Want a Gigaworks 3.1 system or discounted 5.1 system?

A while ago i went to purchase the s700-2 upgrade for my 5.1 gigaworks system but was dissappointed when i found that it had become disscontinued! So now I'm going to any length to get those two satelite speakers.
So I propose that i or someone else buy a gigaworks 5.1 or 7.1 system and i'd take two of the satellite speakers off your hands for $100-$200 CND. I live in Ottawa, Ontario so to make this practical somebody near by would be nice but if anybody has a solid idea on how to make this work from furthur away i'd be open to that as well.
Desperate Customer!!

You can get speakers that are similar to the one in the GigaWorks from Cambridge SoundWorks (the *Works series of speakers is based from Cambridge design). Go to www.hifi.com and do a search for Newton MC00.

Similar Messages

  • I want to reinstall my operating system,How can I back up all my add ons, extensions and personas for reinstallation when Im done?

    I want to reinstall my operating system,How can I back up all my add ons, extensions and personas for reinstallation when Im done?
    Im using fire ftp,downthem all,wot , antiporn pro,and various personas.
    I dont want to renstall them all one at a time, rather I would like to ireinstall a back up like I do with my bookmarks,
    Is this possible??

    See this support article. <br />
    https://support.mozilla.com/en-US/kb/Backing+up+your+information

  • I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?

    I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?

    i also contacted the company that sold me the battery and they offered me my money back or a new battery
    Suggest that you take them up on their offer of a new battery.  Make sure you got the right one for your model MBP. 
    2 separate MBP battery installation Articles:
    1 -
    MacBook Pro: How to remove or install the battery
    2 -
    MacBook Pro: How to remove or install memory
    =================
    Never post your email address in a public forum.  Spam bots roam public forums looking for "spam victims". 
    If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@" in the email address, use instead the actual word AT.
    Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
    Thank you
    I have requested that a HOST remove your email addy.

  • Help, want to buy a new system

    I dabble in video, DV since 1999.
    In January I upgraded to a Sony HDV cam and just cannot go back ;^)
    SW I own is Final Cut Pro 4.1 Academic (upgraded through updates to 4.5 HD) & FCE HD.
    In the past I have used everything from an iBook G4, to an iMac G4, iMac G5, and now a 15" PowerBook 1.5 G4 + 20" Cinema with external drives.
    My PB is a little slow working in HDV but it is not impossible, just very CPU intensive.
    The recent Universal upgrade allows an amazing deal to upgrade my Academic 4.1 to Final Cut Studio, so I cannot afford NOT to do this.
    So the question is IF I want to get a new CPU what should I get?
    The tried and trusted dual or quad G5 or a new Mac Book Pro?
    Or just wait a few months, endure the slowness of my current setup and get something in the fall? To me computers are tools and you get what you need when you need it, but I am nervous of how my pro apps (FC & Aperture) are going to run on Intel since we know they run well now on G5s
    TIA for ANY advice.
    Best,
    -Grey in NC
    http://mullwerks.com

    If 10 was much faster and 1 was slightly faster, I would guess around 8.
    I notice a significant improvement between by DP2.5 and my 1.0PB for realtime performance and render speeds. I don't notice as much of an improvement, however, between my G5 and my old Dual 1.25 G4. If you're doing DV, cuts only, not many effects, you're not going to see as much of an improvement.
    If you do effects heavy, graphics heavy work, and plan to move past DV in the future, you're going to want to get a desktop system.
    This is all completely unscientific, understand. But it's just what I've seen. I've never done any tests or measurements. Your results will also vary based on RAM, hard drives, etc.

  • Want to update the operating systems to Mountain Lion version 10.8.2

    Want to update the operating systems to Mountain Lion version 10.8.2 on my Macbook6,1 from Mac OS X Version 10.6.8. Will this affect the performance of my computer in a negative way, and if the benefits outweigh it? Thanks.

    While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • I have a isic card and i am a student and i want to see if you have any discount for app for apple and for the i phones and if i have the b.o.box in the us can i buy the iPhone from your site

    i have a isic card and i am a student and i want to see if you have any discount for app for apple and for the i phones and if i have the b.o.box in the us can i buy the iPhone from your site

    Apple does not offer educational discounts on the iPhone. I don't know what you mean by "app for Apple".
    Regards.

