Walmart CLI, After Being Declined On the Automated System!

Im gardening now and after reading threads about CLI for Walmart I decided to try my luck. I've had my card since 6/15 and it was initially approved for 600.00, called a couple weeks later and requested an increase to $4,000 and yes!!! So tonight while I didn't hold out much hope, it had only been a little over a month since the last increase. I first called the automated line and they said sorry the account was not eligible now. Then I called Credit solutions and spoke to a human, I asked for 2,000 increase, put me on hold then, congrats, my new limit is 6,000! Definitely call in for your request for increases!

fordguy89 wrote:
Good job I just did the same Friday, and got mine doubled! unfortunately having a huge Walmart limit has nothing to do with getting an invitation for the MasterCard that was the only reason I kept trying to get increases. I really don't have a use to go over 1500 bucks in that store ever ever everThere is no way that I will use $6,000 either, absolutely not. I do like the assistance that it will provide with my over all utilization with the credit bureaus. I have grown to appreciate Walmart and have recently used the 0 internet financing for electronics! Thanks!

Similar Messages

Creative Zen's clock gets reset after being plugged into the w

I bought the wall recharger for my Creative Zen 8 GB, as I had another MP3 player (SanDisk Sansa e260) die mysteriously after being plugged into the computer's USB port.
The only complaint I have is that if I leave the Zen plugged in, after it finishes recharging, the screen goes blank and when I unplug it and turn it on, the clock and calendar are reset to their default (March 7, 2008).
I am on a Vista Home Premium computer (no service pack). I have the latest the firmware on the player and use the latest version of Media Explorer.
Does this happen to anyone else who uses the wall charger?

Hello, I read your post & am replying to it because I too am having a clock syncronization issue but mine is not related to plugging it into a wall charger. My date AND time resets too to April 7, 2008 for some reason. I reset it yesterday to the correct date and time for yesterday (May 8, 2008) and now it is reset back to the previous date I mentioned. It couldn't even keep the time/date accurate for 24 hours! My battery was already charged however several days ago and is no where near being finished (it says half full). My firmware version is .2.0.
Anyhow I know this doesn't help you at all, but at least you're not alone on this issue...mine doesn't originate with charging it though...maybe that will help you at the very least.
Drew

IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

iPhone music will not respond to Play button after being paused.
The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

How do I make drag sources disappear after being moved to the correct drop target in Captivate 7

How do I make drag sources disappear after being moved to the correct drop target in Captivate 7

Thank you so much. I could have searched a very long time and not found that. It is counter-intuitive to me that I would set the behavior for the drag source on the properties for the drop target.

I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.

I have an iPhone 4s. After I updated to the Operating System 7, I cannot open the WiFi. Please help.

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

My ipod is not syncing after I have reinstalled the operating system on my machine.

My ipod is not syncing after I have reinstalled the operating system on my windows pc.

2.2.1 is not the latest available for any ipod touch.
Is yours the original ipod touch?
If so then:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

HT201412 My iPhone 4S stops charging a few seconds after being connected to the USB, it will, however, charge when it is switched off.

iPhone stops charging a few seconds after being connected to a USB slot, it will charge when switched off is I think it must be a software issue.

HAve you tried using a different power chord? If the power chord is not the issue, it could be the power supply inside your mac.

My iPhone 4S is freezing shortly after being disconnected from the charger and/or while trying to unlock my phone.

Why is my 3 day old iPhone 4S freezing after being disconnected from a power source and/or while trying to unlock the phone?

hold down the power/home key together for 10 to 15 secs or until you see the apple logo and then release then wait for your phone to boot back up.

WSUS - Parent server will not purge computers from the unassigned group after being moved on the downstream servers.

I need some help please. I have read every forum I can think of and google for months and can not find a solution.
I have 1 Primary WSUS Server and 3 Replica servers. Often times systems are placed into the unassigned group on the replica servers and then after a syncronization they will show up on the primary server in the unassigned group.
The problem is that when I log into a replica server and move these computers to another group, they never get moved on the primary server. They will constantly remain on the primary server in the unassigned group. I know this is probably something simple that I have overlooked in the documentation, but believe me I have tried everything that I can come up with. Please help! :)

