Want help with BADI'S ?

Hi experts,
I m new to BADI'S.I got a requirement to get a sub-screen to the standard transaction MFBF.The subscreen will be having 2 fields personnel number and personnel name. For this the functional guy told me to activate the badi rm_hr_integration to get the sub-screen.If the badi is activated he said we get the above mentioned 2 fields as columns in the table control in the selection screen of transaction MF42N. What should i do to activate the badi?If i activate the badi will i get the require sub screen?Do i need to write any additonal code?
Please anyone suggest me the soln with some procedural steps.sloutions will be rewarded with points.
Thanks,
dp.

Go to transaction SE18 and display the BAdI definition. Read the documentation which will explain what this BAdI does and even tell you how to create an implementation and where do you find additional help/documentation regarding BAdIs.
There is also a sample code which is available in SE18 via Goto -> Sample code -> Display.

Similar Messages

Want help with badi implementation?

Hi experts,
I m new to BADI'S.I got a requirement to get a sub-screen to the standard transaction MFBF.The subscreen will be having 2 fields personnel number and personnel name. For this the functional guy told me to activate the badi rm_hr_integration to get the sub-screen.If the badi is activated he said we get the above mentioned 2 fields as columns in the table control in the selection screen of transaction MF42N. What should i do to activate the badi?If i activate the badi will i get the require sub screen?Do i need to write any additonal code?
Please anyone suggest me the soln with some procedural steps.sloutions will be rewarded with points.
Thanks,
dp.

Hi Nagaraj,
Thanks for the reply. I created the implementation for the badi and activated the badi.Then i run the transaction MFBF to see whether i got a subscreen but i there is no change.In the implementation of the badi there is a tab for subscreen.In that tab there are some fields to fill.The fields call program and screen no are filled automatically with values SAPLBARM and 800 respectively.There are 2 more fields to fill called program and screen no.What i have to fill in those fields?any suggestions?
Thanks,
dp.

Wanted: Help with thread in spanish; guitar not recording

Can someone please help with this thread?
GarangeBand No Reconoce Mi Guitarra Audio
The op has trouble to connect his guitar. I cannot interview him in spanish, and he does not know to ask in English.
Appriciate any help.
Léonie

Hi Borris12,
I'll clear this up for you and let you know whats happened.
Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
Just send to the email address in my profile and mark FAO Craig please.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Help with badi activation

Hi friends! I want use badi definition BADI_J_1BECD for transaction J1BECD. To do this, I have created implementation on SE19 with definition "BADI_J_1BECD" and coded method "Fill entire register I051", but I cannot debug it even putting Break-point in this. I tried debug with SM50 (fake loop) but without sucess. I'm forgetting anything?
My release is 4.6c.
Thanks for any help.

I found the problem! In release 4.6c has a parameter p_bapi with 'X' as default value that block bapi calls.

Want help with "Could not set up your CS Live account. Try again later."

Hi Folks
I've got an NFR of CS6 and I'm trying to give Adobe Story a shot.
Seems it requires online content and a CS Live account to do anything.
But when I try to create one it dies with the error message:
Account setup not completed
Could not set up your CS Live account. Try again later.
Can you help?
Joe
UPDATE: Downloaded update and that fixed things.
However, turns out my NFR of CS6 Production Premium doesn't allow me to use Story.
And here all I wanted to to do try out the transcription features of Premiere Pro.
Without a script it's complete gobbledygook. Would like to try it with a script but it appears I need Story to convert my PDF to Adobe Story format.
Oh well.

