Walkman won't read files on sd card xperia z2

Transferred music using media go on pc. However Walkman won't read or play files. They do work as I have tried card in old phone and my laptop and ps3.
Any ideas
Solved!
Go to Solution.

Anytime
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

My Macbook Pro won't read my Compact Flash card

Here’s the problem.
Mavericks won’t acknowledge the existence of my Compact Flash card when presented in a card reader (I have tried two readers). It is a card I have been using with Lion on my Macbook Pro for some time quite happily.
There is nothing wrong with the card; it works just fine in our Windows machine and in my camera.
My Compact Flash card is a Kingston 4Gb card. It was formatted in the camera.
The camera was bought approx 2003. Its a digital Pentax Optio 33GS (top of the range at the time shooting 3.2 megapixels!).
On my Macbook Pro 15” (bought new approx 2010) the card does not appear in Finder but does appear in Disk Utility.
The information for the main entry on the LHS in Disk Utility is displayed as follows:
Disk Description: 4Gb Generic Storage Device Media
Write status: Read/write
The sub entry which appears as disk1s1 on the LHS is:
Mount point: Not mounted
Format MS-DOS (FAT16)
I attempted to erase the Card using Disk Utility; I selected the main entry on the LHS and I chose the format MS-DOS (FAT). This returned a Disk Erase Failed msg “Wiping volume data to prevent future accidental probing failed.”
I then tried again, this time selecting Windows NT File system (Tuxera NTFS) as I have Tuxera installed. This did not work either; it failed with the same error msg.
OK so then I tried Mac OS Extended (Journaled) but this failed as above also.
I am not quite sure why, but when I reinserted my card into my camera, my camera could not read the card so I had to reformat the card within the camera.
Oh yes, I also tried rebooting my Macbook with the card inserted but this made no difference.
I have run our of ideas. All help gratefully received.
Thank you. Carol
PS ... apologies to anyone who saw my previous post in which I referred to my card as an SD card when in fact it is a Compact Flash card
MacBook Pro, OS X Mavericks (10.9)
I have this question too (0

Okay, I am making progress here now.
Using the link in my message above timestamped Dec 13, 2013 4:24 AM, I filed a tech support request describing the problem. Because they asked for details to confirm that the problem was with their product, I copied and pasted pretty much verbatim the text from my message above.
Around noon, same day, I got a message back from technical support saying they were sorry for the problem and would provide me with a replacement unit. Two hours later, I got a message from their RMA department saying that because the product has a two year warranty, they needed a copy of my receipt. I located a copy of my receipt for the purchase from Amazon on September 10, 2012 and forwarded that to them.
At this point, I am optimistic that it's going to work out okay. So far, I am very impressed with the responsiveness of Kingston's technical support and customer service departments.
If I actually do receive a working replacement, I will post an update here.

IPAD won't read my photo SD card

I know this has been discussed before.
I try to load my camera SD card photos and get a message saying it won't recognize the USB.
I am going on vacation in two weeks and just want to take my IPAD so I need get this resolved.
Help!

Are you using the Apple camera connection kit, and you using the SD reader part of the kit or the iPad to camera cable ? If the SD reader then are is the camera putting the photos on the card, or you adding them via your computer ? If you are adding them then you need to create a DCIM directory off the card's root, with the photos underneath it with filenames exactly 8 characters long (no spaces) plus their file extension

Adobe reader app no longer reads files on sd card

The Adobe Reader app that I am using on my samsung galaxy s4 stop reading the PDF files on my SD card after its latest update. I can still see the files using other apps and I can access the files using Adobe Reader as long as I click on the file first. But if I am in the Adobe Reader app and I am under documents it doesn't read any of the files. I can't find the SD card under all PDF files view or under the folder view. It was working and then it stopped. What can I do?

