Wampserver, and Microsoft Express in Windows 7 Bootcamp

I have system 10.6.7. I plan on running PC products like Wampserver, and Microsoft Express. Has anyone had no problem? issues? in running these products in Windows 7 on bootcamp?

I'm running Wampserver and having zero problems. I am also running the full version of Visual Studio, not the Express version, and am not having any problems with that either. Windows 7 SP1, Macbook Pro, 8GB RAM, 500GB HD.

Similar Messages

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Adobe Acrobat XI and Microsoft Expressions 4

Background: Windows 8.1 box, Adobe Acrobat XI (ver. 11.0.07), Microsoft Web Expressions 4
User has Web Expressions open to the intranet web page access, she's able to use that to make changes, changes are seen reflected on intranet page. However when she tries to open a pdf of the intranet via the Web Expressions there's an error message "Adobe has stopped working". I went to the actual intranet page and was able to open one of the pdfs using Adobe Acrobat, as well as opening other pdfs that she had resident on her pc. I created a pdf using the Acrobat tab on Word, then opened it up into Adobe Acrobat, no problems.
I checked the Event Viewer:
Log Name:      Application
Source:        Application Error
Date:          7/23/2014 9:02:36 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      AP.Gov
Description:
Faulting application name: Acrobat.exe, version: 11.0.7.79, time stamp: 0x536b812b
Faulting module name: Acrobat.dll, version: 11.0.7.79, time stamp: 0x536b80ff
Exception code: 0xc0000005
Fault offset: 0x00cbf281
Faulting process id: 0xb8
Faulting application start time: 0x01cfa68f855c86ad
Faulting application path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Faulting module path: C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.dll
Report Id: c31c2504-1282-11e4-82c9-a0d3c10adc46
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-23T16:02:36.000000000Z" />
    <EventRecordID>31941</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APSD-006.AZCourts.AZ.Gov</Computer>
    <Security />
</System>
<EventData>
    <Data>Acrobat.exe</Data>
    <Data>11.0.7.79</Data>
    <Data>536b812b</Data>
    <Data>Acrobat.dll</Data>
    <Data>11.0.7.79</Data>
    <Data>536b80ff</Data>
    <Data>c0000005</Data>
    <Data>00cbf281</Data>
    <Data>b8</Data>
    <Data>01cfa68f855c86ad</Data>
    <Data>C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe</Data>
    <Data>C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.dll</Data>
    <Data>c31c2504-1282-11e4-82c9-a0d3c10adc46</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>

Additional information:
I uninstalled both the Adobe Acrobat and Web Expressions, then re-installed each, first Acrobat then Web, still gave error, then Web and Acrobat, also gave error. I did find that when the Acrobat was open, then I selected the link in Web Expressions it would open fine, it's when the Web Expressions is launching the Acrobat that it has the problems. I installed Adobe Reader XI and made it the default, some links would open normally, however other links wouldn't open at all, no error though. I spoke with an Adobe technician, he suggested I go into the Acrobat icon and change the Compatibility Mode to XP SP3, however the error still occurred. He then said to put it to Windows 7, again error occurred. Lastly he said to run it as administrator, however I had given the user full admin rights and the error still occurred. I still set it to run as administrator, still gave the error message. This only means that when I open the desktop icon it's in compatibility mode, however when it's launched via Web Expressions is when it's having the error. I did try setting the Web Expressions to compatibility mode to XP and 7, as well as run as administrator, same error message. I found out that other users that have Web Expressions and Adobe Acrobat, as well as using it in this manner, do not have that error message.

Something happened and your installation of Windows 8.1 couldn't be completed

I have a brand new Acer with Win 8 installed. I've removed McAfee. Other than that the machine is as delivered.
Trying to download 8.1 and install it from the store. It sits there for a couple of minutes then says:
Your Windows 8.1 installation couldn't be completed
Something happened and the installation of Windows 8.1 can't be completed.
Now apart from this being really annoying could anyone have come up with a less useful message?
I have tried it several times. I've run the compatibility util and it passes. I've tried the store without logging in, then tried the store with logging in.
I've tried it in Firefox, tried it in IE.
Same result every time.

