Wall mount bracket for AIR-ANT5160V-R

Hi all,
I am looking for a wall mount bracket reference, for these 2 models of antennas :
- AIR-ANT5160V-R
- AIR-ANT2506
Something like that :
I was not able to find any reference in cisco product list. Does anyone have an idea ?
Thank you

Hi Scott,
Thanks for your reply.
The picture I am showing is an example of what I have seen.
I am going to deploy lots of wireless sites, that's why I am looking for a reference of wall mount bracket I could buy to deploy easily the outdoor antennas.
It seems this accessory is not part of Cisco's product list ?
Regards

Similar Messages

  • Are there any wall mount brackets for the new iMac 27" 5k?

    I have a wall mount (Bretford) for my Cinema HD Display that I have been using since 2008.  I just purchased the new iMac 27inch 5k computer.  It would be great to be able to use this computer with the wall mount.  The ones that are available (VESA) from the apple store and say they will work with some older iMacs.  My question is are there any available for the iMac I purchased? Thanks.

    Hi. The VESA mounts for the iMacs are not "changeable": either you buy an iMac with a pedestal, either you buy one with a VESA mount, but you cannot switch, because the VESA mount is the first thing built in the iMac. You would need to sell your 5K iMac and buy a VESA 5K iMac.
    iMac (Late 2012 and later): VESA mount compatibility - Apple Support

  • Wall mounting bracket for 20in IMAC G5

    Anyone know what specific model will fit the 20in IMAC to mount on my wall??? and do I need to buy anything other than the bracket...

    Hi Moliver2K9,
    Here's a discussion thread that you might want to join:
    http://discussions.apple.com/thread.jspa?threadID=262230&tstart=0
    Cheers!
    Karl

  • Rrack mounting brackets for Cisco switch SF300-48P ?

    Does anyone know how to get rack mounting brackets for Cisco switch SF300-48P ?

    You might be able to get them through Cisco support.  Check this thread: https://supportforums.cisco.com/discussion/11201291/sf-300-series-rack-mount-brackets

  • Wall Mount Bracket - TouchSmart 610

    I want to wall mount my TouchSmart 610 PC and have found the below link:
    http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02756312/c02756312.pdf
    Where it states:
    Designed for flat-panel displays ranging in size from 508 mm to 582 mm (20 inches to 22.9
    inches) diagonal, and weighing up to 22.7 kg (50 lb)
    My question is, why does the bracket have to support a weight up to 50lbs?  The all in one only weights 26lbs and the brackets that support 50lbs are bigger and much more expensive to buy.....  Can't a bracket that supports say up to 30lbs be sufficient?

    Hello Scooby 2020:
                HP store sells our wall mounts there are three types to choose from.  Just use chat window and ask operator witch one is best one for your computer. Prices very to. You want to check and make sure the bracket holes matches what is on your computer mount holes.  They always over rate the waight of the holder because they do not want it to fall or brake a mount that is why they recomend the stronger mounts.  A 30 LB bracket might brake virus a much stonger bracket at 50 LBs. http://www.shopping.hp.com/en_US/home-office/-/search-SimpleOfferSearch;pgid=c7twGfjc0ptSRpIq7ZUcoGX... You are welcome. If it was my computer I was hanging witch cost almost $1000.00 I would want a strong support to hold it and not some cheep model support. If you do use a 30 lb mount How much money would you loose if it breaks. Your cost of your computer replacement.  frrw

  • Wall mounting bracket.

    DOES ANYBODY KNOW THE SCREW SIZE ON THE BACK OF A 46UL610U LED TV TO MOUNT THE WALL BRACKET TO?  THERE ARE 4 HOLES THAT SAYS TO USE THE SPACERS PROVIDED, BUT I'M HAVING A HARD TIME FINDING THE CORRECT SIZE OF SCREW TO FIT THE THREADS. 

    ClayChicago wrote:
    Peter, you are a genius, I should use the screws that came with my TV wall mounting kit that I purchased 5 years ago and two TV's ago. All we need is the exact specifications for the screws. M8 or M7 or M6 is not enough information. We need to know the exact thread count. Please help.
    Sarcasm will get you all the help you need. Good try.

  • Wall mount solution for AppleTV2?

    I have a plasma hung on a wall in my bedroom and I also have a AppleTV2 connected to it, but it's currently just dangling from the tv wall mount. Are there any wall mounts for the AppleTV2? The only one's I can find online are for the first generation AppleTV. How are others mounting their AppleTV2 to the wall and/or tv on the wall?

    Hello my freind
    I just brought the following and it works great will mount on any surface cut one bit in half
    Velcro 60239 HeavyDuty Stick on Strips 50mmx100mm Black
    Make sure once you stick it to the surface you leave it to bond for 24 hours as the sticky side has to take before you peel the velcro off of each other then you simpley just remove it each time buy pulling it off the velcro fixxing. It is so strong fixxing it will never move you would think it was screwed to the wall not stuck with velcro.
    Also cut two thin strips and put them on each end of the remote and again on the wall, again wait 24 hours for it to bond to the wall.
    This will mount your remote when not using it next to your apple tv 2.
    The strips of velcro honnestly hold items upto 7kg a strip I could not belive it when i tried it , I just thought i would try it and was amazed at the result.
    I forgot to say make sure the spike side of the velcro is on the wall as it seams to be the stronger side so when you remove it it is slightly easyier to remove it still will take some edging to remove as the velcro is also really strong.
    Hope this helps you with a great solution at a cheap price kindest regards Lee

  • Wall Mount cables for phones

    Hello all, I was wondering what kind of cables you use to wall mount your cisco 7911 phones. When we try to use a regular cat 5 cable the RJ 45 end is to big to actually allow the phone to be mounted.