  • I want all possible router & switch system error messages

    I want to research about system message classication topic
    so I want all possible router & switch system error messages
    Could you send it me?
    Kind regards.
    -- Meta --

    Dear Grace
    Are you using EOIO for this scenatrio.
    In this case you have to cancel/delete the first message which is in holding state.
    If you are not using EOIO and still the messages are in holding state then the receiver system must accept the message (in your cae the DB)
    Regards
    Sourabh

  • ,i want to update the item system status of the CONTRACT (va42) to TECO

    Hi,
    here my requirement is that ,i want to update the item system status of the CONTRACT (va42) to TECO
    Which function module i have to use for this.
    I have checked the bapi BAPI_CUSTOMERCONTRACT_CHANGE .
    But i cant find any field related to system status update.
    can any one advice me how i can i solve this
    thanks in advance.

    I got one function module for this.

  • I have a G3 powerbook and want to Upgrade my Operating System to OS X

    Hi!,
    I have a G3 powerbook and want to Upgrade my Operating System to OS X.
    Here's the specs:
    1998 Powerbook G3 14.1 TFT/300Mhz/1MB/64MB/8GB HD/4MB Video/DVD/
    Modem/ Family Number#M4753
    Current Operating System:
    9.2.2
    More Info:
    I looked on the Apple site and the only system requirement I don't have is that I don't have Built-In Fire Wire. But, I do have a slot card that enables me to use Fire-Wire devices.
    Is there any safe way or Tricks I can use to get around this and Upgrade to OS X on my computer? OS X is SOOO much cooler and will make my work much easier!
    Thanks for your suggestions!
    Luis

    Hi Normnod,
    Thanks for your response. Below I have out some more specific info.
    As you know, I have a G3 WallStreet and want to Upgrade to OS X.
    Here's the specs:
    1998 Powerbook G3 14.1 TFT/300Mhz/1MB/64MB/8GB HD/4MB
    RAM is expand to 198MB, I have over 5 GB available on the HD.
    I think it’s a ‘PDQ’
    Video/DVD/
    Modem/ Family Number#M4753
    Current Operating System:
    9.2.2
    Trying to Install
    OS 10.3.5, do I need to get a hold of 10.2?
    More Info:
    I looked on the Apple site and the only system requirement I don't have is that I don't have Built-In Fire Wire. But, I do have a slot card that enables me to use Fire-Wire devices.
    Today:
    I just got very close!
    The OS X disk I have is 10.3.5 (Is that Panther or Jaguar?)
    I used Xpostfacto 4 and tried an install. I got to the installer and then it checked out my machine and then said:
    "Bundled Software cannot be installed on this computer"
    Is there any safe way or Tricks I can use to get around this?
    Thanks for your suggestions!
    Luis

  • I have used Pages 09 and Keynote without any major problems until this new update. I have read many of the fixes but have a problem. When you get Pages 09 and Keynote back, Apples continues to want to update the 09 system. So it stays updated.

    I have used Pages 09 and Keynote without any major problems until this new update. I have read many of the fixes but have a problem. When you get Pages 09 and Keynote back, Apples continues to want to update the 09 system. So it stays updated. I have had to turn off my auto updating that was nice but I'll do it one at a time in order to keep the Pages 09 and Keynote. When something works don't mess with it. Any fixes out there?

    I can't say that I have had a problem playing videos in Flash because I could always play them in browsers other than Firefox.
    In Firefox Tools>options>Advanced Hardware acceleration is turned on.
    I don't know if that is different that tuning it off and on in Flash or not, but for now it is a moot point.
    As I stated in my previous message, after following all earlier suggestions/instructions nothing helped. But The latest one, someone suggested that maybe version 17 of Flash might be a stable version.
    I made no other changes except to install it, a few days ago, and so far so good.
    Many thanks for your help,
    Giovanni

  • I have the original iPad and want to upgrade the operating system and do not have a home computer available to go through iTunes to upgrade it. Is there a place that I can take it to upgrade it for me?

    I have the ipad1 and want to upgrade the IOS system and do not have a home computer to do it. Is there someplace I can take it and have it done for me professionally? I checked with Best Buy and they declined.

    A physical Apple Store. If you want to do it yourself, you can use any computer with an Internet connection.
    (88243)

  • I have an older MacBook Pro using 10.4.11 and want to use new operating system to use the latest iLife. Can i install 10.7 on an external hard drive and use the external hard drive to run new system while leaving my old system intact?

