Wanna some informations about using a audigy4 and vi

Hi guys,
I'm using a Soundblaster Audigy 4 in my pc. Right now, I've WindowsXP running. I tested Vista and have some questions now. Maybe someone understand my terrible bad english and will answer?
First: I use a 5. system and have activated? he subwoofer in the creative speeker-settings (second tab "bass management"). I've only the german version so Idon't know the right english word for it. Am I able to do this in vista? And if yes: how? I've the problem that CMSS is working, and I have surround sound but no subwoofer. Is there a possibility to reenable this in vista?
Second: If not, is this enabled by using Alchemy?
Third: Does Alchemy use OpenAL? Or is my performance impacted? I've only an AMD 3200+ Single Core with 2GHz. But Vista is much more secure than XP and I have no nati'vely performance hit with AMD Fusion enabled.
Thanks for the help in advance.

Similar Messages

I need some information about jre 1.5 and jre 1.6.

Hello guys,
I need some information about jre 1.5 and jre 1.6.
Suppose if i have jre 1.5 customized with "additional language support" installed in my my desktop, and later on i install jre 1.6. will this jre over write all the esisting settings which was present in jre 1.5?
In short will the version upgrades disable the features of the old Version even though the old version is present in the desktop?
Thanks in advance for your answers.

In <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
> Hi all, I am developing an acquisition data system for biomedical
>signals and I need to transmit this data from my hardware to PC using the
>USB port. For this, I am writing a device driver for Windows 98
^^^^^^ ^^^^^^ ^^^^^^^ ^^
That's not a trivial step. I would write a small C/C++ program that
exercises your driver (for robustness) just to be sure it's working
right first without crashing your system.
>The problem is that I don't know to use this driver in LabView.
>For now, I think to use a "code interface node" with code writen in C or a
>"call library function" with a DLL.
That's correct. _After_ you got your C/C
++ test program (and USB
driver) above working, then you can convert this little test program
into a DLL or CIN, which can interface with LabView. A DLL might be
easier (slightly) to write, but the CIN will work faster with LabView
and can be designed to be reentrant. The Code Interface Reference
Manual should guide you. Remember, this is a task for an _experienced_
C programmer. You'll need to use handles to pointers into all your
dynamic arrays and such passed into LabView.
After you got your CIN or DLL written, you can use a special CIN
function node to "link" (or bind) your CIN object into LabView's VI
diagram.
SOME THOUGHTS:
There are many hardware devices already on the market today that come
with Windows 98 drivers and DLL (or even CIN) libraries that would work
immediately with LabView. Why don't you save yourself three months of
work and simply buy one of these?
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred
UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would want to claim anything I said?

I need some information about using multiple toggle groups??

Hi,
I am trying to implement multiple toggle groups in javafx(one for radio button and one for toggle buttons).
On selecting one of the radio buttons , the toggle buttons appear and I need to perform some operation based on the selected toggle button value.
But for me only the radio button toggling is working.
The toggle button is coming as disabled.
Please help me out.

Can you post a short, self-contained, correct example demonstrating the problem? The following example works fine for me:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.RadioButton;
import javafx.scene.control.ToggleButton;
import javafx.scene.control.ToggleGroup;
import javafx.scene.layout.HBox;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class MultipleToggleGroupExample extends Application {
@Override
public void start(Stage primaryStage) {
final ToggleGroup radioButtonGroup = new ToggleGroup();
final RadioButton rb1 = new RadioButton("Choice 1");
final RadioButton rb2 = new RadioButton("Choice 2");
rb1.setToggleGroup(radioButtonGroup);
rb2.setToggleGroup(radioButtonGroup);
final ToggleGroup toggleButtonGroup = new ToggleGroup();
final ToggleButton tb1 = new ToggleButton("Choice A");
final ToggleButton tb2 = new ToggleButton("Choice B");
tb1.setToggleGroup(toggleButtonGroup);
tb2.setToggleGroup(toggleButtonGroup);
final HBox root = new HBox(10);
final VBox radioButtons = new VBox(5);
radioButtons.getChildren().addAll(rb1, rb2);
final VBox toggleButtons = new VBox(5);
toggleButtons.getChildren().addAll(tb1, tb2);
root.getChildren().addAll(radioButtons, toggleButtons);
toggleButtons.visibleProperty().bind(rb2.selectedProperty());
primaryStage.setScene(new Scene(root, 600, 400));
primaryStage.show();
public static void main(String[] args) {
launch(args);

Nation advanced search on my IMac, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of

I just caught a thing called nation advanced search on my iMac computer, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of it? What does can it do to my data and is it really a spyware? I just found information in youtube, that it is a spyware, and that it has to be removed, but the information they give for the removal is just working for PCs not for Macs.
Please help!

Thank you all for the friendly assistance provided.
I have found a solutiton to the problem I was having. I hope that many more can benefit from the information I will provide.
I started at Finder, then went to GO selected COMPUTER and then Machintosh HD, then Library, Scripting Additions folder and trashed all that was there. This is what worked for me, if you choose to not delete your content its up to you. Happy Computing.
God Bless!!
This solved my question

I need some information about File Download & File Upload

Hi All,
Can any one help me on this, I need some information about File Download & File Upload.
I read tutorial abt file upload and download but some of methods in tutorial are deprecated so i need clear information abt File upload and Download, if possible Code examples.
Thanks
Ragards
Ravi Golla