> So when you move them into the appropriate group... this is not remembered on the server.
It is... but only until the *client* (which believe that it is authoritative for its group memberships -- as a result of the policy configuation) tells the server otherwise. Then the server has the group membership as reported by the client machine.
> I thought that when the client went to contact the server again and said I'm in this group (which happens to not exist on the server)
If the *group* does not exist on the server, the client will be seen only in "All Computers". The group name reported by the client is still stored in the database as an attribute of the client, but because the console is not configured to display that group, the client computer does not appear in any group except "All Computers".
> the server would then say, yes you are; however the admin has told me that you really belong to this other group.
No, the server never assumes it is authoritative for anything coming from the client. The WUAgent is the authoritative source for everything in the WSUS environment (except Update Approvals <g>). If the WUAgent is not configured to use "policy-based groups", then the WUAgent will query the WSUS Server to determine which group(s) the client belongs to, and if the server is configured in Options | Computers to "Use the console... to assign groups", then it will answer with the currently stored group name(s). However, if the WUAgent is given that information via policy, then it doesn't ask for anything, it *tells* the server what the facts are, and those facts are used to update the WSUS database.
> On the downstream server they remain in the appropriate groups after I move them.
> Its only on the upstream server that I have this problem.
There are several configuration parameters that could be contributing to this. We should start by verifying the correct settings for all of them.
1. Options | Computers on the replica server is set to "Use group policy".
2. Options | Computers on the upstream server is set to "Use group policy".
3. The policy configured group exists on the upstream server.
4. The policy configured group has replicated to the replica server.
5. The policy has been properly applied to the client system.
6. The client appears in the correct group(s) on the replica server, according to the group(s) configured in the policy.
7. The replica server has synchronized successfully with the upstream server since the client system last *reported* to the replica.
8. The upstream server has "Reporting Rollup" enabled.
9. Sufficient time has passed to allow the upstream server to complete the asynchronous updating of the reporting data from the replica server.
If all of the above is correct, and the client system still appears in "Unassigned Computers" on the upstream server, then we'll have something that needs further investigation. Most likely, though, is that one of those items enumerated is not copasetic and is interfering with the correct recording of the client system's correct group membership. Once corrected, the upstream server will properly reflect the actual group memberhips as configured in policy.
Lawrence Garvin, M.S., MCITP:EA, MCDBA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)

After awakening from standby the whole system becomes awfully slow

When I wake up my system from standby the system is very slow. It seems that it pauses once every second. Even the activity monitor responds that way but doesn't show any further information. Only a reboot of the system helps.
Any idea to solve this problem?
Thanks in advance
Wolfgang

Hello,
I installed update 10.7.1 and the system is still very slow after waking up from standby mode. It seems it does get even slower after another standby period... Restarting still helps - the system is then back to normal and running well.
What I experienced yesterday is that iTunes has little glitches in the audio output, when I do memory/HD/CPU intensive things like browsing my Aperture image library back and forth. But CPU utilization is not at 100% for both cores. Those glitches are audible after fresh restart of the Mac and are much longer and ugly after waking it up.
I have an early iMac 24" with 2,8gig and 4 GB of RAM.
Looks like we'll have to wait for 10.7.2 after all?
Wolfgang, has your problem been resolved with 10.7.1?
Regards,
Alex

Calling an RFC without the code being present on the destination system

Hi All,
Here is my problem.
I want to execute a piece of code on a system from a program currently running on another system,
get the data and return back.
E.G. I am having a subroutine on development system. Let's say there is a select query inside the subroutine to get PARTNER from BUT000 based on certain parameters. The program should call an RFC get the data for the select query from the Production system and return the result back to the development system.
Please note : Here, I don't want to write the same piece of code on the production system.
<b>Is there any function module for the same or any idea on how to go about it.</b>
<b>Helpful answers would be rewarded.</b>
Regards,
Amit Mishra

Hai
Sending system side(SEND--800)
Create function module by using Tcode SE37 or SE80
goto attributes select remote function
activate
Receiving system side(RECE--000)
goto Tcode SM59
here select the R/3 Connections-->click on Create Button
give RFC Desstination : TESTRFC
     Connection Type : 3 for Connecting two systems
     Description      : Some meaningful Description
Press enter
give Target system Name : SEND
          Language      : EN
          Client        : 800
          user Name     : sapuser
          Password      : xxxxxx
save this connections & click on test connections(f8)
                      & Remote logon(f7)---> it will open a session
                        with client 800 that is your sending system
                        then only your RFC is correct
create a report in SE38 Tcode
data : c1 type i.
data : itab like mara occurs 0 with header line.
call function 'ZRFCFM' destination 'TESTRFC' --->Function Module 'ZRFCFM' your just create at Sending system
     exporting
     importing
     exceptions.
Thanks & regards
Sreeni

Call is disconnected after being transferred by the AA SPA 400

I have 2 groups set up in the AA to transfer to different groups ie "Accounts" or "Production". These all worked originally, but now they seem to have stopped working. Callers dial in and press "13" as per the prompts, then the AA message tells them to wait while the call is transferred, and then the call is disconnected.
This only happens for one of the prompts, the other one is fine. As i said this all worked fine originall, and no settings have been changed.....
Any ideas / help / suggestions greatly appreciated.
System is SPA9000, SPA400, SPA942 x 3

