Want a wireless video camera that can stream to the Internet...

What are my choices...
Are there any clear winners?
Thanks,
Jerry

Hi,
A General List http://www.mac-compatible-web-cam.com/
10:08 PM Wednesday; February 23, 2011

Similar Messages

Looking for a sports video camera that is compatible with the mac

Looking for a video camera that can record sports well and is also compatible with the mac. I've been using iMovie to edit videos for a highlight reel of my highschool soccer games that I coach.

I like Sony HD MiniDV (HDV) Handycam Camcorder - HDRFX1000, but I have also used several older Sony (DCR-TRV17 and DCR-TRV70) and Canon (VIXIA HV20, VIXIA HV30, and VIXIA HV40) tape-based Firewire-equipped camcorders with good results.
I prefer tape-based Firewire-equipped cameras because of their IEEE 1394 transfer speed, compatibility with iMovie HD, and ability to serve as the source recording directly into iMovie when desired. If none of these characteristics is important to you, other Mac-compatible camcorders with suitable zoom ranges and lens speeds for the light levels you encounter should also do nicely for recording at your games.
You do not say which iMovie version you are using, but you can find about known compatible camcorders by searching for the info in a search like this one.
Message was edited by: EZ Jim
Mac OSX 10.9

Safari is the only application that can successfully use the internet.

Dear all,
I have been having internet problems for the past couple of weeks, that started fairly suddenly. The problem is that any of my internet-using applications cannot use the internet, apart from Safari. Browsing and downloading through Safari work seamlessly, but all other uses of the internet fail.
For example, Messenger for Mac gives me a message indicating that I am not connected to the internet. Skype also does this, and the iTunes Store tells me that the host is down, and that I should check my internet connection and try again. Software Update is another application that cannot function as a result of this problem.
I am living in student halls at university, so my internet connection is an ethernet cable plugged into the wall, and therefore I have no access to the behind-the-scenes things. I have contacted my internet provider (Ask4), to ask if they'd changed anything, but they said not, but are very willing to do anything they can to help me.
It has been suggested to me that I simply create a new location in network settings, and that this would remedy the problem, but it didn't work.
Another suggestion was to temporarily disable the firewall, but this also didn't help.
Does anyone have any suggestions as to what I could try next, because I'm all out of ideas, and I can't find anyone with the same problem.
Any help would be well-appreciated.
Thanks
Tom

i figured it out. reboot the phone. its an ios4 bug that once you turn the orientation lock on once and back off, the photos wont rotate and you have to reboot. hopefully a fix comes soon

Can recommend a slim/mini video camera that is compatible with FCE ?

I have some technical problem.
My video camera is too big in size to film in between spaces. My friend has build a model of a few cluster of flats. He wants me to help him film the spaces between the flats from the bird's eye perspective. By bird's eye perspective, he meant to say he wants me to record what the bird can see if the bird fly surrounding the flats & between the flats & then make turns surrounding the buildings.
My present video is too bulky to squeeze into those small models.
I think the only way is to purchase a video camera that is so slim like a shape if pencil so that it can go in between the blocks.
Where can I buy this ? Will this type of video (if exist) records video in good quality & compatible with FCE4 ?
Thanks

Hi(Bonjour)!
You should look in Radio-Controled airplane model equipment. There are mini camera that mount on the model and broadcast the video on the air to a receiver that can be connected to a camcorder. You can connect them on any VCR
See example:
http://www.vimeo.com/2189945
one of the supplier of the KX-171 :
http://www.rangevideo.com/index.php?mainpage=product_info&productsid=96
Other models:
http://www.trendtimes.com/camera.html
http://www.wonderhobby.com/smmiwicospyc.html
Google with "how to install a mini camera in a model airplane?"
Michel Boissonneault
Message was edited by: Michel Boissonneault

How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
At the same time I need to output the streaming to a videoprojector.
The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
Do I need to use a different port for the projector? Should I buy a video card?
Can't connect the camera via USB as that is too slow and it will freeze.
Many thanks for all your help
Best
Faeve

You might do better on a forum other than this one, which is "Using iPhone"

Premiere CS3-Is there a video/Website that can show me all that it can do?

