Want an Idea or suggestion .......
Hi
Iam having near abt 30 froms which is to be filled by a single user
and values from first form is required in between first to last form
and i have to calculate totals as well in between these forms..
every form have at least 50 user inputs...
I want to use jsp and javabeans
how shd i pass values from first form to last form perform totals
in between
any idea appreciated
regds
Hi ..
any idea ...
regds
Similar Messages
-
I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and tried all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support
What appears to be happensin is that before the actual download finishes/restore starts. the recovery mode is timing out. I would do a manual download using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Then place the iPod in Recovery mode and restore using the instructions in the link. -
Reinstalling a Premiere Elements 10, I have had for several years. However, now i get "invalid" when the S/N is entered. I have successfully reinstalled this product several times in the past. Ideas? suggestions?
Paragraphs were invented for a reason.
Flinging a giant wall of text up is not conducive to receiving help.
Posting email addresses is not smart.
User to user forum-Apple is nit here. -
I'm wondering if I should update to firefox 5 from firefox 3.6? I use Zotero for my dissertation research and I have lots of stored info in Firefox 3.6 like frequent flier numbers that load automatically that I don't want to lose. Suggestions?
My advice is to stick with Firefox 3.6.x for a while yet, it is still supported.
Otherwise, see the Zotero website for advice about their program and updating to Firefox 5.0 (or 6.0 when it is released in 3 weeks). -
I brought an ipad original from the United states and it doesn't join the wi-fi network here in bangalore. any ideas or suggestions?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
A lot of songs on my Iphone are cutting off several minutes short, and some are just skipping to the next song in the middle of the current song. Any ideas or suggestions would be appreciated.
Go to http://www.apple.com/support/itunes/contact/ and then click contact iTunes Store Support. Then find your issue in the categories and then it will most likely take you to a page with suggested things to do but also on this page should be an option to e-mail them. Just explain your problem and also have the names of the songs that you are having problems with listed in the e-mail so they can help you more quickly. They usually get back to you within 24 hours.
-
[latest macbook pro 15"] there are about 280 GB "other" on my storage, which came from no where. Any idea or suggestion of any fs manager? I am new with Mac OS X, and usually using finder to organize my files. I really don't know where these 280GB "other" came from. this laptop is used for my study, so I haven't used it for downloading vedios or musics which could be extremely large. (what about steam online like youtube? is there any temp folder that need to be cleaned manually in os x?)
Hello daz3
The Other items could be items in the OS X folders such as the System folder and caches, personal information such as documents, contacts, calendar data, App Plugins or extensions, Media files that cannot be classified by Spotlight as a media file because they are located inside of a package, file types not recognized by Spotlight. Check out the article for more information.
OS X: What is "other" space in About This Mac?
http://support.apple.com/kb/HT6047
Regards,
-Norm G. -
Stolen iPod...Ideas, Help, Suggestions,...Sympathy
Hi All!
Bad news and good news. I own two identical iPod Touches, one for home and one for work. The one from work was recently stolen. I have an idea who, but can't prove it. Anyway, this person has downloaded a "free" app because the A Store sent me a receipt, being as its tied to my account and all. They don't have my password so they can't download any "paid" apps thank goodness. Which leads me to ponder, why doesn't Apple require a password for ANY installations on your iPod? Also, if this is the person I think it is, they have a Windows (spit) machine at home. So if they plug my iPod in there then Windows (spit) won't recognize the Mac format I believe.
Is there a way to de-authorize my main account for that particular iPod by serial number, etc.? Maybe thru iTunes so that any downloads from that iPod will not be tied to my account.
Is there a way that you could use a Windows (spit) machine to extract a Mac formatted iPod's mojo? Music, Notes, etc.
How close do the two iPod's have to be for me to use peer-to-peer? I have the latest OS but don't have any PTP apps installed. Is there another way?
Is there any other way that this could be worse for me? I have already changed my home WiFi passwords, etc.
Now for the good news. My Plant Manager wants to replace my iPod! Great!! I'm all for that....but I still wish I could somehow nuke my stolen iPod like I can my iPhone.
Any help would be greatly appreciated. Thanks.
pwilsonPassword protection was enabled about 90% of the time but there were times when I would disable it to let someone use it. I am the ONLY Mac user of over 150 employees at my plant. (Coal-Fueled Power Generation). These folks buy Zune's and such and laugh at how much I pay for Apple products, but everyone wanted to try it out and I didn't want them to hassle with a password so there were times that I would leave work and it be disabled but still securely kept or so I thought. It was stored in a locked office, inside of a locked drawer, inside of a locked storage cabinet and there was really no personal info kept on it just mainly music.
