Want firefox as a stand alone, not for yahoo

firefox for yahoo does not help
how can i get a stand alone firefox?
thanks

Check your Windows Control Panel > Add or Remove Programs for anything related to Yahoo and for anything that you don't recognize (sometimes "things like that" are named differently that what you might expect).
Then remove it or "them".
Also check the Firefox Addons Manager. {Ctrl + Shft + A}

Similar Messages

  • Stand alone installer for flash player

    Is it still possible to download a stand-alone installer for Flash Player (or any Adobe product)?
    I really, really, really, really have NO interstes in any download manager.  All I want is an installer I can just download.  There used to be an ftp site that had up to date software that could simply and easily be downloaded, but I couldn't find any current software on that site.  Where should I be looking?

    You can make a bootable USB stick to install using this free program.
    Bootable USB Flash Drive – Diskmaker X

  • Stand alone installer for Yosemite

    Is there a stand alone installer for Yosemite?  I have extremely slow internet access and the download fails repeatedly from Software Update.
    I would like to download at work and bring to my computer as taking my computer to work is not an option.
    Thanks
       ...lane

    You can make a bootable USB stick to install using this free program.
    Bootable USB Flash Drive – Diskmaker X

  • Independent Stand-alone calculation for each Crosstab

    Hi All,
    In my report, I have two crosstabs in two different report header sections. In the first crosstab, I have Division and Company chars.
    In the second crosstab I have Category and Company chars. I have one key figure (KF) in both crosstabs.
    My expectation is to see independent, stand-alone results for these two crosstabs. But this is not the case..
    Sum of Company X in the second crosstab (which is for category level) is displayed in the first crosstab (division level) for Company X.
    But in my scenario, Company X has a different value in division level..
    When I remove the second crosstab (category level) and refresh the report, then I see correct values for Company X in division level.
    How can I tell the CR that each crosstab should run separately, without being influenced from other ones?
    Below, I tried to show the issue..
    Crosstab1:
    Division A...........100
    Company X..........55  -
    >  This is sum of below crosstab values (for company X).
    Crosstab2:
    Category C........60
    Company X........20
    Company Y........10
    Category D........40
    Company X.......35
    Company Y.......5
    Thanks
    Ozan

    Hi Ozan,
    One of your crosstab will need to be a subreport.  The reason they both show the same result is they are both using the same recordset.  Your second crosstab needs to be run as a result of the Company in Report1. 
    Try creating a group in your report and drop the first Crosstab into the GroupHeader. 
    Now create a new report that matches your second Crosstab.  Insert this new report as a subreport into the GroupFooter. 
    That should give you the result your looking for. 
    Good luck,
    Brian

  • No Stand alone GWCHECK for Linux PO

    HI,
    I need to use a stand alone GWCHECK for a linux based PO. The GWADMIN version does not seem to work with the RESETMAINTFLAG on the user as I need to put in the database name.
    Anybody know if there is a stand alone version of GWCHECK for a LINUX based Server?

    Originally Posted by stevencodling
    HI,
    I need to use a stand alone GWCHECK for a linux based PO. The GWADMIN version does not seem to work with the RESETMAINTFLAG on the user as I need to put in the database name.
    Anybody know if there is a stand alone version of GWCHECK for a LINUX based Server?
    We include the binaries as part of the base server install. After installing the server install, you can find the binaries at the following location:
    /opt/novell/groupwise/agents/bin/gwcheck
    /opt/novell/groupwise/agents/bin/gwcheckt
    Pam

  • I´m a Registerd user of Lightroom since Version 1,can i update from Version 5.7 to Version 6 (Stand Alone,not CC)?

    Can i Update from Versión 5.7 to Versión 6.0 Stand Alone,NOT CC.?

    Your 2009 iMac’s fastest port is FW800 and an SSD will be somewhat faster than the internal drive but it won’t provide anything close to the full benefit of an internal SSD or the newer faster USB3 and Thunderbolt interfaces. For example FW800 provides roughly half the bandwidth of USB 3. Installing an SSD internally isn’t for the feint of heart and it requires a couple special tools including suction cups to remove the glass front. But if you have a local independent Apple reseller you can almost certainly get it done there.
    If you do decide to investigate this, I’d recommend going with a 128GB drive which would ensure you have plenty of room for the operating system and all your Applications and temporary files. Then use an external FW drive for user directories. You are likely to find the 64GB drive to be quite cramped.

