WAN light not working!

My Network extender just currently stopped working out of the blue. My WAN light is not coming on at all, my ethernet cable is plugged in correctly. I even switched out the cable just in case the cable went bad. I have reset the system and still no WAN light, Has anyone else had this problem?? If so do you have any solutions!

This is Linksys. Check the D-link website.
The box said windows xp or better... So I installed Linux!

Similar Messages

Nokia N8 Breathing Light Not Working PR1.1

Many of my co-N8ers on a forum said that after updating to PR1.1 (013.016) the breathing light is not working anymore even though it is turned ON in the settings. When I tried it on my N8, I can confirm that it is not wotking!
Can anyone try and confirm this one?
Solved!
Go to Solution.

@kichIf it is the same error as my N8, then I'm afraid it's a hardware failure. The notification LED has been missing for almost a year on mine. I just finished the spring cleanup, starting with a 3-button (very) hard reset and loading the latest Belle Refresh with the Nokia Software Recovery Tool. This made no change to the LED's.
Symptoms:
* Breathing light not working
* Notification light for SMS and missed calls not working
* Charge indicator LED not working during charge - but it blinks 5 times when the shut down phone is connected to a charger
A diagnostics software list the error as: ST_LED_CONTROLLER_TEST No Minor [ 10 ]
The phone is otherwise healthy and stable so I don't worry too much about the missing LED's.
If it must develop an error while it gets older, this is not so bad...
Hans

Compaq Presario F767NR caps lock,scroll,touch pad blue light not working

Hi,
I have a Compaq Presario F767NR. It downgrade it to xp. All my drivers are ok. But caps lock,scroll,touch pad blue light not working though its function is ok.
I think led is ok. I find that for the scroll lock when i press fn+num lk then the blue light works fine.

I have the same problem and I think it started when I downloaded the SP2 for the Windows Vista. So probably it is not a problem of the laptop. I have an HP Pavilion dv9500 notebook PC.
Message Edited by Yannis1980 on 10-13-2009 12:09 PM
Message Edited by Yannis1980 on 10-13-2009 12:09 PM

Iphone 6 plus led light not working in 8.3

I updated to 8.3 a few days ago and have just noticed that my led light does not work.
I backed up the phone, reset it to factory settings and it's still not working. Ay ideas on what I can do next?

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Macbook pro retina keyboard back light not working

Hey guys my macbook pro retina early 2013 backlight is not working ...i have tried increasing light intensity of backlight using f5 and f6 keys still its not glowing and i tried with app called labtrick ...still its not getting on

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

AC adapter light not working

When charging my Macbook Pro sometimes the indicator LED light doesn't come on at all. Everytime I checked when the LED isn't working the computer still charges, but I am not sure if when I leave it sometimes if it is charging correctly since the LED doesn't work periodically. I am also wondering if this is an issue with the adapter, rather then the actual computer port. If it is the computer port I don't feel comfortable with sending it out for repairs if its just a small issue. I guess what I am trying to see is if anyone else has experienced this issue. I would much rather go to the apple store and recieve a new adapter, and if the issue persists I can send it in for repairs. Please if anyone has experience with the same trouble I have had let me know. Thank you in advance.
-Andrew

May be the adapter is not working properly.
Take the MBP and MagSafe/Power Adapter to the Apple store for evaluation.
For:
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best.

WAN replication not working for objects

I am trying out the WAN replication example from the Tangosol website. I got the Boston-London example working. However, it seems to only work for simple types like String, int, etc. Objects like hibernate, compressed string are not replicated across. Is more config added for this to work?

Hi Sham,
In one of environment we are using publish and author server. Custom comments are replicating on Author environment. We are not using custom workflow or JCR observation.Created one more environment for Production setup where 2 publish and 1 author instance. For this comment are not auto replicated on Author instance.
Default comment modification and comment activation launcher are in place, no change in this. Does it not working due to additional Publish Instance and if so what additional setting will required to address it ?
Thanks
Yogesh

Flash light not working

i have iphone 4 flash light is not working.....

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

MSI GT 72 QE steelseries lights not working

Hi there .My lights are not working anymore. Yes ,i have the lattest driver installed from msi site ,for wind 8.1 all good in device and printers ,all drivers are installed and working properly if i check them...and still ,no lights .Any idea ?

Quote from: clement_big_boy on 31-December-14, 00:37:52
Hi there .My lights are not working anymore. Yes ,i have the lattest driver installed from msi site ,for wind 8.1 all good in device and printers ,all drivers are installed and working properly if i check them...and still ,no lights .Any idea ?
make sure steel series engine is installed if it isnt then download it and install it then make sure a profile exists as well on program or it will either remain keyboard as off or red

WRT300N - Port 1 Light not working

Just wanted to know if anyone has experinced the LED port light not functioning...Details:
The Router seems to be working fine...It is just bothering me that the Port 1 light is not working....I have that port active with a Vonage Modem and the Vonage Modem is working fine.....It is just annoying me that the light is not functioning onthe WRT300N...
I noticed the previous day it WAS working.....
Hasa anyone else encountered this and If you got it to work again how do you accomplish this...

