Walkman tape player to line-in no internal speaker response

Hello :
Walkman connected to Line-in socket.
In Preferences :
Input set to "line-in", in/out volumes "full", mute "off"
Input level shows signal from tape player is being received.
Output set to "internal speakers", balance 50:50, volume full
The Walkman works with earphones. Tape is good and can be heard using earephones connected to Mac headphone socket.
However, despite all this, there is no sound from the PB internal speakers.
Any ideas ?
Thanks : DW

An Intel iMac is not an G5 iMac. See Knowledge Base Article http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
Suggest that you repost over in the Intel-based iMac Forums where users using the same model computer as yourself will be able to help you.

Similar Messages

  • Recording from tape player with line-in feat

    Hi All-
    I got my Zen Nano plus a few months ago after failures with 2 other mp3 players. I really like the idea of being able to take recordings from my tape player. However one feature that is very annoying is that it will stop when the level gets too low and then start again when the tape starts up again. When I am trying to capture voice, I'm loosing a lot of the beginings of words. Is there any way to disable or get around the on -off and have it record continuously? Or are there other mp3 players or HD players that have this feature?
    Many thanks
    Ann

    The best idea is to convert from analog tape recording to digital files on your pc. The processor on the pc is much much more powerful, and the conversion programs that run on the pc offer so many options to help enhance sound quality. After the conversion is made on the pc you could then use a processing program to raise the volume on the softer parts of the recordings. The Nano Plus is an excellent mp3 player, but its line in quality and microphone quality are not so good.

  • Line-out or internal speaker option

    I have my iMac hooked up to my home stereo with a mini to RCA cable and i am trying to figure out a way to switch from home stereo to internal speakers without having to unplug the cable every time. Any help would be great. Thanks.

    Hello,
    do you think i will be able to do it using the
    optical output?
    I don't know.
    I edited my original post with a link to a program you could try.
    Now, if that doesn't work, then I do have one other idea that just came to me.
    You could get a USB audio output for your speakers. Now, with a USB audio output device, you would be able to change your audio output option using the "Sound" preference pane in the Mac OS X preference panel.
    I think Griffin has a product for that.
    So, that might be an option.
    Hope this helps.

  • Can I hook up an audio tape player to my Powerbook?

    I have a few audio tapes that I desperately want to transfer over to CD Is there a way to do this via the Powerbook? And if so, what kind of connection can/should I use to hook up my tape player and my Powerbook?

    You can use a standard 1/8th inch to 1/8th inch cable like those found at Radio Shack (links to example cable).
    If the tape player doesn't have a headphone port to connect to that type of cable, you can probably get an adapter so that it does connect. Once you have that, the software called Audio Recorder records direct to MPEG-3 or AIFF. Together with the Lame Encoder, Audacity works quite well to edit MPEG-3s.
    Be aware and follow any copyright restrictions on those tapes.
    Note, also some headphone ports don't have enough power to give audio of the strength needed for the audio input of certain machines. If it doesn't Audio Recorder will show no input. Ensure that Apple menu -> System Preferences -> Sound -> Input has the line in selected before launching Audio Recorder and after connecting the cable. For those where the input isn't sufficient, sometimes using a Griffin iMic is better.

  • Inserting a line in a internal table

    Hello guys , I want to insert in the forst line of my internal table son titles in order to move the entire table to txt file , But I dont kno how I can put the titles in the first line, any suggestion ? DO I have to use a index?

    Where are you writing the text file??
    If you are using GUI_download, then you can pass the header text( in a different internal table) to the FM.
    If you are using open dataset you can write the header first and then the internal table.
    I dont think inserting text in the data table is a good idea.

  • How can I search the last line in an internal table?

    How can I search the last line in an internal table?
    With a describe?? If it is , how can I do that?
    Thanks!!

