WAM( work and Asset Management)

Hi All,
Can anyone share the steps to cluster WAM on OAS10gR2
Regards,
Ishar

Hi,
1. Is ORACLE WAM the same as ORACLE UTILITIES WAM or are they from different product suites? I have searched the metalink and forums extensively and have not been able to make a determination.Both are the same.
2. Where may I locate technical information regarding ORACLE WAM such as recommended software components, architecture, hardware, Mobile Workforce Management coupled with GIS(geographic information systems) integration?Note: 784232.1 - Where Can I Find The Hardware Requirement For Wam 1.8 Applicaton Server?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=784232.1
Regards,
Hussein

Similar Messages

ORACLE Work and Asset Management

Hi,
Can I upgrade WAM V 1.7.15.2.3 to 1.8 directly ? If yes, what document and Patch# I need to apply? If no then what would be next patch?
Please let me know which note would be helpful.
Thanks

Hi,
Please see (Note: 811550.1 - How to upgrade WAM on FRS (Form and Report Server, Resin) environment to Full OAS (Oracle Application Server 10g Release 2, non-Resin) environment).
You may also review these docs.
Note: 942124.1 - What are the OAS patches need to be applied before upgrading the WAM patch 1.8.1.1
Note: 850133.1 - Oracle Utilities Work Asset Management v1.8.1
Regards,
Hussein

