Wallpaper scale not working on IPAD with IOS 7
After updating my IOS to 7 i cannot scale any wallpaper, it just doesn`t allow me to move, get it bigger or smaller, is there any response from apple about it? are they working on this issue? Since everyone with IOS7 on IPad is facing the same issue.
I"m sure it's on apple's to do list. However what you want and what they deem a priority may not be the same.
Users have two choices, wait for Apple to fix it or find a work around. Your wait may be weeks or months, it'll be rolled out if and when Apple decides to roll it out.
part of the issue does stem from the photos people are using. As screens get higher and higher resolution, the photos that are used need to also be of high resolution. 400 x 300 photos snagged off the internet just dont' do well on a display that is 2048-by-1536 resolution at 264 pixels per inch (ppi) (which is for the new air)
Similar Messages
-
Auto backlight does not work on 4S with iOS 7. I had the same problem with iOS 6.1.3! Why ?
rlwebb71 wrote:
... I have the latest generation iPod touch, not the 5, but the latest. So why can't Siri come out and play?
Siri is not a feature of that iPod... 4th Gen...
iOS 6 Which Software for Which iDevices...
http://support.apple.com/kb/HT5457 -
Keyboard Shortcuts not working on iPad Air / iOS 8.1
No idea why.
Good afternoon all.
I met the exact same problem on my new iPad Air with iOS 8.1
My shortcut list is working but after a reboot or a hardware reset it stops to work as due.
I have to edit my list adding and deleting one entry to get it working again.
I am in touch with one technician of Apple Care who will run some tests and will let me know.
Cheers. -
Bt sport not working on iPad Air iOS 8
It installs, I can enter my login details, accept it to use my location but that's it. It then just hangs with the bt background there. I've uninstalled, reinstalled, reset the ipad to no avail. I can't watch the live content via safari as it directs me to install the app, which isn't working.
Any ideas on a solution?
TaWorking fine on my iPad air yesterday... With iOS 8..... I also used it before and after installing the 8.0.2 iOS update.
Did you have it working before on iOS 7 before upgrading to iOS 8 ? -
PC is set up for home sharing and 2 iPads and 1 iPhone is sharing fine. 1 iPad and 1 iPhone is not home sharing. The only difference on the devices not working is that the Apple account name is [email protected] while the Apple ID is [email protected] which is also the Apple ID used in creating Home Sharing and is the account used on the devices that are working. Do they need to be the same? My wife has her own iTunes account. If they are the same how would her purchases be charged to her account? Thank you for any help.
Hi there,
The article below has some more information for troubleshooting Home Sharing that you may find helpful.
Understanding Home Sharing
http://support.apple.com/kb/ht3819
-Griff W. -
Explicit tags do not work on IPad with Restrictions on
I have noticed (though I cannot say if it is the same for songs purchased through the Itunes store as I do not own any explicit ones) that songs I have manually marked as explicit with the program MP3TAG that on my Ipad and in itunes if I enable restricts they are still accessable and playable. I would like if possible a solution to fix this as this is a major problem for me
I convert all my mp3's to m4a's/mp4's before adding all my tags
my m4a's also have some custom tags such as label, arranger, and lyrcist. though I doubt that they have affected anything as itunes does not read them.
here is where I got the information on adding Itunes explicit tags to mp3's and m4a's
http://forums.mp3tag.de/index.php?showtopic=10847
the song I used for testing is ThatXX - By G-Dragon
tags as they appear in mp3tag
The tags correctly displayed in itunes
Ipad Screenshots
restrictions are enabled here but I can still see the song in my library and play itI didn't read this forum to see what other people's problems were.
Reading these forums get you only reports of problems - that's what tech support forums are for. You'll find similar reports in any tech support forum you might read.
I could have dumped the music in my trusty old 4GB iPod mini that still mounts like a hard drive and stored my photos there.
And you could have had the same problem if your iPod failed.
bring enough camera memory cards. They're cheap enough.
And they're easily damaged or corrupted - that's why there are so many products and services advertised to recover photos from memory cards.
I'm not defending the iPad, per se, but this is not an issue related solely to iPads. Any device can fail, or get damaged, or lost or stolen. The simplest solution: never trust critical content to any single device or medium, regardless of what that is. If you rely on any single point of failure, you're just asking for trouble.
Regards. -
Imessage not working on iPad since iOS 7
Very frustrated.