I was just wondering if anybody knew of a video/website that can show me all the effects etc of premiere cs3.I have looked through the tutorials that came with the product but feel that they don't really offer any great detail as to what the effects do or what's in the pallet.
I do realize that there are tutorials that you can pay Adobe $150 or so for but I'm looking for something a bit less expensive than that!
Many Thanks

Dougie,
I've not seen, what you're looking for, all in one place. I've got a myriad number of books (CS2), and have downloaded many tutorials. What it seems is that one can explore a feature at a time, and then catalog that knowledge, before moving on to the next Effect. The Help files F1 probably put as much in one place as any book in my library. Unfortunately, one needs to "read between the lines," to get the full potential of each Effect - that, and check out discussion on it here. Some of the names can be a bit confusing, and when looking to do something, picking and using the right Effect might take some time, and be partially counter-intuitive too.
One of the best ways that I've found is to experiment with the Effects, and their settings, after reading up on them in F1. Then, if things still do not seem to be working, formulate a question, "I want to do X. What Effect should I choose?" and post it here.
Going back some versions, there was a great book on the Filters in Photoshop. About 1000 pages of nothing but using the Filters in that program, plus a vast number of free and for-pay Plug-ins. Very comprehensive and all in one spot. I still drag it out, though I'm probably 5 versions of PS away from it and the list of included Filters has expanded exponentially. Wish that I could find one for Premiere.
PP does have one nice feature - the search at the top of the Effects Panel. Only problem is you need to know the name of the Effect you're looking for. F1 will help (no pun intended) there. Still, you need a Rosetta Stone to find out the one you "need," and what its official name is. Same problem often exists with the tutorials. If you know which Effect you will need, or the name of the result, i.e. "Picture in Picture," you can search for that. If all you know is what you want to accomplish, but not what it is named, not so often. Still, watching a tutorial that does not address your immediate need, will still provide you with great info that you can likely use later.
"Classroom in a Book," is a good start (as are the tutorials around) on the Tool names and uses, plus many of the Effects. It's a bit sparse in the "why," but strong on the "doing." Since NLE is a lot of "art," the "why" is important to me, and overshadows the "doing." Sometimes, the exercises do connect-the-dots a bit better, on the why end of things.
Some day, I hope to have used every Efect with every variation, and actually remember what each one did, and why I used it. Not likely until CS50 though.
I also strongly recommend spending a few days with these forums, just reading. Do not skip the previous versions, even if you have only worked in CS3. A lot of the answers apply (some with modifications, but others more directly) to later versions, especially when looking for the choice of Effects, and tailoring them to your needs. Do not forget to use the "First," and "More" links on the forum pages, as there are often many pages of responses. This will also get you up to speed on the naming conventions used. When someone calls the Transition, "Fade to Black," someone else will point out that in PP, it's "Dip to Black."
I had it easier than most, 'cause I came from a cinematography background, with many years using Photoshop for advertising print output. Still, I found that I needed a good glossary of NLE terminology, as I discovered that the language had changed, or was just different. Gotta' learn something new every day of your life.
Hunt

Hi I just purchased a WVC54GCA wireless video camera I am having a problem with the setup software

I just purchased this wireless video camera and I am trying to set up the wireless key. I have put in the SSID and then the option of WEP (128 bit) or 26 character key. I then try to input the 26 character key and the text box can't take that number so I am supposed to click next and enter the key on the next page..... only it is at the last page where you would save the settings and I don't see anywhere to edit it. I know I get a bit hurried is there something I am missing?? I would appreciate any assistance you can offer. Thanks a ton

If you are trying to configure your Camera using the Setup disk, you can exit from the setup and configure all the settings on your Camera Manually.Follow the Instruction below to Configure your Camera manually..
1. Connect your Camera to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.115.
Use admin for both Username & Password in lower case...It should open your Camera set-up...
3. Once you get to the set-up page you can follow this link to change the Camera Settings...While changing the Camera settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(router and camera)...Also make sure to change the camera's default IP to match your network and Gateway Address should be your router's address...ex. Camera's IP Address : 192.168.1.115(assuming your router's default address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1.
4. After configuring the Camera you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Camera from the computer and power cycle both the devices(Camera and Router)...Your camera should be configured...
In case if you don't get the Camera set-up just leave it connected to your computer and reset it for 30 seconds...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Camera, wait for 30 seconds and re-connect the power cable...Follow Step 2, Step 3 & Step 4...
Click Here and follow the instructions to configure the camera with the Wireless Settings.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

