WAN MINIPORT ERROR AND TAKES A LONG TIME TO SHUT DOWN

Few days before,my device manager was showing yellow exclamation mark in wan miniport(ikev2),SSTP and another area, which i can't remember.So i searched on forums and use another software to fix this.The link to website is - https://www.vpnhosting.cz/index.php/clanky/wan-miniport-repair-tool-solve-vpn-and-dial-up-error-code-720-and-similar-ppperrors.html
i followed the process but now when i boot my laptop it does not show wan miniport driver initially on device manager .After long hours it shows wan miniport drivers but again with yellow excamation mark.I think it tries to install the driver at the beginning.Now
the problem is, when i shut down it takes a very long time with a huge fan operation noise.Many times it goes in to hibernation state to avoid overheating.Sometimes i have to forcibly shut down using the power button.Now when i start it , it again
does not show wan miniport drivers in device manager.This way the cycle continues and many times my laptop does not get a proper shut down.What do i do? please help me..

Hi,
May I know thw error code displayed in the problematic wan miniport drivers? Code 720 as in the link you post above or other error code?
This link can be helpful for further troubleshooting (please create a restore point before making changs to the system in case any incorrect operations can cause unexpected issue)
Fix Broken Wan miniports
http://community.spiceworks.com/how_to/show/55611-fix-broken-wan-miniports
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Similar Messages

Makes too much noise as soon as I switch it on and never stops and takes a long time to shut down

Makes too much irritating background noise that makes it impossible to record the audio for my videos

Hi,
May I know thw error code displayed in the problematic wan miniport drivers? Code 720 as in the link you post above or other error code?
This link can be helpful for further troubleshooting (please create a restore point before making changs to the system in case any incorrect operations can cause unexpected issue)
Fix Broken Wan miniports
http://community.spiceworks.com/how_to/show/55611-fix-broken-wan-miniports
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Mac OS X take a long time before shutting down...

Hi everyone,
I have a problem that I can't explain :
My mac book pro take a long time before shutting down. I don't know why.
When I click shut down, everything works normally.
OS X quit my applications, the dock, the finder...
But it's stay 10 minutes on my desktop background before the logout and finally the shutdown (what's the matter ? what does it do ?).
I don't know what to do to find the problem...
Maybe it's a process but I don't know how to localize it.
What are the minimal processes in OS X (I'll try to find the problem by elimination) ?
P.S. Sorry for my basic English... French native.
Thank a lot for your help !

Hello everyone !
It's me d.bertrand (I had a problem with my account...) So I create a news account (sorry moderators) !
I try to fix bugs with onyx but no results.
Here my log files (I shutdown OS X at 11:48 and he really shut down at 12:04... 16 minutes !)
With Onyx I look into the log file... And find that :
SYSTEM LOG
Jul 6 11:48:51 denis-bertrands-computer shutdown: reboot by Den:
Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: "/Library/StartupItems/Tablet" failed security check: permissions
Jul 6 11:48:51 denis-bertrands-computer Parallels: Stopping DHCP/NAT daemon...
Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: authentication service (508) did not complete successfully
Jul 6 11:48:52 denis-bertrands-computer Parallels: Unloading Network module...
Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading ConnectUSB module...
Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading Monitor module...
Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels VM observer thread stopped
Jul 6 11:48:54 denis-bertrands-computer Parallels: Unloading Hypervisor module...
Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels Workstation Hypervisor exited.
Jul 6 11:48:54 denis-bertrands-computer Parallels: Shutdown complete.
Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: The following StartupItems failed to properly start:
Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: /System/Library/StartupItems/AuthServer
WINDOWSERVER LOG
Jul 06 12:04:09 [84] CGXRestartSessionWorkspace: session workspace exited for session 256 ( on console )
Jul 06 12:04:09 [84] loginwindow connection closed; closing server.
Any idea ?
Thanks !
MBP 15" 2.33 / 2GoRAM Mac OS X (10.4.10)

Why does Mountain Lion take a long time to shut down my MacBook Air when I chose "Shut Down?" Much longer than before the upgrade.

Mountain Lion takes a long time to shut down. Much longer then Lion.
Any comments appreciated.
Alan

The honeymoon is over?

When Time Machine is backing up, my computer is so slow that it is essentially useless. Backups occur irregularly, and take a long time.

When Time Machine is backing up, my computer is so slow that it is essentially useless. Backups occur irregularly, and take a long time. How do I get Time Machine to work properly?

Hello,
Have you verified both drives in Disk Utility?
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

HT1222 I would like to be able to delete more then just one email at a time. I get a lot of mail that needs deleted and takes a long time to do. Would like to do 10 email deletes at a time on my iPad. Can you help me.

