Wall mounting and TV

I have 2 questions regarding the Imac G5
Can it be wall mounted?
Is there a way to watch TV through the mac? I had a friend who was able to do this on a PC with a TV tunner or other.
Anyways, it would be great to be able to do this as I have very limited room

Absolutely, I am thinking of doing this too. There is a wall mount in the Apple Store, online, for $29.00 USD. It is made specifically for iMac G5.....
Here is the link-
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/72404/wo/2S1lssT 20aKb3UKukVd1R9g6Tb4/2.SLID?mco=7CAE1DEC&nplm=M9755G%2FA

Similar Messages

Cinema VESA wall mount and original iMac G5?

This has probably been asked before, but does the Cinema VESA wall mount like this one:
http://www.macconnection.com/ProductDetail?Sku=5202648
Work with the iMac G5 1.8 Ghz original model? Or is only the original wall mount that came out when that iMac came out able to work with it?

I was hoping to find something on this forum about locating the VESA adapter kit for the G5 iMac and your thread is all there is . Every on-line retailer that shows them in stock actually have none (I called 5 different ones...Why can't they update websites?!?!)
Did you have any luck finding one. I am moving into a smaller studio and I desperately need to mount my 17-inch iMac. I can't find anyone anywhere! I even called the Apple store number listed on the website and the guy on the phone acted like he had no clue how to even search to see if Apple had any and his response was, "AppleCare would probably be able to help you out more than I could.." Sure enough I got transfered to a dead-end and after 20 minutes I hung up the phone!
What happen to all of the VESA mounts they had. I swear like 3 months ago they were selling them in the on-line store! What does Apple do with all of them? Trash them?
Anyways, please let me know if you were successful. So far I am getting no where

Wall mounting and stand for wrt600n?

Hi all, I was wondering if the wrt600n can be wall mounted? i can't find any holes like on most other routers, so am I out of luck? Also, the website shows it sitting on a stand so it can be placed vertically on a table, but mine came with no such stand. I am missing something or is this normal. Is there a way to have it stand vertically? I appreciate the help. Paul

thanks everyone for the responses. yea, i think i am just going to jerry-rig something and make it work. i tried contacting linksys and boy was that a waste of time. i got people who couldn't speak english and wasted my time. thanks again and take it easy.

6921 Wall Mount - The Clip to keep the phone on hook keeps falling out!!

Has anyone experienced this issue with the 6921 on-hook clips. We turn the clip around when the phone is wall mounted and it hold the phone in. But it comes out so easily, as soon as you lift the handset out it pulls the clips out!!! we have like 30 - 6921 phones that have done this. I need to know if its possible to get spare 6921 clips, because we need them, anyone have an info on this? Thanks

no, All the vendors I talked with say the phone is too new and not worth the money to fabricate yet. Not enough call for them.

Where can i find the wall mount for 610 1201

where can i find the wall mount for 610 1201

c0rnel wrote:
Can you give me more descriptions on what a 610 1201 is?
Monitor? TV? What brand?
Not having very much luck finding the product you're describing but i'm more than happy to assist you with this.
I would assume since the OP is posting in the Touchsmart forum they are referring to the Touchsmart 610-1201 computer, no idea why you can't find it, the OP gave all the correct information.
OP you're probably looking for the #VK554AA adapter, but you will still need an additional VESA wall mount.
Google for "touchsmart wall mount adapter for vesa wall mount" and you'll see the many sources for this part.

Wall mount new iMac

Hi
I was already to buy one of these and then I have read that it is not possible to wall mount the iMac. Is this true? Is there no way of wall mounting and is there ever likely to be?
If it is true that you can not wall mount it I wonder how many sales Apple are losing?
Thanks

Mike
Thanks. Tracked it down and ordered one yesterday. But they keep it well hidden. The only way to find it is using Google, which is ironic! In case anybody else from the UK reads this post the link is
http://store.apple.com/uk/browse/home/shop_mac/family/imac_vesa
Cant wait to get my hands on my first Apple computer apart from the iPad!
Thanks agian for all you help.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

My iPod Classic is stuck in disk mode, won't charge on a wall mount, iTunes won't recognize it, and it got this way from me trying to restore it like it said. What do I do now?

So, I tried to restore my iPod to the factory settings via iTunes. It has been a few days now and its still stuck in disk mode telling me "Do Not Disconnect" and it only charges on my laptop. I tried hooking it up to a wall mount to charge and than it told me that I need to use iTunes to restore it. Here's the thing, it won't leave disk mode and its not registering on my iTunes. What can I do to get it back to normal,
Oh yeah, all of the latest updates for my software and iTunes are current.

Mee too!
That's my SMART DATA results:
Retracts: 134
Reallocs: 351
Pending Sectors: 1
Start/Stops: 124
Temp: Cur 35c
min 19c
mac 47c
What can we do?
Change HD?
I also tried to restore it in the DFU mode, but still rebboting in disk mode!!!

I have a touchsmart 310 and am looking for a wall mount. What type do I need?

I currently have a TouchSmart 310 and am looking for a wall mount. Every site I check only seems to have the adapter for the 310, but the entire kit for the 600 and 9100 series. I am unsure what to purchase. Please help.

Have you looked at the http://www.iversal.com adapter? you just use that and any standard VESA wall mount with it.

Wall mounting Apple Studio Display 17" M7649

I have a recording booth and am using the Apple Studio Display 17" M7649 as a display for copy. Currently is sits on a shelf. I need to get rid of the shelf due to echoing.
Is it possible to wall mount this monitor...if so ...How?
Thanks,
Antny

Sometimes those ports just die. Wouldn't be the first time.
Other times, it is the ADC connector that is the issue.
Try replugging the ADC connector.

