Wallet password modification

I am trying to figure out how to modify Oracle Wallet password from command line (mkstore). It is possible to modify the password from OWM GUI.. but I have not found any way how to do it from the command line. Just for clarity - I am not talking about individual credentials (-modifyCredential), I just want to change password on the Wallet level (e.g. wallet without any credentials just containing third party certificates for validation of https callouts via utl_http.request..
Any ideas?
Pavel

Pavel.Ruzicka wrote:
This is 10g R2. Simple workaround for me is to use the GUI. I was just surprised that there is no direct equivalent on mkstore level (parameter/switch). Thanks anyway.
Regards,
Pavelhttp://www.stanford.edu/dept/itss/docs/oracle/10g/network.101/b10772/asowalet.htm#1006854

Similar Messages

Default Wallet Password in 10g R3

Does anyone know what the default wallet password is in 10g R3, I have tried changeit but this doesn't work.
The wallet is located at D:\App\Oracle\as\1013\opmn\conf\ssl.wlt\default

Hi,
Try 'welcome'.
This works for the default wallet in the 9.0.4 release.
HTH,
Jim

AIP-16076: A wallet password is required for hosted trading partner Oracle

Hi,
I have defined a agreement under "Custom Document over Generic Exchange" using File transport protocol.
I have configured host and remote tp delivery channels with following setup
i) Encryption Enabled
ii)Non-repudiation-origin enabled
iii)Non-repudiation-receipt enabled
I have created digital certificate using Oracle Wallet Manger application and saved them in B2B file system.
I have browsed and uploaded digital certificates to B2B during delivery channel creation.
After completing everything and when I validate the agreement, it throws following error
AIP-16076: A wallet password is required for hosted trading partner Oracle
Where I am doing wrong ?
Should I copy certificates to a specified path ?
Thanks
-Praveen

HI,
I got it now.
We have to set Host TP wallet password in General section Host TP B2B UI
Thanks

AIP-16076: A wallet password is required for hosted trading partner

Hi Please help me to resolve this issue.
B2B version: 10.1.2.2
OS: AIX 5.3
Error
Agreement XYZ is invalid.
AIP-16076: A wallet password is required for hosted trading partner ABC in agreement XYZ.
I did create the wallet, imported TD certificate and created wallet.txt and changed the "tip.properties"
Restarted B2B.
I did provide password 'welcome' when I create "Transport Servers". Is there any part I am missing. Please help with info to resolve this issue. It's bit important.
Thanks !
Rama K

Hi Guys,
Thanks for quick reply.
Here I am experiencing one more isssue. Please let me know, if you have quick ans for this issue.
<MSG_TEXT>Error -: AIP-51085: General failure encrypting S/MIME message: Error -: AIP-51091: Adding recipient to S/MIME message recipient list failed : Error -: AIP-51162: invalid asn.1 tag.
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createEncryptedMimeBodyPart(MimePackaging.java:513)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1697)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1165)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:701)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:832)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:531)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java(Compiled Code))
at java.lang.Thread.run(Thread.java:568)
Caused by: Error -: AIP-51091: Adding recipient to S/MIME message recipient list failed : Error -: AIP-51162: invalid asn.1 tag.
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.encrypt(SmimeSecureMessaging.java:1242)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createEncryptedMimeBodyPart(MimePackaging.java:485)
... 9 more
Caused by: Error -: AIP-51162: invalid asn.1 tag.
Thanks in Advance,
Rama K

Change Wallet password via sqlplus

Is there a way to change the wallet password through SQLPlus? I can't find any documentation for changing the password in this way. I created the wallet and password using this command:
alter system set wallet open identified by "password1";
I don't want to use Wallet manager or orapki because there is a bug with them for 11.2.0.1 in which is corrupts your wallet. The solution is to upgrade to 11.2.0.2 but I am not ready for that yet.
Doc 1301365.1 point #3
BUG 9215461

We are running into the same issue. We are on 11.2.0.1 on linux x86-64. We were intending to implement TDE, but found out the known limitations with TDE on 11.2.0.1 were too extreme to feel comfortable enabling this (see Known TDE Wallet Issues [ID 1301365.1]). We also need to update to 11.2.0.2, but because we have a Grid infrastructure and 4-node cluster, the downtime would be extreme to perform the patching. We have a ticket open with oracle to provide patches on 11.2.0.1, but there is no ETA.
There are a few patches that address the ability to recreate the wallet, however applying these patches, caused me to run into the wallet corruption issue where OWM and orapki no longer recognize the password, even though that same password can close and open the wallet correctly from sqlplus.
So at the moment, we are dead in the water on enabling TDE due to these limitations. Our options are to update to 11.2.0.2, or wait for the 11.2.0.1 patches.