I have tried to contact Apple a couple of times but as usual am having extreme wait times....longer than my patience or my schedule will endure unfortunately. I'll try again later or email.
I am interested in knowing how easily a Mac formatted iPod can be "cracked" with a Windows machine. I am not familiar with any file restoring or recovering apps, etc., for Windows. It may not even be possible.
I do though, wish that Apple would require a password to download and install ANY app, paid or free....maybe add that feature in the preferences. And also permit an iPod to be de-authorized online without that iPod being connected. (Forbidden from purchasing or downloading any files through an Apple account.) I'll pass this suggestion along to Apple.
Thanks for the replies. -
This is totally reasonable. That being said, understanding this is neither a "suggestion" nor an "idea", I was wondering how great it would be if the new Apple TV would have built in Radio Frequency control capability for all HT products. Comcast has RF control with it's new x1 box but it does not work with other components like a DVR, AV Receiver or other HT devices. Logitech offers remotes that one has to program with all the codes per individual manufacturer but this still requires an RF base station and external blasters.
If the Apple had a relationship with the different audio/video manufacturers so that one could simply use an Apple TV remote ( or optionally use ipad, iPhone, MAC ) to control everything HT, then this simplicity would capture a huge audience in a big way!! Of course..........this is not a suggestion or an idea :-).
Faithful Apple Fan, BPACKYou can submit feature requests to Apple customer service.
I was wondering how great it would be if the new Apple TV would have built in Radio Frequency control capability for all HT products.
No idea what you mean by HT devices, but it is unlikely Apple would release a product to support 3rd party devices. On top of which changing the ATV remote to be RF instead of IR would break all the existing remotes that are able to work with ATV. And would be MUCH more expensitve.
Comcast has RF control with it's new x1
Only becasue they HAVE to because they only provide one actual cable box, with other dumb box termtinals. So remotes have to be able to work in other rooms since they all have to connect to the real cable box.
but it does not work with other components like a DVR, AV Receiver or other HT devices.
Right, since once you switch to RF you break compatablity with all the other IR devices out there which is pretty much 99% of them.
If the Apple had a relationship with the different audio/video manufacturers so
Apples whole business model is locking out other manufatures. -
Wanted brief idea about posting date, document date, entry date
Hi guyz!
basically am an tech consultant. But wanted to have brief idea about the following business process. scenario is like this:
in inventory management, we are doing some inter facility transfer. i.e., for a particular plant, we are having multiple storage locations. so due tosome reasons, we are transfering stock from one storage location to another storage location. so in this context can anybody say what are the followings:
1. posting date
2. document date
3. entry date
waiting for proper response.
manasHi Manas,
The Document Date is the date in which the business transaction for the Documente(e.g., a transfer of posting) took place. The document date is the date on which the original document was issued.
The document date can, for example, refer to the creation date of the delivery note issued by the vendor or the internal goods receipt slip.
The Posting Date determines the posting period and defines in which fiscal period a document will post (regardless of the Document or Entry date). It is the date which is used when entering the document in Financial Accounting or Controlling. The periods that are permitted for posting are determined by Accounting Services. This is the date that G/L Account Balances are updated.
The fiscal year and the period for which an update of the accounts specified in the document or cost elements is made, are derived from the posting date. The Posting Date will override the Fiscal Period entered on a document if they are different.
When entering documents, the system checks whether the posting date entered is allowed by means of the posting period permitted.
The posting date can differ from both the entry date (day of entry into the system) and the document date (day of creation of the original document).
The Entry Date is the date the transaction was actually "permanently entered" into R/3.
Note: It is possible that an invoice was issued with a Document Date of 6/15/98, entered into R/3 on 7/15/98 (Entry Date) with a Posting Date of 6/30/98 (to post the Document in the previous fiscal year). Many times, all three of these dates are the same.
Thanks,
Susmitha.