Intel 24" iMAC wall mount

Hey all I hope this isn't a topic that has been pounded on a lot (my forum search didn't turn much up), but I am trying to find a wall mount for my iMAC and thought this would be the best place to ask.
Thanks,
-Stephen

The 24" iMacs can use any standard VESA mount (used for computer monitors and TVs). You can find them at various computer and office supply stores. There's a very wide range of models available. I don't have a particular preference.

WCS does not support wall mount orientation of 1131 & 1000 APs w/int. ant.

I have been unable to determine how to indicate wall mount orientation of APs in the WLC for the 1000 series (AireSpace) and 1131AG series access points.
I can set the rotational direction they are pointing if ceiling mounted , but cannot indicate if they are located on the wall or ceiling.
I am assuming a ceiling mount configuration is all that is supported in the WCS.
As an aside, when attempting to correctly orient the antenna direction on the 1000 series AP, the diagram used on the WCS to indicate the orientation of "0 degrees" mark on the access point shows an AP as if it were sitting on a table (an invalid orientation - wall & ceiling are the recommended orientations). This means that you have to mentally "flip" the controller over to account for ceiling mount and then determine which way the arrow should be pointed on the WCS map - not much fun.
Any suggestions for dealing with wall-mounted orientation? Have I missed something?
For ceiling mount installations, how critical is it that the antennae orientation be configured on 1131AG and 1000 series models?
For wall mount, I would imagine that for determining location and RF planning that the wall mount / ceiling mount orientation would have a significant affect, yet I cannot seem to find any way to set this orientation.
- John

I have been unable to determine how to indicate wall mount orientation of APs in the WLC for the 1000 series (AireSpace) and 1131AG series access points.
I can set the rotational direction they are pointing if ceiling mounted , but cannot indicate if they are located on the wall or ceiling.
I am assuming a ceiling mount configuration is all that is supported in the WCS.
As an aside, when attempting to correctly orient the antenna direction on the 1000 series AP, the diagram used on the WCS to indicate the orientation of "0 degrees" mark on the access point shows an AP as if it were sitting on a table (an invalid orientation - wall & ceiling are the recommended orientations). This means that you have to mentally "flip" the controller over to account for ceiling mount and then determine which way the arrow should be pointed on the WCS map - not much fun.
Any suggestions for dealing with wall-mounted orientation? Have I missed something?
For ceiling mount installations, how critical is it that the antennae orientation be configured on 1131AG and 1000 series models?
For wall mount, I would imagine that for determining location and RF planning that the wall mount / ceiling mount orientation would have a significant affect, yet I cannot seem to find any way to set this orientation.
- John

Is it okay to "wall-mount" an Airport Time Capsule sideways?

Just bought a new Airport Time Capsule to replace an older "flying saucer" Airport Express. Is it okay to mount the ATC sideways? My main concern is the internal HD. is there a problem with an HD spinning sideways over an extended period of time? Any other reason I should not mount it sideways?
A bit more explanation (only if you are wondering why I need to mount it sideways):
I need to mount the ATC on a wall because placing it in the hallway is the only way I get full signal strength throughout my apartment (old building with thick walls and lots of corners). I am using the old AE mounting bracket with zip ties, at least until I can determine a better way and/or location. Sideways mount determined by how the mount works and how the wiring is fed into the unit. I guess Apple decided that users would simply put these things on their desks or bookshelves.
Thanks in advance!

Thanks Bob, I just got off the phone with Applecare, and they said for optimal signal strength, the unit should be mounted upright. But I was told if I am getting a good signal as set up, there's no reason to change it since there is no risk to the HD.
Regarding airflow—good point. I did take that into consideration. The vents appear to be on the bottom of the unit, so mounting the unit sideways leaves that surface completely open. So I don't think airflow would be impeded. Here, I am making an assumption about how the engineers intended the ATC to work. When I have the time, I'll build a small shelf to wall mount the unit in it's upright position.
Thanks—this is the type of info I am looking for. I'd like the unit to last a while before I have to replace it.

What wall mount for 24"iMac?

Anyone mount their 24" iMac to the wall? What wall mount did you use? I'm looking at the Ergotron 400 series due to the weight of the iMac. I really like the Ergotron LX series but it does not have the capacity to hold the 24" iMac. What are you using to mount it to the wall? Any suggestions would be appreciated. I do need a mount that both retracts and lifts/lowers. Thanks!
Bob

Hi
I have wall mounted my 24" iMac using the apple amount and a fixed bracket from an LCD retailer, but my 20" cinema display is on a desktop gas arm bracket which connects to the edge of my desk. I got this from PC World.
I didn't want my iMac on an arm due to the moving components in the machine.
Hope this helps?

Wall mount for IMAC

Hej
i was going to by a imac ,and hang it on the wall but???
the imac G5 vesa wall mount dose not fit ,the new Imac
what can i do??
is it possible to by any wall thing!!??
thanks Søren

Sorry, but unlike the first two iMac G5 versions, the preceeding models (iSight, Intel CD) are not VESA compliant and the stand cannot be removed in order to accommodate a wall mount or an articulating arm.
In my opinion, this is something that Apple should have kept throughout all its iMac models. Such a shame to have that all in one setup and not be able to mount it on a wall---where it would be perfect.
So now I have an iMac G5 (ALS) mounted on the wall and an intel CD that has to remain on its stand. Too bad, they would have looked awesome up on the wall together!

Wall mounting and TV

Similar Messages

Maybe you are looking for