WAN Monitor page doesn't display current latency/packet loss

The on-plus when you look at the wan stats tab you DON"T see current info...I checked the setting and also tested the monitor which showed issues that generated a email....but I can't see them on the tab...a little help please

All,
The OnPlus engineering team has identified a bug that impacts the availability of the WAN Bandwidth monitor and impacts the availability of the historical bandwidth monitor data. A fix is being applied to the On100 software that will restore the monitor functionality. The new On100 software with the fix will be applied during the maintenance window early tomorrow (2/1/2013) morning. The update will cause the On100 to restart.
We apologize for any inconvenience this problem has caused.
Sincerely
Randall Jones

Similar Messages

Basic Setup Page doesn't display correctly.

I logged into my WRT54G router today to change some settings around but the page doesn't display any of the writing or links at the top of the page. I've tried reloading the page and resetting the router but neither of these worked.

Also when I click the "save changes" button nothing happens. When I opened the page in IE it gave me the Error on Page thing and I clicked it to see the errors. I had 52 errors total with the reason Object Expected for each one.

Page doesn't display properly in IE 6

Hi ppl.. My site doesn't display correctly in IE 6. (It works fine with IE 7 and 8 and Firefox) I can see through the area which is supposed to be white ( in other words, I see the background which I put in my body tag). I'm guessing that this happens because the overflow portion of my main content area is set to hidden. Is there anything I can change to rectify this? Below is my url. Sorry if my post sounds confusing. If you need any details, pls ask me.. Thank you!
http://www.readislam.net/darulhuda/aqeedah1.shtml

Differences in rendering abound between IE6 and all other browsers. But this is what I found when I ran your page through w3c validation: http://validator.w3.org/check?uri=http://www.readislam.net/darulhuda/aqeedah1.shtml&charse t=(detect+automatically)&doctype=Inline&group=0
I often see white turning up as transparent, though mostly in transparent gifs. My ploy in that case is to use a slightly off-white, usually #FFFFFE or some such. I don't know if that will ease your pain, though.
Beth

Adapter Monitoring - "Page cannot be displayed"

Hi
In RWB, Component Monitoring --> Adapter Monitoring, I'm getting page cannot be displayed error. Can u please let me know why it is happening and what needs to be done for this ?
Thanks
Sreenivas

hi,
did you try this link:
http://xiserver:port/mdt/amtServlet
if so did you try to refresh ?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Photo page doesn't display photos????

my first attempt at updating my site in iWeb 09 and I'm stumped.
I added new photos to my photo page - but the page comes up blank in my website.
(I published to my local folder and then uploaded to my server with Fetch)
Curiously, when I click the "visit" safari icon INSIDE of the iWeb app, I'm taken to a page that DOES display the photos... but the page has a slightly different url.
The functioning page's url has: my domain/THE "LOCAL"NAME OF MY SITE/selected page.
My old site url only contained my domain followed by the selected page of the site.
Somehow iWeb 09 has altered the url????
Any suggestions/thoughts?
thanks in advance

nevermind - it seems to working properly now?????

Yahoo home page doesn't display correctly. All my other sites are OK. Page style is set to "Basic Page Style. What else can be wrong?"

Yahoo home page does not display properly, while all my other web pages do display correctly. I checked View, Page Style, and it is set to Basic Page Style. What else can be wrong?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Book default page doesn't display

I have a portal with several books with a few pages each. the books are tied to a single level menu across the top, the pages are all set to no navigation. The "Return to default page" is set to true and a default page is set.
The problem is that after I initially load the book, if I navigate to another page in the book and then try to get back to the book (using an anchor tag and render:pageUrl or by navigating to another book and then back again) the default page never shows up again. I can get it if I access it directly with pageLabel=pagename, but pageLabel=book doesn't work.
I have tried setting up pageChangeEvents in the handlepostback of the book, but to no avail. The default page just never shows up again.

As I am sure that you know it is tough to dissect portals to send good examples... I do have some more information. I turned off Tree Optimization and it has had a partially positive impact. Now when you navigate between books via the single level menu the default page loads, albeit notably slower.
Where it doesn't work is where my manual book links rendered in the children pages do not reload the default page for the parent book.
Let me explain this a little: I have pages within books, each page is in two column layout with a menu on the left. The top menu item on the left is a link back to the parent book (which should display the default page). This link does not reload the default page, it remains on the current page, the url in the navigation bar clearly contains the book url.
The urls for the single level menu and my custom book link appear to be identical, but one works, the other doesn't:
<i>http://localhost:7001/v2portal/modine.portal?_nfpb=true&_pageLabel=modineNewsRoom</i>
I have tried _nfto=false, but that hasn't worked either.
It is almost like the portal isn't sending control up high enough on the tree to recognize what it really needs to do, which is re-render the book.

