Wall mounting bracket.

DOES ANYBODY KNOW THE SCREW SIZE ON THE BACK OF A 46UL610U LED TV TO MOUNT THE WALL BRACKET TO?  THERE ARE 4 HOLES THAT SAYS TO USE THE SPACERS PROVIDED, BUT I'M HAVING A HARD TIME FINDING THE CORRECT SIZE OF SCREW TO FIT THE THREADS. 

ClayChicago wrote:
Peter, you are a genius, I should use the screws that came with my TV wall mounting kit that I purchased 5 years ago and two TV's ago. All we need is the exact specifications for the screws. M8 or M7 or M6 is not enough information. We need to know the exact thread count. Please help.
Sarcasm will get you all the help you need. Good try.

Similar Messages

  • Wall mount bracket for AIR-ANT5160V-R

    Hi all,
    I am looking for a wall mount bracket reference, for these 2 models of antennas :
    - AIR-ANT5160V-R
    - AIR-ANT2506
    Something like that :
    I was not able to find any reference in cisco product list. Does anyone have an idea ?
    Thank you

    Hi Scott,
    Thanks for your reply.
    The picture I am showing is an example of what I have seen.
    I am going to deploy lots of wireless sites, that's why I am looking for a reference of wall mount bracket I could buy to deploy easily the outdoor antennas.
    It seems this accessory is not part of Cisco's product list ?
    Regards

  • Wall Mount Bracket - TouchSmart 610

    I want to wall mount my TouchSmart 610 PC and have found the below link:
    http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02756312/c02756312.pdf
    Where it states:
    Designed for flat-panel displays ranging in size from 508 mm to 582 mm (20 inches to 22.9
    inches) diagonal, and weighing up to 22.7 kg (50 lb)
    My question is, why does the bracket have to support a weight up to 50lbs?  The all in one only weights 26lbs and the brackets that support 50lbs are bigger and much more expensive to buy.....  Can't a bracket that supports say up to 30lbs be sufficient?

    Hello Scooby 2020:
                HP store sells our wall mounts there are three types to choose from.  Just use chat window and ask operator witch one is best one for your computer. Prices very to. You want to check and make sure the bracket holes matches what is on your computer mount holes.  They always over rate the waight of the holder because they do not want it to fall or brake a mount that is why they recomend the stronger mounts.  A 30 LB bracket might brake virus a much stonger bracket at 50 LBs. http://www.shopping.hp.com/en_US/home-office/-/search-SimpleOfferSearch;pgid=c7twGfjc0ptSRpIq7ZUcoGX... You are welcome. If it was my computer I was hanging witch cost almost $1000.00 I would want a strong support to hold it and not some cheep model support. If you do use a 30 lb mount How much money would you loose if it breaks. Your cost of your computer replacement.  frrw

  • Are there any wall mount brackets for the new iMac 27" 5k?

    I have a wall mount (Bretford) for my Cinema HD Display that I have been using since 2008.  I just purchased the new iMac 27inch 5k computer.  It would be great to be able to use this computer with the wall mount.  The ones that are available (VESA) from the apple store and say they will work with some older iMacs.  My question is are there any available for the iMac I purchased? Thanks.

    Hi. The VESA mounts for the iMacs are not "changeable": either you buy an iMac with a pedestal, either you buy one with a VESA mount, but you cannot switch, because the VESA mount is the first thing built in the iMac. You would need to sell your 5K iMac and buy a VESA 5K iMac.
    iMac (Late 2012 and later): VESA mount compatibility - Apple Support

  • Wall mounting bracket for 20in IMAC G5

    Anyone know what specific model will fit the 20in IMAC to mount on my wall??? and do I need to buy anything other than the bracket...

    Hi Moliver2K9,
    Here's a discussion thread that you might want to join:
    http://discussions.apple.com/thread.jspa?threadID=262230&tstart=0
    Cheers!
    Karl

  • Is it okay to "wall-mount" an Airport Time Capsule sideways?