Since the ios7 update my imessage and facetime on my ipad are not working, iphone is fine.
I have reset ipad , i have forgot device on wifi and reset it. Ive read all advice here and nothing works. It tells me to check my connection.
Im using my apple account ive always used im using the wifi i use on my phone , ive checked all my passwords etc etc etc
Now im just frustrated as dont know what else to do... Please help.Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again. -
Song Ratings Not Working on iPad 2/iOS 5.0.11
Hello,
I have an iPad 2 with latest firmware iOS 5.0.1.
I use song ratings. An album with multiple songs, can have different ratings for each song.
When I tap an album and check the back of it with the song list, usually the song that I pick to play off the back of the album cover should display right above the correct song rating assigned to it. Unfortunately this does not seem to be working. Instead whatever rating is displayed at the top is almost static and doesn't change with the songs that are being played. Also if a song is playing and I change the rating from 3 stars to 1 star, the 1 star is now always displayed even as I play different songs that have different ratings that I haven't altered.
I have an iPhone 4S with latest firmware iOS 5.0.1 as well, and this problem does not exist on the iPhone, so it seems to be iPad specific.
Is anyone else having this problem? Would anyone have any possible solutions or pointers?
Thanks.I can see the acknowledgement that this issue will be fixed in the 'next' software update. Considering the original post was for an iPad 2 running 5.0.1, I am not sure if this issue on iOS 5.1 which runs on my new iPad (4G) is considered fixed. As I reported in my previous post it is impossible to update individual tracks. I also tried adding entire collection to a single playlist, shuffling the playlist. While shuffle is in progress, turning to the 'list' view that allows tracks to be rated does who the currently shuffled playlist and the currently playing track and assigns the rating to the track correctly. However, as soon as the second track plays, switching to list view (which displays the ratings) lists only the tracks from the currently playing track's album. Which is insane IMHO.
So, was this not fixed with 5.1 update? Or the iOS 5.1 will get it's own piece of update on this? -
IMessage & FaceTime Not Working on iPad after iOS 6.0.1 update?
I have an iPad 16GB 3rd Generation and whenever I try to sign in with my Apple ID to Messages and FaceTime it pops up with "Could not sign in. Please check your network connection and try again." I have tried so many things for this including resetting my network settings and creating a new Apple ID but my wifi connection works perfectly fine on safari etc but not on iMessage and FaceTime. Please Help?
Tried that already. It doesn't work.
The problem isn't that the app is frozen, it just blinks, then closes when you attempt to launch it.
Thank you for the suggestion, though. I appreciate your willingness to help.
I may try restoring my iPad tomorrow. -
Not working multitopology ISIS with IOS and IOS-XR
Hi everyone,
I've gon a problem setting up IPv6 routing with ISIS in the test network. There are four routers connected as shown on the image.
I've got problems setting up IPv6 routing in this topology. I tried single topology and multitopology ISIS. Neither of them works properly. Single topology simple does not come up when IPv6 is configured in ISIS. Multitopology yet comes up but uyields only working IPv4 roting. I can see that IPv6 ISIS RIB is buit by the routers, but it is not copied into the main routing table.
That's what I get in the multitopology mode:
All neignors are up.