Unable to access WLS_FORMS for Work and asset management via weblogic

**Hi All,**
**I am in the process of installing Oracle WAM 10.3.4 on Windows x86 64bit, Oracle 11.2.0.1 database Java 1.6.0_23.**
**I have already installed everything and have started the WLS_FORMS server from weblogic console. However when I am trying to access the forms website - I am just getting 404.**
**Weblogic installed in : C:\SPL\Oracle\middleware\wlserver1034**
**Instance in : C:\SPL\Oracle\middleware\wam_inst1**
**server in : C:\SPL\Oracle\middleware\CCHDEV1**
**here is my config.properties for WAM:**
root_path=C:/SPL/WAMCCH/synergencchdev1/sia/
app_server=http://ldelara-ph.splwg.com:9001/cchdev1/
help_default_page=webhelp/wwhelp/wwhimpl/js/html/wwhelp.htm?context=Overview&topic=uo_whatsnew
mail_server=mail.server.com
asp_url=http://ldelara-ph.splwg.com:8001/
init_integration_table=true
chart_xml_path=C:/SPL/WAMCCH/synergencchdev1/sia/charts/data
max_chart_records=20000
forms_servlet=frmservlet?config=wam
forms_server=http://ldelara-ph.splwg.com:9001/forms/
forms_report_service_name=RptSvr_LDELARA-PH_wam_inst1
forms_report_server_url=http://ldelara-ph.splwg.com:8888/reports/rwservlet
forms_tnsname=cchdev1
report_cgicmd_key=report_cgicmd_key1
debug_session_level=INFO
debug_session_filter=synergen
debug_session_method_filter=
application=synergen
datasource=synergen
default_locale=en-us
charset_to_use=UTF-8
file_prefix=documents
log_requests=false
move_requests_to_history=false
home_page_url=Home?tgt=Main
logon_page_url=Logon?tgt=Main
logon_error_url=Logon?tgt=Failure
logoff_page_url=Logon?tgt=Main
ssoMode=false
event_queue_module=EventQueue
event_queue_page=Results
default_username=synergenguest
queue_retries=1
auto_logon_expire=30
max_user_windows=3
db_proxy_session_helper_class=synergen.db.OracleAsDbProxySessionHelper
sia_integration_url=http://ldelara-ph.splwg.com:9001/cchdev1/synergen/
repair_revoked_metadata_age_in_days = 30
WLS_FORMS.out
the JEE version.>
*************** Starting SIA Application Server ***************
Configuring log4j...
configuration file to be used = C:\SPL\WAMCCH\synergen\CCHDEVwaminst\sia\WEB-INF\classes\wam-log4j.properties
Finished configuring log4j...
************* Started loading config properties *************
Listing config properties
forms_report_server_url=http://ldelara-ph.splwg.com:9001/reports/rwservlet
forms_tnsname=WLS_FORMS
asp_url=http://ldelara-ph.splwg.com:9001/
log_requests=false
forms_servlet=frmservlet?config=wam
default_locale=en-us
root_path=C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/
logon_error_url=Logon?tgt=Failure
file_prefix=documents
queue_retries=1
help_default_page=webhelp/wwhelp/wwhimpl/js/html/wwhelp.htm?context=Overview&topic=uo_whatsnew
debug_session_method_filter=
db_proxy_session_helper_class=synergen.db.OracleAsDbProxySessionHelper
ssoMode=false
home_page_url=Home?tgt=Main
auto_logon_expire=30
report_cgicmd_key=report_cgicmd_key1
forms_server=http://ldelara-ph.splwg.com:9001/forms/
init_integration_table=true
logon_page_url=Logon?tgt=Main
app_server=http://ldelara-ph.splwg.com:9001/wam_inst1/
repair_revoked_metadata_age_in_days=30
default_username=synergenguest
forms_report_service_name=RptSvr_LDELARA-PH_wam_inst1
application=synergen
event_queue_page=Results
charset_to_use=UTF-8
event_queue_module=EventQueue
move_requests_to_history=false
debug_session_filter=synergen
datasource=synergen
logoff_page_url=Logon?tgt=Main
mail_server=mail.server.com
sia_integration_url=http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
debug_session_level=INFO
chart_xml_path=C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/charts/data/
max_user_windows=3
max_chart_records=20000
Setting derived paths
xmlPath = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/xml/
logPath = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/logs/
debugPath = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/debug/
Chart Directory = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/charts/
Documents Path = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/documents/
Temporary Documents Path = C:/SPL/WAMCCH/synergen/CCHDEVwaminst/sia/tempdocs/
Loading converted properties
************* Completed loading config properties *************
Database Connection Factory Settings
Accessing MetaData from Database
Database jdbc:oracle:thin:@ldelara-ph.splwg.com:1521:CCHDEV
JDBC Driver Oracle JDBC driver/11.2.0.2.0
Database Name/Version: Oracle/Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Installation Parameters
12.06.12.15:47:54.661 root
[INFO] SQL Executed: select key_name, key_value from SA_INSTALLATION_PARAMETERS where key_name in ('PHONE_NUMBER_FORMAT', 'SCHEDULING TOTAL EST HRS DISP', 'ENABLE PASSWORD RESET')
12.06.12.15:47:55.124 root
Starting DatePrefereneces.initDatePreferences
12.06.12.15:47:55.125 root
[INFO] SQL Executed: select username, java_long_date_mask, oracle_long_date_mask, long_date_delimiter, java_short_date_mask, oracle_short_date_mask, short_date_delimiter, java_time_mask, oracle_time_mask, time_delimiter, skin, show_component_desc, short_date_mask_no from sv_preference where username in ('DEFAULT', 'DEFAULT')
12.06.12.15:47:55.283 root
Created session 13547800752830 at Thu Dec 06 15:47:55 SGT 2012
12.06.12.15:47:55.283 root
Session 13547800752830 is currently using username SYNERGENGUEST
Enable password reset parameter is false
12.06.12.15:47:55.371 db.DatabaseConnect
[INFO] SQL Executed:select key_value from sa_installation_parameters where key_name = 'CHART THUMBNAIL GENERATION'
Scheduling Total/Estimate Display is ON
12.06.12.15:47:55.373 db.DatabaseConnect
[INFO] SQL Executed:select key_name from sa_installation_parameters where key_value in ('SERVICE PACK', 'SERVICE PACK1', 'MAJOR RELEASE')and last_update_date in (select max(last_update_date) from sa_installation_parameters where key_value in ('SERVICE PACK', 'SERVICE PACK1', 'MAJOR RELEASE'))
Product Version from Installation Parameters is 1.9.0.3.0
SA_INTERNET_INTEGRATION initialization
Deleting integration records for http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
12.06.12.15:47:55.374 db.DatabaseConnect
[INFO] SQL Executed:delete from sa_internet_integration where sia_url='http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/'
SIA URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