    Just bought a new Airport Time Capsule to replace an older "flying saucer" Airport Express. Is it okay to mount the ATC sideways? My main concern is the internal HD. is there a problem with an HD spinning sideways over an extended period of time? Any other reason I should not mount it sideways?
    A bit more explanation (only if you are wondering why I need to mount it sideways):
    I need to mount the ATC on a wall because placing it in the hallway is the only way I get full signal strength throughout my apartment (old building with thick walls and lots of corners). I am using the old AE mounting bracket with zip ties, at least until I can determine a better way and/or location. Sideways mount determined by how the mount works and how the wiring is fed into the unit. I guess Apple decided that users would simply put these things on their desks or bookshelves.
    Thanks in advance!

    Thanks Bob, I just got off the phone with Applecare, and they said for optimal signal strength, the unit should be mounted upright. But I was told if I am getting a good signal as set up, there's no reason to change it since there is no risk to the HD.
    Regarding airflow—good point. I did take that into consideration. The vents appear to be on the bottom of the unit, so mounting the unit sideways leaves that surface completely open. So I don't think airflow would be impeded. Here, I am making an assumption about how the engineers intended the ATC to work. When I have the time, I'll build a small shelf to wall mount the unit in it's upright position.
    Thanks—this is the type of info I am looking for. I'd like the unit to last a while before I have to replace it.

  • What wall mount for 24"iMac?

    Anyone mount their 24" iMac to the wall? What wall mount did you use? I'm looking at the Ergotron 400 series due to the weight of the iMac. I really like the Ergotron LX series but it does not have the capacity to hold the 24" iMac. What are you using to mount it to the wall? Any suggestions would be appreciated. I do need a mount that both retracts and lifts/lowers. Thanks!
    Bob

    Hi
    I have wall mounted my 24" iMac using the apple amount and a fixed bracket from an LCD retailer, but my 20" cinema display is on a desktop gas arm bracket which connects to the edge of my desk. I got this from PC World.
    I didn't want my iMac on an arm due to the moving components in the machine.
    Hope this helps?

  • How to wall mount imac 20 inch intel? Any body has tried

    How to wall mount imac 20 inch intel? Any body has tried

    The iMac 20" doesn't have a VESA-type mounting bracket on the back (the 24" one does). If you're brave and have the white plastic model, you can try [adapting an old iMac G5 mount kit|http://www.wikiela.com/wiki/Howto_wall_mount_a_Core_2_Duo_Intel_iMac_20_or17].
    For other models, you can use the VESA adapter from [www.imacmount.com]. These are adapters that clamp a VESA-style mount bracket to the aluminum pedestal stand for the iMac. You can then attach the iMac (pedestal and all) to any VESA-compatible mount. Here's a picture of an 20" white iMac fastened to a wall using this method (same works for newer aluminum iMacs and the white 17" ones too):
    !http://www.imacmount.com/sitebuilder/images/imacmount2-760x600.jpg!

  • IMac Wall Mount?

    Does anyone know what, if any, options are available for wall-mounting the new iMac (Intel Dual Core)? I recall the old G5 iMac had such a wall-mounting option, but in checking various reviews in the Apple Store, I noticed a few comments suggesting that such options might have recently been phased out. Whatayathink? Thanks.
    iMac 2 GHz (Intel Dual Core)   Mac OS X (10.4.2)  

    This has been discussed previously, and the answer is no.
    The problem is the foot, as it is not removable - at least not without a lot of work & violating your warranty. And even then you are left with the problem of attaching the mount to the back of the iMac.
    There are some wall/desk mounts that has a tray for the monitor to sit on - we have them at work. Some have brackets to secure the base of the monitor to the stand.
    One other wild suggestion is to literally cut off the foot & devise a bracket to attach the left over portion of the foot to the mount. This also may void your warranty. This is one option I have been kicking around since I got my Intel iMac.
    Steve

  • Wall Mount for 420t Touchsmart

    We have not been able to find a wall mount for the 420t Touchsmart. Has anyone been able to mount this model? If so, where did you get the mounting hardware?
    We have found HP literature that says it is possible, but HP support does not know where to buy it.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03005191&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_ca...
    Thanks!