    Hi shilpa,
    it seems to be you are NEW to SDN. welcome. if you want to get solutions to your Questions, you have to post a NEW thread.dont use the existing thread to post your question.
    any way i am giving you the solution for your question
    LOOP AT ITAB WHERE F1 = <SOME VALUE>
                       F2 = <SOME VALUE>.
    ENDLOOP.
    IF SY-SUBRC = 0.
      ITAB WILL HAVE THE LAST RECORD which satisfying the given criteria in WHERE clause of LOOP.
      write itab <--this ITAB will have the last record.
    ENDIF.
    regards,
    Srikanth.
    Message was edited by: Srikanth Kidambi

  • To delete the last line of the internal table

    How to delete the last line of the internal table.???????
    The list which gets displayed from the internal table adds a dummy line at the last which shows zeros and zeros.all the otheer selections are perfect.i just want to delete the last line which comes as zero zero.is there any way to do it...

    Quite Easy......Use Describe command to Count the Total Number of Table Lines, and then Delete the Last Line using Index.
    Data L like sy-tabix.
    Describe Table Itab Lines L.
    Delete itab index L.

  • Difference between line type and internal table?

    Hi..
    I wanted to know, what is the difference between Line type and Internal Table?

    Hi,
        Before the 4.7 release in SAP if we want to define an internal table we have to write the defination using the occurs statement and we need to define all the fields using INCLUDE STRUCTURE or indidually all the fields ine by one.
    From 4.7 release of R/3 SAP introduced the Line type concept and it's part of the ABAP OOPS concept. for internal table defination we don't need to use the occur statements. Instead INCLUDE structure  we need to create a Line type for that structure in Se11 and then we can define the internal table like :
    DATA : ITAB TYPE TABLE OF <LINE_TYPE>.
    Only thing is this table will be  a table without header. So for internal table processing we need to define a work area structure of type line of line type  . EX:
    DATA: WA_ITAB TYPE LINE OF <LINE_TYPE>.
    Hope this helps.
    Thanks,
    Greetson

  • Lines in an internal table?

    How to get the number of lines in an internal table?

    Hi
    Check this
    DATA: BEGIN OF line,
             col1 TYPE i,
             col2 TYPE i,
          END OF line.
    DATA itab LIKE HASHED TABLE OF line WITH UNIQUE KEY col1
                                        INITIAL SIZE 10.
    DATA: lin    TYPE i,
          ini    TYPE i,
          knd(1) TYPE c.
    DESCRIBE TABLE itab LINES lin OCCURS ini KIND knd.
    WRITE: / lin, ini, knd.
    DO 100 TIMES.
      line-col1 = sy-index.
      line-col2 = sy-index ** 2.
      INSERT line INTO TABLE itab.
    ENDDO.
    DESCRIBE TABLE itab LINES lin OCCURS ini KIND knd.
    WRITE: / lin, ini, knd.
    Hope it clarifies.
    Praveen

  • Modify a line in an internal table

    Hi Friends,
    I have an internal table . I need to set a flag in the internal table and modify only that line of the internal table .Please advise .
    ex :
    Loop at itab.
    If sys-subrc <> 0 .
    itab-flag = 'X' .
    Modify  ?
    endloop.
    Thanks,
    Teresa

    data l_index type i.
    Loop at itab.
    l_index = sy-tabix
    If sys-subrc <> 0 .
    itab-flag = 'X' .
    Modify itab INDEX l_index
    endloop.
    Regards,
    Atish

  • Guys ... I have a 2008 MacPro running the current Yosemite.  I also have installed the sound amp called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up to BOOM! Instead, it boots up to the Internal speaker. What's up?

    Hi Folks ...
    I have a 2008 MacPro running the current Yosemite. I have installed the recommended upgraded video card, but the sound is as it was new. I also have installed the sound amp/graphic equalizer called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up automatically to BOOM!  and thus to the external speakers.  Instead, it boots up to the Internal speaker.  According to the folks at "BOOM!", this is happening to others who have similar Macs.  They can't find any explanation within BOOM!, so I am turning to you all.  Any ideas?