R2#show isis neighbors
Tag null:
System Id Type Interface IP Address State Holdtime Circuit Id
R7 L1 Et0/2 2.2.27.7 UP 7 R7.04
R8 L1 Et0/1 2.2.28.8 UP 9 R8.03
R9 L1 Et0/0 2.2.29.9 UP 7 R9.01
Database in consistent on all four routers
R2#show isis database
Tag null:
IS-IS Level-1 Link State Database:
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
R2.00-00 * 0x0000001C 0x21DD 727 0/0/0
R7.00-00 0x00000011 0xF6EF 866 0/0/0
R7.04-00 0x00000007 0x5CD2 1117 0/0/0
R8.00-00 0x0000000B 0xD2EA 941 0/0/0
R8.01-00 0x00000006 0xF0C3 878 0/0/0
R8.03-00 0x00000006 0x7E39 805 0/0/0
R9.00-00 0x0000000B 0x4071 817 0/0/0
R9.01-00 0x00000006 0x8D2A 783 0/0/0
R9.03-00 0x00000006 0xE3CC 840 0/0/0
ISIS IPv6 RIB contains only local prefixes
R2#show isis ipv6 rib
IS-IS IPv6 process , local RIB
2002:2:2::7/128
2002:2:2:27::/64
2002:2:2:78::/64
2002:2:2:79::/64
IPv6 topology is not complete as if R8 and R9 were not in database
R2#show isis ipv6 topology
Tag null:
IS-IS TID 2 paths to level-1 routers
System Id Metric Next-Hop Interface SNPA
R2 --
R7 10 R7 Et0/2 0202.5a00.b120
R8 **
R9 **
A closer look at isis database:
R2#show isis database detail
Tag null:
IS-IS Level-1 Link State Database:
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
R2.00-00 * 0x0000001D 0x1FDE 1004 0/0/0
Area Address: 47.0002
Topology: IPv4 (0x0)
IPv6 (0x2)
NLPID: 0xCC 0x8E
Hostname: R2
IP Address: 2.2.0.2
Metric: 10 IP 2.2.0.2/32
Metric: 10 IP 2.2.29.0/24
Metric: 10 IP 2.2.28.0/24
Metric: 10 IP 2.2.27.0/24
IPv6 Address: 2002:2:2::2
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:29::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:28::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:27::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2::2/128
Metric: 10 IS-Extended R7.04
Metric: 10 IS-Extended R8.03
Metric: 10 IS-Extended R9.01
Metric: 10 IS (MT-IPv6) R7.04
Metric: 10 IS (MT-IPv6) R8.03
Metric: 10 IS (MT-IPv6) R9.01
R7.00-00 0x00000012 0xF4F0 1187 0/0/0
Area Address: 47.0002
Topology: IPv4 (0x0)
IPv6 (0x2)
NLPID: 0xCC 0x8E
Hostname: R7
IP Address: 2.2.0.7
Metric: 10 IP 2.2.0.7/32
Metric: 10 IP 2.2.78.0/24
Metric: 10 IP 2.2.79.0/24
Metric: 10 IP 2.2.27.0/24
IPv6 Address: 2002:2:2::7
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:78::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:79::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:27::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2::7/128
Metric: 10 IS-Extended R7.04
Metric: 10 IS-Extended R8.01
Metric: 10 IS-Extended R9.03
Metric: 10 IS (MT-IPv6) R7.04
Metric: 10 IS (MT-IPv6) R8.01
Metric: 10 IS (MT-IPv6) R9.03
R7.04-00 0x00000007 0x5CD2 640 0/0/0
Metric: 0 IS-Extended R7.00
Metric: 0 IS-Extended R2.00
R8.00-00 0x0000000B 0xD2EA 464 0/0/0
Area Address: 47.0002
NLPID: 0xCC 0x8E
Topology: IPv4 (0x0)
IPv6 (0x2)
Hostname: R8
IP Address: 2.2.0.8
IPv6 Address: 2002:2:2::8
Metric: 10 IS-Extended R8.01
Metric: 10 IS-Extended R8.03
Metric: 10 IP 2.2.0.8/32
Metric: 10 IP 2.2.28.0/24
Metric: 10 IP 2.2.78.0/24
Metric: 10 IPv6 (MT-IPv6) 2002:2:2::8/128
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:28::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:78::/64
R8.01-00 0x00000007 0xEEC4 1155 0/0/0
Metric: 0 IS-Extended R8.00
Metric: 0 IS-Extended R7.00
R8.03-00 0x00000006 0x7E39 328 0/0/0
Metric: 0 IS-Extended R8.00
Metric: 0 IS-Extended R2.00
R9.00-00 0x0000000C 0x3E72 1035 0/0/0
Area Address: 47.0002
NLPID: 0xCC 0x8E
Topology: IPv4 (0x0)
IPv6 (0x2)
Hostname: R9
IP Address: 2.2.0.9
IPv6 Address: 2002:2:2::9
Metric: 10 IS-Extended R9.01
Metric: 10 IS-Extended R9.03
Metric: 10 IP 2.2.0.9/32
Metric: 10 IP 2.2.29.0/24
Metric: 10 IP 2.2.79.0/24
Metric: 10 IPv6 (MT-IPv6) 2002:2:2::9/128
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:29::/64
Metric: 10 IPv6 (MT-IPv6) 2002:2:2:79::/64
R9.01-00 0x00000007 0x8B2B 1048 0/0/0
Metric: 0 IS-Extended R9.00
Metric: 0 IS-Extended R2.00
R9.03-00 0x00000007 0xE1CD 1091 0/0/0
Metric: 0 IS-Extended R9.00
Metric: 0 IS-Extended R7.00
I don't understand the following: Why R8 doesn't consider itself attached to Pseudonodes R8.01 and R8.03 in IPv6 topology? The same question about R9 and Pseudonodes R9.01 and R9.03 in IPv6 topology. R7 and R2 consider themselves as attached to Pseudonode R7.04, although R7.04 doesn't look much different from the rest of the Pseudonode LSPs in the database. This fact still doesn't allow them to calculate a correct RIB.
