Wallpapers for the non-startup screens

Hey all,
I was wondering if there is any way of putting wallpapers for the screens after the 'scroll to unlock' screen? I don't see a point of having a wallpaper for the screen that is used the least and have just a black background for the rest of the screens. Is there a way to add wallpapers here?
Thanks

No, there is no way to do that. Only Apple can implement that.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Similar Messages

  • 'Music' displays but won't play. Settings appear correct and iPhone is selected for output.  Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure.  Ideas????

    'Music' displays but won't play. Settings appear correct and iPhone (3G)  is selected for output.  Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure.  Ideas????

    Thank you for the replies.
    Appearane of 'Music' functions (I>>   > II   <<I,   plus volume slider)  on the lock/log in screen (when first turning on the iPhone) thus far seems without pattern, i.e. regardless of which if any applications are up in the background, and indeed even when all have been quit.
    All visual aspects of 'Music' appear normal after launch including the title scroll across the top in vertical mode. However, while pressing play (>) converts the play (>) icon to pause (II), selected song does not play and the elapsed time bar (upper end between the track count and the repeat/shuffle icons) remains stationary at 0:00 or at any point to which it is dragged.  When using home sharing this same problem persists regardless of what output is selected.
    Hope that may prompt a thought somewhere.

  • Mac freezes on the apple startup screen?

    My iMac 24 inch freezes on the apple startup screen, then it takes along time for the cog wheel to start turning, and then that's all you'll get untill you switch off. I've fixed permissions and erased and reinstalled but still same issues, any ideas for what to do next????

    If you can afford to erase everything again...
      1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion hopefully you'll be able to get a good install.
    Or...
    Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT.
    The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
    Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Rember is a freeware GUI for the memtest ...
    http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

  • How can I modify the UI for the crystalreportviewer prompt screen ?

    <p>Hi,</p><p> I am using Crystal Report XI with JRC.</p><p>I have come across a couple of issues. My report accepts 2 parameters from the user. One is a date field and the other is the &#39;Period&#39;. I have provided a drop-down having values as Daily, Weekly, Monthly, Quarterly, Yearly.</p><p> The following are the issues that I have come across:</p><p>1. Selecting a value from the drop-down and submitting the form gives the following error.</p><p>     [java] 17:46:20,265 INFO  [STDOUT] 17:46:20,265 ERROR [com.businessobjects.reports.sdk.JRCCommunicationAdapter] JRCAgent11 detected an exception: The value for parameter `Period` must match one of the specified default values.<br />     [java]     at com.crystaldecisions.reports.dataengine.d.case(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.dataengine.d.at(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.dataengine.d.new(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.common.as.a(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.common.ae.a(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.b.k.a(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.b.s.do(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)<br />     [java]     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.else(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.for(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.do(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.q.if(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)<br />     [java]     at com.crystaldecisions.proxy.remoteagent.u.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.DataDefController.a(Unknown Sour<br />ce)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.modify(<br />Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.modify(<br />Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.setCurr<br />entValues(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPromptParameterF<br />ields(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPromptPa<br />rameterFields(Unknown Source)<br />     [java]     at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPr<br />omptParameterFields(Unknown Source)<br />     [java]     at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPromptParam<br />eterFields(Unknown Source)</p><p> When in the report I set allowcustomvalues to true then it accepts the value selected from the dropdown. But in this case the prompt screen shows a textbox next to the drop-down that gets populated on selecting any option from the dropdown. This textbox is editable and can accept any value. Is there a way I can get rid of this textbox. Also i would like to know why the drop-dwon by itself is incapable of passing the value.</p><p> 2. Secondly, Is there anyway I can change the UI for the crystalreportviewer prompt screen being displayed for accepting the parameters from the user. As per my clients requirement the messages displayed in the prompt screen should be customised.</p><p>3. The third issue is with the date parameter. When a date is selected using the calender control the textbox gets populated in the following format Date(yyyy,mm,dd). My requirement is that this should be a userfriendly format like mm-dd-yyyy. I have succesfully modified the crystalreportviewer javascript so that the calender returns the date in the required format i.e. mm-dd-yyyy. But in this case the date parameter is not accepted though no error is displayed on the console. I have tried rechanging the format into Date(yyyy,mm,dd) before the prompt form is submitted but even this didnot help. What can I do to overcome this problem? </p><p>Any help with respect to the above problems will be highly appreciated.</p><p>Thanks & Regards</p>

    <p>From the looks of it, the default parameter prompt screen isn&#39;t really fitting your requirements.  You have a number of requests for modification.</p><p>In your case I think the best thing to do would be to create your own parameter prompt screen.  You can use the SDK to create a page that works for all reports by inspecting the reports parameters before you set the values.</p><p>This would allow you the flexibility of easily meeting your customers requirements.</p><p>Point 1 - I&#39;m not sure.</p><p>Point 2 - There isn&#39;t much access to change the prompt screen.</p><p>Point 3 - I&#39;m not sure why you would want to change the formatting of the Date when you are already using a calendar object to get it.  It sounds like you might have a small mistake in the way you edited the javascript.</p><p>I really think you are probably better off creating your own prompt screen. <br /></p><p>Rob Horne<br /><a href="/blog/10">Rob&#39;s blog - http://diamond.businessobjects.com/blog/10</a></p>

  • Problem in  BOM or component allocation for the Non- codified Item in a PO.