Android 4.4 (KitKat) introduced big changes to SD card support.
Android KitKat Blocks Some Access to Micro SD Cards
You can find many other articles regarding the SD card problem by searching on the internet.
We will be investigating the problem.
To work around the problem in the meantime, could you copy some of the PDF files from your SD card to internal storage (e.g. /storage/emulated/0/...) and see if Adobe Reader can read from and write changes to PDF files on your internal storage. (It should work based on my limited testing. But please verify it.)
You can use any Android File Manager app to move/copy files. Samsung phones and tablets typically has "My Files" as the built-in File Manager.
Alternatively, you can transfer the PDF files to Acrobat.com (free cloud storage service) and access them from Adobe Reader.
Please let us know if any of the suggested approaches work for you.
Sorry for the inconvenience.

Ipad 3 won't read photos from sd card

Tried both inserting card into camera connection and using cable connection from camera. Neither work.

Hello there, Debbyresq.
The following Knowledge Base article provides some great recommendations and additional information on using the Apple iPad Camera Connection Kit with your device:
iPad: Using the Apple iPad Camera Connection Kit
http://support.apple.com/kb/ht4101
Improving performance
For best results and performance, see these guidelines:
Connect the iPad Camera Connector or SD Card Reader directly to the iPad and digital camera.
iPad Camera Connector only supports digital cameras and some USB audio/MIDI devices. Learn about using the iPad Camera Connector with unsupported USB devices.
If your device isn't recognized, verify that it's configured correctly. See the user manual for your device for more information.
Certain devices may be recognized only when used with a powered USB hub.
Here are the supported SD cards and image-transfer protocols:
Picture Transfer Protocol (PTP)
Mass Storage Device protocol
SDSC
SDHC
miniSD
microSD
MMC
SDXC
If your camera supports both PTP and Mass Storage Device modes, you may need to use both modes to import all media content. If some files don't import as expected using one mode, try switching to the other mode and importing again.
Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.
If you see a message that the "Attached volume appears to be invalid," make sure the SD card or digital media in the camera is correctly formatted.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

MacBook Pro suddenly won't read SanDisk 8G memory card, nor Canon T2i USB connection.

Suggestions?
I've plugged the memory card into the slot several times not even a week ago and it worked just fine...now it won't.
I have tried plugging the camera in via the USB hook up and nothing happens but yet it works fine on other computers I've used.

I just received the following helpful URL link from SanDisk tech support.
http://kb.sandisk.com/app/answers/detail/a_id/60
SanDisk responded within 5 hours of my inquiry. After removing all USB devices from my iMac and reinserting the card reader alone, the reader started working again. I ejected it numerous times from USB ports on the iMac as well as from a USB hub. After plugging my other USB devices back in, I have not detected if there was a device which was causing the conflict. As a precaution I have removed USB devices that are only used periodically such as a Colorvision Spyder2Express device used every 30 days or so to color correct my monitor.
Hope this helps others with Mac card reader issues.

Read from text file vi won't read file...

I am very new to LV programming so I hope you forgive any stupid mistakes I am making.   I am using Ver. 8.2 on an XP machine.
I have a small program that stores small data sets in text files and can update them individually or read and update them all sequentially, sending the data out a USB device.   Currently I am just using two data sets, each in their own small text file. The delimiter is two commas ",,".
The program works fine as written when run in the regular programming environment. I noticed, however, as soon as I built it into a project that the one function where it would read each file sequentially to update both files the read from text file vi would return an empty data set, resulting in blank values being written back into the file. I read and rewrite the values back to the text file to place the one updated field (price) in it'sproper place. Each small text file is identified and named with a 4 digit number "ID".   I built it twce, and get the same result. I also built it into an installer and unfortunately the bug travelled into the installation as well.
Here is the overall program code in question:
Here is the reading and parsing subvi:
If you have any idea at all what could cause this I would really appreciate it!
Solved!
Go to Solution.

Hi Kiauma,
Dennis beat me to it, but here goes my two cents:
First of all, it's great to see that you're using error handling - that should make troubleshooting a lot easier. By any chance, have you observed error 7 when you try to read your files and get an empty data set? (You've probably seen that error before - it means the file wasn't found)
If you're seeing that error, the issue probably has something to do with this:
Relative paths differ in an executable. This knowledge base document sums it up pretty well. To make matters more confusing, if you ever upgrade to LabVIEW 2009 the whole scheme changes. Also, because an installer contains the executable, building the installer will always yield the same results.
Lastly, instead of parsing each set of commas using the "match pattern" function, there's a function called "spreadsheet string to array" (also on the string palette) that does exactly what you're doing, except with one function:
I hope this is helpful...
Jim

G5 won't read my new memory cards now?

