Wall mount solution for AppleTV2?

I have a plasma hung on a wall in my bedroom and I also have a AppleTV2 connected to it, but it's currently just dangling from the tv wall mount. Are there any wall mounts for the AppleTV2? The only one's I can find online are for the first generation AppleTV. How are others mounting their AppleTV2 to the wall and/or tv on the wall?

Hello my freind
I just brought the following and it works great will mount on any surface cut one bit in half
Velcro 60239 HeavyDuty Stick on Strips 50mmx100mm Black
Make sure once you stick it to the surface you leave it to bond for 24 hours as the sticky side has to take before you peel the velcro off of each other then you simpley just remove it each time buy pulling it off the velcro fixxing. It is so strong fixxing it will never move you would think it was screwed to the wall not stuck with velcro.
Also cut two thin strips and put them on each end of the remote and again on the wall, again wait 24 hours for it to bond to the wall.
This will mount your remote when not using it next to your apple tv 2.
The strips of velcro honnestly hold items upto 7kg a strip I could not belive it when i tried it , I just thought i would try it and was amazed at the result.
I forgot to say make sure the spike side of the velcro is on the wall as it seams to be the stronger side so when you remove it it is slightly easyier to remove it still will take some edging to remove as the velcro is also really strong.
Hope this helps you with a great solution at a cheap price kindest regards Lee

Similar Messages

  • Are there any wall mount brackets for the new iMac 27" 5k?

    I have a wall mount (Bretford) for my Cinema HD Display that I have been using since 2008.  I just purchased the new iMac 27inch 5k computer.  It would be great to be able to use this computer with the wall mount.  The ones that are available (VESA) from the apple store and say they will work with some older iMacs.  My question is are there any available for the iMac I purchased? Thanks.

    Hi. The VESA mounts for the iMacs are not "changeable": either you buy an iMac with a pedestal, either you buy one with a VESA mount, but you cannot switch, because the VESA mount is the first thing built in the iMac. You would need to sell your 5K iMac and buy a VESA 5K iMac.
    iMac (Late 2012 and later): VESA mount compatibility - Apple Support

  • Wall mount bracket for AIR-ANT5160V-R

    Hi all,
    I am looking for a wall mount bracket reference, for these 2 models of antennas :
    - AIR-ANT5160V-R
    - AIR-ANT2506
    Something like that :
    I was not able to find any reference in cisco product list. Does anyone have an idea ?
    Thank you

    Hi Scott,
    Thanks for your reply.
    The picture I am showing is an example of what I have seen.
    I am going to deploy lots of wireless sites, that's why I am looking for a reference of wall mount bracket I could buy to deploy easily the outdoor antennas.
    It seems this accessory is not part of Cisco's product list ?
    Regards

  • Wall Mount cables for phones

    Hello all, I was wondering what kind of cables you use to wall mount your cisco 7911 phones. When we try to use a regular cat 5 cable the RJ 45 end is to big to actually allow the phone to be mounted.

    No we are not. We are just using the wall holes on the phone. We do not require the wall mount kits and prefer not to use them. We also can not use them because a lot of our building have wire mold boxes installed.
    Thanks

  • Wall mounting bracket for 20in IMAC G5

    Anyone know what specific model will fit the 20in IMAC to mount on my wall??? and do I need to buy anything other than the bracket...

    Hi Moliver2K9,
    Here's a discussion thread that you might want to join:
    http://discussions.apple.com/thread.jspa?threadID=262230&tstart=0
    Cheers!
    Karl

  • Is there a wall mount for Touchsmart 520?

    Hi,
    We just purchased an HP TouchSmart 520 PC. Can anyone tell me if there are wall mount kits available for this model? Thanks!
    Jesse in Pennsylvania

    http://h30434.www3.hp.com/t5/TouchSmart-PC/Wall-mounting-kit-for-Touchsmart-520-1070/td-p/981475
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Where can i find the wall mount for 610 1201

    where can i find the wall mount for 610 1201

    c0rnel wrote:
    Can you give me more descriptions on what a 610 1201 is?
    Monitor? TV? What brand?
    Not having very much luck finding the product you're describing but i'm more than happy to assist you with this.
    I would assume since the OP is posting in the Touchsmart forum they are referring to the Touchsmart 610-1201 computer, no idea why you can't find it, the OP gave all the correct information.
    OP you're probably looking for the #VK554AA adapter, but you will still need an additional VESA wall mount.
    Google for "touchsmart wall mount adapter for vesa wall mount" and you'll see the many sources for this part.

  • An elegant wall mount for an elegant iMac 21.5

    I am buying an iMac 21.5 and I need to mount it on a wall. There are a lot of solutions on the market for the iMac 27 but not for the 21.5. I am looking for a wall mount arm that allow me to pull (horizontally) the screen from the wall (24" or more), to move it up and down, right and left. Do you have any suggestions?

    Thankyou
    But, here
    http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    it doesn't make differences between models.. It seems that ANY iMac with thunderbolt can serve as a target monitor to any computer with thunderbolt...