    Hi All,
    Please advise how to explode a BOM or Assign component in a Purchase order with Item category (L) for a Operation oriented material for which no material code is created from a production order .
    Actually in my scenario, no raw material component will send to the Sub -Contract Vendor. Only Assembled operation material lets say operation 20 from a routing ( which is not having material code ) from an In - house production from a shopfloor has to be sent to the vendor to create a operation 30 material , which is also not having a material code." How to explode a BOM or component allocation for the Non- codified Item in a PO".
    Kindly give me the IMG settings for the above scenario.
    regards,
    YK

    Hi Prasobh,
    Tnx for your suggestion. But, the client external processing routing is not constant activity . Based on the Operation bottlenecks client is sending the operation as external Processing. For Eg., If on first order operation 20 be external , Then in second order operation 20 need not be external. operation 30 may go out for external processing. Client does not want a material code for each operation.
    Give your valuable suggestion.
    regards,
    YK

  • My MacBook won't go past the gray startup screen.

    I shut down my MacBook pro during a software update because the update appeared to have frozen. When I tried to reboot my computer afterwards, it would go to the gray startup screen with the spinning gear and not progress any further. I have tried multiple times to restart it, each time getting the same result, I have also tried starting it up holding down shift, another time holding down control option p r, and also holding shift. Each time gave me the same result of freezing at the gray screen. Any idea on what I can do to resolve this problem?

    Hi,
    This article may help. What happened was a kernel panic. They can be caused by either hardware or software. Try the syeps outlined in the article and post back the results.
    John

  • Non-stock purchase for the non-valuated item

    For normal valuated items, if we make it account assigned on PO, it didn't update the inventory on receipt but rather gets charged to the cost object on the PO.
    Can we have similar functionality for non-valuated item.
    We are having a non-valuated but stock item purchasing scenario.  For this we are updating only the quantity of receipt but the value is getting charged to the cost object on PO.
    Now user wants to buy same item and charge it to the specific cost object (it's oka upto this point)..AND don't want to update the quanity in inventory.
    So in short can we control the no qty. update for the non-valuated item as we can control for valuated item through account-assigned purchasing.

    Hi,
    But why u need quantity and value both  of a material should not be updated ??
    Ok...
    Create a Material type  and go to OMS2 and  click Quantity upadating and Value updating in Dialog Structure .Now Check ur valuation Area( example Plant) and do not tick Quantity upadating and Value updating check box.
    Now try ur transaction and it will work without affecting quantity and value.
    If helpful then reward.
    Regards,
    Biju K

  • In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the  "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestion

    In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the  "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?

    Many thanks for the diagnostics.
    Failed while scanning for CD / DVD drives, error 2380.
    Error while opening iTunes CD driver.  This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
    With that one, I'd start with solution 3 from the following document:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

  • New Gl- report with some details of CO for the non leading ledger

    Hi,
    I am using New GL. I have 2 ledgers (local ledger and USGAAP); The local ledger is the leading ledger, so is the one which impacts to CO. I need some information in CO (mainly cost center) for the non-leading ledger (USGAAP). I am thinking in create a report painter with the table of non-leading ledger, but I cannot find a table in NGL which save the CO object and can choose the ledger. I am looking too, this information by a standard report, but I cannot find one.
    Any idea about a solution of this situation?
    Thanks,
    Cecilia

    Hi Cecilia, did you assign Cost Center scenario (FIN_CCA) to your ledgers?, otherwise NGL Tables (FAGLFLEXT and FAGLFLEXA) won't have Cost Center field populated. If this is the case, maybe your only option is use BKPF then BSEG + BSEG_ADD (Entry View of Accounting Document for Additional Ledgers) and pull Cost Center from there.
    I hope this helps.

  • Can you use wallpapers for the icons on the iphone 3g? If so, How

    Can you use wallpapers for the icons on the iphone 3g? If so, How

    On the Mac to save a picture from a web page <CTRL> click on the picture then choose Save Image As... and save it onto the desktop. Once you have collected all your pictures onto the desktop open iPhoto and Import all the images into an iPhoto Album. Quit iPhoto.
    Open iMovie, then go to the Toolbar along the right side of the iMovie window and click on the camera icon to browse through your iPhoto Library. Find your pictures then drag them into the Project Browser window.