Ok, so after going through a whole mess of getting the wrong memory cards (see this post: http://discussions.apple.com/message.jspa?messageID=8321578), I ordered new ones (which fit in just fine), but now that I've inserted them, the computer isn't recognizing them.
Yes, I've got them all the way in so the latches close, fitting into the slots on the side of the card, and they look as far in as the ones that were already in the system. Yes, I installed a pair, label side up. And yes, I followed Apple's online manual about putting the first sets in the slots marked 1, and now this is my first set for a pair of (outside) slots marked 2.
I've done and checked all this, but still when I check my Memory in the system profiler, the slots come up as empty.
I also tried resetting the NV-Ram by doing that apple/option/o/f thing, since I saw it suggested in another threadin this forum. Still the same issue. Am I missing some obvious step (I did follow the online manual) or any ideas of what could be wrong?

I'd bet you bought high-density ram. The G5 cannot use high-density ram so if that is the case you will have to exchange it for low-density ram which can be somewhat hard to find these days.
The best bet is to buy from a company that lists/sells RAM by computer model rather than memory speed/type.

Won't read file.

Adobe Reader is saying I need the latest version to read a file. I have the latest version and have read other files successfully. What might be the issue?

Are you opening a pdf from within a browser? If so, which one and what OS?

MBP won't read my SD card?

So here's the issue:
My MacBook Pro won't read my 4GB SD card from my camera. I was able to transfer all of my images earlier this afternoon but now it plainly won't show up. I checked Finder, I checked Disk Utility, and nothing. The Nikon software doesn't recognize it either. It's not like I have a whole boatload of photos to transfer (I only have four pics to transfer). Earlier, I installed the software after I ejected the card, but did not put it back in afterwards. Could it have something to do w/ the software I just downloaded?

If you are using a DSLR camera, like for example a Canon 60D, there may be an option to use a "Low-Level Formatting" on the card. This should make it writable when putting it into the computer.
To test this (and confirm it works) I did the following:
Hardware Used:
Canon 60D camera body
Sandisk 32GB SDHC Extreme Card
Macbook Pro 15" (mid 2010 model) with built-in SD card slot.
Steps:
Place SDHC card into camera (SD card may work as well). Navigate through menu until you arrive at settings that allow the camera to format the card. There may be an option to format it "low-level", which you would then select.
-Note that all files on card will be erased permanently.-
After the camera formats, eject the card from the camera, and place inside the built-in SD slot on the Macbook.
The card should automatically mount, containing both read and write priviledges.
Hope that helps.
~Charlie~
Owner/Founder HotTips! LLC
<Link Edited by Host>

Won't read the SD Card after going in for repairs

HELP - my 8520 curve won't read it's SD card? i know it's definately not the card as my wife just got a new BB also and it came with a brand new card that can't be read either. Thought i could live with it............ but can't. You can't have any music, video content etc............ My first blackberry died in a pint of guiness (don't ask), i took the sd card out before the insurance claim and had my fingers crossed that it would have survived the black death, but when my new replacement BB came it couldn't read the card.......... which i thought was down to the black stuff - initially.
However since then i've tried different cards leaving me to believe i may still have the data on the original and that the phone or card reader is cream-crackered? any clues?........ thanks in advance.

I've read on some forums this could be a card formatting issue, anyone got any thoughts on that?