How to grab each password-modification?

HI everbody,
I have the following requirement: for security reasons each password must not be stored in the IdM but only in an Active-Directory. User-logins to IdM can use pass-through-authentication, so that's currently no big problem.
However, we would like to grab the password in clear, encrypt it with a public key and store it in some database. The private-key is to be kept on an encrypted storage, locked away safely in a vault.
So besides disabling password-storage in IdM (that will be a later question) I have to grab each password, on creation and on update.
I tried something simple, a rule decrypting "waveset.password" and encrypting it with a public key. A database set to "no password", to columns, one as key and one managed. The database-resource put in an IT-role with my rule overriding the value of the managed column. Works fine when the resource is assigned, but misses all password-updates.
If I unset "no password" I have to define a password-column where the password is stored unencrypted and see no way to override the value with my rule.
Hmmmmm. Seemed to be a nice solution at first....
I could write a larger java-function, encrypting a clear password and storing it in a database in one go, but face two problems. Retries would be difficult if the database is unavailable, and I'm not sure where to grab the password.
Probably I'd have to modifie the "Password Library"? Or is there a workflow I could insert an activity into?
Any hints would be greatly appreciated.
CU,
Patrick.

You should modify the "Change User Password" workflow and probably the "Create User" and "Update User" workflows as well, inserting your activity there. I suppose it should be able to write the actual password to your database and set the IDM password to something else. I don't know however whether it is possible to entirely disable password-storage in IDM.

Changing Oracle wallet password

Hello,
I have to just change password for my oracle wallet not the encryption key and its a 2 node RAC 10g.
I followed the below steps using OWM.
1) Opened the wallet
2) Wallet >> Change Password
I did the above steps on one node, do i need to do the same thing on other node also or doing it on any one node is sufficient in a RAC database.

HI!
Do you really read this?
925967 wrote:
http://www.oracle.com/technetwork/database/focus-areas/security/twp-transparent-data-encryption-bes-130696.pdf
Once TDE is enabled on
the first instance, the wallet and the local sqlnet.ora file need to be copied to all other
instances and manually opened for the master key to be loaded into each instance’s memory.
Likewise, when the master encryption key is rekeyed on one instance, the wallet needs to be
copied to all other instances in this cluster; close the wallet to remove the old master key from
memory and open it again to load the new master key. Oracle does not support sharing the
same Oracle Wallet between RAC instances, since the wallet may become corrupted when one
instance re-keys the master key without properly updating the other instances.

Instance Settings: Wallet path and wallet password

What is the purpose of the wallet settings in the instance settings for apex if you are using the modplsql instead of the XDB http server. Do you still need to set the wallet if you are doing ssl and the oracle app server with modplsql.

Am I understanding correctly that if I select "Replace the default Microsoft template" in my GPO that ONLY my custom templates will be used? This means that, for instance, the IE settings that are available out of the
box will not be captured?
It will use all of the templates in the settings template catalog only. The local copies that are installed by the agent will be deleted. This setting must be used with the configuration setting parameter ‘RegisterMSTemplates’ set to true. Please see the
section titled ‘Replace the inbox Microsoft Templates’ in the TechNet article ‘Planning for Custom Template Deployment for Desktop Applications in UE-V 2.0’.
If that's the case how do I use a template such as this one from the template gallery that says, "To use it just delete or move the original DesktopSettings.xml from your Location Template store and copy EnhancedWorkSpace.xml
to the store location."
The creator of that template states that ‘I just mentioned to disable the DesktopSettings.xml template because my template already includes the Default values from that template.’
In the Q&A section of that template
Would it be better to just remove all the default templates and use only the ones I need? Where would I get a copy of the default ones so I can put them in my settings template path if I want to use them?
When you install the agent on a client, the default templates are stored in the
install\templates directory. The default is c:\program files\Microsoft User Experience Virtualization\Templates. You can copy these to the settings template catalog location to use them even with the above settings. Note: Once you
set the GP to replace the default Microsoft templates, the default templates on the clients are deleted. If you have this setting turned on, you may need to install to a machine that is not governed by this GP setting in order to get the default templates.
Hope this helps,
David
MDOP on the Springboard Series on TechNet