Am I missing something?
Configs of the devices is below:
######R2########
service timestamps debug datetime msec
service timestamps log datetime msec
hostname R2
boot-start-marker
boot-end-marker
vrf definition ABC
rd 2:2
address-family ipv4
route-target export 2:2
route-target import 2:2
route-target import 1002:2
exit-address-family
no aaa new-model
clock timezone PST 0
ip source-route
ip cef
ipv6 unicast-routing
ipv6 cef
multilink bundle-name authenticated
mpls label protocol ldp
interface Loopback0
ip address 2.2.0.2 255.255.255.255
ip router isis
ipv6 address 2002:2:2::2/128
ipv6 router isis
interface Ethernet0/0
ip address 2.2.29.2 255.255.255.0
ip router isis
ipv6 address 2002:2:2:29::2/64
ipv6 router isis
mpls ip
interface Ethernet0/1
ip address 2.2.28.2 255.255.255.0
ip router isis
ipv6 address 2002:2:2:28::2/64
ipv6 router isis
mpls ip
interface Ethernet0/2
ip address 2.2.27.2 255.255.255.0
ip router isis
ipv6 address 2002:2:2:27::2/64
ipv6 router isis
mpls ip
interface Ethernet0/3
no ip address
shutdown
interface Ethernet1/0
vrf forwarding ABC
ip address 172.2.142.2 255.255.255.0
interface Ethernet1/1
no ip address
shutdown
interface Ethernet1/2
no ip address
shutdown
interface Ethernet1/3
no ip address
shutdown
router isis
net 47.0002.0000.0000.0002.00
is-type level-1
metric-style wide
address-family ipv6
multi-topology
exit-address-family
router rip
version 2
address-family ipv4 vrf ABC
redistribute bgp 2 metric 1
network 172.2.0.0
no auto-summary
version 2
exit-address-family
router bgp 2
no bgp default ipv4-unicast
bgp log-neighbor-changes
neighbor 2.2.0.9 remote-as 2
neighbor 2.2.0.9 update-source Loopback0
address-family ipv4
no synchronization
network 2.2.0.2 mask 255.255.255.255
neighbor 2.2.0.9 activate
neighbor 2.2.0.9 send-community
no auto-summary
exit-address-family
address-family vpnv4
neighbor 2.2.0.9 activate
neighbor 2.2.0.9 send-community extended
neighbor 2.2.0.9 next-hop-self
exit-address-family
address-family ipv4 vrf ABC
no synchronization
redistribute rip
exit-address-family
no ip http server
mpls ldp router-id Loopback0
control-plane
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
line vty 0 4
login
end
######R7########
service timestamps debug datetime msec
service timestamps log datetime msec
hostname R7
boot-start-marker
boot-end-marker
vrf definition ABC
rd 2:2
address-family ipv4
route-target export 2:2
route-target import 2:2
route-target import 1002:2
exit-address-family
no aaa new-model
clock timezone PST 0
ip source-route
ip cef
ipv6 unicast-routing
ipv6 cef
multilink bundle-name authenticated
mpls label protocol ldp
interface Loopback0
ip address 2.2.0.7 255.255.255.255
ip router isis
ipv6 address 2002:2:2::7/128
ipv6 router isis
interface Ethernet0/0
ip address 2.2.78.7 255.255.255.0
ip router isis
ipv6 address 2002:2:2:78::7/64
ipv6 router isis
mpls ip
interface Ethernet0/1
ip address 2.2.79.7 255.255.255.0
ip router isis
ipv6 address 2002:2:2:79::7/64
ipv6 router isis
mpls ip
interface Ethernet0/2
ip address 2.2.27.7 255.255.255.0
ip router isis
ipv6 address 2002:2:2:27::7/64
ipv6 router isis
mpls ip
interface Ethernet0/3
no ip address
shutdown
interface Ethernet1/0
vrf forwarding ABC
ip address 172.2.17.7 255.255.255.0
interface Ethernet1/1
no ip address
shutdown
interface Ethernet1/2
no ip address
shutdown
interface Ethernet1/3
no ip address
shutdown
interface Serial2/0
no ip address
no fair-queue
serial restart-delay 0
interface Serial2/1
no ip address
shutdown
serial restart-delay 0
interface Serial2/2
no ip address
shutdown
serial restart-delay 0
interface Serial2/3
no ip address
shutdown
serial restart-delay 0
router ospf 100 vrf ABC