Cannot see optical drive or read files from superdrive

This is my first ever posting so I apologize if I’m giving too much info.
A couple years ago I installed a Pioneer DVD-RW DVR 107D in the top bay of my G4 (mirrored doors) and put the combo drive (Philips CDD5105) in the bottom bay. Back then I was running OS 9. All worked well, and continued to after I decided to start using OS X. I continued updating all the way up to 10.4.8 (I have avoided updating to 10.4.9 since it caused issues on our IBook). About a year ago the combo drive would come and go (in the system profiler) but the super drive was still working fine. Over the past year strange things began happening. If I would insert a kids games CD it would cause a kernel panic. So I simply used our Ibook to let my daughter play reader rabbit. For about the past 6 months the combo drive has not been recognized in system profiler. But other than the kids cds the super drive seemed to be working well reading & writing both CDs & DVDs. Then it began to error out burning CDs saying they could not be verified but the CDs were turning out ok it was burning DVDs without a problem. Within the last couple weeks it stopped recognizing files correctly. If it is an image or ai document it would say the files could not be opened and it would also not open installers of any kind. I finally decided to try to get it fixed. Last weekend I ran Tech tool & optimized the hard drives and low and behold it was fixed. Combo drive was back & working, Super drive was working correctly & the kids CDs did not cause problems either. This lasted for about 4 days of very infrequent use and all the problems were back. Then yesterday after being off for a couple days I started it up and all was ok again. So I left it on over night planning to make a disk image of it today. At this point I had a theory that my set up might be causing the problem. Since I had been running OS X it was installed and running on a second hard drive I had installed connected to a slave bus while OS 9 was still on the original hard drive connected to the master bus. So I cleaned off the main hard drive and thought since it was working correctly I could transfer the system & apps to the other hard drive and save the working disk image. But of coarse in the middle of transferring files around the combo drive vanished again and the super drive won’t read files correctly. So I decided to reinstall from my OS 10.4 DVD on the main hard drive and reinstall all my apps. But I can’t get it to read or boot up from the DVD. I tried running Tech Tool again with no luck.
Could this be as simple as a bad preference or something?
Here are the machine specs
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1.75 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.4.8f2
PowerPC G4 dual 867 Mac OS X (10.4.8)

The only thing that seems strange about it being the drives is that whenever the combo drive disappears from the menu the super drive will simultaneously not read files correctly and cause kernel panics etc. And when the combo drive can be seen both drives work with no problems. Would that system still point to failing hardware? It just seems that since it's either both or neither that something that effects them both would be the culprit. Since I posted I was able to reload tiger & after the restart the problem returned. Then another restart it was fine all day. To your point replacement drives are reasonably priced & easy to install so I probably should just get one & try it.
Thanks for your advise
Carl

IMAC won't read sandisk 8gb sdhc from canon hf m-31 hd camcorder

IMAC won't read Sandisk 8GB SDHC card from Canon HF M-31 HD camcorder

Your camcorder is fine with iMovie 09. My suggestions are two;
1)Canons sometimes take a little bit of effort to connect. Try disconnecting and then reconnecting your camcorder. Try shutting down iMovie and then turning it back on. I have a Canon hf100 usb camera also and love it. I just put up with the odd frustration of it sometimes not recognizing the connection.
2) Click on the camera icon in the main iMovie interface (middle, extreme left). See if your camera is "seen" my iMovie. If not, try disconnecting and reconnecting the camcorder.
Hugh

IMovie won't read all my Canon HF100 files.

I have a Canon HF100 camcorder. I record in FXP or 1080 HD video mode, 60 frames. My PC reads and imports the video just fine.
I have a brand new Macbook Pro 15" intel cpu machine with iMovie 09. When I use one of the memory cards to import video it works fine. When I use the other memory card to import video it doesn't even see the camera. It will import pics from it into iPhoto and mounts the camera so you can see the files but iMovie won't even recognize it.
The cards are both formatted fat 32, all video on both is recorded in the same format, both cards had pictures on them as well as the video. I have tried everything I can to get iMovie to read the files, everything suggested on the forums and researched the heck out of this. It won't recognize one of my cards, even though everything else on the mac will. I have 14 gig of HD video to import and am running out of options. I don't have the money to buy another program just to get THIS program to read the files. iMovie 09 was supposed to be HD compatible....why doesn't it have native .mts file support? these cameras have been out for over a year or two and are some of the more popular ones around now. Please help if you can!!!!