[NEVER ACTUALLY BROKEN] seamonkey doesn't display current url

I've scroogled this over and over, maybe I just don't know what to call this problem.
I have a bunch of tabs open in seamonkey. If I switch tabs, or click the back button, the url in the location bar doesn't change.
If I've typed in a url it goes to that address, but then if I switch tabs, go back, open a new tab to my homepage, select a bookmark, the url never changes.
If the background to the url has changed to golden because I entered a https url, then I can go back or switch to another tab that is not secure and the bar stays golden.
If I clear all of the text from the url bar, I can switch tabs, load pages via bookmark, whatever, the url bar stays blank.
It seems the only time the url is correct is right after I enter one. Any change in the url via back, forward, changing tab, new tab is not reflected in the location bar.
This makes it impossible to see what the url of the current page is, which I often do in order to mark and splat into email or docs.
I found a couple of bugzilla tickets from 2002 and 2004, but nothing recent at all.
Has anyone else noticed this?
I'm _really_ hoping this isn't another handy "feature" from google subsidiary, I mean mozilla foundation.
I've tried switching to epiphany, but GTK apps lately seem determined not to work with mark=copy and middle click=paste, but that's a different gripe.
Someone please tell me I'm just failing to find some config option that makes it actually work. Like maybe a check box that says: "Disable Location bar brokeness"?
Thanks for any suggestions or commiseration...
android
Last edited by android (2011-08-16 14:51:18)

You're right, this is tied to the profile.
If I start with -ProfileManager it works correctly.
Ohh, In fact now I've killed and restarted seamonkey and the location bar is working correctly 8-(
Sorry, I guess it had just worked it's panties into a bunch somehow.
I was sure I had restarted.
Thanks for your support!
P.S. i started to mark as SOLVED, but that didn't seem an appropriate adjective.
Last edited by android (2011-08-16 14:52:28)

Monitor occasionally doesn't display imagee/wake

Hello
I'm using an NEC monitor on a MacPro tower (2 x 2.66). I upgraded to a clean install of Lion, 10.7.3. I'm having intermittent issues with my monitor not displaying a picture. I did not have this issue previously wiht 10.6.
Typical scenario -- monitor & computer will go to proper sleep. Hours later, if I click on the wireless mouse or keyboard, the system seems to wake from sleep (can hear the drive spin up, fan, etc.). But the monitor doesn't wake/display a picture. I have to press the power button on the machine to shut it down (usually a no no), and then power back up to get a picture to come on.
Other scenario -- machine is completely powered off, and when I start it up, no picture is display. I power down the machine again, then power back on, screen starts up no problem.
Again, this doesn't happen all the time but enough to be a pain, and I worry about having to always force power down the machine (by holding the power buttton) to turn it back on and try again.
Anyone else reporting similar or advice on things to try?
Cheers

Actually, after gnome 2.6.28 update (i don't remember if there was a xorg update) i must restore the xorg.conf (the minimal config file from xorg log, as from wiki). The key is that you must add a "Virtual" line under subsection "Display" so that xrandr can output in total resolution of both displays. Otherwise it will complain about the screen size not big enough.
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
SubSection "Display"
Depth 24
Modes "1920x1200" "1440x900" "1024x768" "800x600" "640x480"
Virtual 3360 1200
EndSubSection
SubSection "Display"
Depth 32
Modes "1920x1200" "1440x900" "1024x768" "800x600" "640x480"
Virtual 3360 1200
EndSubSection
EndSection

Page doesn't display correctly in Draft process

Any page on our new site looks fine in Contribute CS 6.5 when browsing the site via Contribute or when editing the page in "Edit Page" mode; but when we send a page for review, the Publisher sees PHP errors and no page is displayed. The same PHP errors are seen if the Publisher returns the draft. If we publish the page, it looks fine. It seems like the display issue is only in this one specific mode of Contribute. Does anyone have any advice about why Contribute would display a page fine in Browse or Edit states, but not when browsing a Submitted or Returned Draft? Here's what the page looks like when I open it from the Draft Console:
This happens on any page, from any Contribute Writer, to any Publisher.