Forms Server URL = http://ldelara-ph.splwg.com:9001/forms/
Home Page URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/Home?tgt=Main
Event Queue Administration URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/EventQueue?tgt=Results
Event Queue Servlet URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/EventServlet
SIA Application Version = v1.9.0.3.201106221519
SIA URL = http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
Timestamp = Thu Dec 06 15:47:55 SGT 2012
Deleting all integration records
12.06.12.15:47:55.382 db.DatabaseConnect
[INFO] SQL Executed:delete from sa_internet_integration
12.06.12.15:47:55.384 db.DatabaseConnect
[INFO] SQL Executed:insert into sa_internet_integration (home_page_url, event_queue_admin_url, process_queue_url, sia_version, sia_url, forms_server_url, timestamp) select ?, ?, ?, ?, ?, ?, ? from dual where 0 = (select count(*) from sa_internet_integration where forms_server_url = ? and sia_url = ?)
Completed initialization of integration table for http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/
12.06.12.15:47:55.396 root
Created session 13547800753961 at Thu Dec 06 15:47:55 SGT 2012
12.06.12.15:47:55.396 root
Session 13547800753961 is currently using username SYNERGENGUEST
12.06.12.15:47:55.397 db.DatabaseConnect
[INFO] SQL Executed:select sia_url from sa_internet_integration where timestamp in (select max(timestamp) from sa_internet_integration)
12.06.12.15:47:55.398 net.EventManager
Current server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
12.06.12.15:47:55.398 net.EventManager
Primary server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
XT_EVENT_QUEUE Cleanup
12.06.12.15:47:55.399 db.DatabaseConnect
[INFO] SQL Executed:select status, status_date, status_message from xt_event_queue where status in ('processing')
Initializing ApplicationMapData
12.06.12.15:47:55.476 db.DatabaseConnect
[INFO] SQL Executed:SELECT lower(r.primekey_name_1), lower(r.primekey_name_2), lower(r.primekey_name_3), lower(r.primekey_name_4), r.architecture_ind, r.form_name, r.sia_module, r.form_function FROM SA_FORM_NAMES r order by r.form_name
Loading Named Query Cache...
12.06.12.15:47:55.578 util.AbstractGeneralCache
Initializing the NamedQueryInfoCache.
Begin loading Table Metadata Cache...
12.06.12.15:47:55.585 db.TableMetaDataCache
Initializing the TableMetaData cache.
Loaded metadata for 316 tables/views in 2156 milliseconds.
Initializing Field MetaData Cache
12.06.12.15:47:57.745 util.AbstractGeneralCache
Initializing the FieldMetaDataCache cache.
Loading Labels/Words Cache
Strict English translations: false
12.06.12.15:47:57.753 db.DatabaseConnect
[INFO] SQL Executed:select field_name, locale_code, is_db_field, label, short_label, extended_label, hint from xt_application_labels
Initializing UDF Attributes Cache
12.06.12.15:47:57.758 util.AbstractGeneralCache
Initializing the UdfAttributesCache cache.
Begin loading Group Element Metadata Cache...
12.06.12.15:47:57.766 util.AbstractGeneralCache
Initializing the MetaDataGroupElementCache.
12.06.12.15:47:57.942 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the XT_RESP_PAGE_RESTRICTIONS column name RESTRICT_INSERT.
12.06.12.15:47:57.942 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the XT_RESP_PAGE_RESTRICTIONS column name RESTRICT_UPDATE.
12.06.12.15:47:57.942 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the XT_RESP_PAGE_RESTRICTIONS column name RESTRICT_DELETE.
12.06.12.15:47:58.515 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the SA_USER_PROFILE column name CUSTOMER_ID.
12.06.12.15:47:58.743 util.AbstractGeneralCache
No corresponding METADATA_GROUP_ELEMENT metadata was found for the SA_SERVICE_REQUEST column name ESTIMATE_TOTAL.
Loaded metadata for 258 metadata groups in 1071 milliseconds.
*************** Completed SIA Application Startup ***************
12.06.12.15:47:58.848 root
Event Servlet checking primary SIA server before attempting event queue processing
12.06.12.15:47:58.848 root
Created session 13547800788482 at Thu Dec 06 15:47:58 SGT 2012
12.06.12.15:47:58.848 root
Session 13547800788482 is currently using username SYNERGENGUEST
12.06.12.15:47:58.848 db.DatabaseConnect
[INFO] SQL Executed:select sia_url from sa_internet_integration where timestamp in (select max(timestamp) from sa_internet_integration)
12.06.12.15:47:58.849 net.EventManager
Current server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
12.06.12.15:47:58.849 net.EventManager
Primary server is "http://ldelara-ph.splwg.com:9001/wam_inst1/synergen/".
12.06.12.15:47:58.850 root
Processing 'pending' event queue records
12.06.12.15:47:58.850 root
Created session 13547800788503 at Thu Dec 06 15:47:58 SGT 2012
12.06.12.15:47:58.851 root
Session 13547800788503 is currently using username SYNERGENGUEST
12.06.12.15:47:58.852 db.DatabaseConnect
[INFO] SQL Executed:select event_seq_no, event_type, event_title, status, status_date, status_message, event_interval, next_event_date, originator, recipients_to, recipients_cc, recipients_bcc, message_subject, content_type, request_xml, content, content_url, last_retry, read_receipt_ind, importance_ind, attachment_filename, last_update_date, last_update_user, created_date, created_by from xt_event_queue where status in ('pending')
Starting FileClerk...
FileClerk complete. 0 files deleted in 56.0 milliseconds.
<12 6, 12 3:48:01 PM SGT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<12 6, 12 3:48:01 PM SGT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<12 6, 12 3:48:01 PM SGT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of cluster_forms.>
<12 6, 12 3:48:31 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<12 6, 12 3:48:31 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<12 6, 12 3:48:31 PM SGT> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<12 6, 12 3:48:31 PM SGT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.186.252.165:9001 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<12 6, 12 3:48:31 PM SGT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "WLS_FORMS" for domain "ClassicDomain" running in Production Mode>
<12 6, 12 3:48:32 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<12 6, 12 3:48:32 PM SGT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Any suggestions how I can fix this? I am lost as there are no errors on WLS_FORMS.out

