Wall charger for iPod Nano

Hi … I am considering to buy a iPod Nano. I use an 800MHz eMac which includes a few USB 1.x ports. Can these USB 1.x ports provide enough power to charge up the iPod Nano ? As I always travel around and cannot stay in front of computers. It seems that I need a wall charger. Does iPod still need to be fully charged by a wall charger in 4 hours ? Which model of wall chargers is preferred?

I haven't used it, but based on features I'd go with the Incase charger because it also is a car charger, and has a line out. Otherwise I'd probably go with the basic Apple charger, just based on what I see on the site.

Similar Messages

  • USB wall charging for ipod

    Apple wall charger is too much costly so if u have an existing USB wall charger for ur camera or ur phone, use it to charge ur ipod.
    Make sure that the output ampere rating is min 1A.
    But if u have to buy one buy other makes like Phillips only for $7.
    I am using my Kodak camera charger with the OEM usb dock connector......no problrm at all.
    Save & donate for charity.

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • Need wall charger for ipod clickwheel 4th gen with Firewire cable

    i need a wall charger for my ipod clickwheell 4th generation that has a Firewire cable. i've searched these postings and have seen the cubes, but they are for a USB cable. how/where/what do i use for my Firewire cable ?
    thanks

    WOW ... so simple ... Amazon, ... who would have thought ...
    i called Best Buy and Radio Shack and neither of them could help me.
    thank you so much !
    i love this forum, you people never fail me !

  • Use charger for iPod Nano also for iPod Touch (4G)?

    I have a charger for my old iPod Nano 2G, can I use it on my now iPod Touch?

    Yes if the charger has a USB port.

  • Auto charger for iPod Nano (3G)

    Can anyone recommend an auto charger for Nano (3G)?

    This has become a moot point for me. I read somewhere that the Nano will play music for 24hrs. on a charge. I am using this in my car for listening to audiobooks. I ran a test last night running it for 14 hrs. with plenty of charge left. So I guess I do not need an auto charger after all.

  • USB and charging for iPod nano first generation

    I just got home and this is the first time I let my ipod just lose battery completely.
    I plugged the ipod into my computer to charge and have itunes open but nothing's happening
    how can I get it to connect?
    I just want to recharge from a dead battery

    What help di u find I left the ipod charging for 24 hours after i let it die and it still has no battery. please help and tell me how i can fix this problem.

  • HT3215 is there a wall charger for nano 8gb, sixth generation

    Is there a wall charger for a 8GB, Nano, sixth generation?

    Use almost any wall charger that plugs in like you plug your ipod to a computer.
    http://store.apple.com/us/product/MD810LL/A/apple-5w-usb-power-adaptor?fnode=74
    Hope this helps.

  • Speakers/charging dock combo for iPod Nano?

    I have a 3rd party home speaker dock, which works as a speaker, but didn't realize that the new Nanos don't let 3rd party stuff work as chargers. When the Nano is connected it says "charging is not supported with this accessory".
    What are my options in terms of docks that would both charge the Nano, and work as a good set of speakers (with good volume)?

    larselarsen wrote:
    Unfortunatly Apple are not being precise nor correct in their information regarding which systems work (charges) the Ipod Nano G4 ....
    There are literally hundreds if not thousands of accessories not made by Apple that claim some level of iPod compatibility. It is impossible for Apple to supply comprehensive data about which ones work with which (if any) iPods. Newer products sporting Apple's "Made for iPod" logo indicate that the manufacturer (not Apple) certifies that it meets Apple's specifications for iPod compatibility, but that does not necessarily mean it supports all features with all iPod models, especially charging the Nano 4G, & latest iPod Touch & iPhone models.
    Some accessory manufacturers now specifically list which iPod models each of their products supports in product literature, at their websites, or on the packaging. If so, be sure to check for any fine print or footnotes to make sure all the features work with a particular model! If you can't find this info, your best bet is to buy a product from a vendor with a good return policy or contact the manufacturer directly & request specific, detailed compatibility info.
    Note: there is a lot of confusion about the "Made for iPod" logo. To display it, a manufacturer must pay Apple a fee & sign a non-disclosure agreement to get access to the technical details that ensure compatibility with current iPods & timely notifications of changes in the specifications that might affect compatibility with future models. Apparently, notifications about the changes to the charging specs went out to participants quite some time ago, perhaps as early as 2005, but very few accessory makers have done anything about it until now. Of course, non-participants have always reverse-engineered their products for compatibility without Apple's help, so it is probable that they knew nothing until the new iPod models were on retailers' shelves.
    Complicating things even more, some manufacturers market both newer & older versions of some products under the same model name, or just slightly change the model name (like with a "II" suffix).
    The bottom line is "newer is better" but is in itself no guarantee that the accessory will charge the Nano 4G.