I would like to be able to delete more then just one email at a time. I get a lot of mail that needs deleted and takes a long time to do. Would like to do 10 email deletes at a time on my iPad. Can you help me.

open inbox
tap Edit on top right of list.
tap each email to check it off. Then tap trash. then 'trash selected mesages"
done

Why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

Can't really say, but I see this occurring on all of my Macs since the 10.8.2 update and keep reading about it at several other Mac user boards.
Bottom line: it's a general problem, but more of an inconvenience, than a serious problem. Probably will be solved with the next update.

It takes much longer time to power down.

Since i upgraded to mountainlion it takes much longer time to power down. As if the harddisk is being scanned. Anyone any thoughts on that ?
greetz,

Since i upgraded to mountainlion it takes much longer time to power down. As if the harddisk is being scanned. Anyone any thoughts on that ?
greetz,

AP Trial Balance - File is massive and takes a long time to open up

Hello,
We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
3. We tried running in various formats Text, PDF, HTML with no luck.
4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
My questions are:
1. Why is there a such a large increase in file size? Is this expected going to R12?
2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
5. Why are we getting Authentication failed errors? Just for these reports?
Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
Any help or pointers from the experts here is greatly appreciated.
Thanks
Edited by: user11992646 on Jan 27, 2012 2:12 AM

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

Take long time to shut down for macbook pro OS yosemite

after installed yosemite, my macbook pro (year 2013)take very long time (about 30sec) to shut off when i click shut down.. anyone have the same problem?

5 seconds is to fast. 20-30 seconds OK. 40 seconds have a cup of coffee.

Having trouble with Yahoo email. Will read a few emails and then the infamous spinning colored wheel appears and takes forever. Have to shut down and go through the whole cycle again. Please help.

Sorry first post in this forum. I can log on to Yahoo email, read a few emails and then the infamous multi-colored spinning wheel appears and I end up having to shut down and cycle back in again. I have a 2011 MacBookPro 17 not quite a year and it just started acting up this way. Any suggestions. Thanx.

here are some ways to troubleshoot the spinning beach ball: http://www.macworld.com/article/151583/2010/05/spinningbeachballofdeath.html Hope you find this useful.

Mac shows symbols and takes a long time to start. HELP!!!

When i start my mac it shows me a strange symbol in a grey screen..
It looks like the symbol from the network ( that round blue circle)
Only it goes on and off the whole time.
and it takes ages to start the mac.
And after that is one is gone another one shows up.
this one looks like a map with the finder symbol in it..
and it repeats together with a question mark.
it all started when we changed our internetprovider.
What is it and how can i fix it?
PLEASE HELP ME!!!
emac Mac OS X (10.3.9)

shubs,
Welcome to the Apple Discussions!
You're seeing the NetBoot symbol; somehow, your Mac thinks it's supposed to boot off an unavailable network volume. The startup attempt will eventually time out and go on to the next devices it thinks it's supposed to try to boot from, until it eventually reaches your hard drive.
If your Mac is currently booted to the hard drive and usable, go to System Preferences> Startup Disk and select your hard drive's OS X System.
if the eMac is currently off, you can start it while holding down the 'x' key to force it to try to boot from the hard drive (more strictly, from an OS X System on the first partition of the hard drive).
Another option is to reset PRAM (which includes resetting the boot volume setting) by holding down command-option-p-r at startup until you hear three sets of chimes, then release the keys.
Once the startup disk is cleared up, you should go through the various System Preferences settings and make sure everything else is the way you want.

MBP takes long time to shut down

Hi,
Recently my 13" Mid 2012 MacBook Pro has been taking around 30-40 seconds to shut down whereas it only took 3 seconds before. The system itself is as responsive as ever and the OS and hardware seem to be working well, but the hard drive seems to be taking a long time to stop. Please help. This is very worrying.

1. Startup in Safe Mode.   http://support.apple.com/kb/PH14204
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Migration Working with Errors and Taking Very Long Time: Transient error MapiExceptionNetworkError, StalledDueToMailboxLock