    Hi Kappy ...
    Sorry, I guess I didn't state the problem very well.
    I don't want the computer to boot up to the internal speaker.  I want it to boot up to the external speakers.  However, even though System Preferences is set on Line Out, when the computer boots up or reboots, it erroneously goes to internal speaker.  So, every time I boot up, I have been going to System Preference/Sound and clicking on Line Out.  From that point on, everything is OK until the next boot up.  It is a small annoyance, but annoying all the less. The simple explanation seems to be that when the computer is shut down, it does not hold the setting for Line Out and resets itself to Internal Speaker.  How do I change that behavior and get it to go to Line Out whenever it boots up? 

  • After selecting Line Out in preferences the next boot sends sound to internal speaker

    How can I get Line Out to to stay as default audio out preference?

    I have a very similar problem that occurs to my computer where I will return to my computer after it has gone to sleep, and sound controls do not work. All systems tones come from the internal speaker, as well. After doing a Google search, I came up with an AppleScript to make it change to the internal speaker, then go back to the line out. The script works with the default listings in the sound preferences panel, but you should be able to change it to whatever is listed in your Sound preferences pretty easily. To do it, go to Applications, Utilities, AppleScript Editor. Once there, paste in the code below into the top box. Then do a file, save as. I would change the File Format to Application and save it on your desktop. You could create then a shortcut in your dock to launch it whenever sound is not working right. The script follows this (copy it all from the first tell to the quit):
    tell application "System Preferences" to activate
    tell application "System Events"
    get properties
    tell process "System Preferences"
    click menu item "Sound" of menu "View" of menu bar 1
    delay 2
    set theRows to every row of table 1 of scroll area 1 of ¬
    tab group 1 of window "sound"
    set theOutputs to {} as list
    repeat with aRow in theRows
    if (value of text field 1 of aRow as text) ¬
    is equal to "Internal Speakers" then
    set selected of aRow to true
    exit repeat
    end if
    end repeat
    end tell
    end tell
    tell application "System Events"
    get properties
    tell process "System Preferences"
    click menu item "Sound" of menu "View" of menu bar 1
    delay 2
    set theRows to every row of table 1 of scroll area 1 of ¬
    tab group 1 of window "sound"
    set theOutputs to {} as list
    repeat with aRow in theRows
    if (value of text field 1 of aRow as text) ¬
    is equal to "Line Out" then
    set selected of aRow to true
    exit repeat
    end if
    end repeat
    end tell
    end tell
    tell application "System Preferences" to quit

  • Can I record music/voice from a tape player?

    Is there some way I can connect a tape player to my MacBook Pro and record the contents of a cassette tape?

    Sairy wrote:
    I'll try Audacity.
    There are a number of Mac audio editors out there (Sound Studio, Amadeus, TwistedWave, Wave Editor, etc). Audacity is free and quite powerful, but its interface is less polished and not very Mac-like, and some its features are rather idiosyncratic. If you haven't used an audio editor before, that shouldn't bother you -- much. Make sure to read the documentation to understand how it works.
    If you use Audacity, remember that it uses its own .aup format. You should export the original recordings to AIFF or WAVE and keep them, in case you want to go back and re-edit them with other tools.
    I have a basic cassette player
    Remember the basic law of computing: GIGO. It really depends on how much those recordings mean to you, but, IMHO, you should record from the best player you can lay your hands on. No amount of later processing can make recordings from the output of a bad player sound like the output of a good player.
    tapes we have to put on CDs
    Don't expect too much. Stuff that sounds acceptable on a cassette player may sound awful on a CD player, because the CD's much higher audio quality will lay bare all the shortcomings of the original tapes. Experiment with Audacity's noise reduction filter. Check also Audacity's wiki, I think they have some instructions specifically for digitising analogue audio tapes.

  • I want sound to go to line out but each new boot it selects internal speaker

    I select sound to go to line out but with each new boot it reverts internal speaker. How can I "save" my sound preference??

    Hi Del.
    First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.dock.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • I recently used the computer for I player over the TV, but when removing the external speakers the internal speaker appears to have stopped working and when going on to system preferences and sound I am only given the option of digital out put. Help

    I recently used the computer for I player over the TV, but when removing the external speakers the internal speaker appears to have stopped working and when going on to system preferences and sound I am only given the option of digital out put. Help

    Do you see a red light shining in the headphone port?

Maybe you are looking for