Want a step by step scenario for sending file from PCK to XI to other sys.
Hi all
Want a step by step scenario for sending file from PCK to XI to other system
i just want to check the flow of messages from PCK to XI by doing file to file scenario.
Thanks
Hi-
Check this links
http://help.sap.com/saphelp_nw04/helpdata/en/32/92e5bced6cb441af4360cfcb8142f3/frameset.htm
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4256 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Similar Messages
-
Send files from SAP ECC5.0 to websphere MQ
Hi
What I need or use (ABAP) for sending files from SAP ECC5.0 to Websphere MQ. I've been reading post but mention PI/XI .
Thanks in advanceThe Question is not so clear on how you are intergrating between SAP and Websphere.
But just incase if you are using WebSphere MQ Integrator(WMQI) SAP IDOC solutions are preferred.You can probably send idocs from SAP. -
I want to prepare FONDRY INDUSTRY scenario for MM ponit of view.
Dear Saper,
i want to prepare FONDRY INDUSTRY scenario for MM ponit of view.
kindly help me .
thanks.
saran.hi saaavanakumar
regarding foundry industry here process is different from other
here there my might be scenario where a company sends the material and pattern to sub contractor , for pattern notional cost comes in to picture,this is info i had
if my reply had helped u assign some points -
Components required for sending Email from SAP [Kernel Release 46D]?
Hi All,
Can somebody please tell me the components and the Configuration settings required for sending Emails from SAP system[Kernel Release 46D] to the mail server[Win NT] using SMTP.
From note 455127, I understood that "Sap Internet Mail Gateway" is required and there are other settings to be done. (SAPconnect with RFC can only be used as the Kernel version is 46D)
It will be great if somebody can explain me in simple steps if He/She has done this before.
Thanks,
VarunVarun,
sendmail comes with UNIX OS, there are versions of sendmail programs available for Windows too, but i guess you have to purchase them.
Another alternative is a discontinued product called SAP Exchange connector, if you have a Windows environment and MS Exchange server as your mail server, you could use a SAP exchange connector and get your SAP Email config done.
Regards,
Siddhesh -
Required Changes in FCC Paramenters for Sender File Adapter.
Hi
I am Doing File-File Scenario.I am using FCC in the Sender File Adapter. I have defined the structure as below.
My Source Structure
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source xmlns:ns0="http://city.net/filecopy">
<Message>
<Id>123</Id>
<Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
<Body>Helloworld</Body>
</Message>
</ns0:MT_Source_FILE>
So for the above structure, I have defined the FCC Parameters as
Document Name: MT_Source (Message Type)
Document Namespace:http://city.net/filecopy(Namespace)
Recordset Name: Message (root node)
Recordset Structure: Message,1,Head,1
Recordset Sequence: Ascending
Recordsets per message:1
Keyfield Type: string
In the Table Rows I have defined
Message.fieldFixedLengths: 3,10
Message.fieldNames: Id, Body
Message.fieldSeparator: ,
Message.endSeparator: 'nl'
Head.fieldFixedLengths: 3,8
Head.fieldSeparator: ,
Head.endSeparator: 'nl'
Head.fieldNames: Id, Filename.
My Input Text file
123,Helloworld
123,text.xml
I am Getting Output as
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/filecopy">
- <Message>
- <Message>
<Id>123</Id>
<Body>HelloWorld</Body>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I should get Body field after Head Structure as in the Source Structure, So Please what changes do I need to do in the Parameters Specified above to get the desired Output.
So How should I define the FCC Paramenters For Sender File Adapter ?
Any Help Would be Appreciated.
Regards,
VarunHi Everyone,
I could Succeed to some extent.
I have defined the parameters as follows
Recordset Structure: Message,*,Head,1
Key Field Name: KZ
Key Field Type: integer
In the table, I defined the Parameters as
Message.fieldFixedLengths:1,3
Message.fieldNames:KZ,Id
Message.keyFieldValue:1
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
Head.fieldFixedLengths:1,3,8
Head.fieldNames:KZ,Id,filename
Head.keyFieldValue:2
Head.keyFieldInStructure:ignore
Head.fieldSeparator:,
Head.endSeparator:'nl'
Message.fieldFixedLengths:1,11
Message.fieldNames:KZ,Body
Message.keyFieldValue:3
Message.keyFieldInStructure:ignore
Message.fieldSeparator:,
Message.endSeparator:'nl'
My source text file
1,123
2,123,test.xml
3,Hello World
my output is
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Source xmlns:ns="http://city.net/FileCopy">
- <Message>
- <Message>
<Id>123</Id>
</Message>
- <Head>
<Id>123</Id>
<Filename>test.xml</Filename>
</Head>
</Message>
</ns:MT_Source>
I got the output almost correct except I am not getting the value in the Body
Any help would be appreciated.