Hi Kal,
thanks for your reply, but I apologize for the Newbie question ( fairly new at weblogic) but from which tab can I find/change initial connect value?
thanks,
Lui

Work and Asset Management User Guide

Hi All,
I am very new to Oracle Utilities WAM and would like to go through the user guide of this application.
I dont have the software installed and hence have no access to the online help.
Please send the PDF file of the Oracle Utilities WAM user's guide or let me know from where i can download the same.
Its very urgent, so quick replies will be highly appreciated.
Thanks and Regards,
Rajani

the default user is synergen and the default password if not changed is password
userid: synergen
password : password
Thanks

Using LAM (Lease And Asset Management Module) in CRM 4.0 - CRM2007

Hi, use anybody the LAM with CRM 4.0 im production?
if yes, with business you do and which are the leased objects?
and made a update form CRM 4.0 to CRM2007
how does it work?
txs a lot

hi Reiner
for the changes that are impacted from CRM 4 to CRM 7.0 just go through this link
https://websmp109.sap-ag.de/~form/sapnet
use your OSS id to access it
an dor leas and asset managment go through the link
http://help.sap.com/saphelp_crm60/helpdata/en/dd/6e133b3f618442e10000000a114084/frameset.htm
you will get each and every detail,that what leased objects are there and what is the differemce we came across from CRM 4 to 6.0
best regards
ashish

Does anyone use Framwork POs for WBS and Asset management.

We have had issues before with trying to use Framework POs for Assets. I wanted to know, does anyone out there use the Framework PO for the creation of Assets with charges going to WBS elements? Do you track service charges as well as material charges that are purchsed for Assets?

For PO, WBS, Asset frame work below is the sample
Create WBS which manage AUC
Example you will create a clinic,
Create Project - [Project Clinic]
Create WBS under the Project Clinic - [Clinic Expense]
Create AUC under WBS Clinic Expense - [Clinic under Construction]
Let say you purchase Paint for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 1000 USD)
Let say you purchase Wood for the clinic - create a PO and use account assignment WBS [Clinic Expense] (e.g. 2000 USD)
During month end you can settle the amount to AUC (tcocde CJ88 - Settlement type - Automatic)
All charges to WBS will go to AUC
Once construction of clinic is finished and is ready to use, you need to settle all the amount from WBS to AUC (through settlement)
Then create Fixed Asset [Clinic Building]
Then settele the AUC [Clinic under Construction] charges to Fixed Asset [Clinic Building] through CJ88 settlement type - Final settlement
Thanks!
Jhero

CS Mars, Cisco Works and Security Manager

If we wanted to get all three applications, do cisco bundle it into one package? Or does it have to be purchased separately?

do we need a NetFlow card or is the service implemented by default in Cat4500. Is MARS & CSM suitable solution for main configuring, incident monitoring and evaluation of ASA5520 & Cat4500?
Yes, you need WS-F4531= card (Netflow is not available in Cat IOS as a service/command), which works with Cat 4500 Sup IV/V.
MARS is a monitoring device, and CSM is a management device. You can get critical NBA (Network Behaviour Analysis) alerts from MARS, and from CSM you can get configuration backups/audit/bulk administration (of security devices only).
Hope that helps.