So, I am migrating mailboxes to a 2013 EXC from a 2010 EXC. Both in same subnet on same domain. Firewall on WIndows disabled:
Setup batch move on 2013 box. But users logs are getting
StalledDueToMailboxLock in the status as well as
Transient error MapiExceptionNetworkError has occurred. The system will retry (1/60).
also, The mailboxes eventually migrate over 2-3 days. some quicker some with out error. Error comes up with mailboxes that users do not use. I have a lot of users to migrate and cannot migrate as such a slow pace.
Any Ideas of the error??
RunspaceId : 6c688e69-8ba8-4044-9807-7f56d35be440
MailboxIdentity : bwa.local/BWA/UK/UK User Redirect/Angie Dolan
DistinguishedName : CN=Angie Dolan,OU=UK User Redirect,OU=UK,OU=BWA,DC=bwa,DC=local
DisplayName : Angie Dolan
Alias : adolan
ExchangeGuid : 4c60f493-e5f5-46bb-adf1-9bea9790f5ca
ArchiveGuid :
Status : InProgress
StatusDetail : StalledDueToMailboxLock
SyncStage : CopyingMessages
Flags : IntraOrg, Pull
RequestStyle : IntraOrg
Direction : Pull
IsOffline : False
Protect : False
DoNotPreserveMailboxSignature : True
Priority : Normal
WorkloadType : Local
Suspend : False
SuspendWhenReadyToComplete : False
IgnoreRuleLimitErrors : False
RecipientTypeDetails : UserMailbox
SourceVersion : Version 14.3 (Build 123.0)
SourceDatabase : Mailbox Database 1691384683
SourceServer : CLOUD-EXC-01.bwa.local
TargetVersion : Version 15.0 (Build 775.0)
TargetDatabase : Mailbox Database 0192305397
TargetServer : CLOUD-EXC-02.bwa.local
SourceArchiveDatabase :
SourceArchiveVersion :
SourceArchiveServer :
TargetArchiveDatabase :
TargetArchiveVersion :
TargetArchiveServer :
RemoteHostName :
RemoteGlobalCatalog :
BatchName : MigrationService:b
StartAfter :
CompleteAfter :
RemoteCredentialUsername :
RemoteDatabaseName :
RemoteDatabaseGuid :
RemoteArchiveDatabaseName :
RemoteArchiveDatabaseGuid :
TargetDeliveryDomain :
ArchiveDomain :
BadItemLimit : 0
BadItemsEncountered : 0
LargeItemLimit : 0
LargeItemsEncountered : 0
AllowLargeItems : True
QueuedTimestamp : 3/23/2014 1:06:19 PM
StartTimestamp : 3/23/2014 1:06:27 PM
LastUpdateTimestamp : 3/23/2014 1:25:13 PM
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp :
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 00:22:38
TotalFinalizationDuration :
TotalDataReplicationWaitDuration :
TotalSuspendedDuration :
TotalFailedDuration :
TotalQueuedDuration : 00:00:03
TotalInProgressDuration : 00:22:34
TotalStalledDueToCIDuration :
TotalStalledDueToHADuration :
TotalStalledDueToMailboxLockedDuration : 00:13:47
TotalStalledDueToReadThrottle :
TotalStalledDueToWriteThrottle : 00:02:14
TotalStalledDueToReadCpu :
TotalStalledDueToWriteCpu : 00:00:04
TotalStalledDueToReadUnknown :
TotalStalledDueToWriteUnknown :
TotalTransientFailureDuration : 00:01:36
TotalProxyBackoffDuration :
TotalIdleDuration : 00:04:45
MRSServerName :
TotalMailboxSize : 3.534 GB (3,795,059,862 bytes)
TotalMailboxItemCount : 20741
TotalArchiveSize :
TotalArchiveItemCount :
BytesTransferred : 59.82 MB (62,723,648 bytes)
BytesTransferredPerMinute :
ItemsTransferred : 412
PercentComplete : 25
CompletedRequestAgeLimit : 7.00:00:00
PositionInQueue :
InternalFlags : SkipFolderPromotedProperties, WordBreak
FailureCode :
FailureType :
FailureSide :
Message : Informational: The request has been temporarily postponed because the mailbo
is locked. The Microsoft Exchange Mailbox Replication service will attempt t
continue processing the request after 3/23/2014 1:30:13 PM.
FailureTimestamp :
IsValid : True
ValidationMessage :
RequestGuid : 55c14015-1bca-48eb-bb79-25b480464bfb
RequestQueue : Mailbox Database 0192305397
Identity : bwa.local/BWA/UK/UK User Redirect/Angie Dolan
DiagnosticInfo :
Report : 3/23/2014 1:06:19 PM [CLOUD-EXC-02] '' created move request.
3/23/2014 1:06:26 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:06:26 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:06:26 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:06:27 PM [CLOUD-EXC-02] Request processing started.
3/23/2014 1:06:27 PM [CLOUD-EXC-02] Source mailbox information:
Regular Items: 17941, 3.509 GB (3,767,437,011 bytes)
Regular Deleted Items: 2435, 26.34 MB (27,622,851 bytes)
FAI Items: 365, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
3/23/2014 1:06:27 PM [CLOUD-EXC-02] Mailbox signature will not be preserved
for mailbox 'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'. Outlook client
will need to restart to access the moved mailbox.
3/23/2014 1:06:29 PM [CLOUD-EXC-02] Stage: CreatingFolderHierarchy. Percent
complete: 10.
3/23/2014 1:06:36 PM [CLOUD-EXC-02] Initializing folder hierarchy from
mailbox 'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)': 370 folders total.