Hi Ravi
Check out thses links for examples:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
/docs/DOC-8661#22 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
Otherwise you can simply follow this code for file download
Use the code like this.
1) Create the button and bind the action for it.
2)then write this code in the action.
3) do not write any thing in the init method.
try {
final byte[] content = this.getByteArrayFromResourcePath("C:
xyz.properties");
final IWDCachedWebResource resource = WDWebResource.getWebResource(content, WDWebResourceType.UNKNOWN);
try {
final IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(resource.getAbsoluteURL(), "WD_Filedownload", false);
window.open();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException(new WDNonFatalException(e), false);
5) writr the method getByteArrayFromResourcePath
//@@begin others
private byte[] getByteArrayFromResourcePath(String resourcePath)
throws FileNotFoundException, IOException {
FileInputStream in = new FileInputStream(new File(resourcePath));
ByteArrayOutputStream out = new ByteArrayOutputStream();
int len;
byte[] part = new byte[10 * 1024];
while ((len = in.read(part)) != -1) {
out.write(part, 0, len);
in.close();
return out.toByteArray();
//end
Similarly for file upload
Similarly for upload in to server path also do the same
IWDAttributeInfo attInfo =
wdContext.getNodeInfo().getAttribute("upload");
binaryType =
(IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
uploadedName = binaryType.getFileName();
File filename =new File("
<server name>
<folder name>
"+uploadedName ); );
try {
FileOutputStream out = new FileOutputStream(filename);
out.write(b);
out.close();
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();

Hello please i need some information about the blackberr...

hello please i need some information about the blackberry instant messenger is how does it work , i heard that i send messages for free from a blackberry to a blackberry is it true ? does it need internet ? and does it matter if the other phone is in another country'
thank you alot

Hello,
Here is a page with much information about BBM:
http://na.blackberry.com/eng/devices/features/im/blackberry_messenger.jsp
Hope that helps! If not, Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Where can i find more information about using or nesting formulas

where can i find more information about using or nesting formulas

I am not aware there is a resource specific to nesting functions. this comes from understanding each function (or at least the description in the function help).
a great resource is the function reference which you can see by typing the "=" sign in any cell:
the important thing to note is:
1) what are the inputs to the function and
2) what does the function return (the output)
the if() function (listed above) takes three inputs and returns one output. These forums are a great resource!

LSO : need informations about relation between course and training need

Hi all,
i need some informations about relation between course (object E) and training need (object TN). After some tests, i note in my environment (SAP ECC6) that this objects are not related, there is no occurrence in table HRP1001. So, why ?
Cheers

Hi,
tranining needs (TN) are linked to training types (D).
You can also find information in SAP Service Marketplace
http://service.sap.com/hrfr under France -> Media Center -> Training Needs Management
Regards
Frank

I also need information about use the ProConnect(r) Integ...

I also need information about use the ProConnect(r) Integrated KVM 2-Port Switch to connect a Mac G4 and a PC anyone help
software reviews editor

I suggest you to go to linksys website & it will give all required information ,,,
Or you can try this link ....

Some information about http time out

hi 2 all,
I want some information about http time out,like what all different transactions are used.

Hi,
Could you be more specific? Here is a blog about timeouts:
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
/wg

I need some advice about the macbook pro and iPhone 5. I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it th

I need some advice about the macbook pro and iPhone 5.
I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it through other mail goes through any ideas how to resize it or what it might take to send it?

I agree with LowLister, the best option for you to share the video online is to upload it to your online storage account for example : Box, Dropbox, SkyDrive (All of them provide free storage beginning from 2GB).
You can upload the files which you want to share in this online storage and then they have sharing options in which you'll will get the link of the file to be sent and send the email. You're good to go!
Tip : You can store multiple files for backup purposes.

How i get some informations about audio file?

Hi to all,
i would like to know how i get some informations about audio file, such as its artist, bitrate, file type, duration, ecc...
Any help me?

Ok, but which are the docs of audio format?Again, what does that have to do with Java?
Where i can found these documents?Again, what does that have to do with Java?
Thank you...For nothing.
db

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

Where can I find information about using the measurement tool and log?

Am try to use the measurement tool to measure perspective plain; any ideas?

No one can remotely have "any ideas" to help you when you don't even mention what your problem is nor what your system and workflow are like.
Of course, when you post here,one assumes you have done your due diligence, read the documentation, the user guide, the Help files in the Photoshop Help menu, as well as done Google and forum searches, etc, and we would expect some sensible, detailed information from you.
Teaching someone Photoshop from scratch, step by step, exceeds the scope of this forum—or any other forum.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I Need To Know Some Information About Installing Windows On A Macbook Pro 13

Hello !
Actually Playing My Favourite Games Is A Problem Because I Can't Find DVD Games (Mac Version) For My Macbook Pro So I Found Out That You Can Install Windows 7 Software On A Mac But I Wanted To Know Some Information Like :
- I Know That I Can Install It Using Boot Camp But I'll Need A Windows 7 DVD So Is There Some Specialized Version For Mac ? Or I Just Need A Normal Windows 7 DVD For PC ?
- If I Installed Windows 7, Will I Lose The Mac OS X Lion ? Or I Can Have Both Softwares Together At The Same Time ?
- If I Installed Windows 7, Will It Have The Same Specifications Of Macbook Pro 13 ? (Ex: 2.4 GHz Processor)
- If I Installed Windows 7 And I Already Had Mac OS X Lion, Will The Macbook Lag Or It Will Work Properly ?
- If There's Any More Info That You Know About Installing Windows 7 On A Macbook Pro 13, Please Provide Me With It, Thanks!

This really is a forum about the MacBook Pro hardware. The best place to ask your questions would be the Windows/BootCamp forum. Your MacBook Pro 13 has one weakness that's going to make gaming a bad experience. It has an integrated Intel HD graphics processor, whereas the higher end MacBook Pro's have discrete ATI graphics processors. But the forum will help you out.

Wanna some informations about using a audigy4 and vi

Similar Messages

Maybe you are looking for