  • [svn] 3048: Always map urls through the rootURL property, even for the non-proxy case.

    Revision: 3048
    Author: [email protected]
    Date: 2008-08-29 15:40:17 -0700 (Fri, 29 Aug 2008)
    Log Message:
    Always map urls through the rootURL property, even for the non-proxy case. This might
    change the behavior slightly if you set rootURL on HTTPService for the non-proxy case
    as that would have been ignored in the current code path but it seem less consistent.
    If rootURL is not set, it defaults to the swf's URL which should give the same relative
    URL semantics we get today by default when rootURL is not set.
    blazeDS checkintests pass
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/AbstractOperation.as

    Of the second and third scripts, the latter could perhaps be deemed the "most secure"; however, it might block more than you want. If you really want to use one of those, then I'd suggest using the second script. Otherwise, I'd recommend that you take a look here. (I only slightly examined the first script.... I do not understand the language of the comments, and I'm no iptables whiz. )
    Also, note that you don't have to use an actual script to set up the rules; rather, you can save the rules you want to a file that will be read by iptables automatically (/etc/iptables/iptables.rules). Here's a modified version of mine:
    # /etc/iptables/iptables.rules
    # These rules (and the commented instructions) derived from:
    # http://ubuntuforums.org/showthread.php?t=159661
    *nat
    :PREROUTING ACCEPT [163:50538]
    :POSTROUTING ACCEPT [40:2451]
    :OUTPUT ACCEPT [40:2451]
    COMMIT
    *filter
    :INPUT ACCEPT [0:0]
    :FORWARD ACCEPT [0:0]
    :OUTPUT ACCEPT [0:0]
    :FIREWALL - [0:0]
    :TRUSTED - [0:0]
    -A INPUT -j FIREWALL
    -A FORWARD -j DROP
    -A FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT
    -A FIREWALL -i lo -j ACCEPT
    -A FIREWALL -j TRUSTED
    -A FIREWALL -j DROP
    # put your own exceptions here, like so (replacing <tcp/udp> with either "tcp" or
    # "udp" -- minus the quotes -- and <port number> with the port you'd like to open):
    # -A TRUSTED -p <tcp/udp> -m <tcp/udp> --dport <port number> -j ACCEPT
    COMMIT
    Of course, there are benefits to keeping the rules in a script. For instance, you could then easily set the default iptables rules, allow all traffic, etc. Plus, some firewall-related things (such as the various echo commands in the scripts you provided) cannot (to my knowledge) be done by iptables alone.
    If you already have a script that sets up the rules you would like to use, you can save yourself the hassle of creating a rules file by following the directions outlined here.
    Last edited by ssjlegendx (2008-08-06 20:17:00)

  • Mac Mini won't get past the apple startup screen

    Hi,
    Just returned from the long weekend and tried to boot up my mac mini. It seems it doesn't want to get past the apple startup screen and the icon on the bottom just keeps spinning.
    Any ideas?
    Thanks

    can you boot into _*safe mode*_ ?
    ( *click on image to enlarge* )
    JGG

  • Upgraded my iphone 4S to 8.0.2 and it won't go past the Hello startup screen or accept my Apple ID Sign in!!! Help!!! What do I do to fix this??

    Upgraded my iphone 4S to 8.0.2 and it won't go past the Hello startup screen or accept my Apple ID Sign in!!! It just restarts itself!!!
    Help!!! What do I do to fix this??

    I doubt that your data have been lost, the hard drive should be fine. Too bad that you're going to sell it, you could have used the hard drive in an enclosure to back up your new computer to. Please remember to make frequent backups/clones, I use SuperDuper! and it works perfectly. I have used it to re-clone a drive from the external when things have gone bad, you can also boot from a SuperDuper! clone.
    Anyway, let us know how things go, I'm pretty sure your drive will be fine.

  • Macbook pro ( v 10.6.2, 2.53 GHz) iSight green light constantly on from startup (even before the grey startup screen).

    The iSight green light seems to always be turned on on my macbook pro. I've tried rebooting, but the light comes one even before the grey startup screen comes up.  The camera works fine in Photobooth etc, full picture, unlike all of the other posts. I already reset PRAM, and it didn't work. The laptop was recently refurbished. Thanks! Any help would be appreciated.

    See this article. 
    I don't think it's a RAM problem.  It's really a corrupted file or a damaged hard drive. 

  • HT204032 Does the non-Retina screen MacBook Pro have the ability to initiate Power Nap?

    I've seen that the Retina screen MacBook Pros can use Power Nap from Apple's WWDC keynote but can the non-Retina screen MacBook Pros do that too? It has the same processor and close to the same RAM. Or is it because the Retina screen MacBook Pros have flash storage that they can do Power Nap? Thanks

    From http://www.apple.com/osx/specs/ this is what is officially supported:

Maybe you are looking for