log-adjacency-changes
redistribute bgp 2 subnets
network 172.2.0.0 0.0.255.255 area 0
router isis
net 47.0002.0000.0000.0007.00
is-type level-1
metric-style wide
address-family ipv6
multi-topology
exit-address-family
router bgp 2
no bgp default ipv4-unicast
bgp log-neighbor-changes
neighbor 2.2.0.9 remote-as 2
neighbor 2.2.0.9 update-source Loopback0
neighbor 2002:2:2::9 remote-as 2
neighbor 2002:2:2::9 update-source Loopback0
address-family ipv4
no synchronization
network 2.2.0.7 mask 255.255.255.255
neighbor 2.2.0.9 activate
neighbor 2.2.0.9 send-community
no auto-summary
exit-address-family
address-family vpnv4
neighbor 2.2.0.9 activate
neighbor 2.2.0.9 send-community extended
exit-address-family
address-family ipv6
no synchronization
network 2002:2:2::7/128
neighbor 2002:2:2::9 activate
exit-address-family
address-family ipv4 vrf ABC
no synchronization
redistribute ospf 100 vrf ABC
exit-address-family
no ip http server
mpls ldp router-id Loopback0
control-plane
line con 0
exec-timeout 0 0
privilege level 15
logging synchronous
line aux 0
line vty 0 4
login
end
######R9########
hostname R9
telnet vrf default ipv4 server max-servers 100
username student
group root-lr
secret 5 $1$FJX6$23S1vUlkI7nuRNSFMWR8N0
aaa authentication login default local
cdp
vrf ABC
address-family ipv4 unicast
import route-target
2:2
1002:2
export route-target
2:2
control-plane
management-plane
out-of-band
interface MgmtEth0/0/CPU0/0
allow Telnet
interface Loopback0
ipv4 address 2.2.0.9 255.255.255.255
ipv6 address 2002:2:2::9/128
interface MgmtEth0/0/CPU0/0
ipv4 address 10.0.8.129 255.255.255.0
interface GigabitEthernet0/2/1/0
description uplink SW4
interface GigabitEthernet0/2/1/1
description uplink R2, R5
interface GigabitEthernet0/2/1/1.29
description - VLAN 29 (R2)
ipv4 address 2.2.29.9 255.255.255.0
ipv6 address 2002:2:2:29::9/64
dot1q vlan 29
interface GigabitEthernet0/2/1/1.59
description - VLAN 59 (R5)
vrf ABC
ipv4 address 172.2.59.9 255.255.255.0
dot1q vlan 59
interface GigabitEthernet0/2/1/2
description uplink R6, R7
interface GigabitEthernet0/2/1/2.69
description - VLAN 69 (R6)
ipv4 address 2.2.69.9 255.255.255.0
ipv6 address 2002:2:2:69::9/64
dot1q vlan 69
interface GigabitEthernet0/2/1/2.79
description - VLAN 79 (R7)
ipv4 address 2.2.79.9 255.255.255.0
ipv6 address 2002:2:2:79::9/64
dot1q vlan 79
interface GigabitEthernet0/2/1/3
shutdown
interface GigabitEthernet0/2/1/4
shutdown
interface POS0/2/0/0
shutdown
interface POS0/2/0/1
shutdown
interface POS0/2/0/2
shutdown
interface POS0/2/0/3
shutdown
route-policy default_policy_pass_all
pass
end-policy
router static
address-family ipv4 unicast
2.2.69.6/32 GigabitEthernet0/2/1/2.69
router isis abc
is-type level-1
net 47.0002.0000.0000.0009.00
address-family ipv4 unicast
metric-style wide
interface Loopback0
address-family ipv4 unicast
address-family ipv6 unicast
interface GigabitEthernet0/2/1/1.29
address-family ipv4 unicast
address-family ipv6 unicast
interface GigabitEthernet0/2/1/2.79
address-family ipv4 unicast
address-family ipv6 unicast
router bgp 2
address-family ipv4 unicast
network 2.2.0.9/32
address-family vpnv4 unicast
address-family ipv6 unicast
network 2002:2:2::9/128
address-family vpnv6 unicast
neighbor 2.2.0.2
remote-as 2
update-source Loopback0
address-family ipv4 unicast
next-hop-self
address-family vpnv4 unicast
route-reflector-client
neighbor 2.2.0.7
remote-as 2
update-source Loopback0
address-family ipv4 unicast
next-hop-self
address-family vpnv4 unicast
route-reflector-client
next-hop-self
address-family ipv6 unicast
next-hop-self
address-family vpnv6 unicast
next-hop-self
neighbor 2.2.0.8
remote-as 2
update-source Loopback0
address-family ipv4 unicast