Mark helpful answers. -
Want to become SJCP, suggestions/directions plz
Hello,
this is srinivas gourishetty from india,
iam doing my final year B.tech in IT,
i want to get SJCP certification,
but i dont know any information about it.
can anyone suggest me,
how can i start reading for it, i mean, list of books i should read for it.
what is its fee structure and its rules and regulations.,,
i deeply request SJCP (who already got it) to show me a good path to get it.
i hope u will help me.
thank you.kindly can u tell me wher can i start from that
site,
that site has all images and .......
can u give me exact link from where i can start
(i know iam asking toomuch, but plz help this buddy)
http://www.javaranch.com/certfaq.jspJust where it says "Programmer Certification Study FAQ". -
Any new ideas or suggestions for flattening layer effects without changing appearance
Hello all,
I've been doing a lot of looking around for ideas on how to make my work flow more simple. I regularly run into an issue with layer effects when they are flattened and have been unable to find any good solutions but was wondering if any new developments have come up with the newer versions of Photoshop that I am somehow overlooking?
My main issue is that when I flatten layers in sections or groups (i.e. flatten only 2 or more layers together in a larger composition but not the entire compostion), layer effects with blending modes often flatten strangely. I particularly notice this with drop shadows as I often use a color other than black, usually a very dark shade of the color that is applied to the element the shadow is overlapping. To me it gives it a much more realistic and natural look. When I flatten a layer I notice that it appears the multiply mode is stripped from drop shadow FX unless they are flattened with the nackground element, so if I used a dark blue for example, once flattened the shadow is now a distinct blue shade that appears to be in normal blending mode. I can set that drop shadow layer to multiply to restore it but then I have to keep the drop shadow element on it's own layer seperate from the body of the other flattened content otherwise it inherits the multipoy mode as well of course, which still leaves me with an unwanted layer to deal with.
My curreny solutions range from hiding all other layers and merging visible, which works from some things but not the aforementioned drop shadow issue, I will also keep things that just don't co-operate on their own seperate layer, like the drop shadow and just leave them be if I can. In cases where that isn't an option I will even hide all other layers and comp the portion of the PSD that needs flattened to a seperate TIFF or PNG and import back into the PSD. Sometimes this will work around the issue and make everything interact as desired. It's a lenghty affair though that involves mental acrobatics every time to devise a suitable workaround that I can use for my purposes.
The reason I need to do this often is because I work for a web development company as the designer. Once the design is done sometimes I will do the slicing and prepping for web (not an issue when I do this because I can leave everything as a PSD). When other team members like the web developer need access to the graphics files though, they use Fireworks which means I need a layered PNG so they can slice as needed with the software they are familiar with while maintining transparency where needed.
I know some will say just to use Fireworks then but that isn't a desireable solution to me because I find Fireworks very limiting on the advanced Fx and graphic manipulation. I agree that Fireworks can be very capable and can do very nice things when you're thinking of the design of the entire site in general, but it usually can't do the advanced fx and manipulation I like to use for the "eye candy" portions of the site, especially when you are using mutiple Fx on a layer with their own blending modes. I find it more of a hassle to build a general site in Fireworks and import elements from Phoroshop. Keeping track of proper sizing and constantly loading placeholder background images to photoshop for reference isn't for me!
I have a pretty decent understanding of how the layer flattening works and how the blending modes function (like the fact you can't have mutiple blending modes on a single layer, thus many of the issues with layer Fx blending modes). I am using CS5.5 Design premium and am hoping there have been some advances in working with this type of thing. I know that if I could flatten the drop shadow layer with the layer it overlaps that would solve the issue nicely but this is seldom possible on websites where you have fluid areas that need to change size and the image element with the drop shadow may not always be in the same place on the site background.
It would be awesome if, since you have the ability to apply blending modes to individual layer effects, if Photoshop could have a setting to somehow flatten the layer effects and layer in it's own self containted process and then place the flattened layer within the the PSD as if you imported a transparent image like a TIFF or PNG. This is basically what I do on the extreme side of tihngs manually when needed. It would be great if there was a way to automate that type of functionality.
Does anyone know of any new or good method to deal with this type of thing? Sorry about the long post, I was trying to be as detailed as possible as I know it's sometimes easy to misunderstand what someone is asking with this type of question. Thanks to everyone for taking the time to read/respond!Hi Noel,
Thanks for the reply. The reason I need to do things this way is because of the workflow at my company. I need to be able to convert my photoshop PSD files in Fireworks and have the layers behave predictably. Trying to open a PSD file as is in Fireworks, while keeping the layer flexibility intact usually creates all kinds of chaos, ranging from Fireworks flat out ignoring some layer effects to drastically changing them. I assume because Fireworks way of intrepreting some setting numerically is different than Photoshop and because Fireworks doesn't even have some of the effect properties at all.
