Walkman : how to play only local files and no network related media.

Hello All.
The Walkman app is a nice player.
But...how can i configure it that it only shows local files on my sdcard1 ?
I don't want to use network streaming, i just want to listen to my local stored (huge) collection flac files.
Is disabling 'music unlimited' all i need to do? (i use a €3,- for 3 months action from playstation4)
∆○×□ PSP1004 (Phat 1st gen.) 5.00 M33-6 (+1.50) + 32GB Pro-Duo.
∆○×□ PS4 1.7X + 500GB hdd + Dualshock4 + PS4 Camera,
Xperia-Z1 Android 4.4.X + 32GB microSD + Philips SHB9100
Solved!
Go to Solution.

Thanks for the fast reply.
Cool, it saves my mobile data bundle when i'm on the bike. (out of wifi range)
I was a bit confused about artists i don't know, but those are the demo songs, i'll remove them using AndExplorer.
∆○×□ PSP1004 (Phat 1st gen.) 5.00 M33-6 (+1.50) + 32GB Pro-Duo.
∆○×□ PS4 1.7X + 500GB hdd + Dualshock4 + PS4 Camera,
Xperia-Z1 Android 4.4.X + 32GB microSD + Philips SHB9100

Similar Messages

Easy Question! How Do I Play ONLY the Selection, and then playback stops?

How Do I Play ONLY the Selection, and then playback stops? (Same as subject..)
Thanks! I'm loving STP so far. I came from Sony Sound Forge so it's been difficult finding something that can compare, but I think I have it now! Lot's of advantages for STP too.

I think you're confusing the audio loops with MIDI loops. The blue loops are audio loops which will play only on audio tracks. You can't 'play' those with a keyboard because they are actual audio files. The green loops contain MIDI data that corresponds with a software instrument, and if you drop them onto a Software Instrument track, they will open that instrument which you CAN play with an external keyboard or the caps lock keyboard.
I might be missing some loops, but when I searched for Bell Tower I found only one, and it is a blue loop. So it can only be played as an audio loop on an audio track. However, if it were a green loop, you would NOT drop it on an external MIDI track (I think that's what you're trying to do if you're dragging it onto the 'Grand Piano MIDI instrument'), but you would create a SOFTWARE INSTRUMENT track, and drag it on that. Any internal sounds you want to play from Logic's instrument you'll do from Software Instrument tracks, and not MIDI tracks.
What you should do to find a good chime sound that you can play with the caps lock keyboard is to create a Software Instrument Track, open the Library tab, and search there for a good chime. This will search all of the instruments and presets that Logic has for all of its internal instruments. Try 'Tubular Bells' and see if that works for you.
If you need to use the bells from that loop, do what SC suggested, and take the hits from the audio file and load them into a sampler. Then you can play them the way you want to. If you don't know how to make a sampler, it's a bit complicated. Look up EXS24 in the manual, or check out
http://www.youtube.com/user/SFLogicNinja
I think he has a video or two on EXS24

How to play a video file stored locally in the system

hi
how to play a video file stored locally
thanks
mraj

Hi,
You can't do that in a simple way. You need to have a port open in the firewall, and you need to have a server process on the remote machine.
Kaj

I don't want file sent to 'space'. how do I cancel this file and only keep on my computer?

I don't want file sent to 'space'. how do I cancel this file and only keep on my computer?

I don't understand what you are asking; please clarify.
Also tell us your operating system and software you are using.

How to play the local flash file in nexus one smart phone?

In Nexus one smart phone(android 2.2), the flash file in the web site is played by browser,
But local flash file is not played.
How to play the local flash file?
Does not support local swf playing yet?

you can create from flash an AIR app that can be installed as a stand alone app on an android phone:
tutorial here
http://designupdate.com/blog/2010/07/27/air-for-android-access-the-microphone/

Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

R Cubss,
You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
http://www.adobeforums.com/webx/.59b6565c/43
Good luck,
Hunt

How to open a local file from javascript in a jsp-page

Hi
I have created an iview from a PAR file. In the par file I have a jsp-page with some javascript code. From the javascript coe I want to open a new window with an Excel file.
I have tried window.open("c:
test.xls", "test_window"), but it doesn't seem to work. I have created a small HTML page locally with the same command and there a new window opens with the Excel file.
If I change the local file path with an URL it also works.
Any idea how to open a local file ?
Thanks
/Jakob

Jacob,
I'm not 100% (but 99,9%) and it has to do with security ristrictions of the browser not allowing to have local workstation interation from the web. This is ofcourse very dangerous if the browser would allow it... So therfore it is blocked. What if somone would point to a file/executable that formats your drive so for that reason it is not allowed to have web interaction with a local file. Only with Java Applets this is possible but still with many limitations, and what I remember Google Gears and Adobe Air do have some limited web 2 local file interaction... So best and most simple solution you are left with is pointing to a url instead of a file on a c:\ drive.
PS The reason why it works when you start the html from your local PC has todo with the fact that the browser detects that the html is not running in the web at that moment therefor allowing the access.
Cheers,
Benjamin Houttuin

How to play a wave file through the DAQ board?