next-hop-self
address-family vpnv4 unicast
route-reflector-client
next-hop-self
neighbor 2.2.69.6
remote-as 1002
address-family ipv4 unicast
route-policy default_policy_pass_all in
route-policy default_policy_pass_all out
address-family vpnv4 unicast
route-policy default_policy_pass_all in
route-policy default_policy_pass_all out
neighbor 2002:2:2::7
remote-as 2
update-source Loopback0
address-family ipv6 unicast
next-hop-self
neighbor 2002:2:2:69::6
remote-as 1002
address-family ipv6 unicast
route-policy default_policy_pass_all in
route-policy default_policy_pass_all out
vrf ABC
rd 2:2
address-family ipv4 unicast
redistribute eigrp 100
mpls ldp
router-id 2.2.0.9
interface GigabitEthernet0/2/1/1.29
interface GigabitEthernet0/2/1/2.79
router eigrp 100
vrf ABC
address-family ipv4
default-metric 100000 10 250 1 1500
autonomous-system 100
redistribute bgp 2
interface GigabitEthernet0/2/0/1.59
interface GigabitEthernet0/2/1/1.59
end
######R8########
hostname R8
telnet vrf default ipv4 server max-servers 100
username student
group root-lr
secret 5 $1$Y39m$k.fAmjkI6OEFDmiIfSkGt1
aaa authentication login default local
cdp
vrf ABC
address-family ipv4 unicast
import route-target
2:2
1002:2
export route-target
2:2
control-plane
management-plane
out-of-band
interface MgmtEth0/0/CPU0/0
allow Telnet
interface Loopback0
ipv4 address 2.2.0.8 255.255.255.255
ipv6 address 2002:2:2::8/128
interface MgmtEth0/0/CPU0/0
ipv4 address 10.0.8.128 255.255.255.0
interface GigabitEthernet0/2/1/0
description uplink SW3
interface GigabitEthernet0/2/1/1
description uplink R3, R7
interface GigabitEthernet0/2/1/1.38
description - VLAN 38 (R3)
vrf ABC
ipv4 address 172.2.38.8 255.255.255.0
dot1q vlan 38
interface GigabitEthernet0/2/1/1.78
description - VLAN 78 (R7)
ipv4 address 2.2.78.8 255.255.255.0
ipv6 address 2002:2:2:78::8/64
dot1q vlan 78
interface GigabitEthernet0/2/1/2
description uplink R2, R15
interface GigabitEthernet0/2/1/2.28
description - VLAN 28 (R2)
ipv4 address 2.2.28.8 255.255.255.0
ipv6 address 2002:2:2:28::8/64
dot1q vlan 28
interface GigabitEthernet0/2/1/2.158
description - VLAN 158 (R15)
dot1q vlan 158
route-policy default_policy_pass_all
pass
end-policy
router isis abc
is-type level-1
net 47.0002.0000.0000.0008.00
address-family ipv4 unicast
metric-style wide
interface Loopback0
address-family ipv4 unicast
address-family ipv6 unicast
interface GigabitEthernet0/2/1/1.78
address-family ipv4 unicast
address-family ipv6 unicast
interface GigabitEthernet0/2/1/2.28
address-family ipv4 unicast
address-family ipv6 unicast
router bgp 2
address-family ipv4 unicast
network 2.2.0.8/32
address-family vpnv4 unicast
neighbor 2.2.0.9
remote-as 2
update-source Loopback0
address-family ipv4 unicast
next-hop-self
address-family vpnv4 unicast
vrf ABC
rd 2:2
address-family ipv4 unicast
network 172.2.38.0/24
allocate-label all
neighbor 172.2.38.3
remote-as 123
address-family ipv4 unicast
route-policy default_policy_pass_all in
route-policy default_policy_pass_all out
as-override
send-extended-community-ebgp
mpls ldp
router-id 2.2.0.8
interface GigabitEthernet0/2/1/1.78
interface GigabitEthernet0/2/1/2.28
end
RP/0/0/CPU0:R8#Hello,
Can you check on XR that you have option of enabling metric-style wide under ipv6 address-family.I'm not sure but i suppose you will also need to configure metric-style wide under ipv6 address-family as you are using multi-topology .IOS default run single topology and XR run default multi-topology.only need to be sure that you are running same topology and metric-style same on all router,in transition process like from multi to single or changing metric-style you can use "metric-style transition" option..