    No we are not. We are just using the wall holes on the phone. We do not require the wall mount kits and prefer not to use them. We also can not use them because a lot of our building have wire mold boxes installed.
    Thanks

  • Mounting Brackets for WLC526

    I ordered a WLC526 for a customer. Howevever, it didn't come with brackets to mount it into a standard 19" rack.
    I called our distributer support. They said that it's intended to be a desktop unit. However, it has screw holes on the side of it.
    Does anyone have a part number for brackets to mount the WLC526 into the rack?
    Thanks,
    Ben

    Thanks alot.
    Those part numbers are actually for the asa, but i hear they will work on the WLC526. The actual part number for the UC500 rack mounts is ACS-UC500RM-19=.
    I found that the "UC500" part number quite a bit less expensive than the ASA part number.
    Thanks,
    Ben

  • Car Mounting Bracket for N82

    As title.
    Any thoughts?
    Thanks

    CR-99.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Where can i find the wall mount for 610 1201

    where can i find the wall mount for 610 1201

    c0rnel wrote:
    Can you give me more descriptions on what a 610 1201 is?
    Monitor? TV? What brand?
    Not having very much luck finding the product you're describing but i'm more than happy to assist you with this.
    I would assume since the OP is posting in the Touchsmart forum they are referring to the Touchsmart 610-1201 computer, no idea why you can't find it, the OP gave all the correct information.
    OP you're probably looking for the #VK554AA adapter, but you will still need an additional VESA wall mount.
    Google for "touchsmart wall mount adapter for vesa wall mount" and you'll see the many sources for this part.

  • Is there a wall mount for Touchsmart 520?

    Hi,
    We just purchased an HP TouchSmart 520 PC. Can anyone tell me if there are wall mount kits available for this model? Thanks!
    Jesse in Pennsylvania

    http://h30434.www3.hp.com/t5/TouchSmart-PC/Wall-mounting-kit-for-Touchsmart-520-1070/td-p/981475
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • EA4500 wall mount options

    Can the EA4500 be wall mounted?
    I don't see any provisions on the underside EA4500 to support securing to a wall.

    Yes I believe it will work best horizontally.  You never know but that might be the reason they didn't provide keyholes for wall mounting, because it might dimish the performance for it to mounted that way.
    I've been wondering if it would work OK upside down on the celing.  Most horizontal wireless routers & AP's seem to be fine with that, sometimes even preferring it.
    And related to that I was wondering if some clever 3rd party would come up with a mounting bracket that the EA4500 or E4200 could slip into.
    For example, the Apple Airport Extreme similarly does not have any keyholes for wall mounting, but a company called H-Squared came up with a $30 plexiglass mounting bracket for it.
    Anyone ever seen anything like this for the new Linksys cases?

  • Qosmio G10-100: Installing second HDD & obtaining mounting bracket

    I'd like to install a second hard drive. Any instructions or general tips on how to do so would be greatly appreciated.
    I'm looking at purchasing a HITACHI T7K500 Desktar 2.5" - 320 GB Interface: SATA 3.0 GB/s serial & ATA Ultra 133 parallel. Is this compatible??
    I need help obtaining a mounting bracket for this upgrade or even information relating to the compatible brackets?
    Thx in advance,

    Thx again the site i was purchasing the drive from (pixmania) had incorrectly labled the Desckstar as 2.5". The travelstar is the one i need, i notice that there is a new 160GTB ATA (parralle) travelstar coming out:
    Hitachi-HGST, Travelstar 5K160 HTS541616J9AT00 0A28419
    Type ATA IDE-Ultra/100
    Capacity 160gb
    Would this be compatible???
    Does anybody know where i can get a nounting bracket for this upgrade??

  • SF 300 Series rack mount brackets

    I have misplaced the rack mount brackets for a SF 300-24P switch. I have searched online to try and find replacements. Anyone have a clue as to were I could find some?

    Dave,
    Please open a case with Cisco Support and they will be able to help you.
    Thanks,
    Ivor

Maybe you are looking for

  • Stop the report from firing until the user clicks the Go button?

    Hi All, Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Other

  • How do I submit netflix ID using Apple TV remote

    How do I submit the Netflix ID using Apple TV remote?

  • Increase mac book air memory storage

    hello  to every one, i got a mac book air running os x mavericks  13 inch and has an HDD of 128giga, is that possible for me to increase the memory or replace the hard disk?

  • Selected photo's folder

    After doing a search for all photos that had no keywords I got a number of photos.  I selected the first one and expected the folder in the left hand panel that contained the photo to be highlighted but it wasn't.  It helps to know which folder the p

  • Graphical screen painter activate 46B

    hi i work in SAP 46B version; i don't find graphical screen painter how  can i  active graphical painter instead  of alphanumeric screen painter ? thinks