D. Thomas Lamourine wrote:
well, it seems that the card is bad from what you say. Are you plugging the camera directly to the mac? or using a card reader? what type of card? (guessing MMC/SD card?) how big is the card? if you can get it to show on the desktop then make a folder and manually drag the files off the card and into the folder a few at a time. You will probably find one or 2 corrupt and wont move over so don't try and do them all at once because it'll just bog down. do the smaller ones first!!
you may also find that very large files SEEM to be not seen but it's just the USB/Firewire/system need a LOT of time to transport and convert the file into mac.. (not really what it's doing but give you and idea)
As was stated you may need to reformat the card because its got bad data areas/blocks. From what you are stating it's more than likely the card, not the computer/software.
I have had issues with a friends camera importing to Imovie. My camera and his both record in AVI format but mine I can import directly where his I have to run it through Quicktime Pro and convert to MOV files.. why? no clue but it works.
I would love it if it was just a bad card but check this out. The files are all perfectly fine. They can be copied to my mac no problem. I imported them all to my Windows PC and they play / edit just fine. I'm working with a free file converter to change them into what, mpeg4? I really really don't want to buy VoltaicHD just for a memory card worth (albeit 16 gig of video) of video. I DID find this on Canon's website....
+Issue: What is the Mac compatibility of my camcorder?+
+Solution: The digital video solutions disk is compatible with Mac OS 10.2 up to 10.4 for stills only. No video related software is provided.+
+The video connectivity of the Canon DVD and Hard Disc Drive camcorders provided by the software bundled with them is designed for use with Microsoft Windows XP Service Pack 2 and Microsoft Windows Vista only. The Sonic Roxio My DVD software included with some models is only compatible with the Windows XP SP2 operating system when combined with a computer supporting the USB 2.0 specification.+
+Macintosh OS10.4.3 and up users may be able to view the contents of a finalized disk or files recorded onto the hard drive (for hard disc drive models) on the computer when it is connected to a USB port on the computer. With a finalized disk loaded into the camcorder the camera should show up on the desktop as a mounted drive and files may be copied (dragged) from the disk using normal procedures. Any desired editing, playback or other features may require additional third party software.+
+Note: Proper operation is not guaranteed.+
Now I already have reformatted the card and put the files back on it, still no dice. I've tried everything I can think of, I have no other codecs on my machine but QT native codecs. From what Ive read on the forums and such it seems that iMovie and the lack of support by Apple for .mts and .m2ts file formats in general is the main problem. It seems people have random problems with HD camcorders. Some people it works fine for and some it doesn't..I am one of the unlucky ones with intermittent compatibility. Fun. I have spent SO much time on this problem I almost took my mac back. This is my first Mac and while I love it to death, I am getting real tired of the unsupported crap and having to download other programs to get it to work right when it was supposed to do so in the beginning. I'm not trying to rant, just really frustrated at all the extra expense after having paid 2400$ for what was supposed to do it by itself. From what Canon said on their website, apparently there ARE issues with mac compatibility and it may or may not work. yay. Oh well, I guess I'm stuck paying for more 3rd party software.
Also, yea, I cannot import AVI files into iMovie even after I installed divx...good stuff.
Message was edited by: Stormborn

Lightroom won't read SONY RAW files

I've upgraded to 1.2, installed it once and then again to see if I could repair the problem. I am shooting a SONY A700 and Lightroom won't recognize my RAW files on the card or when I copy them to my hard drive. LR does see jpegs on the card when I shoot them, and yes I have checked the box that says to treat RAW and jpegs as separate files.
If I put only jpegs on the card it reads them, if I only put RAW files on it says no images on card.
Any suggestions?

To be honest I have not tried looking at my older MRW files as I have not used my 7D in awhile. I will look tonight to see if I can read them in LR, but I'm not qualified to speak on whether the information LR is reading is correct or detailed enough. I'll just see if I can edit them to my satisfaction. I don't get into the mechanics other than to do what I need to improve my photos.
My original problem was getting the Adobe downloader to bring in ARW files, but now I just pull them off the disk and have disabled the downloader, which works fine for ARW.
Just read the previous question and see it was answered on MRW files. I have been editing ARW raw in lightroom and it seems to work with all functionality. I think the program is indispensible to my A700 and they work wonderfully together.

Walkman won't read files on sd card xperia z2

Similar Messages

Maybe you are looking for