    I want to use a new version of iLife (for iMovie and iDVD) but am currently running OS 10.4.11, which won't work with the newer iLife programs. Can i install OS 10.6.3 or 10.7 on an external hard drive, boot to that hard drive and work with the new software (installed on the external hard drive) using my MacBook Pro  (circa 2005/6) as the engine while leaving my laptop running 104.11 the rest of the time?

    Yes, you can use an external drive. To upgrade, however, means:
    Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
    Access the App Store with your Apple ID and purchase and download Lion.
    Your computer must meet system requirements:
    Snow Leopard General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMe service; fees and terms apply.
    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud.

  • Want to access network file system using JFileChooser

    Hi all,
    I want to access and display the drives of a network file system in the JFileChooser dialog. For example by specifying a machine name, I want to access the drives(C, E, F....) of that machine. Can anyone please guide me on how to go forward with this.
    Thanks in advance

    Any links or guidance provided would bhi helpful

  • I have mac os x 10.6.8 and I want to upgrade my operating system

    How do I upgrade my operating system.

    First, which OS do you want to upgrade to?
    Here are some requirements for the OS X versions after Snow Leopard. See if your MBP qualifies for any of these.
    OS X Lion 10.7.5
    OS X Mountain Lion 10.8.5
    OS X Mavericks 10.9.1
    Mavericks is free. OS X Lion and Mountain Lion would need to be purchased and you would have to call Apple Sales (800-MY-APPLE  USA) to purchase a redemption code; then redeem it at the App Store.

  • I want to replace my main system drive:

    Hi all:
    I can't seem to find a clear answer on this:
    I bought some new drives and would like to replace my main system drive with one of the new drives. It's a bigger drive, 1TB as opposed to 250Gb.
    Is it true that I can use Disk Utility to re-image the main drive onto a new drive, then replace the previous system drive with the new mirrored drive?
    Please advise. I've found nothing on the site to help me out other than a previous post that seems to indicate that I can do this. If you have details, please share them. Thank you!
    -Pete

    Either Carbon Copy Cloner or SuperDuper will be more convenient.
    You can, in fact, use Disk Utility for this without creating a disk image in between. You just need to go to the Restore tab and drag the current volume (from the sidebar) to Source and drag the new volume to Destination. Make sure you drag the volume (indented under the drive) and not the drive to the Source and Destination fields; this is a volume to volume operation. Check the +Erase destination+ box to make the copy exact. After double-checking that you did not reverse the source and destination , click on the Restore button.
    The inconvenience is that you can't be booted from the volume you want to duplicate. So if that volume is your startup volume, you need to restart from the Mac OS X installation disc and run Disk Utility from the Installer's menu bar (or start up from another bootable volume).
    The non-Apple cloning utilities use a different method for duplicating, and they can duplicate the startup drive.
    Since you have a Power Mac G5, you can mount the new drive in the second internal bay. All the cables and screws are already in the case. There is no need to "replace" the existing drive, and there is no functional or operational difference between the first and second bays.

Maybe you are looking for

  • Is it possible for a multilingual Flash application that pulls in dynamic text?

    My client requires an app that displays 6 languages, including English, Arabic, Simplified Chinese, Korean, Greek and Vietnamese. The content for all 6 of these languages must also pull data from either Flash vars or XML. I heard that there are probl

  • Oracle (de)Install problem

    Hi there, I tried to installed Oracle 9i in my NB and find below problem under Win XP Professional, P4, 256 Mb RAM, 3 Gb Free space (after copying the installer): 1. Initially, installation didn't work at all with error message "please install Java 1

  • How can I get my ATT iphone to connect to my Apple Network? (internet access code.s airpo

    How can I get my iphone with ATT service to connect to internet using the Apple Network that all my other laptops and macbooks find easily and accept.  The iphone only "discovers" some random DSL code that is NOT mine and that needs a password.  Help

  • Photosmart Plus B210a

     I have the Photosmart Plus B210a, the cartridges that came with the printer barely worked so I took them back for new ones. The store insisted on taking cartridges from another box of the same printer. Now my printer will not print at all and is say

  • Duplicate appointments in iCal from Mail

    When I open an email .vcs attachment in Mail 1.3.11 it places 2 appointments in iCal 1.5.5 I found the script to remove duplicates but I am still having the same problem when I open .vcs attachment in Mail