  • Where can I buy a wall charger for a third generation iPod Touch?

    Does anyone know where I can buy a wall charger for a third generation iPod Touch?  I am giving this iPod to my father because I want to buy myself a fifth generation iPod Touch for my birthday.  Could I just get an iPhone 3GS or iPhone 4 or 4S wall charger and use that?  I used my brother's iPhone 3GS wall charger, when I was visiting him out of state, and it worked just fine. 

    Any wall charger with a USB port will work. You can go to Target or BestBuy and other places too. An iPhone charger is fine.

  • Can i use my ipod shuffle wall charger for my itouch?

    can i use my ipos shuffle wall charger for my itouch?

    No you only can use the 30-pin connector to charge an iPod Touch.

  • I can't charge my ipod nano with a wall charger

    I can charge my ipod nano (3rd gen) via my computer but when i plug it in to wall charger it doesn't charge, it gives it power to work but doesn't actually charge it.

    Arrggh I have that problem too - was working fine and now suddenly stopped. I've asked on here and a couple of other forums but not had any luck yet. If you find anything out please let me know.

  • Can I use a different wall charger for my iPod

    can I use a different wall charger for my iPod

    But I mean you know the little white wall charger can I use a different one without being an Apple one ?

  • My daughter has tried to charge her ipod nano 6 on an imported italian computer and it has frozen the iPod...unable to do anything on it at all. screen currently says 'OK to disconnect.' No buttons work..HELP :+) ????

    My daughter has inadvertantly tried to charge her iPod nano 6 into an imported laptop. It has completely frozen all action.
    I have tried to hold - button or main button for suggested 8 seconds to RESET the iPod to no avail. SUGGESTIONS ?? :+)

    Myelo,
    Have you tried restting your iPod?
    You can do so by toggeling the hold switch back and forth a few times, and then holding the menu and the center button in for 5-10 seconds until you see the Apple logo.
    Kind regards,
    Ms Daisy

  • Do I have to use the Apple Power Adapter specifically to charge my iPod nano without using my laptop?

    CAN I CHARGE MY IPOD NANO WITHOUT USING THE APPLE POWER ADAPTER? Can I  use any of my many usb wall charging adapters instead?

    I am using my jambox wall adapter.

  • After updating itunes software, i was charging my ipod nano (older version) and now it says it is disrupted and won't come on

    After updating itunes software, i was charging my ipod nano (older version) and now it says it is disrupted and won't come on

    Hi, Jennifer. 
    First, try resetting the device.  The first article will walk you through this process.  I am unsure which iPod nano you have so I will include the basic article.  From there, select your version for troubleshooting steps. 
    How to reset iPod
    http://support.apple.com/kb/HT1320
    iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Hope that helps,
    Jason H. 

Maybe you are looking for

  • Mailing more than one photo

    I would like to be able to email more than one photo at a time. That is if any developers are reading this thread.

  • RAM Issues...Looks BAD!!!

    Hello again everyone. Here's my problem, i went out and got 2 sticks of PC133 RAM for my PowerMac G4 Quicksilver. I had already installed one 512 module and 2x256 modules for a total of 1gb. My plan was to take out the 2x256modules and replace both w

  • Error in Weblogic CMP RDBMS deployment descriptor

    I'm working on WL5.1sp9, Oracle 815. after successfully generated container, during deploying, show errors: Column 'PASSWORD', referenced in attribute-map element, was not found in database table. i'm sure the table is created, and column name exactl

  • Documentation for Oracle XML parser Classes and Interfaces

    I would like to use the oracle XMLParser V2 classes with JDeveloper 3.1, but I cannot find any reference documentation for the classes and interfaces in help. I am especially interested in a documentation for the XSLProcessor class. The only informat

  • Training and Event Workflows Issue

    Hi Workflow gurus, I am working on Training and Event Management Workflows. When I create a booking or pre-booking or cancellation, I am expecting one of the following workflows to trigger. WS 01200147     Approve Employee Attendance Cancellation WS