    Hi,
    Thousands of mounting gears around. You can find them everywhere or you can order them online. I don't know where do you live. My next door shop can supply it for you. Here it is:
       http://www.selbyacoustics.com.au/storefrontprofiles/deluxeSFshop.aspx?sid=1&sfid=74520&c=84142
    (under Brackets).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • EA4500 wall mount options

    Can the EA4500 be wall mounted?
    I don't see any provisions on the underside EA4500 to support securing to a wall.

    Yes I believe it will work best horizontally.  You never know but that might be the reason they didn't provide keyholes for wall mounting, because it might dimish the performance for it to mounted that way.
    I've been wondering if it would work OK upside down on the celing.  Most horizontal wireless routers & AP's seem to be fine with that, sometimes even preferring it.
    And related to that I was wondering if some clever 3rd party would come up with a mounting bracket that the EA4500 or E4200 could slip into.
    For example, the Apple Airport Extreme similarly does not have any keyholes for wall mounting, but a company called H-Squared came up with a $30 plexiglass mounting bracket for it.
    Anyone ever seen anything like this for the new Linksys cases?

  • As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

    As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
    Do you think this product is possible?

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

  • My iPod Classic is stuck in disk mode, won't charge on a wall mount, iTunes won't recognize it, and it got this way from me trying to restore it like it said. What do I do now?

    So, I tried to restore my iPod to the factory settings via iTunes. It has been a few days now and its still stuck in disk mode telling me "Do Not Disconnect" and it only charges on my laptop. I tried hooking it up to a wall mount to charge and than it told me that I need to use iTunes to restore it. Here's the thing, it won't leave disk mode and its not registering on my iTunes. What can I do to get it back to normal,
    Oh yeah, all of the latest updates for my software and iTunes are current.

    Mee too!
    That's my SMART DATA results:
    Retracts: 134
    Reallocs: 351
    Pending Sectors: 1
    Start/Stops: 124
    Temp: Cur 35c
              min 19c
              mac 47c
    What can we do?
    Change HD?
    I also tried to restore it in the DFU mode, but still rebboting in disk mode!!!

  • Qosmio G10-100: Installing second HDD & obtaining mounting bracket

    I'd like to install a second hard drive. Any instructions or general tips on how to do so would be greatly appreciated.
    I'm looking at purchasing a HITACHI T7K500 Desktar 2.5" - 320 GB Interface: SATA 3.0 GB/s serial & ATA Ultra 133 parallel. Is this compatible??
    I need help obtaining a mounting bracket for this upgrade or even information relating to the compatible brackets?
    Thx in advance,

    Thx again the site i was purchasing the drive from (pixmania) had incorrectly labled the Desckstar as 2.5". The travelstar is the one i need, i notice that there is a new 160GTB ATA (parralle) travelstar coming out:
    Hitachi-HGST, Travelstar 5K160 HTS541616J9AT00 0A28419
    Type ATA IDE-Ultra/100
    Capacity 160gb
    Would this be compatible???
    Does anybody know where i can get a nounting bracket for this upgrade??

  • 6921 Wall Mount - The Clip to keep the phone on hook keeps falling out!!

    Has anyone experienced this issue with the 6921 on-hook clips.  We turn the clip around when the phone is wall mounted and it hold the phone in.  But it comes out so easily, as soon as you lift the handset out it pulls the clips out!!! we have like 30 - 6921 phones that have done this.  I need to know if its possible to get spare 6921 clips, because we need them, anyone have an info on this?  Thanks

    no, All the vendors I talked with say the phone is too new and not worth the money to fabricate yet. Not enough call for them.

Maybe you are looking for