RMAN Restore wallet password forgot

hi all,
we have taken backup of database using encryption.
while restoring to another database we forgot the password. it's 11.1.0.7.0 version
is there any alternative way to restore. or to know the password of backup sets from source.
Please let me know.
It's urgent please.
thanks

If you are going to encrypt data then you should have a procedure for recording and storing the encryption keys. It reduces the chances of losing the key.
If the backup was made using a script was the encryption key entered in the script? If so, you might be able to look.
HTH -- Mark D Powell --

Problem during the changing of Password in Active Directory

Hello All !
I am facing a problem during the password modification
in active directory, i got the same exception as other are getting i.e
javax.naming.OperationNotSupportedException: [LDAP: error code 53 - 00002077: SvcErr: DSID-03190959, problem 5003 (WILL_NOT_PERFORM), data 0
                   Can any body help me how i will come to know that 128 bit
Encryption is done successfully. Although i Installed the MS High Encryption Pack but it's registry is not done in Conrol Panel.
is this a problem(as i think) ?
    I am giving the code please check it out->
                      import java.util.Hashtable;
import javax.naming.*;
import javax.naming.ldap.*;
import javax.naming.directory.*;
//import java.io.*;
//import javax.net.ssl.*;
//import java.security.*;
import java.io.UnsupportedEncodingException;
public class setpassword
     public static void main (String[] args)
          Hashtable env = new Hashtable();
          String adminPassword = "";
          String userName = "ou=MCA,ou=Trainee,dc=ControlsNet,dc=local";
          String newPassword = "yadav";
          String keystore = "D:\\j2sdk1.4.2_12\\jre\\lib\\security\\cacerts";
          System.setProperty("javax.net.ssl.trustStore",keystore);
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL,"[email protected]");
          env.put(Context.SECURITY_CREDENTIALS,adminPassword);
          env.put(Context.SECURITY_PROTOCOL,"ssl");
          String ldapURL = "ldap://gateway.ControlsNet.local:636/";
          env.put(Context.PROVIDER_URL,ldapURL);
          try {
               LdapContext ctx = new InitialLdapContext(env,null);
          ModificationItem[] mods = new ModificationItem[1];
               String newQuotedPassword = "\"" + newPassword + "\"";
               byte[] newUnicodePassword = newQuotedPassword.getBytes("UTF-16LE");
               mods[0] = new ModificationItem(DirContext.REPLACE_ATTRIBUTE, new BasicAttribute("unicodePwd", newUnicodePassword));
               ctx.modifyAttributes(userName, mods);
          System.out.println("Reset Password for: " + userName);
               ctx.close();
          catch (NamingException e) {
               System.out.println("Problem resetting password: " + e);
          catch (UnsupportedEncodingException e) {
               System.out.println("Problem encoding password: " + e);
Please reply me immideiately as soon as you see this problem.
I think some of u already solved this problem. thanks in advance.

Believe it or not, looks similar to the problem in the post http://forum.java.sun.com/thread.jspa?threadID=580113&tstart=0
More unbelievable is the huge security hole in your network !String adminPassword = "";
env.put(Context.SECURITY_PRINCIPAL,"[email protected]");
env.put(Context.SECURITY_CREDENTIALS,adminPassword);An administrator with a blank password !
The ldap standard (rfc 2251) defines an anonymous user as a user with a null passsword. By default, Active Directory does not allow anonymous users to perform searches against the directory, let alone reset a user's password.