Please correct me If I am wrong.
Regards,
Varun
Edited by: Varun on Sep 2, 2008 12:06 PM
Edited by: Varun on Sep 2, 2008 12:15 PM -
How to raise Alerts for Sender File Channel
Hi All,
For Sender File Channels , we can find out the status of the adapter through RWB as to whether it is Content Conversion related exception or Folder path not found exception & etc .
I wanted to know as to whether there is any way where can rasie alerts for Sender File Channels (similar to what we do for Reciever File Channels) as well.
Regards
Vinay P.I found it myself .
In Alert Configuration while we are adding alerts for a particular aler category , the following parameters needs to be checked .
Connected to Message : Not Relevant
Sender Service/Party/Interface/Namespace needs to be mentioned.
Adapter Type should be selected as File -
Settings on Microsoft Exchange Server for sending Email from BW to emailid
Hello Everybody,
I wanted to know that for sending Email from SAP System (that is via Information broadcasting feature of BW )to Email IDS of individuals do we need to make any configurations on Exchange Server as well or some RFC between Microsoft Exchange Server and BW .I have made all settings for SMTP through SCOT transaction but still not able to send mails.From our Exchange Server,the connector is removed ,do we need to reconnect it for this purpose.kindly please tell me wt all configurations do i need to make on Mail server for sending Emails as iam not able to do the same now.If somebody can send a PDF/Word document in support for the same on my email Id [email protected] ,i shall be highly obliged.Your help shall be appreciated ,kindly revert at earliest.
Regards,
saumyaHi Somya,
Looks like you are deep into Information Broadcasting. I am sure you must have seen this, still sharing with you -
SAP Notes -
875136 - Node ID is missing in the status message for RFC connection
455140 - Configuration E-mail, fax, paging/SMS via SMTP
regards
Vikash -
I want to be able to open up a file (from an app or mobile website) to show a customer, then be able to send it to them. So add a 'Email this file to Client' link that opens up an email with file attached. Is this possible in any of the Adobe Creative Cloud Applications?
Thank you for the feature request.
Besides attaching the file to an email yourself, you can use file syncing and the Send Link feature to email a link to your customer.
File syncing is built into the Creative Cloud desktop application that you use to download and install Adobe desktop applications. Files saved to the Creative Cloud Files folder on your computer are synced up to a cloud file storage. From the Files page in a browser at https://creative.adobe.com/files you can used the Send Link feature.
The email will be sent and received more quickly since no file is attached, and your customer can download the file from the url you share. -
FCC Paramenters for Sender File Adapter
hi
I am using FCC in the Sender File Adapter. I have defined the structure as below. Fields ID, Filename, Values will be generated at Runtime as I have defined Used Defined Funtions for Both.
Only I will Pass the value in Body. i.e "Hello".
So How should I define the FCC Paramenters For Sender File Adapter ?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
<Message>
<Id>123456</Id>
<Head>
<Id>123456</Id>
<Filename>sample.xml</Filename>
</Head>
<Body>hello</Body>
</Message>
</ns0:MT_Source_FILE>
In the source text file, Do I need to send only "Hello" value because ID and filename will be generated at runtime?
Regards,
Varun
Edited by: Varun on Sep 1, 2008 6:00 PMHi,
Refer this link:
http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Nithiyanandam -
if we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3 . kindly suggest..!
Hello kumar kalptaru,
Thank you for participating in the Apple Support Communities.
It sounds like you're wondering how to hang up a call besides using the Sleep/Wake button.
Other than this, you can tap the red hang up button on the Phone app. See the iPhone User Guide for more help:
While on a call - iPhone
End a call. Tap or press the Sleep/Wake button.
Best Regards,
Jeremy -
An advanced solution for sending email from Solution Manager (or CRM)
Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
AndyHi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy -
I want to send files from my laptop to my mobile
hai ,
Is there any procedure to send files from my laptop to my mobile nokia 5800 using wifi . if so please reply me as soon as possible.
I dont have blutooth for my laptop.every time searching for data cable is not possible for me .
Moderator's Note: E-mail address was removed. It is unwise to publish personal contact information on a public forum.You could try something like SymNC from Telexy:
http://www.telexy.com/Products/ProductInfo.aspx?ProductId=18
Or one of the individual products, if the whole package is too much for your needs. -
Disable "always do this for Picture files from device name " checkbox
Bluetooth users should know well that as you send a file from your remote device to your laptop, there will be a notification on the lower right side of the screen. As you click the notification, it will show a popup window asking for your action.