Sorry...turns out this was a relative path issue triggered by Contribute saving drafts to a temporary location that broke the path. Resolved by changing the PHP include_once call.

Blog Page doesn't display all entries

I have built a site using Modern Frame template. I am using the Blog page to display member profiles. It appears the front blog page has reached it's page length limit. The oldest displayed post is not the oldest if you see what I mean. Please see http://www.dfgs.co.uk and click on the members page.
If you go to the oldest entry (member), open their profile and click next, you will note there are further entries not displayed on the blog page. Most frustrating. Anyone any suggestions? or have I exceeded the blog page length.
Thanks in advance for amy support.

What I really meant to say is, in the Inspector, how do you extend the blog page to accept more than 50 entries? Help please......

Simple Menu Bar On Home Page Doesn't Display in IE 7

Hello,
I have a really simple xhtml site with a menu bar at the top of the page. It looks great in firefox and works in most version of IE but it disappears in IE 7 and I have no idea how to fix it. The site is staged at www.consurv.net/stage.
Any insight would be greatly appreciated.
Best Regards,
- John

Corel, I know you mean well, but your solution does not work.
You keep posting this all over the place but can't you see it isn't helping people? Safe Mode is useless. I have no conflicts with add-ons, extensions or plugins. Those dozens of "places" files that you say must be deleted...that's utterly insane.
Firefox has created a new browser that is buggy in a major league way and they must fix it. If not, I'm going to use another browser and I will uninstall Firefox.

ICloud's mail page doesn't display .mac & .me mail that Thunderbird captures

Greetings:
I recently discovered after weeks of experiments and combing my iCloud trash and junk folders that if your Thunderbird Server settings is set for imap.mail.me.com or imap.mail.mac.com instead of imap.mail.icloud.com that iCloud will let Thunderbird get your mail but that same mail won't be listed or logged on your online iCloud mail display at all and visa versa! So the only copies of mail I have from senders to my computer with Thunderbird Server set on imap.mail.me.com or imap.mail.mac.com resides on one computer's Thunderbird mail folder instead of also in my iCloud mail folder. Thank God I never purged my Thunderbird folders!
Now that I solved that mystery I have to find a way to copy that one-of-kind imap.mail.me/mac.com mail on one Thunderbird into Thunderbirds on other machines but that's a different issue. I'd like to know whether all that imap.mail.mac/me.com mail still resides on those Apple servers and can be retrieved or at least archived to me. This misdirected server oversight issue must be rare or unknown to Apple because I received no alerts regarding this as a previous .Mac/.Me user for the iCloud conversion or since. I think it would be prudent for all .Mac users to review their Mail app's folders and their online iCloud one. I am going to keep Thunderbird in imap.mail.me.com and imap.mail.mac.com Server settings since at least the mail reaches me as before but still can't be plucked from iCloud in Thunderbird's imap.mail.icloud.com Server settings mode.
Thank you for any assistance.
J Greenidge

It works just fine in Mail.app on my MBP, so it should work on the iPhone as well, shouldn't it?
No. The iPhone's Mail client does not support .eml attachments, or .ics calendar attachments, or several other file types that desktop clients can handle.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

New York Times home page doesn't display correctly

New York Times home appears without any formatting. All text, including links, and all objects (videos, photos, etc.) appear justified left, stacked individually. This means it takes five minutes just to scroll down the page to see the headlines. Have upgraded to Firefox 4, which fixed the problem until the next time the page reloaded. Cleared the cache, checked page style and zoom, all settings are normal and/or recommended. Do not have this problem with any other website or any other page of the NY Times. Only the home page.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Iframe page doesn't display

I have inserted code that works on another page of my site:
<iframe src ="program/Directory/directory.html" width="590px" height="400px" frameborder="0" scrolling="yes">
<p>Your browser does not support iframes.</p>
</iframe>
I inserted the same code, modified the path to a different page, and it does not work on the new page. Is there additional code that needs to be added?
thanks

You don't need an iframe for this. To make a scrolling division or table cell, all you need is a CSS height value and the overflow property.
CSS:
#YourDivName {
width: 150px;
height: 300px; /**height in pixels**/
overflow: auto;
HTML:
<div id="YourDivName">
content goes here
</div>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

WAN Monitor page doesn't display current latency/packet loss

Similar Messages

Maybe you are looking for