After having searched through this and a number of other forums I am amazed that no one has come across and understands the true reason this is happening. The other posts do offer some insight and good suggestions but no one has realized the true underlying problem. Apparently the AA, no mater what dial plan you use, will forward any partially dialed portion of the numbers that match the list. So even if you specifically limit the acceptable numbers to only the extensions on your system you can still get a partial result passed on from the AA which does not have a valid extension on your system.
For Example:
DP1 = (120|102|103|152|100|9|<0:100>|<*8:vmm4>)
AA Script 1 =
<aa>
<form id="dt" type="menu"><audio src="prompt5" bargein="T"/><noinput timeout="5" repeat="T"/><dialplan src="dp1"/>
<nomatch repeat="F"><audio src="prompt3" bargein="T"/></nomatch>
<match><case input="9"><audio src="prompt8" bargein="F"/></case>
<default><audio src="prompt2"/><xfer name="ext" target="$input"/></default>
</match>
</form>
</aa>
You would think this would be sufficient to limit inbound calls to just the extensions listed in the dial plan. Not so. The caller can dial any part of the listed extensions (1,10,12,15,*...) and the call will still be transferred and subsequently dropped. I tried every possible combination of dial plan settings including specifically rejecting (which you should not have to do) everything other then the desired combinations. Problem is if you try to reject any subset of the valid combinations it interferes with them and they get rejected to. The real problem here is in that how the dial plan is being processed allows these invalid partial number through. Believe it or not this happens more then you think. For whatever reason a digit is not heard or does not get registered will cause this to happen. Adjusting the DTMF settings does improve things in most cases but does not solve the issue. Problem is that any number passed on by the AA that does not translate to a valid destination will get dropped.
After much trial and tribulation I have come up with a way using the AA script to eliminate any and all none desired digit combinations to prevent anything from getting transferred by the AA that will get dropped. It is a work around but it is effective and reliable. Solution is simple. Use the AA script to take specific action on only the desired responses. Everything else goes to the default which could play an "invalid..." message or other action. Here's how it looks:
DP1 = (0S0|*8S0|xxxS0)
AA Script 1 =
<aa>
<form id="aadpw" type="menu"><audio src="prompt5" bargein="T"/><noinput timeout="5" repeat="T"/><dialplan src="dp1"/>
<nomatch repeat="F"><audio src="prompt3" bargein="T"/></nomatch>
<match>
<case input="*8"><audio src="prompt2"/><xfer name="ext" target="vmm4"/></case>
<case input="0"><audio src="prompt2"/><xfer name="ext" target="100"/></case>
<case input="100"><audio src="prompt2"/><xfer name="ext" target="$input"/></case>
<case input="102"><audio src="prompt2"/><xfer name="ext" target="$input"/></case>
<case input="103"><audio src="prompt2"/><xfer name="ext" target="$input"/></case>
<case input="120"><audio src="prompt2"/><xfer name="ext" target="$input"/></case>
<case input="152"><audio src="prompt2"/><xfer name="ext" target="$input"/></case>
<default><audio src="prompt3" bargein="T"/></default>
</match>
</form>
</aa>
It is a little like using a sledge hammer to pound in a tack but it works. It's the only thing I was able to come up with that does. Oh, and by the way you may notice the case for "*8". This allows transfer from and outside line to the voice mail manager ("vmm4") on line 4. You can modify the dial plan and AA script for any sequence you want. The case for "0" is there to allow outside callers to press "0" and get transferred to whatever valid extension or hunt group you wish to designate.
Hope this offers a little more insight into what was really happening. Let me know if anyone comes up with a better way to do this.

My iPhone 4S will no longer stay connected to my home wifi after being reset at the Apple store. Help!

After I took my iPhone to the Apple store for a completely different problem, which they fixed, my wifi will no longer recognise my home wifi like it used to.

Hey TSWinchester,
Thanks for the question, and welcome to Apple Support Communities.
I'm glad to hear my colleagues at the Apple Store were able to resolve your original issue. Let's see if we can figure out what is going on with your iPhone connecting to Wi-Fi.
Is your Wi-Fi network appearing in the "Choose a Network" section under Settings > Wi-Fi? If not, please see the following article for troubleshooting steps:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Also, you may need to confirm that your Wi-Fi network is not configured to be hidden. For more information on password-protected networks, and hidden networks, see this article:
iOS: Connecting to Wi-Fi
http://support.apple.com/kb/HT5569
Thanks,
Matt M.

