._Moe on 04.09.2009 21:31

Not sure about your problem, but I can answer your last question: you can now use the [javafx.stage.Screen|http://java.sun.com/javafx/1.2/docs/api/javafx.stage/javafx.stage.Screen.html] class to get screen dimensions.

Mini-DVI to Video shows w/o color and atleast 2 of everything

I just bought a mini-DVI to Video converter for my Macbook. I tried to hook it up to my 42" Panasonic Viera and had white static lines going up my screen with no picture. I then tried to hook it up with the composite and lowered the resolution all the way down and had picture but only in black and white and it divided my TV almost in half and put the images on my monitor up twice. How do I get the whole picture to take up the whole screen in color so I can watch my iTunes movies and DVDs on my TV.

From your posting, I can't tell what Viera model you have. However, I was just over to the Panasonic website and one 42" Viera advertised 4 HDMI inputs with 2 of them with separate audio inputs. If you have a similar model, you should go with the HDMI option. As per the posting above, you should be using the Apple mini DVI-->DVI cable. Couple that up with a DVI-->HDMI cable and you should be in business with the best video on your big screen. Works great on my 40" Sony.
Re your problem with double images in black and white, I had a similar problem in a different vain. My problem was a DVD player that I had hooked up to my TV with a s-video cable and it did the exact same thing. It was driving me nuts until I had the bright idea of reading the DVD manual. Sure enough, there was a setting in the DVD setup that had to be checked in order to view through a s-video output. Once I changed the setting, I only had one picture and the color reappeared. You probably had a similar setting in your Viera manual that would correct that problem.
Go with the HDMI option. Note that it will be necessary to run a separate cord for the audio.

Animated gif changes color palette while playing

Hi everyone,
I've been creating animted gifs using Matlab and the ImageMagick suite (convert). If I open the gifs in Preview, the color comes out fine in each frame; however i I use Quicktime (which is necessary, that's what we use for presentations) the color palette will change as the frames play.
I just got the newest version of Quicktime, hoping that it would solve the problem, but it didn't. Any ideas?

I'm not familiar to the software but I can guess what is happening.
Too many colors. A GIF is 8 bit (256 colors) but some of them are not used by all software. Windows and Mac's are different.
Does the software offer a way to reduce the number of colors used? Can you get it down to 8 bit? Can you discard unused colors with some other software?
Have you considered building an image sequence movie? These allow many different images formats and support up to 32 bit formats (millions of colors).
QuickTime Pro ($30) can import a series of images as a movie. The file size is much smaller than any video format used today (just the total of the images file size).

Walkman Color

Similar Messages

Maybe you are looking for