Regards,
Ashish -
Notes not working on iPad after iOS 6.1.3
After updating to iOS 6.1.3, Notes will not load on my iPad. When I click the icon, a blank note opens momentairly, then the app closes. Anyone else having this issue? It appears to be fine on my iPhone. Only the iPad seems to be affected.
Tried that already. It doesn't work.
The problem isn't that the app is frozen, it just blinks, then closes when you attempt to launch it.
Thank you for the suggestion, though. I appreciate your willingness to help.
I may try restoring my iPad tomorrow. -
IMessage not working after updating with iOS 6.1.3
My son's iPhone will not 'activate' iMessage after he updated to iOS 6.1.3.
Tried resetting.
Tried switching iMessage on and off.
Tried Setting/WiFi/Tap blue dot/Renew Lease
Any other ideas?
Other features seem to be working as normal.
Thanks.Nope still can't get it to work ChrisJ4203
Tried the Send & Receive button. The Apple Id is correct but there is no 'tick' next to the correct telephone number. Number is greyed out so can't click on it.
Any ideas? -
IMessage not working on iPad after iOS 7 u/g
I know this is on all the forums - somewhere, but my iPad has been stuffed as far as iMessage is concerned since iOS 7 was installed. It receives OK, but when you try to send, the send ribbon gets to around the 80% mark and it stops. Nothing I do has made any difference. Reset all the cloud setting, verified my connection, but nothing.
Ok, so it's a known bug affecting a common function of Apple devices, right? Why the **** wasn't it checked before the release? And what the heck is taking so long? iOS 7 has been out a month now!
-
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
I have ipad with IOS 7, Some apps doesn' t work, safari not open some web site. What can I do?
Try this and see if it helps.
Settings>Safari>Clear cookies and data.
Now close Safari completely. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then "swipe up" or "drag up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Maybe you are looking for
-
Did you know that your Internet Explorer is out of date?
Hello there, when i access this site http://www.sickkids.ca/ , I am getting this error message, please advice. Did you know that your Internet Explorer is out of date? To get the best possible experience using our website we recommend that you upgrad
-
Hi in AS01 creation of Asset master data, the description field is only 50 characters and the Asset main text is also 50 Characters. But client requirement is that the description he want to 200 characters because he has huge descrition to capture i
-
How to install creative suite 5 master collection?
I am having two files of Adobe Creative Suite 5 Master Collection[Windows] - 1) Disk1.iso - 7.09 GB [7.09 GB after extraction] 2) Disk2.iso - 6.10 GB [6.17 GB after extraction] NOTE : I am not having the DVDs or CDs of the CS5 master collection. I am
-
Show all rows in a dataTable - XSD datasource
Hi I have designed a report in CR2008 and my datasource for the report is an XSD file. There are 2 tables Table A and B. Table A is as follows: AID Name Reference Period Manager 5 Name 1 Ref 1 July 2009 Use
-
Panorama Greyed Out in PSE 6 on Mac
Hi there, Just got back from the Italian Dolamites with my new Nikon camera. I want to try and create a panaramic view but it it grayed out under file new. Face is there etc; I am in full edit mode I have searched the forum but am still a