About WAM(work asset management).

hello gurus,
Please help me out in this topics,
1.what is WAM(work asset management)?
were we use this, what is the perpose, any matrial for this.
2. what is Timesheet?
3. what is implimention of project?
plz explain step by step implimention of a project in general.
4. what is lifecycle.
kindly give material for these topics, i will definately assign pts.
thanks in advance.
regards.
vishal.

Hi,
Please see your other thread.
ORACLE Work and Asset Management
Re: ORACLE Work and Asset Management
Regards,
Hussein

Business Content for SAP BW ,WAM work order ans asset management

Hi All,
where can i see the business content for sap work order and asset management. can i see it in help.sap.com
i tried but could not get . any url would be appreciated.
Regards
Srini

Thanks AHP for pointing out.
From BW help link as below
http://help.sap.com/saphelp_bw33/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
go to BI Content > Financials > Financial Accounting > Asset Asset Accounting
for Assets
go to BI Content > Financials > Controlling > Overhead Cost Controlling > Overhead orders
for Internal Orders
Hope this time it is fine.
Cheers
Anurag

Oracle Work & Asset Management(WAM) installation

Hi Gurus,
Please post steps to install Oracle WAM from scratch for test purpose.
or point me to any free instance of WAM where I could check the look and feel functionality of Oracle WAM.
Thanks
Srini

This is the forum for questions related to database upgrades - pl post in a more appropriate forum - locking this thread
Oracle Utilities Work and Asset Management

Asset Management and tracking using iOS?

Hi,
I would like to use iphones for asset management and tracking and am having a bit of difficulty finding what I am looking for. I bought delicious library 3 at home to see if it could track code39 or code128 but so far it doesn't work, and I can't seem turn off Amazon searching. Anyway, I also ran across iCody, which looked nice and even clz barry, but they all seem to be data entry only.
What I am looking for is an app/application set that can work in two ways:
1. Build a database (this could be manually if it needs to be) of asset items. I would then enter details about that item into the database.
2. Scan, view, and possibly edit the item by barcode using an iOS device.
Has anyone found something that will do this? I'm not real interested in demoing apps by buying them first
thanks

Hi Stephanie,
SAP Real Estate Management is made to manage space, room reservation, moves, lease administration and so on, while SAP Enterprise Management is used in a property management environment to manage repairs, maintenance and services. SAP Real Estate Management provides Usage and Architectural Master Data Object to display the portfolio, while SAP Enterprise Asset Management provides so called Functional Locations. In SAP Real Estate Management there is an option to automatically create and/or update Functional Locations in SAP Enterprise Asset Management and a BAdI to synchronize Fixture & Fittings on SAP Real Estate Management objects with entries in the Classification System in SAP Enterprise Asset Management. For more information please check the SAP Help Portal:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/27/07783b7cede50ae10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/62/0974404a6fcf62e10000000a155106/content.htm
Best regards,
Christian