Now my problem is I seemed to have ticked the checkbox stating "Always do this for Picture files from <my handphone>" while transferring pictures from my handphone to the laptop. I clicked save in folder: <directory>. Now, every time
I transfer pictures to my laptop through bluetooth, it becomes automatically saved into the <directory> and I regret it, I want it to let me choose where to save the file again like previously. How should I do that?Hi,
Do we have a bluetooth manager in use?
If yes, check here:Enabling windows 7 to allow bluetooth file transfers without confirmation
Regarding receive files from bluetooth, Windows 7 will always provide the steps below:
Transfer Files via Bluetooth Between Phones & Windows 7 PCs
Please verify if we can do some changes on the phone side.
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Sending mail from one sap box to other sap box
how to send mail from one sap box to other sap box?
Hi Pavan,
To send mail Internally check this sample code.
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'<b><email_removed_by_moderator></b>.
Data: p_email(25) type c value <b><hardcoding_removed_by_moderator></b>.
END OF SELECTION SCREEN ------------------------------------------- *
--DATA DECLARATION--
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
BELNR LIKE BSEG-BELNR,
ZUONR LIKE BSEG-ZUONR,
GJAHR LIKE BSEG-GJAHR,
DMBTR LIKE BSEG-DMBTR,
HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
TXT50 LIKE SKAT-TXT50,
SAKNR LIKE SKAT-SAKNR,
KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
BELNR LIKE BKPF-BELNR,
BUKRS LIKE BKPF-BUKRS,
GJAHR LIKE BKPF-GJAHR,
BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
-- END OF DATA DECLARATION--
--- CONCATENATING AND ARRANGING DATE -
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
--- END OF CONCATENATING AND ARRANGING DATE -
--SELECTION FOR BSEG--
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
ZUONR = lv_formatdate.
*--END OF SSELECTION FOR BSEG--
--SELECTION FOR BKPF--
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
--END OF SELECTION FOR BKPF--
--SELECTION FOR SKAT--
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--END OF SSELECTION FOR SKAT--
----POPULATING EMAIL SUBJECT -
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
----END OF POPULATING EMAIL SUBJECT -
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
refresh it_message4.
LOOP FOR BSEG -
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*-CHANGING DATE FORMAT FOR BKPF--
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*-END OF CHANGING DATE FORMAT FOR BKPF--
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
POPULATING EMAIL BODY WITH DATA -
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
END OF LOOP FOR BSEG -
endform. " POPULATE_EMAIL_MESSAGE_BODY
To send an mail with external attachment check this one
first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
Then include that report in the following report and copy the same code and paste it there
*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
<b><points_request_removed_by_moderator></b>
Cheers,
CHAITANYA. -
When I try to send file from Reader as email it is attached without .pdf extension
Hello,
When I try to send file from Reader as email it is attached without .pdf extension.
What could be a cause of this problem?
TIA.Hello I got more info about this strange scenario. This happens when our user want to send a pdf file embedded on www page. Web application uses this control to display pdf files: Winnovative PDF Viewer Controls for ASP.NET and Windows Forms
It is strange that when I try on my computer I will get file name with pdf extension, but people in different location get it without .pdf extension. I have no idea what happened, and now I am not sure if it is problem with Reader.
User reports that he uses Adobe Reader version 11.0.0
Maybe you are looking for
-
Custom Report .csv export problem
I have set up a custom report so I can download a csv file with all orders starting 4/1/2014. It is working well except for one small hiccup. Whatever is in the very first position in the first row (the first column header) has a few weird control ch
-
How do i fix my photoshop cs2 for windows 7?
I got a new comp thats is running windows 7 and installed my photoshop cs2 software and at first everything seemed fine until i noticed some differences in the performance. When i try to draw witht he brush tool it is way to slow, for example i draw
-
Adding multiple clips to a track
I read the manual and I know it`s possible to add more than one clip to a single track. I never done it before. I just want to add 3 clips one after the other. I`d like to know if this works well, if there isn`t any known issues. Is this compatible w
-
Outlook Keeps disconnecting and connecting right away using ZenLoadBlancer
Hi Guys, Have you seen this before? Im not sure you are familiar with this load balancer but if you are can you help me with the configuration? Everything is working fine except outlook a few times an hour disconnects and reconnects right away. I h
-
About a week ago, I was trying to print my Taxes using the PDF function of my adoby reader. I received the following message: ACROBAT failed to load core DLL. I have tried to reload ADOBY READER, load a new ACROBAT program & even attempted to load