OK, so I posted 2 days ago about this issue, and I resolved it yesterday. I essentially performed a "refresh" under Windows 8, which removed a lot of the updates and applications that could be potential issues.
I then had to go to the Sony website to re-install the latest drivers, SW and driver patches related to my Vaio Duo (I had already updated the firmware and Bios -- necessary to install Windows 8.1--). I then had to re-install all Windows 8 updates,
and magically, the Windows 8.1 update started to download when I clicked on it in the Windows Marketplace. I do not know what was the source of the problem, but the refresh definitely got rid of it. It is a long process however as a lot has to
be reinstalled to bring the refreshed system to its full functionality with the latest manufacturer and Microsoft updates for Windows 8.
I can't see how a non-technical user could perform all these steps to upgrade a recent tablet to Windows 8.1!
Good luck!
Olivier

Macbook bad DVD drive how to install windows in bootcamp

My macbook has a bad DVD drive. I just upgraded it to snow leopard and want to install windows using bootcamp. Unfortunately when the windows installation starts the machine reboots but does not seem to be able to detect the windows disc in an external dvd that I have attached to it. I tried two different usb dvd readers and finally a firewire one I had laying around to no avail.
without the DVD drive working, how can I get it to install Windows?
thanks very much in advance for any help

Hi Amy
Welcome to Apple discussions.
This particular forum is for student software developers so you might not get an answer to your question. I suggest you post it again, but this time to one of the Boot Camp forums. Maybe someone there will have the answer you want.
Best wishes and good luck
Bob

Best way to clone a Windows 7 Bootcamp Partition?

I have a 1 TB hard drive that has 2 partitions, one for my OS X install and one for my Windows 7 Bootcamp which I am running parallels off of, and I want to move to a 2TB hard drive and am wondering what the best solution might be to clone my Windows partition to move it to the new drive. I will be using Carbon Copy Cloner for the mac partition.
I am assuming I need to partition the new drive, then use bootcamp assistant to make the new bootcamp partition, and then use something like Casper from within windows to clone the windows 7 partition? Can I run that while just running in parallels? I am assuming I can.
I see that people used to use a program called WinClone on the mac side, but it seems to have been discontinued, and was never updated to work with Windows 7.
Thanks for any help you can give me, it is appreciated.

I don't know of any free imaging programs for Windows. I use Symantec Backup Exec System Recovery (a.k.a.: Ghost.) I've also used Acronis Trueimage in the past. Both work well and are quite popular, but are not free.
For situations like you describe, I prefer to reinstall Windows rather than image. And then install the current versions of whatever programs rather than move over all the leftover garbage in the Registry and old DLLs, etc.
In fact, if you're using Parallels, then if you made a typical virtual machine rather than have Parallels use your Boot Camp Partition, then you wouldn't have an issue "moving" Windows. A "typical" virtual machine is just a bunch of files so "moving" Windows means just copying the files within OSX. If you need the full performance of Boot Camp (i.e.: Photoshop, Autocad), then fine, but otherwise I say take this opportunity to reinstall Windows clean as virtual machine. Then when you want to move to a 3TB drive in the future, you're good to go.
Additionally, reinstalling Windows would avoid you having to buy an imaging program for Windows. So no $$$, just a few hours of labor. And if you reinstall Windows as a virtual machine, then the future "move" would still be no $$$ and even less labor.

Windows 7 on Bootcamp I am locked into a DOS screen and it is not installing. I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP

I ran bootcamp and tried to install Windows 7. I end up with a DOS screen and an unresponsive keyboard.
I have been on line with Apple and microsoft and they can't help. I have lated versions of Lion and bootcamp. HELP!
My Lion is up to date.
I used the 64-bit windows disc.
Should I try parallels?