I ran into the same problem you did, Joe. I just realized Story is all online now. Story.Adobe.com

Need help with BADI..

hi,
in VA02 when i delete a sales item, i need to check something and if that validates to true, i dont want to allow the user to delete that item.
i was able to trace up to a level where when user clicks on the minus icon in the materials window and confirms by clicking Yes, a BADI called BADI_SD_SALES_ADDON is called.
but SAP fails to get a handle of it's class which is CL_EX_BADI_SD_SALES_ADDON. I am not sure how i implement my code inside this class!! I cannot implement BADI_SD_SALES_ADDON as SAP does not allow me to do so.. what shall i do ?
i think if i make SAP to get the handle of CL_EX_BADI_SD_SALES_ADDON then if i write my code inside this class as an implicit enhancement ?? I am not sure.
any suggestions please ?
thks

Hello,
See these:
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
The new Enhancement Framework Part 2 - What Else You Need to Know Before Building an Enhancement
How To Define a New BAdI Within the Enhancement Framework - Part 3 of the Series
How to implement a BAdI And How to Use a Filter - Part 4 of the Series on the New Enhancement Framework
The last link shows step by step how to create a BADI implementation.
Regards.

Edit, blur, move, crop, light, or create -- which one do you want help with?

To get a feel for the kind of learning we should prepare for Photoshop CS6, we're running another poll. Would you take a second and cast your vote?
http://forums.adobe.com/polls/1107 Thanks!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Help with badi

Is it a good idea to use function modules in badi custom code
i am trying to modify one of the infotype records (0004) using badi but the field is not getting updated , im using func mod HR_INFOTYPE_OPERATION.
Can u suggest any alternatives?? Help will be much appreciated...

Hello Vinay
Unfortunately you did not reveal the most important detail for answering your question:
Which BAdI are you using?
Assuming that you perhaps use BAdI HRPAD00INFTY (Update / Infotype maintenance) then you can see from the signature of the interface methods (IF_EX_HRPAD00INFTY; on ECC 5.0) that none of them is intended for changing current data of the transaction. On the contrary, all method parameters are IMPORTING parameters and are called BY VALUE. Thus, no changes of the parameters within the interface methods will be transmitted to the caller.
Method IF_EX_HRPAD00INFTY~AFTER_INPUT is the only method having an exception which implies that this method can be used to perform checks (compare PBO vs. PAI data) and reject changes by raising the exception.
Final remark:
It is complete nonsense to commit work within a BAdI because the BAdI is called within a transaction which should be properly committed at the end of the transaction.
Regards
Uwe

I want help with buying a product

I am registered in Austria but now live in the Netherlands for a few months. I want to buy a product but cannot change the country in my profile. I am told to contact customer service. And there seems to be no way to do that.

You can contact customer support via chat from http://helpx.adobe.com/contact.html
Start by selecting the product you want to purchase.
But I believe the country cannot be changed in your profile; most likely they will tell you to temporarily create a new profile with your current country.

Wanted: help with creating overlapping arc selections

I use Elements 6, make album pages, and want to replicate a design I have seen. There is a background image. Around the edges are several overlapping arcs which "frame" the image. Each arc has a white stroke outline and is a different color (obviously pulled from the background image). The interesting thing is that where two arcs overlap the stroke outlines of both arcs are still visible, and also the section within the overlap has a third color. My questions are:
1. How do I create the arcs in the first place? I tried extending the canvas, creating ellipses and moving parts of them over the edge of the background image. This worked for the first arc, but Elements balked at doing more! Should I create arcs on separate files and move them over?
2. Once I have two arcs overlapping on a page, how do I retain visibility of both their stroke outlines? And how do I select the overlapped area in order to recolor it? How do I make different layers opaque and transparent at the same time, and only show the parts I want visible? What tool(s) do I use?
Does anyone know? Or is this something too advanced for Elements? Thanks. MH1071