The web developers need to have layered PNG files so they can slice re-slice and move elements around as needed white they develop a website. They need to maintain transparency on the seperate elements of the website mockup so that they can reuse and move elements around as needed. At times I end up doing the CSS layout on a site and in those cases it doesn't matter becuase I can work straight from the PSD and export elements straight to PNG files etc as needed. It's when I need to provide the development team with a Fireworks PNG version of the website mockup that I have these issues.
For example and to clarify, I may have a website interface designed that has several fancy buttons or a header element with drop shadows on them or that overlap a background element in some way. If I am doing the coding on the site I can simply hide all other layers than the releveant ones, flatten visible to maintain transparency, save for web etc and I have the element complete with a nice drop shadow ready to drop into the code. If the developers are doing the slicing and layout though, they don't know how to use Photoshop (and aren't going to be learning anytime soon) but they do use Fireworks... so they want the site in fireworks, complete with the ability to hide background elements or other parts of the site that may be in the way of making the proper PNG for that button or other element that maintains transparency AND keeps the drop shadow, the proper color and transparency as well.
What typically happens if I don't flatten each element of the site design before importing into Fireworks is that it will look very different in Fireworks, but being web developers (lol!) they don't notice or maybe even care that something looks weird or appears to be missing a shadow or other effect. Then once the site goes live, the client DOES notice it and I end up scrambling to fix the issue. That usually means going back to the PSD in a rush and trying to flatten all the elements anyway to convert to a nice Fireworks PNG so they can recapture their slices, or taking the slice they used on the website and pasting it into the PSD original so I can make a direct match and converting the element myself after the fact.
In order to avoid these work flow issues and embarrassments I have taken to flattening each individual element (i.e. a button and all of it's effects) of website GUI to ensure Fireworks can't fiddle with it on import. I can then give the web developers a PNG they can slice easily but with all the important elements still completely seperate from one another. If they hide the layer that is the shopping cart button for example, they are going to be hiding the button and it's drop shadow or glow or any other effects. That way it can't be messed up by Fireworks or a developer. With buttons in particular I can't just include a portion of the background where the drop shadow would be becuase that button could end up anywhere on the site in the end. One of the features our business offers clients is a fair amount of flexibility on the CMS side of things to move elements around and create new sections of the site so I need to keep most elements as felxible as possible, preferrably without giving up quality of the artwork.
I feel like I have a fairly solid understanding of why the layer effects act the way they do and how they interact, even if I don't understand fully the math that makes them do what they do. I guess I was hoping that the increasing power in the CS suites, especially in 5 and 5.5 might have made some new work around possible, or that they might have added some feature buried in the menus somewhere because it's not that practicle for many users. I have several ways to work around these issues now, but they are manual and cumbersome, I was hoping there might have been an action script or feature to automate some of this.
I think a really cool thing to be able to do would be to be able to select some layers and have Photoshop copy them and paste them into a new document with their layer styles and all intact, flatten that document with transparency intact and then put the new flattened file back into the original document in the same location on the artboard as a new layer. This is essentially what I do when I hide all the other layers, merge visible and save as a TIFF or PNG and then copy that new file back into my full PSD document. I still experience some color shifting this way but usually not as drastic as when I try to merge directly in the full PSD. OR if that can't work, even better would be to somehow have the effects be able to "float" with the actual photoshop layer, almost like sub layers of that layer, so that each one could have it's own blending mode (and individual masks for each... that would be awesome!) and you could flatten them together somehow when needed and maintain color tones etc. Don't know if this could work though since I don't know what the limitations of the math process that combines the layers are. I would imagine some of it it would be possible, if not worth their time, since smart objects open in their own document window when you edit. I would imagine that some code work on the back end might be able to be applied using a similar method to give extra flexbility of some layer effects in Photoshop. I would love it, I know that!