Integrating barcode asset management and LR

I have discovered to my delight that you can integrate Lightroom and barcode based print asset management. This is a way to:
automate the printing of labels for images without any rekeying of information, and
automate the process of finding the image from which a print was made
Why do this? You may sell prints or just make them for your own pleasure. It is good practice to provide some labelling of prints so you (or the buyer) knows what they are looking at. It can be helpful to be able to quickly find the source image of a print. Of course you can just include the filename in the label and type it in to find the source image. But the labels produced look a bit messy with a sometimes arbitrary filename stuck in there. An option is to include a neat barcode on the label. You can then use your webcam to read the label and direclty insert the filename in the LR search field. Presto! Up pops the image from which the print was made.
Caveat: Apologies to Mac users, I have only worked this out on a PC. I'm sure there are substitutes for each of the things I've used.
What you need to do this [on a PC]:
Lightroom (LOL)
LR/Transporter (incredibly useful for many things)
Excel (optional but part of my workflow)
A way to print labels with barcodes. I use a cheap Brother label printer which comes with the P-Touch Editor software.
A webcam
Webcam barcode reader software. I use bcWebCam which is free
How I do it:
I'll sketch how I do it with the specific gear I have and then suggest how you may get by with other gear.
Simplest workflow:
Set up LR/Transporter to export a summary file from image exports that includes all the fields you may want on your label (including filename of course). Format for comma delimited a CSV file with a header line to define the exported fields. This is saved and reused as an export preset. Routlinely I can then select the images I am printing and export them to a dummy folder which I use for the purpose of transferring Image information.
I use my label printer software with a template that merges the CSV file data onto a label, with the filename printed as a QR barcode. I generally put one label directly on the print reverse and, if framed, another on the frame rear. With high quality art prints I only do the latter to avoid any possibility of problems of with the adhesive discolouring the paper obverse. Here's an example.
Having previously installed bcWebCam, if I need to find an image that needs a bit of a search (only likely if I've not worked on it recently), I load bcWebCam while LR is running, place my mouse cursor in the search field in the library view (having selected the root of my catalogue), and hold the print label in front of the web cam. Presto! bcWebCam inserts the filename in the search field and up pops the image in LR!
In reality, I use excel as an intermediary to read the LR/Transporter data and reformat some items. One reason is the GPS information exported by LR/Transporter has some weird characters in it and they need to be cleaned out. Characters with accents or umlauts also need some special treatment. Excel also lets me define how many of each label I want printed... The label printer software reads the excel file as a database and allows printing of the required number of labels.
If you are interested in this solution you are likely to have tens or hundreds of thousands of images in which case camera generated filenames will not be unique. I add a month and year in import and conversion to DNG into LR to ensure filenames are unique. There are a range of other work-arounds that may suit your workflow better. But remember, you need something that LR will find in a single search. It may be you create a unique identifier in a EXIF or IPTC field - this will work too... Some smart bunny may point out to me there is some foolproof automatic unique identifier for each image built into LR which can be accessed and exported but I am not aware of it. I guess image creation time (to the second) comes pretty close but I cannot see how to search on this from a search field entry...
Where you may need to find some workarounds:
If you are on a PC, the one thing that is not available on the net is the barcode label printer. In the past I used to print labels on multi-label sheets with a laser printer. It's not obvious to me how to translate the unique image identifier into a barcode for this approach but I'm sure there will be one out there. But I came to the conclusion that a dedicated "on demand" label printer would save a huge amount of messing around. I think the Brother model I use is about US$79 which doesn't exactly break any bank. And the continuous paper roll I use means labels end up about 2.5 cents a pop... What makes this or even the more capable models (with auto-cutters) such a great deal is the P-touch sofware which does do all the linking of database to label and info field to barcode. This is worth the price alone I reckon. There are other free and for-fee webcam barcode readers out there too; the one I've noted works for me...
This may sound pretty complex to set up. But the reality is, once export, database and print templates are in place, it's all automatic.

Hi,
Great use of LR/Transporter
The strange characters result from the fact that LR/Transporter outputs files with a UTF-8 encoding. You need to be able to read that so see them. Most applications can read UTF-8 nowadays.
Tim

Oracle eAM Enterprise Asset Management, Work Request Create Page Error

Dear All
I am facing this error on Oracle eAM Enterprise Asset Management, Work Request Create Page
oracle.apps.fnd.framework.OAException: java.lang.ArrayIndexOutOfBoundsException
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
     at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3247)
     at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3042)
     at OA.jspService(_OA.java:228)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:662)
## Detail 0 ##
java.lang.ArrayIndexOutOfBoundsException
java.lang.ArrayIndexOutOfBoundsException
----------------------------------------------------------------------------------------------

I am finding eAM to be pretty interesting in the asset intensive environment. My implementations in shopping mall, metal and plastic manufacturing are quite interesting. It simply depends upon how you configure the system. It is a good package in my opinion
Regards
Lokesh Tayal CPIM

Mass Video Asset Management in Lightroom 4 - Watch as I Test (Flail and Fumble)

