Wanna reset N80 to factory default setting

I need to reset the phone back to factory settings and upgraded the firmware
Tell me how could I reset it to default factory.
There arde buttons I have to maintain pushed when powering the N80.
You know i can't type the #(hash or pound) button , it dsiplays *(star) button
When using key code 12345 , it can work as the 2 button doesn't work too

I have tried but encountered same problem and now no button is active apart from the switchon/off button.
You know my phone probabaly choped a virus. You know it can't accept any SIM card, it destroys this latter. I have to run it on offline mode. For exemple when "on" , most of the buttons displays * when pressed.
Used computer for data exchange has a virus too.
Message Edited by amadou on 13-May-2008 03:29 AM

Similar Messages

  • Time Capsule isn't responding/factory default setting?

    I bought a Time Capsule few months ago. Thefirst time it all worked succesfully, it was connected with a iMac i borrowedon a school. Now I plugged it in at home, trying to back-up my Macbook Pro. I got serious problems finding the Time Capsule anywhere and TC flashing amber. I’ve tried to connect the TC with my MBP with usb, but it still don’t show up. I’ve also tried to plug the ethernet cord, but still nothing happens.
    Now I’m thinking that I have to reset the TC to factory default setting, but will it then delete all my  files that I've  transferred to the TC? I would be so sad if these files was deleted, because it’s the only place where I got them. Is there another way to do this?
    Hope for some help!

    First to answer the last part.. a reset will not wipe the files. So take it easy. But what you did is dangerous.. the TC is not a NAS, it is a backup device. you should always keep the files in another location.
    TC is missing fundamental aspects of a NAS.. like a mirrored drive and accessible and replaceable HDD.
    Now you say you plugged it in.. how?
    You should plug the laptop straight into the TC with no other connection.
    If the laptop does not get an IP address from the TC you might need to reset the TC or reset the ethernet on the laptop to auto.
    What does I’ve tried to connect the TC with my MBP with usb mean because the USB cannot be used on the TC to connect to the laptop.
    When you open the airport utility it may not find the TC if it is in bridge.. if that is the case plug it into your normal router and then plug the MBP into the TC. You should use WAN port for the router connection and LAN port for laptop to be on the safe side. See what happens.

  • I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

    I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT201304 If I forgot my password is there any way to remove the restrictions and backup my iPod from the computer? I tried reseting it to factory defaults and then backing it up but it still has the restrictions on.

    I'm trying to remove my restrictions, and i reset it to factory default, but everytime i back it up the restrictions are still on. I don't want to have to register as a new ipod and loose everything i've bought and added.

    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod.
    - If you are up to it see:
    How to reset forgotten Restrictions...: Apple Support Communities
    How to reset forgotten Restrictions...: Apple Support Communities

  • Reset Muse to factory defaults?

    Is there a way to reset Muse to factory defaults?  I see a reset preferences option and an option to rest the windows but not an option to reset everything back to defaults.
    Also, is there a way to save specific layouts?
    Thanks.
    -Brian

    Glad that worked. 
    Here's a direct link to the command in our documentation:
    http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.1.1/CLI_Config_Guide_1_1_1_chapter38.html#task_F5AC1A117B4F499D9DCFC221E2BC20AB
    You can find the full guides here:
    http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
    --Justin

  • I have a P2035 that is stuck on MANUAL for IP configuration, how can I reset this to factory default

    The ip address is set to 0.0.0.0 and I cannot connect to it at all to get to the webportal to reset or change, is there any way to reset to factory default?

    Our process would involve the original owner taking or shipping the phone to a technician to be unlocked. However, since it is out of the warranty period, there may be a cost depending on your location. Call us: http://www.sonyericsson.com/cws/corporate/common/contact/phonelist
    Others may suggest other options, but of course, we would not reccomend these.

  • How to reset HP2035n to factory default

    We changed our lan address from 172.16.1.xxx to 192.168.1.xxx and I need to reset the printer to factory defaults so I can access the web interface

    If you power cycle the printer it should automatically query to get a new IP address from the DHCP server upon reboot.  If you are using a static IP address assignment, then you will need to change the static IP configuration in the devices set-up menu.
    Say Thanks by clicking the Kudos Star if the post helped you.
    Please mark the post that solves your problem as Accepted Solution
    (Although I am employed by HP, I am speaking for myself and not for HP) .....

  • Reset 3GS to factory default settings

    I need to reset my 3GS iPhone to factory defaults (I will be doing this to five different phones ; does that matter?). Can some one direct me to the spot to do that? Thanks.

    Thanks for the replies. I am a procurement guy. The phones are not mine and the users turned them back in with NO documentation and a claim that all data had been wiped out. I gave two of the phones to my kids (17 & 18) and they found all sorts of pictures and other "data" on a "scrubbed" phone. This is why I asked how to reset to factory settings.

  • How do you Reset iPad to factory defaults

    How do you reset an iPad to factory defaults?

    Go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • How do I reset drop shadows to default setting, pse6?

    Drop shadows have disappeared except for 'neon'; how do I get the default setting back?

    Appearance settings have nothing to do with the program preferences. You simply reset them on the appearance panel or the relevant sub-dialogs of whatever effects you are using.
    Mylenium

  • After updating software on IPAD from computer says I have to reset IPAD to factory default and will lose all data???

    After updading software on IPAD2 tells me I have to reset to factory default and will lose all data

    Kinda.
    Read the following in its entirty before doing anything.
    Note that a "Restore" could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • Reset printer to factory default

    I have a HP Officejet 7310 that I need to reset to factory default.  Can you please give me instructions.

    Hi,
    From the printer front panel, click the Setup Button, located above the Right arrow..
    Click the right arrow till Tools will appear, then click OK.
    Click the right arrow till Restore Factory Defaults will apper, then click OK, The printer factory defaults will be restored.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Reset PIX 501to Factory Defaults?

    How does one reset the PIX 501 to factory defaults when you do not have the enable password?
    Thanks!

    You will need to do the password recovery as reseting to factory defaults requires to be in enable config mode.
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml
    after you recover password then issue the command.
    example
    PIX(config)#configure factory-default
    HTH
    Jorge

  • RESET HARDWARE AP1010 Factory Default

    I have 6 APs 1010 that not work properly.
    The Wlan Controller don't see this APs.
    The problem is that this APs have an ip address configured stored (i don't know what is the ip address) because in the old configuration the aps HAVE A IP ADDRESS fixed.
    I must reset the AP to factory default and then reconnect at the LAN , WHERE IS PRESENT dchp WITH OPTION 43.
    Can you help me?
    Thanks
    fcostalunga

    Support for the 1000 series APs is no longer provided in the WLC Code. What version of code are you running?

  • Reset UCS to Factory Defaults

    Does anyone know how to reset a UCS system to factory defaults? We have a UCS lab at the office and we need to be able to reset everything back to factory defaults so that multiple people can learn how to build a UCS system from the ground up.

    Glad that worked. 
    Here's a direct link to the command in our documentation:
    http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.1.1/CLI_Config_Guide_1_1_1_chapter38.html#task_F5AC1A117B4F499D9DCFC221E2BC20AB
    You can find the full guides here:
    http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
    --Justin

Maybe you are looking for