I don't think Finder does this (I've tried).
iTunes does though. Where you can set artwork or the "poster frame"...
This may not be what you want but if it helps, I know 2 ways do this is
Open the video in QuicktimePlayer7 | View | Set Poster Frame (even then, you might need to save it as .mov (ie in a 'mov container').
Drag the file into iTunes and set the artwork (as in http://www.dummies.com/how-to/content/adding-album-cover-art-or-images-in-itunes .html)
From there, iTunes will use that frame as the "poster frame" ie the photo/frame that shows when you browse your videos. Which is what you want, but limited to iTunes.
When I do either of these above, the frame I set does not show when exploring files in "Finder" (or in the other Explorer tool I use called "Pathfinder").
So it maybe, that exactly what you want, is not possible.

Video Camera that is FCE friendly?

I have a JVC Everio GZ-MG37U. It records using .mod files.
Can anyone recommend a video camera that works well within iMovie and exports to Final Cut Express well?
Currently mine will import to iMovie just fine, but when exported to FCE all the pictures and video is zoomed in (ie: picture or video of girls face is zoomed into her nose).
Thanks,
Phil

Although it is possible, it is not a good idea to capture in iMovie and transfer it to FCE.
You should stick to one or the other.
Regarding cameras for FCE, any tape-based DV or HDV camera will be fine. AVCHD cameras using memory cards etc. will also work with FCE 4.

I want to build a website that can send out email automatically using c#

I want to build a website that can send out email automatically using c# and sql server when a date has reached. I have googled but nothing works.
http://www.quartz-scheduler.net/documentation/quartz-2.x/tutorial/using-quartz.html
I came across this, but I am still unsure what to do.

I came across this, but I am still unsure what to do
http://forums.asp.net/

When I connect my digital camera to my iPad it will only download the stills, not the videos. How can I download the videos? I have the USB and HDMI connectors for the iPad.

When I connect my Leica digital camera to my iPad it will only download the photos not the videos. How can I download the videos anyone please?

If your camera has an SD memory card, use the camera connection kit & the SD card to download to the iPad. That's what I do.
Another way that will work. Download the video(s) to your computer. Then you can use a USB flash drive & the camera connection kit.
First, Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie file into the folder. The movie file must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie file should appear & you can import.
 Cheers, Tom

When does d4s get added to the list of camera that can tether on Lightroom

when does d4s get added to the list of camera that can tether on Lightroom 5?

Well, I got very tired of waiting for Adobe to support my Nikons so I use a Camranger, their computer and tablet app and tether wirelessly to LR. Yes, there is a bit of a delay amounting to a few seconds but in practice my customers love it and have not complained. I use the few seconds to better connect with them, answer questions, etc. Being wireless gives me more range of movement and I have one less cord. The Camranger goes in an old phone holster that clips to my shirt or pants pocket, connected by a 3 ft cord.
You need to enable auto import in LR and point it to the folder that Camranger saves the files to. Since it is an import you can use presets if you wish. I've not seen a downside yet and Camranger has support for new cameras very quick like. An added plus is having full wireless functionality for your camera via the Camranger apps. You can change any setting, focus, use live view, etc.. using a phone, tablet or laptop.

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.

If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

After my last download I now have video adds that show up in the broswer from time to time. How can I get rid of them.

on my last down load of firefox, I not have two issues that occur, One every once and awhile I get a video ad that shows up in the lower left corn of the browser. I have uninstalled your software and reinstalled and it is still there. Also I get a web site of inksr.com that my trend micro blocks everytime I go to a new web site within firefox. Both of these have started after I was told to redownload your software in order to get the updates to work and not be blocked.

You probably have malware or adware installed on your computer.
I note from your system information you have ''TopArcadeHits 1.0 '' <br /> That is something a lot of users complain about.
Because some of this sort of software is sometimes installed intentionally it is often not detected by malware scans.
Please be aware that this sort of adware is not provided by or downloaded with Mozilla Firefox software.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
* [http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]
* [http://www.kaspersky.com/security-scan Kaspersky Free security scan]
You need to use multiple and up-to-date tools as they will not all pick up the same things.
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good FREE permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

Want a wireless video camera that can stream to the Internet...

Similar Messages

Maybe you are looking for