3/23/2014 1:06:36 PM [CLOUD-EXC-02] Folder creation progress: 0 folders
created in mailbox 'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'.
3/23/2014 1:06:53 PM [CLOUD-EXC-02] Folder hierarchy initialized for mailbox
'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)': 369 folders created.
3/23/2014 1:06:53 PM [CLOUD-EXC-02] Stage: CreatingInitialSyncCheckpoint.
Percent complete: 15.
3/23/2014 1:07:58 PM [CLOUD-EXC-02] Initial sync checkpoint progress: 0/370
folders processed. Currently processing mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'.
3/23/2014 1:07:59 PM [CLOUD-EXC-02] Transient error MapiExceptionNetworkErro
has occurred. The system will retry (1/60).
3/23/2014 1:08:31 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:08:31 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:08:31 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:08:33 PM [CLOUD-EXC-02] Relinquishing job because the mailbox is
locked. The job will attempt to continue again after 3/23/2014 1:13:33 PM.
3/23/2014 1:13:36 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:13:37 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:13:37 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:13:38 PM [CLOUD-EXC-02] Request processing continued, stage
CreatingInitialSyncCheckpoint.
3/23/2014 1:13:39 PM [CLOUD-EXC-02] Initial sync checkpoint progress: 0/370
folders processed. Currently processing mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'.
3/23/2014 1:13:47 PM [CLOUD-EXC-02] Initial sync checkpoint completed: 354
folders processed.
3/23/2014 1:13:47 PM [CLOUD-EXC-02] Stage: LoadingMessages. Percent complete
20.
3/23/2014 1:14:34 PM [CLOUD-EXC-02] Messages have been enumerated
successfully. 20738 items loaded. Total size: 3.535 GB (3,795,484,545 bytes)
3/23/2014 1:14:34 PM [CLOUD-EXC-02] Stage: CopyingMessages. Percent complete
25.
3/23/2014 1:14:34 PM [CLOUD-EXC-02] Copy progress: 0/20738 messages, 0 B (0
bytes)/3.535 GB (3,795,484,545 bytes), 12/370 folders completed.
3/23/2014 1:16:45 PM [CLOUD-EXC-02] Transient error MapiExceptionNetworkErro
has occurred. The system will retry (1/60).
3/23/2014 1:17:17 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:17:17 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:17:17 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:17:17 PM [CLOUD-EXC-02] Relinquishing job because the mailbox is
locked. The job will attempt to continue again after 3/23/2014 1:22:17 PM.
3/23/2014 1:22:39 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:22:39 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:22:39 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:22:39 PM [CLOUD-EXC-02] Request processing continued, stage
LoadingMessages.
3/23/2014 1:22:40 PM [CLOUD-EXC-02] Messages have been enumerated
successfully. 20738 items loaded. Total size: 3.535 GB (3,795,484,545 bytes)
3/23/2014 1:22:40 PM [CLOUD-EXC-02] Stage: CopyingMessages. Percent complete
25.
3/23/2014 1:22:40 PM [CLOUD-EXC-02] Copy progress: 0/20738 messages, 0 B (0
bytes)/3.535 GB (3,795,484,545 bytes), 12/370 folders completed.
3/23/2014 1:24:41 PM [CLOUD-EXC-02] Transient error MapiExceptionNetworkErro
has occurred. The system will retry (1/60).
3/23/2014 1:25:13 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:25:13 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:25:13 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:25:13 PM [CLOUD-EXC-02] Relinquishing job because the mailbox is
locked. The job will attempt to continue again after 3/23/2014 1:30:13 PM.
ObjectState : New

How Many CAS Servers do you have?
Did you changed the web.config file of MRS on both exchange 2010 and 2013 CAS servers?
http://thoughtsofanidlemind.com/2010/12/03/tweaking-the-mailbox-replication-service-configuration-file/
Question:
How much time does it takes for 100 MB mailbox to move from 2010 to 2013?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Very slow to delete, send, forward, circle just goes round and round and then finally does its task plus sometimes stalls and takes a long time to get mail.

It also comes up with an error message once in a while when I try to send something and won't send it but if I click send again then it usually goes out.

Check your firewall and make sure that Thunderbird has full access. (This computer has Norton 360, and the firewall blocked incoming connections)
How many folders are you storing offline? If you have a lot in your trash/spam/sent folders and it is storing offline, maybe that's slowing it down. It wouldn't hurt to check and see if your e-mail provider is somehow blocking Thunderbird.

WAN MINIPORT ERROR AND TAKES A LONG TIME TO SHUT DOWN

Similar Messages

Maybe you are looking for