The Project is to: catalog, keyword, manage, rate, and organize over 3400 video clips (AVCHD clips re-wrapped as MOV files) shot in 30 days in Costa Rica. The shoot was purely run and gun -total guerrilla style. As we were unable to do much transfer and review in the field, I came home with a huge project to complete before editing videos. I've limited the choices of software for asset management & organization down to Lightroom 4 or CatDV. Ethically, I feel obligated to say that I"m pulling for Adobe since I use the entire suite, and there are some nice fringe benefits keeping everything "in house,"
First Step: All video files are AVCHD files which are re-wrapped (by ClipWrap) into MOV files. This step is crucial, since AVCHD does not include/store metadata in the video file itself.
Second Step: Files are stored on the MAC-OS level into folders corresponding to the dates the shots were taken
Third Step: Get the 3400+ files organized, weeded, and prepped for editing
@#$!)~*(*&%^ <-- That's what a record scratch looks like in the digital age
I started examining software solutions and gave each a couple of good tries to narrow the choices down to TWO packages of software:
OnLocation - Couldn't feel it and it looks like it's meant to work for a different flow. No.
Cosmos - Couldn't really do much of anything with metadata. No.
Bridge - Almost there, but pretty limited and not dual screen friendly at all. No.
CatDV - Now there you go...almost. Everything is in a catalog meaning you have to go between this software and Premiere. Definite maybe.
Lightroom 4 - Comes with heaps of background in organizing stills, how will it work for massive amounts of video? Definite maybe.
CatDV and Lightroom 4 both imported everything just fine.
I'll post more as I get into it. Soon, if anyone cares to read more.

Lightroom 4 has completed the task of importing 3440 video clips. CatDV (fully functional 30 day trial) crashed again on the large import. I'm going to try importing 10 folders at a time in CatDV.
As I start to play in Lightroom4 with asset mgmt:
PROs
Slick relatively tweakable user interface
Keyword buttons are great (wish we could have more on the surface)
Nice "twirl-down" flow that Adobe uses in the product line -I love this
CONs
Lightroom4 video previews are horrifically sluggish at best, and at this point is unusable for a large collection
The scrub over (video thumbnail) preview is a huge resource hog and would benefit from a disable option
Second Monitor pane has some issues/incongruencies with the main monitor pane:
Grid view will not allow multiple files to be graded/keyworded/etc simultaneously
Loupe view will not play video files and treats the video file preview like a photo
This is all for now. More on CatDV when I get it going.

SAP Mobile Infrastructure and Mobile Asset Management Training

Hello All,
We would like to announce that SAP Education is offering the following courses the week of November 6, 2006 in Newtown Square, PA:
<b>1. TMOB20</b> (Mobile Infrastructure Administration) 2 days
Course description link: http://www50.sap.com/useducation/curriculum/course.asp?cid=60168283
<b>2. TZMAM2</b> (Early Product Training SAP Mobile Asset Management 2.5) 3 days
Course description link: http://www50.sap.com/useducation/curriculum/course.asp?cid=60205890
Please register as soon as possible to reserve your seat for these special deliveries. These are the only scheduled deliveries of these courses planned for the remainder of 2006.
To register call 1-888-777-1727 or 610-661-6501.
For questions call 1-877-876-7271 or post directly in this thread.
Best Regards,
Ted

Hi,
We have this answer in many other threads..
Mobile infrastructure (MI 2.5 / MI 7.0) is the older release of mobile.The latest version of mobile is NW Mobile 7.1 which comes with a total architectural change, provides better scalability and has advantages in many other areas like better modeling, monitoring options , faster device synchronization time etc.
Netweaver mobile constitutes of server (DOE) and a default client framework (Netweaver mobile client) .
Mobile application could be created using NetweaverDeveloper Studio(NWDS) that will present the data required by the mobile device user.
This mobile application once deployed on a device will work on the local persistency and during synchronization with DOE sends the modified/new data to Backend via DOE.
Customers can also develop a custom client framework and application that still talks to DOE (and inturn to backend)
NW mobile 7.1 could be used to build mobile applications suiting offline and onlines scenarios.
In few words to mobilize enterprise solutions
SAP R/3 will act as backend
---talks to DOE through remote enabled BAPI Wrappers ---
NW mobile will be middleware that does the data orchestration
Upon Synchronization of mobile device with DOE using a messaging protocol over http(s)
Receivers could be devices with client application installed / another server.
checkout this [configuration guide|http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm] and [developer's guide|http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm]
for understanding how to start with development with NW Mobile 7.1
Regards,
Liji

WAM( work and Asset Management)

Similar Messages

Maybe you are looking for