  • QuickTime stand alone not playing video, only audio

    Am running QuickTime stand alone on my PC with Windows XP Home 2002. For some reason the .mov files that were created with my digital camera will not play video (only audio) on this computer. The files seem to play fine on other computers. Have also found out that I can play downloand or streamed videos (only audio).
    Can't figure out why video won't play. Other video formats (.avi for example) play fine through Windows Player.
    Any insight? . . . anyone?

    Am running QuickTime stand alone on my PC with Windows XP Home 2002. For some reason the .mov files that were created with my digital camera will not play video (only audio) on this computer. The files seem to play fine on other computers. Have also found out that I can play downloand or streamed videos (only audio).
    Can't figure out why video won't play. Other video formats (.avi for example) play fine through Windows Player.
    Any insight? . . . anyone?

  • Stand alone client for remote EJB corba error

    Regarding problem below, I've checked System env variables
    that weblogic server is using for CORBA classes:
    javax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl
    org.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB
    org.omg.CORBA.ORBClass weblogic.corba.orb.ORB
    javax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl
    But these are server classes and not found in wlclient.jar and wljmsclient.jar. What classes should be used for client? What needs to be set in order to get successful remote RMI/EJB call to weblogic server?
    Original post:
    I have a stand alone spring client for simple stateless session EJB deployed on weblogic 9.2. I'm using spring (jdk 1.5) to call this remote EJB and the only way I can succeed is to have full weblogic.jar in my bootstrap classpath. Otherwise I get corba error:
    CORBA BAD_PARAM 0 No; nested exception is:
    org.omg.CORBA.BAD_PARAM: vmcid: 0x0 minor code: 0 completed: No
    Interestingly, within same client I have JMS call to weblogic JMS and that fails if weblogic.jar is in boot classpath. Getting rid of weblogic.jar from boot classpath works if I have wlclient.jar and wljmsclient.jar in regular classpath (as per weblogic docs). I would think that for stand alone client all I would need is to weblogic client jars, why should I need to have full weblogic.jar?
    I can't get those work together with same classpath. I wonder if anybody has some pointers and/or advice. I was looking to set system parameters for corba for weblogic client that maybe could help:
    org.omg.CORBA.ORBClass
    org.omg.CORBA.ORBSingletonClass
    javax.rmi.CORBA.UtilClass
    javax.rmi.CORBA.StubClass
    javax.rmi.CORBA.PortableRemoteObjectClass
    But I can't find definitive answer.
    Regards,
    -pp
    Edited by mr.papini at 06/28/2007 9:05 AM

    I'm stuck exactly with the same issue while trying to port my application from weblogic to jboss.
    I tried to specify different ORB implementations (JacORB, OpenORB) for jvm option org.omg.CORBA.ORBClass, but JBoss couldn't get them instantiated. Native Sun implementation which is used in JBoss by default and can be instantiated, apparently is not fully compatible with weblogic security module.
    So did you manage to find out the solution?
    Edited by DigitalDude at 04/09/2008 11:47 PM

  • How do I copy albums in iPhoto to a stand alone drive for backups

    How do I copy albums in iphoto to a stand alone hard drive for backup?

    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • Stand alone charger for MBP batteries

    I'm looking for a free-standing battery charger for my spare MBP batteries. Are such beasts made and if so, who makes the best one. It is really a pain to have to charge a battery on the computer, pull it out, and then stick another battery in to charge it. It is kind of a waste of lots of valuable time.

    have you solve your problem? i have the same problem too.

  • BPEL PM Stand alone designer for bpelz_0.0.96

    I wish to operate the BPEL PM designer on a different machine than server. I found an example for the same at www.oracle.com/technology/products/ ias/bpel/htdocs/orabpel_technotes.tn005.html but that was for an older version bpelz_0.0.8. I want the same for bpelz_0.0.96... plz help

    Make sure that the BPEL server configuration in the designer is not defined. That is, all the fields are blank.
    You can set that in Eclipse Window -> Preference -> BPEL

  • Stand alone tool for 3 way merge [SOLVED]