Hi there,
we want to play a wave file that is saved on the harddrive via the DAQ board. Means we want to connect a amp to the analog output of the DAQ to amplify the sound and play it through a speaker.
We couldn't find any VI that does that. Can anybody tell us how to play a wave file, or perhaps even send us a VI that can do that?
Thanks a lot for your help
Martin - Physical Optics Corporation

Hi Martin,
The only example that I could find on how to do this was using our
older Traditional DAQ drivers version 6.9.3. If you're using Traditional
DAQ drivers, the vi can be found here.
The example reads a 8-bit mono .wav file (an example .wav file is included in the .zip file) and writes it to the analog out of your DAQ card. I've updated the
example to work with our newer DAQmx drivers and attached it here.
I hope this helps,
Paul C.
Message Edited by Paul C. on 08-14-2007 05:47 PM
Attachments:
daqmx_wav_file_to_ao_output.zip ‏27 KB

IPhone plays only one playlist and won't others

Hi guys,
can anyone help me; I have my iPhone for so long time, always updated with latest version of software, but recently after latest update 3.1.3. iPod plays only one playlist and won't play any other. Also can't enter any other artist file or videos. When I try to, Ipod closes! The rest of phone works fine.
Could it be problem with latest update? How can I reset latest update?
Thanks!

The latest update works fine for most people, but your's might not have been applied correctly for some reason.
Try the standard troubleshooting steps in order:
Restart your phone: Press and hold the Sleep/Wake button for a few seconds until a red slider appears, and then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
Reset your phone: Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
Restore your phone: Restore: http://support.apple.com/kb/HT1414
Make an appointment to have an Apple Retail Store Genius look at your phone. http://www.apple.com/retail/geniusbar/
If you're in the US, call U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
If somewhere else, find the contact number here: http://www.apple.com/support/contact/phone_contacts.html

How to excute a local file?

Hi. Experts.
I want to excute a file (like aaa.doc) when i click a file after uploading in alv.
How to excute a local file?
I used behind command
    lv_filename = ls_zdmt03-filenm.
    cl_wd_runtime_services=>attach_file_to_response(
       i_filename               = lv_filename
       i_content                = ls_zdmt03-filecontent
       i_mime_type              = ls_zdmt03-filetype
       i_in_new_window = abap_true
       i_inplace                = abap_true ).
But do not excute one. just open a browser and quickly close a browser.
Please help me.
Thanks
Regards.

What do you mean by execute a file? You say execute, but then in your example you list aaa.doc. A word document doesn't need to be execute. The cl_wd_runtime_services=>attach_file_to_response will download a file (like a word document) and the browser will open it in its default program. Is that not what you want to happen?
What kind of file do you actually have? Is it on the server or the client?
If you want to execute applications on the client machine, then you can consider the UI element ACFExecute - as of NetWeaver 7.0 Enhancement Package 1.

How to play a FLV file located in a second FMS?

How to play a FLV file located in a second FMS not directly accessible by the flash client?
- I am publishing an audio stream from the flash client to a FMS;
- This FMS then publishes the stream to a second FMS, which records the stream to a FLV;
How can I play in the client the FLV audio file that I recorded in the second FMS?
- The first FMS is accessible by the flash client, but the second FMS is only accessible by the first FMS.
thanks in advance
fabio

Answer in http://www.flashcomguru.com/forum/forum_posts.asp?TID=4276&PN=1&TPN=1

How to store character in file and display result on front panel

hi
currently i m working on FPGA project.i want to aquired data from FPGA board.i want to know about how to store character to file and contineous display each character on front panel in string format.
i have complete up to character display on front panel but only single character display when i want all character in string format.
Solved!
Go to Solution.

I don't see how this question is at all related to Digital I/O but it sounds like you just need a shift register with the concantanate string function.

Time machine: I get the following message: The backup disk image "/Volumes/Data-1/Clemens's iMac.sparsebundle" is already in use - what to do? Where and how do I find that file and get rid of it?

time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?

I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time.

How to delete a local file in the presentation server.

Hi All,
How to delete a local file in the presentation server. As we do using 'delete dataset dsn' in application server. How can i achieve this. My requirement is after uploading file using gui_upload, i want to delete that source file. Please let me know, how can i achieve this.
Thanks in advance.
Regards,
Vishal

data: l_rc type i.
data: f_name type string.
    move 'c:\YourFile.txt' to f_name.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_DELETE
      EXPORTING
        FILENAME             = f_name
      CHANGING
        RC                   = l_rc
     EXCEPTIONS
       FILE_DELETE_FAILED   = 1
       CNTL_ERROR           = 2
       ERROR_NO_GUI         = 3
       FILE_NOT_FOUND       = 4
       ACCESS_DENIED        = 5
       UNKNOWN_ERROR        = 6
       NOT_SUPPORTED_BY_GUI = 7
       WRONG_PARAMETER      = 8
       others               = 9
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

Walkman : how to play only local files and no network related media.

Similar Messages

Maybe you are looking for