Win 8.1 Metro apps re-installing after being removed from the reference image

Scenario:
MDT 2013 - Build reference image for Win 8.1 on hyper-v executing the following commands removing all metro apps.
Powershell.exe -Command "&{Get-appxPackage -AllUsers | Remove-AppxPackage -ErrorAction SilentlyContinue}"Powershell.exe -Command "&{Get-AppXProvisionedPackage -online | Remove-AppxProvisionedPackage -online -ErrorAction SilentlyContinue}"
Install windows updates and perform sysprep and capture wim task
Import Wim into Sccm 2012 r2 and deploy with standard mdt task
Problem:
After deployment all Metro apps are reinstalled or reinstalling.
Notes: Setting Copyprofile True is ignored and have tried various methods and it is always ignored.
If I use the wim from sources\install.wim and I either dism /remove-appx... or powershell in win PE get-appx -path | Remove-appx...
If that wim is modified and used then it deploys without the Metro apps but it doesnt have any windows updates. If I use that wim to build the reference image it will have no metro apps but after capture and deploy through sccm the metro apps start
to re-install.
Below is the unattend.xml
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
<ProductKey>
<Key></Key>
</ProductKey>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username></Username>
<Domain></Domain>
<Password></Password>
</Credentials>
<JoinDomain></JoinDomain>
<JoinWorkgroup></JoinWorkgroup>
<MachineObjectOU></MachineObjectOU>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName></ComputerName>
<ProductKey></ProductKey>
<RegisteredOrganization></RegisteredOrganization>
<RegisteredOwner></RegisteredOwner>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
<TimeZone>Pacific Standard Time</TimeZone>
<CopyProfile>true</CopyProfile>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.microsoft.com/</Home_Page>
<DisableWelcomePage>true</DisableWelcomePage>
<DisableFirstRunWizard>false</DisableFirstRunWizard>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>QQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization></RegisteredOrganization>
<RegisteredOwner></RegisteredOwner>
<TimeZone></TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog://sccm1/deploymentshare$/operating systems/windows 8.1 enterprise x64.1/sources/install_windows 8.1 enterprise.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Yes as I've removed it both via get-appxpackages | Remove-appxpackages and via the dism commands.
I have found also that wasn't getting a good sysprep. Problems with copy profile lead me to try doing a manual sysprep where I found I was getting failures in my sysprep. The problem was that I was disabling the windows store service in my reference
image.
I was very hopeful that was going to be the resolution but it appears that is not the case.
2014-09-26 07:15:03, Error SYSPRP WSLicenseCleanUpState failed with hr=c0020017
2014-09-26 07:15:03, Error [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'WSLicenseCleanUpState' from C:\Windows\System32\wsclient.dll; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP ActionPlatform::ExecuteAction: Error in executing action; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP ActionPlatform::ExecuteActionList: Error in execute actions; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP SysprepSession::Execute: Error in executing actions from C:\Windows\System32\Sysprep\ActionFiles\Generalize.xml; dwRet = 0xc0020017
2014-09-26 07:15:03, Error SYSPRP RunPlatformActions:Failed while executing SysprepSession actions; dwRet = 0xc0020017
2014-09-26 07:15:03, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 0xc0020017
2014-09-26 07:15:03, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep generalize internal providers; hr = 0xc0020017

Drive with Offline Files folder not available for 2 minutes after being connected to the network.

Hi
We use Windows SP1 with one folder from the User HomeDirectory set to be available offline.
The problem we encounter is that when going from Offline to Online via VPN, there is a 2 minutes delay for the drive where the offline folder is located to be available again. Other drives mapped at VPN connection time are available immediately
after we applied KB2705233. Only the drive that contains the folder that we make available offline has this delay issue.
I found out KB2663418 but it does not apply as we have Windows 7 SP1. However the symptoms are the same:
< This issue occurs because the client-side caching (CSC) interface tries to reconnect to the source before the network is actually available. This behavior causes the SMB cache to enter a negative state. In this situation, the CSC interface tries to
reconnect to the source on the next 2-minute retry interval.>
Does one know how to force a check of the connectivity or if there is another fix available ?
thanks in advance
bruno

Hi,
Why KB2663418 didn't applied to your computer? It applied to
Windows 7 Service Pack 1, when used with:
Windows 7 Enterprise
Windows 7 Professional
Windows 7 Ultimate
Did you use Windows 7 Home Basic or Home Premium? However, Windows 7 Home Basic and Premium does not support Offline Files.
Thus please try that hotfix.
Karen Hu
TechNet Community Support

Walmart CLI, After Being Declined On the Automated System!

Similar Messages

Maybe you are looking for