    I'm looking for a standalone tool for a base - contributor - target merge. Use case is: I have old.source, old.patches and new.source. After patching new.source with old.patches there will be rejected.patches. Then I want to do a 3 way merge between (a) old.source patched with accepted patches, (b) old.source patched with all patches and (c) new.source patched with accepted patches.
    What's a good tool for that, or (even better) is there a tool supporting the workflow above?
    I know that this is part of every version control system, but it seems like an overkill to put things under version control just for this.
    Last edited by grey (2009-10-21 13:43:15)

    kdiff3 looks good, esp. this bit:
    Special case: Files with the same name
    If all files have the same name but are in different directories, you can reduce typework by specifying the filename only for the first file. E.g.:
       kdiff3 dir1/filename dir2 dir3
    plus the fact that they have a whole chapter on recursive directory merges in the documentation. And the fact that they *have* documentation - not a given with KDE apps these days.
    Thanks!

  • Setting up CIMC on C220 stand-alone server for LDAP authentication.

    I'm trying to setup the CIMC so that all users who require access to the console of the server have to be authenticated by Active Directory. I have placed my authenticated users in an AD group called "APAC IT Administrators".
    Here are the fields I have so far:
    Enable LDAP: Checked
    BaseDN: DC=mydomain,DC=com
    Domain: mydomain.com
    Enable Encryption: Checked
    Time Out: 60s
    Configure LDAP Servers: Checked
    Server 1: 10.0.0.100
    Port: 389
    Server 1: 10.0.0.101
    Port: 389
    Binding paramters:
    Method: Login Credentials
    Search Parameters:
    Filter Attribute: sAMAccountName
    Group Attribute: memberOf
    Attribute: CiscoAVPair
    LDAP Group Auhtorisation: Checked
    Index: 1
    Group Name: APAC IT Administrators
    Group Domain: mydomain.com
    Role: Admin
    I've read here (http://www.aaviso.com/tech/?p=94) something about having to create a new attribute for domain users then assigning the attribute to the specific users, which I have not done so far as I do not have permission to do this and needs to be done by a higher source, but would this be the reason I cannot get the CIMC logon to authenticate against AD? Is there a log I can check to see what the problem is?
    When I try to log onto the CIMC using the format "mydomain\myusername", I get the error "Login failed. Verify that your username and password are correct."
    CIMC is version 2.0(3e).
    Thanks.

    Ingo thanks very much for replying..
    We called up BusinessObjects Service to ask where we can download the SAP Integration Kit for Crystal XI but they had didnt have a solid answer for us.
    We have the SAP GUI and also installed the Crystal Reports Designer XI from the CD.  Also the installation of Crystal XI prompted me to download SP1 from internet and we did that.
    As a result of the Service Pack installation another SAP component got installed called the "SAPInteractiveXL1" which is excel based.  There is a connection SAP icon toolbar in SAPInteractiveCl1 but when the SAP GUI pops up and I input my logon information it just says says "Connecting..." and the excel just hangs....
    So right now I have no clue where to get
    - Client components from the BusinessObjects SAP Integration Kit

  • Stand-Alone exe for Windows

    Hi -
    I would like to use Java to create executables that will run by themselves with their own icon in Windows 2000 prof. - preferably without any other software installed. I am learning Java but at this point I am confused by all the choices for compilers, interpreters, GUIs, IDEs, etc.
    Which of these elements and which versions will I need?
    Thanks,
    dppatt

    I don't think it's worth doing this. If all you want is a standalone installation that has an icon shortcut, you can do all of that with the JVM.
    1. Distribute the JRE in your application. Installs are for suckers. You don't need them. Create a subfolder in your application direcory and put the JRE you want to use in it.
    2. Write the java command to run your app using the jre from 1, don't just use java because you have no idea what the user has installed.
    3. Create a shortcut in windows. Right click, open properties. Select your icon. In the target, enter your java command but use javaw instead of Java.

  • If you want customer service, this platform is not for you...

    Terrible technical support - no replies in the forums. The online chat people dont know crap and mainly only are there for sales. We had considered using this platform with our 100+ clients but I seriously doubt it now with the lack of REAL customer service like other hosting companie can offer.
    Tom

    I have actually experienced the opposite - great customer service/support. Keep in mind that these are user to user forums not actual tech support. Although we are very lucky to have much of the BC staff participating.

Maybe you are looking for