Oracle 10G Encryption Problem - ORA-28353: failed to open wallet

I have an Oracle 10g R2 database. I would like to use the Transparent Database Encription on a table. However, whenever I try to create or open a wallet I get the following error:
ORA-28353: failed to open wallet
I have a directory called wallet in the $ORACLE_BASE directory. I've checked Meta-Link. I can't seem to find any information on what to do.
Any out-of-the-box ideas.
Thanks,
John

Hi,
Did you follow the procedure described in Oracle 10g documentation titled as 'Advanced Security' about "Using Transparent Data Encryption" (Chapter 3).????
Also , in the advisable actions of Oracle about this type of error is this....
Action: Execute the command again using the correct wallet password or verfying a wallet exists in the specified directory. If necessary, create a new wallet and initialize it.
Regards ,
Simon

Interconnect DB adapter Error when connecting to DB Using Oracle Wallet

Hi all,
I have installed multiple DB adapters on a unix m/c and when i am starting the DB adapter( name ex: B) i am getting the following error.
when i Hash (#)the passwd in adapter.ini without using oracle wallet my DB adapter gets connected if the same is removed i am getting the following Error.
"java.sql.SQLException: invalid arguments in call"
Oracle Wallet password have been set correctly and works fine with one of the DB adapter( name ex: A) and the same setting of A has been used in B.
Would be glad if someone could help to give solution to track oracle wallet and database connectivity.
Oailog.txt
~~~~~~~~~~
Initializing the Bridge oracle.oai.agent.adapter.database.DBBridge..
Initializing connection to the Repository...
Connected to the Repository.
B could not connect to the database
regards
yenyes

The issue was solved.The workaround involved synchronising the security folders the one below the /interconnect and one below /adapters.

Nokia lumia 520 wallet

I just forgot the wallet password,what should i do now?
Solved!
Go to Solution.

The ONLY solution seems to be Resetting the Phone as mentioned HERE

Store Credentials in Registry Wallet

How do I add database credentials to my wallet file that is stored in the registry and not file based?
I am able to get everything working when my wallet is file based. After I create the wallet I normally run this command to add the database credentials.
mkstore -wrl C:\oracle\product\11.2.0\client_1\BIN\owm\wallets\jeffc -createCredential ORCL JEFFC Password
This works find when the wallet is file based. But if I try to run this that is pointing at the registry I get an error after I enter the wallet password.
mkstore -wrl HKEY_CURRENT_USER\Software\ORACLE\WALLETS\DEFAULT -createCredential ORCL JEFFC Password
Enter wallet password:
PKI-02002: Unable to open the wallet. Check password.
The password I enter is correct so I must not be giving the correct registry path. Anybody know?
I am running 11.2.0.1 client on Windows Servoer 2008 R2. Connecting to a 11.2.0.3 database also on Windows Server 2008 R2.

Well I just figured out my own solution. I created a normal file based wallet and added my database credentials and then I opened the file with Wallet Manager and told it to save to Registry and now I am able to connect to the database. I removed the wallet file just to be sure it was working.
Plus your sqlnet.ora file also needs to be updated with the following entry to use your registry.
WALLET_LOCATION =
(SOURCE =
(METHOD = REG)
(METHOD_DATA =
(KEY = DEFAULT)

Can't find my Wallet in TDE

Hi all,
I am experiencing a very strange issue.
I have created a wallet using the Wallet Manager that comes with Oracle 11g for Win2008 and saved it in a location on the File System.
I have setup the ENCRYPTION_WALLET_LOCATION in my sqlnet.ora file, using the EM GUI, following this Guide.
In the EM, as I login as System User, I can see the wallet as closed, but when I insert the wallet password it keeps saying "The wallet does not exist"!
How is that possible?
If it sees it as closed, it should not complain that it does not exist!!!
I'm sure I'm missing something really stupid.
Thanks for your help :)
EDIT: I have manually deleted the wallet ant the EM said "OPEN" :o
How can it be OPEN if there is no actual wallet in the system?!?!
I generated a new wallet and said "CLOSED" again!
I feel like hunting ghosts!

oradba wrote:
.... and saved it in a location on the File System.I guess in a non-default location, default location is %ORACLE_BASE\admin\<SID>\wallet.No, it was default location.
The issue was that I should not have created the wallet by Wallet Manager, but manually by EM setting a password.
Please don't ask me why.
I would not be able to respond.....

Wallet password modification

Similar Messages

Maybe you are looking for