Well the LED does not light at all, or it flashes in a while? Anyways if the port is working then, why to worry about it!

T430s - Disk-activity and wireless indicator lights not working

Just noticed that the indicator lights on the T430s are not working. There is a wireless and a disk activity light that are not lit up or blinks during activity. Located just left of the T430s sign on the lower half of the laptop cover.

Hello:
That is a new one on me!
Try trashing a couple of preference files and then restarting:
com.apple.dock.plist
com.apple.dock.db
Barry

After Effects lights not working

I am working in After Effects CC. I added a light to my scene and it just turns all of my 3d layers black. I am a very seasoned AE user. I have worked with lights before. I don't know what is going on here. It's not a draft mode issue. And my lights are not behind my layers or anything like that. I have found other people in the online forums with this problem from over the years but never a solution. Ambient light is the only light that works. Spot, pin, and parallel turn everything black. Thoughts?

Once the problem presented itself I started fresh with a new project and very simple comp and still had the same problem.
So my settings are pretty straightforward.
I am using After Effects CC (not the 2014 version)
I have one 3d solid that I pushed back in z-space. It is set to receive lights.
I am using Classic 3d.
I created a new spot light.
The settings are as follows:
Intensity: 100%
Color: white
cone angle 90
cone feather 0
falloff smooth
radius 75
Falloff distance 24
Casts Shadows on
Shadow Darkness 20%
Shadow Diffusion 0
If I turn my light off you see my solid. If I turn it on you see only blackness.
If I add a 2d layer you can see it. Once I make it 3d, it turns black.
Thanks for any advice you have. I'm guessing I probably need to do a clean install or something because this is crazy. It's not like I've never used lights before. They just up and stopped working.

N900 Physical keyboard lights not working

Hi,
Physical keyboard lights are not working when display is fully up. Keyboard lights work only when display is halfway up. Lights go off just a millimeter before when display reach it top position.
Can anyone suggest is this a software issue or there is something physically wrong with phone (slider-switch is slightly misplaced or broken)?
Thanks.
Solved!
Go to Solution.

Thanks to all for content-rich reply..
-> to cpitchford: I downloaded package and entered the commands you suggested. X terminal reply after "sudo gainroot" was "Enable RD mode if you want to break your phone". I'm not at home with RD mode, so I rather don't mess with it.. After all it was mentioned to just monitor when the switch is on/off? Keyboard light comes ON when display bottom edge reaches middle of Q-letter (on keyboard) and go OFF after the "clunk". Then, if I slightly press down the display (1mm) the keyboard lights come ON again.
_> to DrEJV :I think the background light sensor is working OK - when I cover the light sensor with finger ,display dimes slightly. Problem is that keyboard light don't work at all when display is fully open, not even in total backround blackout.
Think that there might be wrong something with physical switch, as jlpils suggested, because now I know that they SHOULD be lighted
thanks again

Caps lock light not working properly

My Laptop caps lock is not working properly , when i press it , the light just flashes and dissappear , the light is suppose to stay there , the things that i type will still be in caps though , any idea how this happens?

Hey,
Sorry to hear about the keyboard problem.
In a post a while back had this to say. He makes a suggestion that the keyboard might need to be replaced, then the person with the question tried something else. You might take a look and see if there's something there that will help.
Thanks for coming to the forum.
Hope I helped,
GeorgeFN
I work on behalf of HP.

Wireless keyboard caps lock light not working

Hey, said it all in the title but here's the story...
Got home today and realized that the caps lock LED don't light up anymore. Has anyone else had similar problems? If so, how was your situation rectified?
The keyboard still works fine, don't think its a bad enough problem to have it replaced or be without it for ages. Could see if apple will allow a straight swap at the shop...

Hi Guys
Glad I've just found these posts. Got a new 27" iMac just before Christmas. Greatly relieved that everything worked despite all the reports of cracked screens, etc. BUT - only small problem was the Caps Lock light not always coming on. Rang Apple and got a replacement. Now today I'm having same problems - first the light froze and wouldn't go off. Then it wouldn't come on. I've now tried your advice of switching off the keyboard and taking out the batteries. Works OK now. Hopefuly it'll stay that way. Only thing is - pity Apple couldn't have given me that advice. Reading these posts, there is clearly an ongoing problem with the caps lock light on the wireless keyboard. A problem thats been around for months. Clearly Apple's poilicy, as always, is to admit nothing until it comes up with a fix. Pity that policy appears to extend to not even telling their own employees that there is a problem ...

WAN light not working!

Similar Messages

Maybe you are looking for