Hopefully there is at least as faster way if not an ideal work around. It defintely adds to the development cycle of a website to have to go through this step. It's also at a point in the development cycle where the site has been approved and there can be added pressure about why they development team still has to wait on a design that has already been OK'd and should be ready to slice. I have gained understanding with my boss about this and it's worked out OK for the most part, but it would certainly make him happier if I could eliminate that extra step, or reduce the time needed. On a complicated website I might lose half a day of work or more sorting out the various site elements and figuring out how much I can flatten and how and what order to break effects off their layers to maintain appearance. I have tried Fireworks several times as a native solution, but ultimately I feel very restricted by Fireworks and often can't do what I had in mind, although it has gotten better. Also on a psychological level, Fireworks "working with basic shapes" method of desigining a website tends to steer me down that mental path for some reason and I always end up with sites that look much less fluid and organi, much more boxy than when I design in Photoshop. One of our companies selling points is that we design sites that break away from the boxy and simpler web 2.0 look so Fireworks is not really a consideration for me at this point. Thanks again for the help and any respones! -
I want to make a suggestion to Apple
I want to simply make a suggestion to Apple on a modification I would like, but can't find any way to do this. Any suggestions? While working with a client, his phone died (not iPhone) and asked if he could borrow mine to make a quick call. While he was on the phone, I received a text message from, of all people, a competitor of his. Very embarrassing. I would like to suggest to Apple that there be some way to temporarily disable, not only the sound, but the visual notification of an incoming text message.
http://www.apple.com/feedback/iphone.html
-
Want to learn, need suggestions.
I know a tiny bit of C++ and a little more about VB.NET. I'm not entirely new to programming.
I would like to make some lightweight GUI front ends to a few programs, not that they would be super useful to a lot of people, maybe some, but for a fun exercise in learning to code. I was wondering if there were any good IDEs that have, well, I don't know what the word is, but to visually make windows/forms, buttons, and to attach code to those actions, like Visual Studio .NET(i used 2003).
It seems that the "Glade Interface Designer" might be what I'm looking for. I don't care whether its QT or GTK, but I don't want to get kde dependencies, and really don't want to get gnome dependencies. If I had to choose on looks, I might lean towards GTK, but in the end it doesn't really matter.
Thanks,
ZackPython is an excellent language for quick GUI development, thanks largely to the libraries available. Qt and GTK both have Python bindings available, but you should look at Qt first for its well-polished GUI builder.
-
Added Hybrid SATA drive to ThinkCentre - does not recognize old IDE drive - Suggestions?
I added a 1TB Seagate Hybrid drive to my old ThinkCentre 808532U. I removed the jumper from the old IDE drive so it would be considered the secondary. I installed Windows 7 Professional 32 bit on the hybrid SATA. The old IDE had Windows XP. I want to use the old IDE drive as the secondary so I can access the data, pictures, etc. I do NOT want to boot XP. The system boots up fine with Windows 7. However, the system does not recognize the old IDE drive. I have gone into BIOS and changed the Parallel ATA to Secondary. The system still does not recognize the old IDE drive. Can someone provide recommendations? Thanks,Napp
I finally experimented enough that I found the solution! I tried putting all the IDE drives into Startup even though none showed any hardware assigned. I set Parallel ATA to Both. My machine would start up but not show the Logo screen or any screen for that matter. I put a Windows 7 install disk into the DVD ROM and got the Logo screen. I F1'd back into BIOS and suddenly two of the IDE entries in Startup were populated with the DVD drives. I set the order I wanted in Startup and saved the configuration. When Windows started it installed drivers for two devices. I looked into Computer and all the drives were listed!!!!!!!!!!! So now after several long nights I have my system configured properly for all the drives and all Windows 7 updates applied. I am waiting for delivery of a 256M graphics adapter and a gigabit ethernet adapter to see if I can increase performance. Time to sleep now..............
Maybe you are looking for
-
How to restore MAIL and ability to update software
By accident, I erased all website data. Now no MAIL and no updates.
-
when I m phoning I cant change the mute, it does not react. Has this anything to do with a speaker or how can I change this? As you see, I'm a newbee at this.... grts Pim
-
How do I find an activation code so I can use Netflix on my ipad2?
Netflix is asking me for an "activation code" for my iPad 2. What is this and where can I find it. I want to be able to watch videos instantly.
-
Division of random numbers, see if the result is an integer.
Simple and yet cant find an easy way around it. I have 2 RANDOM numbers coming in, I'm dividing them and I want to see if the result is an integer or not. Basically I need to see if the divison of the 2 random numbers provides a whole number. Who wan
-
I would like to get one of these apps, but looking at them both, they seem to do the same things. Is one better then the other? -Sin