Do you have a DOS screen with a command prompt or just a blank screen?
Is your Windows 7 x64 an original MS Full Version Installation DVD?
Did Windows 7 Install Disc start?
If it did you would have had to choose the location of where to install Windows 7.
Did you select the Partition named BOOTCAMP that corresponded to the Partition Size you created in BootCamp?
Were you asked to format the Partition?
Did you format the partition to NTFS and then get an option to click NEXT and actually start the Windows 7 installation?
Do you have a wired USB keyboard and wired USB mouse?
If you actual went through the installation and restarted then here are some things to try:
First try doing a CONTROL-ALT-DELETE and see if a Windows Option Screen appears.
If you get the Screen you will have some options displayed.
You want to highlight and click TASK MANAGER which should be the bottom choice I beleive.
If Task Manager runs you will get a window showing all the processes running.
See if you can find EXPLORER.
If EXPLORER is running highlight it and go to the bottom right and click the END TASK button.
Now go to the Top Left Menu Bar.
Click FILE
In the sub menu that opens select RUN or RUN NEW TASK (Not sure which it is in Windoes 7 as I am running Windows 8)
Once RUN is selected a new window will open to CREATE NEW TASK
Type in EXPLORER and then the OK button.
If Windows 7 installed properly the Desktop should appear after a bit of time.
Your first concern is to get your keyboard running so you may have to remove and reinstall Windows using Boot Camp on the Mac Side.
Let us know how it goes..

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect". I checked to make sure IE is not off line. Any suggestions please?

I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal. I checked to make sure IE is not off line. Any suggestions please?

Try using a different browser as a test.

Is it possible to install Microsoft SQL Server 2008 Express on windows server 2012 (not R2) ?

I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?

I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

Microsoft Outlook and Outlook Express Personal Folders in CreatePDF

Hello CreatePDF Team
Share some knowledge with me. Can my Microsoft Outlook and Outlook Express emails in Personal Folders be imported into CreatePDF format from old computer and export to a new computer.
The new computer is a HP Model which has Window 7 version using Live Window Mail.
Please let me know and show me the steps to do it.
Thank you.
Sophia Lim
email [removed by moderator]

Good day Sophia,
There is no integration between our CreatePDF service and Outlook or Outlook Express.
Our desktop application, Adobe Acrobat, will integrate with most versions of Microsoft Outlook to allow you to convert your emails to PDF files.
Please let us know if you have any questions.
Kind regards,
David

Microsoft Expression Encoder 4 crashes when clicking Start button to begin live smooth streaming to a publishing point created in Windows Server 2012

Microsoft Expression Encoder 4 crashes when clicking Start button to begin live smooth streaming to a publishing point created in Windows Server 2012, I've got the following error. Can anyone help me with this? Thanks in advance!
Nombre del evento de problema:   CLR20r3
Firma del problema 01:   encoder.exe
Firma del problema 02:   4.0.4276.0
Firma del problema 03:   4eafa0d7
Firma del problema 04:   mscorlib
Firma del problema 05:   4.0.30319.18408
Firma del problema 06:   52310b91
Firma del problema 07:   3e69
Firma del problema 08:   0
Firma del problema 09:   System.InvalidCastException
Versión del sistema operativo:   6.2.9200.2.0.0.272.7
Id. de configuración regional:   3082
Información adicional 1:   5861
Información adicional 2:   5861822e1919d7c014bbb064c64908b2
Información adicional 3:   dac6
Información adicional 4:   dac6c2650fa14dd558bd9f448e23afd1
Lea nuestra declaración de privacidad en línea:
http://go.microsoft.com/fwlink/?linkid=190175
Si la declaración de privacidad en línea no está disponible, lea la declaración de privacidad sin conexión:
C:\Windows\system32\es-ES\erofflps.txt

2014-12-17 16:05:41 Msg 5170, Level 16, State 1, Server \\.\pipe\Microsoft##WID\tsql\query, Line 2
Cannot create file 'C:\Windows\WID\Data\SUSDB.mdf' because it already exists
Looks like somebody forgot to remove the database from the last time WSUS was installed.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

Hi again,
I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
Thanks a lot. Any suggestion or advice very welcome and appreciated.

I ran into this with Windows7 64 but, could not get the jet 4.0 to work. Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect. I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Video Express 10 and Microsoft LifeCam

Hi
Is the Microsoft LifeCam supported in Presenter 10 video express? It worked fine in version 9, but every time I try and use it now after updating to Presesnter 10 I get an error message stating it is busy or not functioning (and it is not busy and it is functioning). But it works fine in other applications.
Thanks

This area is for forum issues only. You'll have better luck posting your question here:
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprogeneral
Please do not read this sentence. Please ignore the previous sentence.

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries?

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.

If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on. The iCloud calendars will then download to your phone.

Wampserver, and Microsoft Express in Windows 7 Bootcamp

Similar Messages

Maybe you are looking for