  • Secure wall mount for iPad?

    Hi...
    I will be displaying iPad drawings in an art show.
    I need to wall mount my iPad securely.
    Not so much against gravity as theft...    :-)
    Does anyone have experience with specific products you could recommend for use in this sort of environment?
    Kinda like a commercial kiosk use, with buttons covered, in view-only mode.
    Thanks in advance for any time you might have for a reply,
           Tom

    I am using their products for my Macbook and I am loving it (highly recommended BTW) so I will natuarally recommend the rest of their stuff.
    I searched for wall mounts on the site and think you'll be able to find whatever you need there.
    http://www.maclocks.com/catalogsearch/result/?q=ipad+wall+mount&x=0&y=0
    http://www.maclocks.com/catalogsearch/result/?q=ipad+swing+&x=0&y=0
    Solutions for all iPads .

  • Wall Mount for 420t Touchsmart

    We have not been able to find a wall mount for the 420t Touchsmart. Has anyone been able to mount this model? If so, where did you get the mounting hardware?
    We have found HP literature that says it is possible, but HP support does not know where to buy it.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03005191&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_ca...
    Thanks!

    Hi,
    Thousands of mounting gears around. You can find them everywhere or you can order them online. I don't know where do you live. My next door shop can supply it for you. Here it is:
       http://www.selbyacoustics.com.au/storefrontprofiles/deluxeSFshop.aspx?sid=1&sfid=74520&c=84142
    (under Brackets).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Wall Mount for a 23" (Clear enclosure) Apple LCD Monitor

    I've been scouring the net, looking for wall/desk mounting options (like an articulated arm, or even a bracket just to mount it to the wall) for my 23" Apple cinema - NOT THE NEW METAL ONE - the older, clear plastic enclosure type...
    The only thing I can find is like $350! Is there anything cheaper out there? I've found the articulating arms, but nothing that mounts to the wall. (Except for Marathon - which is now out of business...)
    Help!

    Hello? Anyone? Yikes....

  • Does anyone know is there's a wall mount for iPad that incorporates a speaker system ?

    Does anyone know is there's a wall mount for iPad that incorporates a speaker system ?

    I don't think that's happened, nor is it likely to happen any time soon. Take a look at the discussion here:
    http://discussions.apple.com/message.jspa?messageID=1925938

  • I have a touchsmart 310 and am looking for a wall mount. What type do I need?

    I currently have a TouchSmart 310 and am looking for a wall mount.  Every site I check only seems to have the adapter for the 310, but the entire kit for the 600 and 9100 series.  I am unsure what to purchase.  Please help.

    Have you looked at the http://www.iversal.com adapter? you just use that and any standard VESA wall mount with it.

  • Need a wall mount for 40RV700A / 40CV700A

    My son has this TV; it seems the way the warranty is worded, only a Toshiba approved wall-mount can be fitted to the TV, but Toshiba does not list any approved wall mount for this model, which leaves us stuck.

    Hi
    As far as I know you can use an wall mount from different manufacturers which meets the VESA (Video Electronics Standards Association) standards.
    I googled a little bit and the TV weight without the stand is 16.5kg (with stand 18.5kg)
    So you should ensure that the wall mount would support this weight.

  • Wall mount for DMRW1000

    happy and confident with DMC250, DMRW1000 en NMH410.
    former wireless home audio was Philips Streamium, Linksys is much much better
    when will wall mount with battery charging function for DMRW1000 be available in Europe?
    Gr, Jules.

    Hi Jules,
    I have not heard of this being an option as of yet the unit charges via it's connector and no wall mount has been made as of yet.  This is a great suggestion and I shall pass this along.
    Thank you,
    HAL9000

Maybe you are looking for

  • Multiple OutputStreams to a single socket

    Hi, I searched the forums but could not find an answer for this. I have a socket between a server and a client and am already using an output stream to send information via this output stream. Now, I want to use another thread and another output stre

  • FBL3N....missing tax codes.

    Hi all, in FBL3N report of G/L account Line  Item Display, in the column of tax code, there are some document nos against which no tax code is showing up. I selected the "All Items" option at startup of the transaction with the G/L Account no. What c

  • File Upload and Email

    Hi, I need to send an email to myself when a user uploads onto my site. But its not working: <form enctype="multipart/form-data" action="<?php echo $_SERVER["PHP_SELF"]; ?>" method="post"> <p> <input type="hidden" name="MAX_FILE_SIZE" value="20480000

  • Transfer of Stock from Warehouse to Warehouse

    Hi , I have the following query. Warehouse 1 is assigned to Plant 100 and Storage location 10. But now the client wants to assign Warehouse 2 to Plant 100 and Storage location 10. As per the requirement I changed the assignment. But now I have come t

  • ESPN360...Why Can't it Be Used on Safari?

    Any help on this would be appreciated. Error Message says ESPN 360 can only be viewed on IE.