You could use the ellipse shape tool to make the arcs. Drag out an ellipse shape; arching the top to taste. Click on the subtract from shape icon in the options bar and use the ellipse tool again to cut the ellipse.
Use a clipping mask to clip your image to the shape. See this link:
http://www.photokaboom.com/photography/learn/Photoshop_Elements/layers/layer_groups_clippi ng_masks/1_layer_groups_clipping_masks.htm
For the outlines, each shape and use the stroke command (edit<Stroke) to stroke each shape. Note: Stroke will not be included in the clipping group...put it in a blank layer above the clipping group. (On PC, Ctrl click the shape thumbnail will select the shape.) To get the strokes the way you want, you may have to experiment with their position in the layer stack.
For the solid colors, you can clip solid fill adjustment layers to the shapes. This is nice because it makes experimenting with color very easy. Just double click the color fill to bring up color picker and swap out color.
Here's an example of what I mean. My layers palette UI will look different as I did this using Photoshop. Everything done however, would be done exactly the same way in Elements.
Edit: For the olive green solid color fills, I used selections of the arc shape to mask the area I wanted blocked in with a solid color. (Use black paint to hide color; white paint to show color) This is why it isn't in a clipping group. (You could but I didn't in the above example.

Need a help with BADI.

Hello,
I have a query. I need to call a screen with a field from a BADI. Doing that gives me a dump. Is this possible? Can any one kindly suggest on this.
Thanks,
Ganesh

Hi Ganesh,
Can you please let me know which BAdI are you using.
Is it with SRM-EBP ? Or can you post your error dump to have a look.
Regards.
Pras Durafe.

Virtual kf's and help with BADI

Hi all,
How are you? Could somebody who has worked with virtual characteristics and kf's send me the scenarios and screen shots and also the badi code implementation to my mail id.
[email protected]
Thanks and all the best
Prathibha Eluri

I found the problem! In release 4.6c has a parameter p_bapi with 'X' as default value that block bapi calls.

I don't want a discussion. I want help with returning a borrowed ebook via digital editions

I need help returning borrowed ebooks in athe new version of digital editions. I just get error messages.

Then you should ask in the Digital Editions forum; this is the Reader one.
http://forums.adobe.com/community/adobe_digital_editions

Wanted: Help with Signed Applet Tutorial

I'm trying to follow this tutorial and I'm confused about the file name of the policy file.
[http://java.sun.com/developer/onlineTraining/Programming/JDCBook/signed.html|http://java.sun.com/developer/onlineTraining/Programming/JDCBook/signed.html]
Below is the code that goes into the policy file (from the above URL). Now where do I put it on a windows machine? %HOMEDRIVE%%HOMEPATH%? What do I specify as the keystore?
How do I edit it for a windows machine running cygwin?
Thanks,
Siegfried
{keystore "/home/ray/raystore";
// A sample policy file that lets a program
// create demo.ini in user's home directory
// Satya N Dodda
grant SignedBy "company" {
permission java.util.PropertyPermission
    "user.home", "read";
permission java.io.FilePermission
    "${user.home}/demo.ini", "write";
code}

I believe that you can find the necessary details in this tutorial:
[http://java.sun.com/docs/books/tutorial/deployment/jar/signindex.html]

Help with HP Instant Ink

Dec 8, 2014 32 pages Dec 10, 2014 3 pages Dec 11, 2014 15 pages Dec 13, 2014 8 pages
I was having problems wth my printer and on Dec 8th kept trying different solutions to print the 32 pages were not usable and now I am close to my page limit for the month. Is this going to happen every time I hit a glitch? I installed my 1st new cartridge tying to get it to print right which activitated my HP Instant ink and my 1st cartridge wasn't even empty yet!

Hi Nanaberry,
Sorry to hear you are having some printer problems. If you still need help in solving printing issues please contact the HP support for printers at: http://support.hp.com/us-en/contact-hp
If your printer issues are solved and you want help with the issues below in regards to your Instant Ink account then please contact HP Instant Ink support and they will be happy to help you with the issue.
You have a couple options for this
1. Go to the weblink below and fill out the form to start a chat with an agent
https://support.hp.com/us-en/contact-hp/product/HP-Instant-Ink-series/5264756/model/5401249
2. Call 855-785-2777
Let me know if you need any other help and if this post helped you.
Thanks,
JillSa
I am an HP employee.

Want help with BADI'S ?

Similar Messages

Maybe you are looking for